Photon Fixes and Mods **BEING UPDATED** - Motorola Photon 4G

FIXES AND MODS ONLY
SINCE MIUI V4 HAS BEEN BASED ON CM9, MANY OF THESE FIXES MAY WORK
DO NOT ASK QUESTIONS WITHIN THE THREAD
We already have the entire CM9 main thread overrun by repeat questions.
If you have a question regarding something on here, Private Message either myself or the persons I am crediting so that we may help you without mucking up this Thread with "Can you help me with this?"
Feel free to add Mods and Fixes that you feel might be useful for others.
If you didn't make it, be sure to give credit to the person who did.
Please also post a link to their original post so others can thank them for their work.
Thanks to everyone who developed these fixes and to the devs for putting together a great ROM for our phones.
FYI...I DID NOT MAKE THESE MODS OR FIXES (UNLESS I SPECIFY THAT I DID PUT SOMETHING TOGETHER). PLEASE GIVE THANKS TO THE PEOPLE WHO CAME UP WITH THESE FIXES AND MODS

Proper Flashing of ROMs (updated 9/6)
PROPER FLASHING OF ROM
Requirements:
Photon 4g-Must be rooted, unlocked, and have CWM on it (I recommend Jokerax's CWM V3)
A ROM ZIP
Gapps .zip
If you have already rooted, unlocked, and CWM'ed, skip 1-4
1) FIRST, go HERE and watch this video. It's how to install Android SDK. This will be important if you mess something up later and need to reinstall SBF. It also allows you to flash CWM to your phone.
2) Unlock Bootloader: Watch the video HERE. The links to the files you need will be in the "show more" area of the video. This will have you unlocked and ready for next step.
3) Rooting/CWM: Watch the video HERE. The links to the files you will need will be shown in the "show more" area of the video. Now you will be rooted and have CWM on your phone
4) Joker's CWM: Since this was made with his CM9 build in mind, I recommend using it for all your CM9 flashing needs. Using other ones can cause problems.
YOU HAVE BEEN WARNED.
Go to Joker's site (Jokersax.com) and download the "cwm-non corrupted" in the "Cyanogenmod9 for Photon 4G" section, placing the file on somewhere on your phone you can easily find (I usually create a folder in my SD-Card called "ROMS".
Boot into your recovery and select "install zip from sd card"
Find the CWM .zip where you put it, and flash it.
You will now have Joker's CWM on your phone and be ready for flashing
NOW YOU ARE READY TO FLASH
PROPER FLASHING:
STANDARD FLASH ROMS
1) Place ROM zip onto storage on your phone (of your choice)
2) Reboot into recovery
3) Make a Backup (if you don't, it's YOUR bad if you mess up...)
4) Use Wipe All Zip found HERE
or
Wipe /system, /data, /cache manually
This is recommended...some roms you can get away with just Cache and Dalvik wipe, but many require the full wipe treatment
5) Flash Rom zip
6) Flash Gapps (optional)
7) Reboot and Enjoy
AROM BASED ROMS
1) Place ROM zip onto storage on your phone
2) Reboot into recovery
3) Make a Backup
4) Go to Advanced Menu
5) Choose Report Error
6) Choose Show Log
7) Choose Reboot Recovery
***THESE 3 STEPS SHOULD BE DONE ANY TIME YOU FLASH AN AROMA BASED ROM***
8) Flash Rom zip
9) Inside rom, you can choose your wipe option and other options.
10) Install
11) Reboot and Enjoy
CHEERS!

MMS "fix" (updated 9/6)
cm10 mms fix
NEEDS
1) THIS -apns-conf.xml file that has proper apn settings
2) Tools.zip <--located here
3) Patience
How to Fix:
1) First you will need to edit your framework-res.apk using the How To HERE
2) After decompiling framework-res.apk, you will go to folder /res/values
3) Open file arrays.xml
4) Scroll till you see a section that looks like this : <array name="config_cdma_dun_supported_types" />
5) Change it to this:
<string-array name="config_cdma_dun_supported_types">
<item>default</item>
<item>dun</item>
<item>mms</item>
<item>supl</item>
</string-array>
6) Save the file
7) Go to bools.xml
8) Find line that says : <bool name="config_mms_content_disposition_support">true</bool>
9) Change it to : <bool name="config_mms_content_disposition_support">false</bool>
10) Save the file
11) recompile the framework-res per the above how to....do not skip any steps.
12) Insert the framework-res.apk into THIS file and flash it to your phone in CWM
13) go to the build.prop in your phone in Root Explorer or Root Browser
14) Edit the following lines:
# CDMA Carrier support - Native carrier is Sprint
#ro.cdma.home.operator.numeric=310120
#ro.cdma.home.operator.alpha=Sprint
#ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
#ro.cdma.otaspnumschema=SELC,1,80,99
#persist.radio.cdma.min=0
15) Change it to look like this:
# CDMA Carrier support - Native carrier is Sprint
ro.cdma.home.operator.numeric=310120
ro.cdma.home.operator.alpha=Sprint
ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
ro.cdma.otaspnumschema=SELC,1,80,99
persist.radio.cdma.min=0
16) Save the file
17) Place APN-conf.xml above into your /system/etc folder using root explorer or root browser
18) Go to app section of system settings and clear data
19) Reboot into recovery
20) Fix permissions
21) Reboot into your phone and you're done!
EASY, RIGHT?!

E-Z WIPE ZIPs (updated 9/6)
Hope you all like them...
Wipe-All.zip
Go to the site to download the file
WIPE-ALL.zip
Formats:
/Cache
/System
/Data
Dalvik-cache
WIPE-CACHE-DALVIK.zip
Formats:
/Cache
Dalvik-cache
Just CWM flash them like any other zip. MUCH faster and more reliable than manually doing it...not to mention no chance of accidentally formatting wrong partitions

Version 0.3.1
THIS IS FOR ANYONE WHO FULLY WIPED BEFORE INSTALLING 0.3.3 AND ARE HAVING DIFFICULTIES WITH IT NOT BOOTING (OR IF YOU JUST WANT TO RUN 0.3.1 ON YOUR PHONE INSTEAD
Photon CM9 0.3.1
If you run into issues with 0.3.3 not booting up after doing a fresh install, do the following:
1) Format /System, /Data, and /Cache (can use the Wipe-All-Photon.zip in POST 6 for this)
2) Flash 0.3.1 from above link and Gapps
3) Reboot and allow phone to come to main screen but do not sign in, reboot back into recovery
4) Wipe /Cache and Dalvik (can use Wipe-Cache-Dalvik-Photon.zip in POST 8 for this)
5) Flash 0.3.(2, 3 +++)
6) Fix permissions
7) Reboot...should work now

Full-wipe-zip
do not use this before 0.3.2 if coming from 0.3.1 or else you may not have your phone boot

Inverted Apps and Keyboard
Inverted Apps and Keyboard
I didn't make em...just put em into a CWM flashable zip.
Big Thanks to XCellPhoneSalesRep for posting these in CM9 main thread:
Calculator
Calendar
Email
Google Reader
Google Voice
Music
Phone
Google Plus
Talk
You Tube
Big Thanks to moonzbabysh for posting these below
Inverted Keyboard
Dropbox
Pandora
Big Thanks to hello00 for the following: Thank him HERE:
Gmail
MMS
Facebook
Contacts
Google Quick Search Box
Genie Widget
Big Thanks to whomever posted the Widget App Picker...not sure who posted it
All Apps work. may get a FC on first usage...go to "system settings", "applications", "all", force stop the app, then clear data. App should restart without any problem.
.zip will wipe cache and dalvik for you, so you don't need to unless you feel like doing it doubly
Inverted_Apps_Photon.zip
Cheers!

Cache and Dalvik Wipe
Really no biggie...this just wipes Cache and Dalvik with a few less button presses
Cache-Dalvik-Wipe-Photon.zip
Go to the website to download the file.
Cheers!

Here are a few ICS themed apks for Cm9, I did not create these just been going through every phones subsections scouring for ICS themed apks
Gmail and LatinIME.apk need to go into system/app
Clear cashe and data before renaming the preinstalled ones with ".bak" as back ups.
Dropbox and XDA(free version) can go in data/app
Make sure to fully uninstall Dropbox and XDA apps if you've already have them installed before installing these themed apks.
When I get to a computer later and have a bit more time, I'll find the threads that I got them from so proper thanks can be made to them.

ICS themed apks for Cm9,
http://forum.xda-developers.com/showthread.php?t=1472528
hello00 said:
Hello everyone..I would like to share some of the stuff..I have themed almost every google application for those who like black & cyan. If you are going to use my themed applications for whatever reason, please make sure to give me credit..If you guys have any questions don't hesitate to ask.​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Google+
-Email
-Gmail
-MMS v2 & v3
-Google Voice
-Dialer
-Facebook 1.8.2
-Contacts v2
-Google Music
-Keyboard
-YouTube (Newest)
-Gallery
-Market 3.4.4
-Calendar v2
-Geniewidgets
-Browser
-Camera
and some other stuff..
more to come!! stay tuned​
black&cyan theme Apps of each one of these are down below for download​
I update every app when I got time, make sure you download the latest version for new changes..​
For the newest Gapps (2.16.2012.) please see post#5​
-Screenshots​
Google+​
Email​
Gmail​
MMS​
MMS v2​
MMS v3
GoogleVoice​
Dialer/Contacts v1​
Google Music​
Calendar​
GenieWidgets​
Keyboard​
Facebook 1.8.2
-Download-​
For ICS 4.0.3 AOSP CyanogenMod 9 Only v2, it won't work if you are running any other version of ICS other than this​
http://www.mediafire.com/?abhuwize1jc2u9x​
This is for ICS Sense 4.0.3 Beta 01
http://www.mediafire.com/?5lb32b6xs78wiif
For Wallpaper go to post #16​
How to Install​
You always wanna do a backup just in case​
Just flash it like you would flash a rom​
Posts that do not contribute to progress are not useful because they make it complicated to find relevant information for people who can help..
Click to expand...
Click to collapse
MoPhoACTV Initiative

Ok, hopefully this can stay as a fix here.
For CWM I also remember reading that Romeacer's 5.0.2.7-photon3 could also be used. I understand that it may also be linked on Jokers site. Later versions will not work.
I'm a MoPho-er

ICS Pandora
ICS themed Pandora, I didn't make this,
got it from http://www.droidforums.net/forum/yakitori/198676-ice-cream-sandwich-themed-pandora.html

This is an ICS themed Application Widgets picker, I think this should actually be incorporated into the next Beta build personally.
Download and Install like any other regular APK
Long press on home screen (or press Menu softkey, then select "add") to bring up "add to Home Screen" menu.
Select "Widget"
It'll promt you the option to choose the built in Widgets picker or the new one, click the "use by default for this action" check box and select the new "App widget picker 4.0.3" option.
Then your good to go
I've attached some before and after Screenshots that I tested this on my own MoPho, as I do with all Apk's that I find and post.

I have a "Fix" for the thing popping up in status bar telling you to "select input method" every time you open keyboard. Haven't seen this covered, if it is by all means remove this post though. Not really much of a fix, but it was something that drove me nuts trying to make go away.
Settings - Manage Apps - All - Scroll to bottom and find one with bunch of Japanese characters - Select disable. You should be good to go from there without annoying status bar message everytime you open keyboard.

thatguy07 said:
I still get the notification after disabling this :-/ oh well
Sent from your moms house using her XDA APP
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=23038577
This worked for me.
Sent from my Xoom using Tapatalk

Th3Bill said:
7) Boot animation. I knot this isn't a fix, but who doesn't love to have options for boot animation? Stock ICS is nice, but I find these a little nicer.
a) CM9 Boot animation: Thanks to Akilldema. If this helps you go here Akilldema CM9 Boot Anim Post and thank him.
Here's a 6mb version of the bootanimation.zip CM9 Boot Animation
It's not much better, if any. I think it's related to the phone booting. Also, when I preview the animation, it plays perfectly.
EDIT: NEW FILE: New CM9 Boot Animation
b) RAZR animation: If you like this, go here RAZR Boot Animation Post and thank.
RAZR Boot Animation
These are not the only ones..they're the only ones I've tested. Others may work, but use at your own discretion...Simply copy these into /system/media (be sure to edit the name of your CURRENT bootanimation.zip to bootanimation.zip.bak so that if it does NOT work, you can always go back ) Upon reboot, you will have new animation.
Click to expand...
Click to collapse
Th3bill, you should take down the 6mb version/notes.. the best 2 for us are the 540x960 ones posted here: CM9 Boot Animations. The 60fps is better for me, smoother.

Gapps are prohibited in cyanogenmod roms. If you want to post your work do so as a separate download like an add on.
Sent from my MB855 using XDA

Easy Flashable Zip filled with Themed Apps
First and foremost... I AM NOT TAKING CREDIT FOR THIS ROM OR THE THEMING OF THE APPS. IF YOU FLASH THIS, YOU DO SO TAKING FULL RESPONSIBILITY OF YOUR PHONE BLOWING UP AND OR LOOKING BETTER THAN IT EVER HAS...
I took Jokers latest update 0.3.1 and his gapps v10 and removed and replaced the following apps with ICS Themed apps
Calculator
Calendar
Gmail
Email
MMS
Twitter
Facebook
Pandora
XDA
Drop box
Google Voice
Google +
YouTube
Inverted Market
CM9 Boot animation
Do a full wipe and system format then install ROM followed by gapps...
Remember that this is a complete ROM and gapps and that when joker comes out with an update that you intend to flash, you must do a full wipe and fresh install before flashing AND YOU WILL LOSE THESE THEMED APPS...
Anyone interested in taking this for a spin...
ROM link: http://db.tt/IlUFCJDz
Gapps link: http://db.tt/U40gNzxj
I'm running it right now... Everything is Iced Out and SHWEEEEEET

MobileAllStar said:
First and foremost... I AM NOT TAKING CREDIT FOR THIS ROM OR THE THEMING OF THE APPS. IF YOU FLASH THIS, YOU DO SO TAKING FULL RESPONSIBILITY OF YOUR PHONE BLOWING UP AND OR LOOKING BETTER THAN IT EVER HAS...
I took Jokers latest update 0.3.1 and his gapps v10 and removed and replaced the following apps with ICS Themed apps
Calculator
Calendar
Gmail
Email
MMS
Twitter
Facebook
Pandora
XDA
Drop box
Google Voice
Google +
YouTube
Inverted Market
CM9 Boot animation
Do a full wipe and system format then install ROM followed by gapps...
Remember that this is a complete ROM and gapps and that when joker comes out with an update that you intend to flash, you must do a full wipe and fresh install before flashing AND YOU WILL LOSE THESE THEMED APPS...
Anyone interested in taking this for a spin... PM me
I'm running it right now... Everything is Iced Out and SHWEEEEEET
Click to expand...
Click to collapse
If you need help making an add on just mod one of my gapp zips
Sent from my MB855 using XDA

MobileAllStar said:
Would modding just the gapps be able to overwrite and replace system apps such as email, calendar, calc etc.?
Click to expand...
Click to collapse
It ought to, especially if users first wipe their cache.
a) Include the new files in the appropriate folders within the zip
b) Execute corresponding "rm" commands in the update-script to blow away the existing files
c) After those rm commands, execute the copy_dir command(s)
d) Execute the set_perm_recursive command(s)
It really ought to work.

Related

[ROM] [AOSP] PureFroyo v1.1 Beta (Pure, clean and fast ROM) (2010-08-26)

*************************
PureFroyo v1.1 Beta AOSP
*************************
Introduction
==================================================
- PureFroyo is an Android 2.2 Froyo FRF91 ROM built from AOSP (last repo sync: 2010-08-18)
- Pure, clean and fast without using any compiled MODs from others
- Self MODs of trackball wake; battery percentage and reboot/recovery options
- Bundle with IntersectRaven UV kernel for great battery life
- For Nexus One Only
Features
==================================================
- Android 2.2 Froyo FRF91 ROM built from AOSP (self compiled)
- Rooted with su + Superuser 2.3.4 (thanks ChainsDD) + Deodexed
- Busy box and Toolbox (sym link)
- Trackball wake only (self MOD)
- Reboot / Recovery menu when pressing power button
- Battery percentage (shows "F" when 100% full battery) (thanks CyanogenMod)
- Latest google apps (gapps-hdpi-20100817)
- Lock & Unlock sound
- Default black theme status bar with white text (thanks Geo411m)
- More notification sounds
- Froyo default a2sd
- Froyo default boot animation (that means no special boot animation)
- Kernel: IntersectRaven's 2.6.35_AVS-925mV_CFS_20100802_1056
- Wifi / Wifi portable hotspot / Camera all working
Something removed / not included
==================================================
- Camera click sound
- Amazon MP3
- CarHome related
- Twitter
- Voice Search
- ChromeToPhone
- Google Voice
- Google Talk
- A2SDEXT (not tested)
Instructions
==================================================
Install this ROM through recovery:
1. Nandroid backup first!
2. WIPE cache + dalvik-cache
3. Flash PureFroyo from SD
4. Reboot
Notes
==================================================
1. You MUST be using the Froyo radio, see the first post.
2. You MUST make a nandroid backup, I will not be held accountable.
3. Wipe cache and dalvik-cache, no need to wipe data in most cases
4. Remember that if you use this ROM, you do so entirely at your own risk
Special thanks to
==================================================
Paul , Pershoot , Cyanogen , Leo , Geo411m , IntersectR , Wildmonks , coolbho3000 , paratox , vnbuddy2002 , djmcnz , evild , MicroMod777 , JupIterdroid , 928Droid , crimsondr , Eliotstocker, Google search engine, github, updater-scripts from all ROM gurus for reference, all kernel gurus, and others that I cannot remember the name...
The purpose of this ROM is to share a completely AOSP built ROM that used by me daily. I may/may not continue to update this ROM but is welcome for opinions and pinpoint of any errors or in which line of code that I can improve. Some of the features such as trackball unlock, hangup, alert are not implemented because I am not using these features, thanks for accepting these.
I am trying different kernels everyday and let's try out which one is best to you. Of course, this ROM is compatible with most of the kernels including stock / pershoot / wildmonk's etc...
Thanks all for accepting a junior member here posting with poor English and wish all of you enjoy this ROM.
Let's try out the ROM here:
Main site: >> http://www.mediafire.com/PureFroyo <<
Change in 1.1 Beta:
- Fix Setup Wizard bug
- More complete build.prop
- More complete apns-conf.xml APN list
- Revised hosts file
- Default kernel changed to Wildmonk's 2.6.35_SVS-950mV_CFS_AXI_NoAB_No720p_1113MHz_081910
- Replacement of stock icons for: Browser, Calculator, Clock, Calendar and Messaging.
- Misc. bug fix
PureFroyo 1.1 Beta (2010-08-26)
MD5 Sum: 1e152d42a31d15fae2ba3c2b92e3a34c
Mirror: PureFroyo1.1Beta_signed_082610_201156_rel_.zip - 63.51MB
PureFroyo 1.0 Beta - 1st beta (2010-08-24)
MD5 Sum: 0da6748c75365adb886cfb1141c34a19
Mirror: PureFroyo1.0Beta_signed_082410_233410.zip - 63.39MB
Screenshots (2nd screen's icons are not included in the ROM )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New icons for 1.1 beta
Always nice to see new people building from source! Good job!
Sounds good. BTW, thanks for the mention
Mmmmhh.. No Flash Player in the market :/
Trackball alert support please
Ok, I tried out your rom. Multiple attempts to install.
I get - first off a choice of if I want to use the wizard or not, and that seems wrong.
Then I use the wizard once, it crashes to the beginning, I use it again and it FC's.
After that I cannot get on my network, I do a network search, find ATT and select it but never connect.
I have tried every way I can think of to make it connect to ATT but it will not.
Thanks for the attempt at the ROM, but I had to uninstall it.
snlu178 said:
Ok, I tried out your rom. Multiple attempts to install.
I get - first off a choice of if I want to use the wizard or not, and that seems wrong.
Then I use the wizard once, it crashes to the beginning, I use it again and it FC's.
After that I cannot get on my network, I do a network search, find ATT and select it but never connect.
I have tried every way I can think of to make it connect to ATT but it will not.
Thanks for the attempt at the ROM, but I had to uninstall it.
Click to expand...
Click to collapse
Well, I have tried myself to wipe data (all) when installing the ROM and it is OK.
But most of the case, you do not need to wipe data. Just wipe cache + dalvik-cache, you should not be seeing the wizard.
BTW, can you PM me the logcat and which radio version you are using? Thanks.
**Update: I have just wipe data + cache + dalvik-cache and re-install the ROM -> can go through the wizard without any FC. For network problem, is that you do not type in a correct APN?
great rom thanks
we need more roms like this one, thanx and hope you keep up the work....
Where did you get icons from second pic?
noonerealy said:
we need more roms like this one, thanx and hope you keep up the work....
Where did you get icons from second pic?
Click to expand...
Click to collapse
thanks, icons are come from crystal project, more icons are still under modifications
Sent from my Nexus One using XDA App
I will release version 1.1 Beta within few hours later.
It would include:
- A more complete build.prop
- A more complete apns-conf.xml APN list
- A revised hosts file
- Default kernel changed to Wildmonk's 2.6.35_SVS-950mV_CFS_AXI_NoAB_No720p_1113MHz_081910.zip
I am thinking of whether to include a few ICON replacements for the stock browser, calculator, calendar, clock and messaging. Icons are from crystal project in which they are under GNU public license.
Any ideas?
uhm....self MOD br0!....srsly...srsly?!!!one!one!11!1one!?//?/?slash?.....*sigh*.....
ardatdat said:
Well, I have tried myself to wipe data (all) when installing the ROM and it is OK.
But most of the case, you do not need to wipe data. Just wipe cache + dalvik-cache, you should not be seeing the wizard.
BTW, can you PM me the logcat and which radio version you are using? Thanks.
**Update: I have just wipe data + cache + dalvik-cache and re-install the ROM -> can go through the wizard without any FC. For network problem, is that you do not type in a correct APN?
Click to expand...
Click to collapse
Apologies I did not log in till just now. I have installed InnovationOS so I don't have my log cat. However if you find it critical I can go through the install again and get it for you.
As far as APN. I have to admit not editing it. I did search for the network, it found ATT and I told it to select it. It would register but never get edge or 3G.
I do commend you. It's a great build idea. Check out Liquid Froyo on the droid. They are making slim lean and mean droid builds. I would love for that on my N1
Let me know if you want that log cat. It may take a day.
snlu178 said:
Apologies I did not log in till just now. I have installed InnovationOS so I don't have my log cat. However if you find it critical I can go through the install again and get it for you.
As far as APN. I have to admit not editing it. I did search for the network, it found ATT and I told it to select it. It would register but never get edge or 3G.
I do commend you. It's a great build idea. Check out Liquid Froyo on the droid. They are making slim lean and mean droid builds. I would love for that on my N1
Let me know if you want that log cat. It may take a day.
Click to expand...
Click to collapse
No worry, I am improving the APN list so that you will find a more complete APN list in the next build. Thanks for your support.
The new 1.1 Beta is released!
Please try it out! Especially those who have experienced setup wizard bug, this version should have fixed it
hi ............
your screen shut doesnt show up in my browser .........
please attached theme in the site
B.E.H.N.A.M said:
hi ............
your screen shut doesnt show up in my browser .........
please attached theme in the site
Click to expand...
Click to collapse
OK, attached.
a little tip:
When building, you can use:
Code:
TARGET_NO_RADIOIMAGE=true make otapackage
It will automatically create an update zip with updater-script and sign it for you. Saves a TON of time
great rom
thanks , great rom.keep it up.
Hi could you add Gtalk and trackball colors? that would make it great!
THanks..

[Rom]{7.13.11}[EC09] ComRom GB 0.2.1 (ugb) *0.2.1 patch released

***Warning: EC09 is notorious for either wiping/corrupting/destroying sdcards...in testing comrom was doing this to some folks as well..use a backup card, or just deal with the risk...dont cry to us about ur borked card!****
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Presents
Ultimate Gingerbang 0.2.1
A Community Rom​
TeamSbrissenMod.net​
***Welcome to Ultimate Gingerbang 0.1! This is an extension of the original froyo thread here and here.
*The op consists of several posts, in my attempt to better manage the rom going forward.
*So what is Com Rom/UGB then? Basically it was the next stage in adrynalyne's superclean roms which have been going since dl09 (and since dio1 through jt1134). Its a stripped down version of touchwiz (in this case EC09 gingerbread) with enhancements/mods/themes...basically more functionality.
Highlights: (as of 0.2.1)
*includes tsm parts: see sbrissen's thread for specific mods added
*gingerbread themed (frameworks, sys ui, settings, dialer, phone, music, browser, contacts, camera..more to come)
*deodexed
*rooted with super user
*busybox
*tweaked minifree settings
*advanced power options
*working ec09 browser downloads
*new market
*ads blocked by host file
*6th toggle added to status bar pulldown power controls (vibrate/sound)
*clean text on toggles (auto rotation to rotation, mobile data to data)
*launcher2
*appwidgetpicker (boombuler)
*pacman apk from cm included, on first market usage post wipe it will give you the option to select a few common apps rather than search the market for them
*latest gapps (including google +, and google car home instead of tw version)
*overscroll glow
*aosp weather/news, deskclock
*microbes lwp, and nexus lwp
*8 tab browser (i9000, from nameless)
*egl fix from nexus s (should fix blurry icons)
*market fingerprint for nexus s to fix apps not showing in market
*lots of tw/vzw removed (launcher, widgets, vzw apps, etc)
*crt screen off (must not turn animations all off in spare parts)
*system ui transparency enabled
*rfs kernel (optional): stable adb (wont show debugging/storage on boot with cord plugged in, but adb works), boot animation support
Credits:
sbrissen
adrynalyne
omj
andmer
bendbowden
navenendrob (is doing great work with ec09 and 2.3.3)
nitsuj17
cm for some aosp apps
boombuler for appwidgetpicker
nitr8 for nitrality apk (where download fix comes from)
egorzilla
Major Thanks To:
jt1134
chopperthedog
times_infinity (squash)
thatdudebutch
thefunkbot
dtatchd
nemesis2all
imnuts
dmitt25 for the tsm picture
dalev
all the testers
everyone in #teamsbrissenmod
***SDCARD Stuff***
(This is only my opinion and may or may not help those with issues)
-i recommend properly mounting and unmounting your sdcard with each use...meaning dont just yank out the usb cord or reboot (recovery or otherwise) with the card mounted as a usb devices. Doesn't hurt anything to do this and *might* help keep your card intact.
-if you card gets borked (you see the blank sdcard/format message in android), first try and format in cwr, rather than in android or on your computer...fixed my card up, ymmv
FAQ
(will be updated as questions/issues arise as well)
Q: Who/What is TSM/TeamSbrissenMod
A: Short version: a few of from xda/irc who work on projects together and generally just hang out in irc a lot
A: Longer version: we started it as a joke (see the early @teamsbrissenmod tweets for an idea), but then bendbowden started making vanilla aosp mods and releasing under the TSM banner. In the lull between ec10 for the mez and EC01/ED01 Adrynalyne asked if a few of us wanted to team up for the next version of whatever rom he did post-superclean and TSM went from there. Its named after sbrissen, because hes ridiculously smart and talented...and deserves all the kudos you can give him.
Q: I'm on RCxx from testing...should I bother upgrading to 0.1? I don't want to wipe again!
A: I would, tsm parts has been updated and several apks changed.
Q: Why is there no voodoo?
A: since there is no source for ec09, voodoo has to be hacked into the stock kernel...its not an easy process and has yet to be done, but navenendrob is working on it.
Q: I don't like how you themed (insert app) or why did you use (insert app) instead of (insert app)!!!!!! WHY DID YOU DO THIS?!?!?!
A: Frankly you can't please everyone. Many of the theming decisions or using aosp apps instead of samsung or vice versa just came down to what we (or in theme case me) felt worked best with the rom. I doubt more than a handful of people would run the EXACT same setup (down to each individual apk) if they were given the choice. We try and accomodate people through patches as best we can.
Q: I hate ec09!!! Please tell me you will continue to be working on froyo versions!
A: Umm...well sorry ...at this time we are only planning on TW Gingerbread releases going forward...yes eco9 is buggy, but at least imo still good enough to be on (sdcard and usb debugging issues are a pita, i admit)
Q: How can I fix the fc on calendar notifications?
A: Go into calendar--settings--select default ringtone...and pick something other than the default one
Known Issues
*if you boot with usb plugged in, adb works, but debugging/usb storage wont show as available, unplug and replug ur connector
*ec09 eats sdcards
*MIUI lockscreen when plugged in will tend to run your processor at or near maximum mhz. (seems to do this on most phones)..you may choose not to use it when plugged in
*calendar fc on google cal apt ringtone notification (doesnt happen to everyone, see faq for fix)
*manage applications fc in settings
changelog *updated 7.13.11
7.13.11 V0.2.1 (patch)
*changed updater-script to fix gps permissions (credit egorzilla, more on top of things than me )
*replaced old market with new one (currently being pushed out, saves ya the wait)
7.12.11: V0.2 (patch)
*recent call log text (black on black) in dialer,
*some other black on black text
*ads blocked by host file
*browser first load header fix (it was white at first than flashes to grey, samsung added a new image, pita)
*themed email.apk (sorry for leaving it out in 1.0)
*browser downloads fixed (credit nitr8 and his nitrality app for apks and DaleV for the idea)
*crutch.apk added to support more types of file downloads
7.11.11: added patch for email (sorry for leaving it out)
7.10.11: added no kernel version of 0.1
7.9.11: V0.1: initial gb release
*includes tsm parts: see sbrissen's thread for specific mods added
*gingerbread themed (frameworks, sys ui, settings, dialer, phone, market, music, browser, contacts, camera..more to come)
*deodexed
*rooted with super user
*busybox
*tweaked minifree settings
*advanced power options
*6th toggle added to status bar pulldown power controls (vibrate/sound)
*clean text on toggles (auto rotation to rotation, mobile data to data)
*launcher2
*appwidgetpicker (boombuler)
*pacman apk from cm included, on first market usage post wipe it will give you the option to select a few common apps rather than search the market for them
*latest gapps (including google +, and google car home instead of tw version)
*overscroll glow
*aosp weather/news, deskclock
*microbes lwp, and nexus lwp
*8 tab browser (i9000, from nameless)
*egl fix from nexus s (should fix blurry icons)
*market fingerprint for nexus s to fix apps not showing in market
*lots of tw/vzw removed (launcher, widgets, vzw apps, etc)
*crt screen off (must not turn animations all off in spare parts)
*system ui transparency enabled
*rfs kernel (optional): stable adb (wont show debugging/storage on boot with cord plugged in, but adb works), boot animation support
Click to expand...
Click to collapse
Instructions
***again ec09 eats sdcards...use a backup card if you can!!!
Installing Com Rom
Method A (coming from voodoo froyo or eclair)
1. download rom with kernel (or have a gb kernel on sdcard to flash)
2. move to your sdcard
3. boot into cwr and disable voodoo (if using a cwr w/o voodoo controls, must create disable-lagfix file and reboot once before going to cwr)
4. reboot to allow conversion
5. boot back into cwr
6. wipe data/cache/davlik cache (if you dont, expect issues...and also dont bother bug reporting..we wont help you!)
7. select install from sdcard
8. select rom .zip
9. reboot
10. wait 5+ minutes for phone to boot up (it takes awhile)
11. profit (or not if it bootloops)
* odin the ec09 radio if you havent already
Method B (flashing over stock rfs gb leak)
1. download rom w/ kernel
2. move rom to sdcard
3. boot into cwr
4. wipe data/cache/davlik cache (if you dont, expect issues...and also dont bother bug reporting..we wont help you!)
5. select install from sdcard
6. select rom .zip
7. reboot
8. wait 5+ minutes for phone to boot up (it takes awhile)
9. profit (or not if it bootloops)
Method C (flashing over ext4 gb kernel)
1. download rom sans kernel
2. move rom to sdcard
3. boot into cwr
4. wipe data/cache/davlik cache (if you dont, expect issues...and also dont bother bug reporting..we wont help you!)
5. select install from sdcard
6. select rom .zip
7. reboot
8. wait 5+ minutes for phone to boot up (it takes awhile)
9. profit (or not if it bootloops)
* odin the ec09 radio is you haven't already
Also, great article on why wiping anything in cwr (data/cache/davlik) more than once is pointless: http://cvpcs.org/blog/2011-06-05/time_to_wipe_data/cache
(I would go further to say dont flash **** from people who tell you to wipe data 3X Times...but im a jerk)
***ADB!!!!
for those that don't have the Android SDK installed (or know what it is) Adrynalyne made an awesome tutorial <--- check it out!
For Reporting Issues:
(If you Do Not follow these instruction exactly, we will ignore your pleas for help!)
1) post your exact setup (version of com rom, kernel, voltage settings, any other mods you did flash)
2) did you wipe data/cache/davlik cache before flashing the rom
3) what rom/setup did you flash com rom over
4) what is your *specific* problem...not "omgz ma ****z be borked yo"...that helps no one and frankly is annoying to see...
5) ive said this 500 times already, but hey whats once more? POST AN ADB LOGCAT OF YOUR YOUR BOOTLOOP/FORCE CLOSE PROBLEMS/ETC...it aint hard
cd your adb folder
then
Code:
adb logcat > logcat.txt
-this creates a text file in your adb folder in the sdk (tools or platform-tools, w/e) post it in a pastebin and link the pastebin here or post it from dropbox or something
for the less sdk literate folks (and really im tempted to say if you dont have adb, dont flash stuff...but umm...i wont)
you can use terminal emulator on your phone to logcat (obviously not when booting to diagnose bootloops, but can help with force closes)
Code:
logcat > /sdcard/logfile.txt
-this creates a file on your sdcard...copy it to your computer and pastebin/dropbox it
Downloads:
Roms (full roms and patches):
UGB 0.2.1 (includes everything in 0.2, flash over 0.1): http://www.multiupload.com/IWI14XUXM3 *7.13.11
md5: 25F9283254D9E65E9D56FB846BCE46A6
UGB 0.2 (patch, must be flashed over 0.1): http://www.multiupload.com/2NRVF4S9PO *7.12.11
md5: 98F1C2ADA34853BDDE0851B0E6784A3F
UGB 0.1 (rfs): http://www.multiupload.com/YLO3JJNFBE *7.9.11
md5: e26201d983f0a42f219c9013f2aba3e6
UGB 0.1 (no kernel version): http://www.multiupload.com/KYUR8Y0GMK *7.10.11
md5: eff5961d4c48eb8387c40d5547331d0a
(you must use a tw gingerbread kernel with this rom)
Patches:
stock email apk: http://www.multiupload.com/MDN3ADR456
Plans for future releases
(may, may not happen)
*scrollable widgets for launcher2 and homescreen looping
*theme support from tsm parts
*further ec09 fixes
Wtf? You ok?
Edit*
Guess u are. Very cool you guys got this up and running!
Sent from my SCH-I500 using XDA App
Help! I tried flashing it and Im in a bootloop now. What do I do!!!????
Excited!
Sent from my SCH-I500 using XDA App
[/QUOTE]*So what is Com Rom/UGB then? Basically it was the next stage in adrynalyne's superclean roms which have been going since dl09 (and since dio1 through jt1134). Its a stripped down version of touchwiz (in this case EC09 froyo)[/QUOTE]
Hmmmmmm? ECO9 FROYO?
Sent from my SCH-I500 using XDA App
What is this? Comrom 3.0? Is this based off of the gingerbread leak?
Sent from my SCH-I500 using XDA App
dr_w said:
What is this? Comrom 3.0? Is this based off of the gingerbread leak?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
it is based off of ec09, yes
Cool.
Sent from my SCH-I500 using XDA App
dr_w said:
What is this? Comrom 3.0? Is this based off of the gingerbread leak?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Please read the op
Another Fascinating post by my XDA app...
I'd love to try this (running your 2.1 right now) but what's the point if its going to eat my sd card. Have you found a way around this?
Sent from my SCH-I500 using XDA App
skynet11 said:
Please read the op
Another Fascinating post by my XDA app...
Click to expand...
Click to collapse
Yeah I posted before he explained it all. I'm good thanks.
Sent from my SCH-I500 using XDA App
dr_w said:
Yeah I posted before he explained it all. I'm good thanks.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Just noticed from GrainOsand's post that Nitsuj originally said "EC09 Froyo" in the op - my bad
Can't expect even Nitsuj to be typo-free so early on a Saturday morning
Another Fascinating post by my XDA app...
dr_w said:
What is this? Comrom 3.0? Is this based off of the gingerbread leak?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Did you read any of the OP's?
Sent from my SCH-I500 using XDA App
Perfect timing (not!) literally as Im in the middle of flashing over to CM7.
OK - I think we've covered this reading the op issue more than sufficiently...
Another Fascinating post by my XDA app...

[MOD] Flash-aholicsTool 5.4.2012.0 - ICS and NFC Support

This is a windows based tool that I created to add things that I like to existing Gingerbread ROM's and to Hellraise I9100 Gingerbread ROM's (Samsung or CM7/MIUI/CM9 based) and I have decided to share it with you guys. One thing this is great for is flashing the updates of a ROM you use on a regular basis, I got sick of having to keep putting my custom init.d files (mostly that I would forget) and editing the Build.prop on the android was a pain in the butt so this tool helps me and hopefully you guys will find it useful too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How it works:
1. First you select a ROM that you have downloaded using the button to the right of the "Selected ROM" textbox.
2. Select what options you want to do to the ROM (like adding systems apps, init.d files, and custom Build.prop parameters, or Hellraise it!)
3. Click "Build ROM" and the program then unzips the ROM, apply's the user selected options and rebuilds the zip file so it is ready for flashing.
4. Copy the zip file to your phone and flash away!
5. If your phone does not boot try these 3 things before giving up (one of these should get you going)
a. Flash the same zip again
b. Remake the ROM using a different kernel
c. Remake the ROM using a different modem (making sure you selected the modem from the right type)
6. Always remember to wipe cache and Dalvik, and factory reset if you are coming from a different ROM, just like always.
How to Hellraise:
1. First you select a ROM that you have downloaded using the button to the right of the "Selected ROM" textbox.
2. Check the "Hellraise the ROM" check box.
3. Select if it is an ICS ROM.
4. Select a kernel from the dropdown list of kernels (I have included the Kernel from CM7 and MIUI and also included latest Siyah)
5. Select a modem from the dropdown, being careful to select the modem type for the ROM you are Hellraising (You will see 2 lists in the above picture, 1 for Samsung based and one for CM7/MIUI.
6. Click "Build ROM" and the program then unzips the ROM, apply's the user selected options and rebuilds the zip file so it is ready for flashing.
7. Always remember to wipe cache and Dalvik, and factory reset if you are coming from a different ROM, just like always.
8. Copy the zip file to your phone and flash away!
How to remove device specific checks (this is what prevents some of the I9100 ROMS from installing on our phone:
1. Check the "Strip out device specific script calls" box
How to add Init.d files to the ROM:
1. Just click the one you want to add from the "Add Init.d Files" section so you see a check mark next to it, all files will be added to the ROM that have a check mark on them. WARNING: the loopy_smoothness init.d file contains some of my custom lines in it to work with MIUI, so if you are not using MIUI you will need to modify it!!!
2. To add your own Init.d items, navigate to the "Initd" sub directory for this program and copy your custom files to that folder (make sure there is no extention on the file name) and then restart the program and they will show up in the list.
How to add Build.prop items to the ROM:
1. Just click the one you want to add from the "Build.prop Mods" section so you see a check mark next to it, all files will be added to the ROM's build.prop file that have a check mark on them.
2. To add your own Build.prop items, navigate to the "BuildProp" sub directory for this program and copy your custom files to that folder (make sure you add ".build.prop" to the end of the file name) and then restart the program and they will show up in the list.
How to add System/App Files:
1. Just click the one you want to add from the "Add System/App Files" section so you see a check mark next to it, all files will be added to the ROM's System/App directory that have a check mark on them.
2. To add your own System apps, navigate to the "CustomSystemApps" sub directory for this program and copy your system apk's to that folder and then restart the program and they will show up in the list. I primarily use it for QuickOffice and CM7's camera.
How to append to the new zip file:
1. Just type something in the "Append This to New Zip" field. Make sure you don't use wierd characters that windows/phone wont understand.
Applying an MIUI theme:
1. Place your favorite MIUI theme (they are the files with .mtz extension in the "MIUI/Theme" directory on your internal sdcard) in the "MIUIThemes" subdirectory of my program to ge them to show in the list.
2. Select the one you want to apply to the ROM from the "MIUI Themes" selection dropdown and it will then be automatically applied to the ROM, its that easy!
Text Editor:
I have also included a text editor to edit scripts and Build.prop modifications so you can modify them anyway you want. Simply select a file from the list and then click the "Edit File" button to the right of the list (there is one for init.d files and one for Build.prop Mods).
I9100 ROM's Confirmed working:
1. Criskello
2. Turkbey
3. MIUI.US
4. WIUI (see post #76 for special instructions)
5. HydrOxyG3NMOD V2
6. miui special edition V6
7. Omega 10.4
8. AdyScorpiusMIUI vGB1
9. Checkrom v4
10. Checkrom v6
11. MiuiDano
12. miuiandroid.com SGS2 ROM's
Great thanks for the donation from the following:
1. stevehkim
2. stoney_38668
Special thanks to:
shep211 for paving the way to the MIUI I9100 conversions and anyone else involved.
Entropy512 for his Hellraiser and kernel.
Fenny for his ICS kernel!!!!!!!
To all the guys from the forums in providing the scripts/build.prop edits I have included in this package.
The CM7 and MIUI teams.
GOKHANMORAL for Siyah kernel.
Download Instructions:
1. Donwload Zip file from below.
2. Extract contents to a Folder on your harddrive (preferably something like "C:\ROMMaker", keep it out of special folders like "My Documents" so you don't run into permission issues).
3. Right click on "Flash-aholicsTool.exe" and select "Run as Administrator".
Download Link for 5.4.2012.0: http://www.mediafire.com/?mnjidmm2kss21s6
Download Link for 3.22.2012.0: http://www.mediafire.com/?1v1xxbugm1w5na2
Download Link for 3.3.2012.0: (thanks to efan0388 for server space) http://myandroidroms.com/files/pjkvNnn1330834792.html
Download Link for 2.23.2012.0: http://www.mediafire.com/?it3uzlne50xdzu0
Download Link for 2.17.2012.0: http://www.mediafire.com/?9v21g945khik2i3
Download Link for 2.16.2012.1: http://www.mediafire.com/?u1lv8g5bk8cy3oa
Download Link for 2.15.2012: http://www.mediafire.com/?76f8b5vb4rgwixk
Download Link for 2.9.2012: http://www.mediafire.com/?7jajc2ejk73boxd
Click "Thanks" if you like what you see or donate with my link.
Change Log:
5.4.2012.0
1. Added NFC support to options
2. Added a few new kernels and modems
3. Added option to import kernels and modems so you can update the list anytime you want (just click the appropriate import button, select a zip file with a modem or kernel in it, give it a name and BAM, you added it!
3.22.2012.0
1. Added ICS kernel from Fenny (works with most Sammy/AOKP/CM9)
2. Added on screen button enable/disable function (not that we need it know but I already added it)
3.3.2012.0
1. Added ICS kernels from Entropy and Myself to the package.
2.23.2012.0
1. Changed zip algorithm to try and help those stuborn ROM again (status 7 should be gone now). I verified that CheckROM v6 and miuiandroid.com ROM are now working.
2. Speed up zip/unzip process
3. The hang on building the zip file should be gone now too.
4. Added 2nd version of 3G tweeks for build.prop (got from this thread http://forum.xda-developers.com/showthread.php?t=1510532)
5. ICS ROM's seem to be working now too for the purpose of removing the device specific checks to get them to install.
2.17.2012.0
1. Added text editor for any file (on top menu under "File")
2. Changed "Build ROM" button to "Execute" and gives you 4 options (to give you guys alot of flexibility).
Full build from zip (same thing as the old "Build ROM" button)
Build zip file from "Build" directory
Extract ROM and apply options ONLY
Extract ROM ONLY
3. Changed the way kernel and modems are changed, seems to help some of the stuborn ROM's like MiuiDano.
2.16.2012.0
1. Added wifi fix in nvram_net.txt for those ROM's that need it.
2. Added checkbox to change device name to I777 for people that don't like seeing the I9100 and for market issues.
3. Change multi-threading routine to speed things up and hopefully fix the problem with the zip creation stalling.
4. Added 3 options for hellraising: GB-CM7/MIUI based (slimmed down hellraise), GB-Samsung Based (full hellraise), and ICS CM7/MIUI.
5. Create init.d directory automatically if you select any init.d files and it doesn't exist in the ROM.
6. Before unzipping this version if you plan to replace older version, delete all the directories beginning with "Replacements" then unzip and replace all files and folders.
2.15.2012
1. Added check mark for removal of device specific checks
2. Fixed init.d file copy errors.
3. Added ICS support, only tested AdyScorpiusMIUI v4 and stopped there cus I liked it. Just a few warnings, you will get no sound if you make a call and the USB stuff seems to be messed up so you won't be able to transfer files using USB once the ROM is on there and the hard button issue of course. Other than that, everything else is working including the face-unlock, ENJOY!
4. To get AdyScorpiusMIUI v4 to work, check the Hellraise button, check "This is an ICS ROM", pick the ICS kernel, and check the "Strip out device...". Thats it.
5. Always make a backup before flashing!!!
2.9.2012
1. Added applying your favorite MIUI theme (of course only use this option if you are working on an MIUI theme)
2. Tried to speed up the zipping portion a bit too
Quick list of ROM's put together thanks to this tool:
[ROM] Foxhound 3.0
[ROM] AdyScorpiusMIUI
[ROM] MIUI.us 2.2.17 | WIUI
[ROM] Turkbey V33
[ROM] CriskeloRom V38
[ROM] HydrOxyG3NMODV4
[ROM] HYDRAOSP
cant wait to try it out!
Interesting will give this a try in a few moments if it stays dead at work.
Edit - No link
*waiting patiently*
Confirmed working Turkbey Rom v32!
Cool idea. I'll definitely give this a try when its up.
seems awesome!!
I will be watching this with great anticipation.
Blackberry devs had something very similar to this, and it was awesome.
I cant wait to try it
Sent from my GT-I9100 using Tapatalk
Link is now here. Any body willing to test?
Sent from my GT-I9100 using Tapatalk
I think I did this right, but its been stuck at 99% for a long time I tried twice already.
MysticKing32 said:
Link is now here. Any body willing to test?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I am if I get it working.
got an error at the end of hellraising galnets miui and the miui.us rom for the i9100.
don't know what it means but i did back up my rom. gonna continue flashing this anyway lol
LiLChris06 said:
I think I did this right, but its been stuck at 99% for a long time I tried twice already.
I am if I get it working.
Click to expand...
Click to collapse
What operating system are you on? That ROM was the first one I made this program for.
ktoonsez said:
What operating system are you on? That ROM was the first one I made this program for.
Click to expand...
Click to collapse
Windows 7, should I run it in compatibility mode?
LiLChris06 said:
Windows 7, should I run it in compatibility mode?
Click to expand...
Click to collapse
No, that is what I am on too. Let me try v32 again. One more question, did you get a zip file in the "NewROM" sub folder of the program?
this did not hellraise miui.us
home button does nothing.
search button does nothing.
ktoonsez said:
No, that is what I am on too. Let me try v32 again. One more question, did you get a zip file in the "NewROM" sub folder of the program?
Click to expand...
Click to collapse
Nope just a temp file, tried with a new modem and still stuck.
How long is it suppose to take?
I re-downloaded both the tool and rom and still nothing.
LiLChris06 said:
Nope just a temp file, tried with a new modem and still stuck.
How long is it suppose to take?
I re-downloaded both the tool and rom and still nothing.
Click to expand...
Click to collapse
It takes 34 seconds total on my 64 bit machine, about 2 minutes on my slower 32 bit laptop. I will recompile it a different way and re-upload it for you to try, I will reply to this again when the new version is up? In the mean time, try compatibility mode and also try another ROM for the fun of it.
ktoonsez said:
It takes 34 seconds total on my 64 bit machine, about 2 minutes on my slower 32 bit laptop. I will recompile it a different way and re-upload it for you to try, I will reply to this again when the new version is up? In the mean time, try compatibility mode and also try another ROM for the fun of it.
Click to expand...
Click to collapse
New link is up Chris, re-download and zip over top of the old files. Did you unzip the files to a directory or did you you do it to the root of c drive? Also, is this a Mac or a real computer?
ktoonsez said:
It takes 34 seconds total on my 64 bit machine, about 2 minutes on my slower 32 bit laptop. I will recompile it a different way and re-upload it for you to try, I will reply to this again when the new version is up? In the mean time, try compatibility mode and also try another ROM for the fun of it.
Click to expand...
Click to collapse
Don't bother redoing it! it works! It just worked for me with WIUI rebuilt it in 42 seconds! Nice! running windows 7 64 bit by the way. Now I'm gonna flash it!! Thanks Ktoonsez!
ktoonsez said:
It takes 34 seconds total on my 64 bit machine, about 2 minutes on my slower 32 bit laptop. I will recompile it a different way and re-upload it for you to try, I will reply to this again when the new version is up? In the mean time, try compatibility mode and also try another ROM for the fun of it.
Click to expand...
Click to collapse
Gutterball said:
Don'tbother redoing it! it works! It just worked for me with WIUI rebuilt it in 42 seconds! Nice running windows 7 64 bit. Now I'm gonna flash it!! Thanks Ktoonsez!
Click to expand...
Click to collapse
Thanks Gutterball, enjoy.

[ROM] Stock 1.4.0 & 1.4.2 + Root + Mods - GO Launcher [Yes/No B&N|Rebloat Pack]

[ROM] Stock 1.4.0 & 1.4.2 + Root + Mods - GO Launcher [Yes/No B&N|Rebloat Pack]
Alright today i bring to you a faster way to have a fully functional stock ROM with all the addons and eye candy look I have added a FULL version containing all B&N stock apps minus Keyboard and Mymedia (because those aren't good) so you can pick the one that best suits you.
PLEASE FOLLOW INSTRUCTIONS TO THE LETTER​
What does this ROM provide?
* Root - Thanks Indirect
* Busybox already installed
* Ribbon Status Bar MDPI Mod
* Build.prop changed to look like a Nexus S Mod
* Working cifs, nls_utf8, slow-work, and tun modules - Thanks succulent
* Adhoc wifi FIX - Thanks zambien
* OpenVPN binaries
* Removed some B&N apps including Stock Home Launcher just kept Library, Reader, Games, Pandora and Netflix
* Changed Stock Hulu+ app with a modified one meant to work in most Android devices - Thanks blunttedsmurf
* Comfortaa Fonts
What applications include?
* Some apps have a Ribbon Notification Icon in order to match the Statusbar mod.
1. Superuser
2. ES File Explorer
3. NT Hidden Settings - thanks brianf21
4. Go Launcher
5. AdFree
6. Gapps including Gmail, Youtube and Google Voice (apart)
7. Button Savior
8. Modified Hulu+
9. Modified Email with working Exchange
10. Titanium Backup
11. IMO chat
12. Go Locker
13. Plume (Twitter)
14. TaskXP
15. MusicMod
16. Quick Boot
17. Gallery 3D
18. Wifi ADB
19. Antivirus Free
20. Phantom Music Control
21. SD-Booster
22. FlashPlayer
23. SpareParts
24. Root App Remover
25. Mclock
Installation:
1. Download the file: NT_stock_1.4.0_Ribbon_Root_v2.zip
2. Plug your Nook Tablet to your PC and check that Internal SDcard (MyNOOK) AND SDcard are mounted
3. Copy NT_stock_1.4.0_Ribbon_Root_v2.zip in the root (/) of Internal OR External SDcard (Pick one)
4. Eject safely your Nook Tablet
5. Boot into CWM
5.1 Wipe data then go to advanced>> wipe dalvik cache, once done press power button to go back
5.2 Go to Install zip from sdcard >> choose zip from sdcard (if you copied the folder to your External sdcard) >> select NT_stock_1.4.0_Ribbon_Root_v2.zip
5.2 Go to Install zip from sdcard >> choose zip from internal sdcard (if you copied the folder to your Internal sdcard [MyNOOK]) >> select NT_stock_1.4.0_Ribbon_Root_v2.zip
7. The process will start, once done Reboot your device ENJOY!
Recommendation:
* Backup your apps and data using Titanium for easy restore back
* Wipe data, dalvik cache before flash a new ROM - WARNING: it is safe to wipe/format data, cache, dalvik cache and system, DO NOT format the other partitions or you will brick your device
* Bypass registration of Nook Tablet by Albert Wertz
Download Links:
*These are flashable .zip
NT_stock_1.4.2_Ribbon_Root_B&N.zip - ROM with B&N content (318 MB) | md5: 0eb7a1dff67c5fe58be4c58b13f9abb2
NT_stock_1.4.0_Ribbon_Root_B&N_v2 .zip - ROM with B&N content (300.8 MB) | md5: 1c7033fb9c6467c98c5a50cc167fee5e
NT_stock_1.4.0_Ribbon_Root_v2 .zip - ROM with NO B&N content (284.6 MB) | md5: 9b909ce9d30feedbbde53ae367c861d5
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My Setup:
mClock widget with markedclOck theme (must create mClock folder: /mnt/sdcard/mClock/ and then drop the unzipped files)
PinsMusicMod widget (4x3)
Phantom Music Control (There is a bug and the options doesn't show up but here is my setup)
And lastly for the statusbar: [ICONS] Beautiful -= Ribbon Status Bar Icons =- [MDPI/HDPI]
~ Veronica​
Thanks for this, Veronica. I'll give it a try shortly
_______sig starts here______
Even you were a beginner once
If this post helped click the thanks button!
remember QTIP - Quit Taking It Personal
Works just like it should.
"hack" by Barnes and Noble is a nice touch.
Real nice. I like the ribbons
Sent from my HTC Glacier using xda premium
Cool, gonna try it today! Could you add Morelocale also?
KOCTA said:
Cool, gonna try it today! Could you add Morelocale also?
Click to expand...
Click to collapse
Hmm will think about it, next version will have the copy paste mod. Keep dropping suggestions people.
~ Veronica
Sent from XDA premium using my Nook Tablet
Sounds good. Can I apply this if I have the perm root 9.9.9? Also, what is meant by flashable/not flashable? Thanks, your screens always look great.
hookedonnook said:
Sounds good. Can I apply this if I have the perm root 9.9.9? Also, what is meant by flashable/not flashable? Thanks, your screens always look great.
Click to expand...
Click to collapse
If you want to change to this modified version then boot into CWM wipe data and advanced> dalvik cache, restore this ROM and reboot. Do not perform a hard factory reset if you have CWM or you will fall into a bootloop. Flashable zip is a package created with a different technique (RUU) and can be used for flash not only ROM's but apps, mods and a CWM backup is when you make a backup of your entire system including data, cache, boot, etc images and is just used for ROM's.
Also another pro of a flashable zip is that you get more flexibility with the package, you could modify its content to your taste adding/removing apps, files so from a custom ROM you can make your own custom one.
~ Veronica
Please also add anycut to easy instal an additional keyboard.
With NT Hidden Settings, there's the option of "Accessibility Settings", there you can choose which keyboard to use at "Input Method"
I'm running Swype with no problem
Update 15/2/12
Alright UPLOADING v2, will be a flashable zip now no more CWM backup folder and a standar Apk_Package_Installer.zip with:
* Androzip
* Anycut
* App cache cleaner
* Dolphin Browser
* ES Bookmark Manager (to create shortcuts of your media on desktop)
... These apps are included in the v2 of this ROM.
As i have mentioned in this thread with a flashable zip you get more flexibility.
What does that mean? It means that you can delete apps that you don't want or add others by drag and dropping it/them within /system/app of the .zip
Edit: OP UPDATED!
~ Veronica
lavero.burgos said:
Alright UPLOADING v2, will be a flashable zip now no more CWM backup folder and a standar Apk_Package_Installer.zip with:
* Androzip
* Anycut
* App cache cleaner
* Dolphin Browser
* ES Bookmark Manager (to create shortcuts of your media on desktop)
... These apps are included in the v2 of this ROM.
As i have mentioned in this thread with a flashable zip you get more flexibility.
What does that mean? It means that you can delete apps that you don't want or add others by drag and dropping it/them within /system/app of the .zip
Edit: OP UPDATED!
~ Veronica
Click to expand...
Click to collapse
Sent from my Nexus S using xda premiu
It works for me! Thanks again
claudiaa said:
Sent from my Nexus S using xda premiu
It works for me! Thanks again
Click to expand...
Click to collapse
there is a thanks button, do not spam. or you will be warned by the moderators
(this is spam) so remove when understood
edit: are the steps the same if you update from v1?
424aca said:
edit: are the steps the same if you update from v1?
Click to expand...
Click to collapse
Steps are similar but not the same, i have updated the installation steps so users install it right.
~ Veronica
I added a download link to a B&N_rebloat_FULL_1.4.0.zip i just made if anyone is interested. As the title of the flashable zip say it will rebloat your Nook with all B&N apps.
I placed the modified version of Hulu+ instead of the original one, that is the only "change".
~ Veronica
Problem:
ES file explorer wont take root control.
How do you fix this?
and do we have all memory space on the nook?
edit:
where can you get the market?
do you have to flash that gapps zip by indirect(i think he made one)
424aca said:
Problem:
ES file explorer wont take root control.
How do you fix this?
and do we have all memory space on the nook?
edit:
where can you get the market?
do you have to flash that gapps zip by indirect(i think he made one)
Click to expand...
Click to collapse
do you get an error if so what was it, did you select Allow when su request pop up?
Edit: gapps are already included and for get more memory space you have to reformat your nook there is a guide for that.
lavero.burgos said:
do you get an error if so what was it, did you select Allow when su request pop up?
Edit: gapps are already included and for get more memory space you have to reformat your nook there is a guide for that.
Click to expand...
Click to collapse
the market is not there
as for ES
error is
Sorry test failed. Feature cannot run on your phone.
(after it says superuser has let it root access)
(i also flashed the debloat zip, before so if i dont flash that,
will the other gapps stuff be there)
424aca said:
the market is not there
as for ES
error is
Sorry test failed. Feature cannot run on your phone.
(after it says superuser has let it root access)
Click to expand...
Click to collapse
Look again or reflash please i added all gapps (tested), uninstall ES File Eplorer with the Root App Remover i added , reboot your device and install it again from Android Market (there is a new version anyway) that will fix it.
EDIT: REFLASH AGAIN THE ROM AND DO NOT FLASH THE REBLOAT .ZIP I RECHECKED THE UPDATER-SCRIPT THAT I HAD "MODIFIED" BUT IT DID NOT SO DO NOT FLASH THAT UNTIL I FIX IT
EDIT2: FIXED, LINK UP AGAIN
~ Veronica
lavero.burgos said:
Look again or reflash please i added all gapps (tested), uninstall ES File Eplorer with the Root App Remover i added , reboot your device and install it again from Android Market (there is a new version anyway) that will fix it.
EDIT: REFLASH AGAIN THE ROM AND DO NOT FLASH THE REBLOAT .ZIP I RECHECKED THE UPDATER-SCRIPT THAT I HAD "MODIFIED" BUT IT DID NOT SO DO NOT FLASH THAT UNTIL I FIX IT
~ Veronica
Click to expand...
Click to collapse
thank you
it is now fixed
so for now, do not debloat.
THANK YOU SO MUCH!!!
(Clicking thanks button, again)

[JB:CM10][24/09/2012] Custom GAPPS Normal/Inverted - Free some space in /system!

WANT TO TRY SOMETHING NEW? HEAD OVER HEREhttp://forum.xda-developers.com/showthread.php?t=1913989​AROMA INSTALLER - Custom gapps for Defy / Defy+ / Bravo​
What is this for?
It's a custom version of the Google Apps designed to install most of the apps on the /data partition and therefore freeing some space up on the /system partition. This is because with the increasing size of roms and gapps there may be no space left as the system partition only holds ~350MB​
How do I install this?
This is a customizable file (thanks to Aroma Installer) in which you can choose which apps to install. There are a some files that need to go into /system but there are others that you can have installed in /data without any problems. Just follow the instructions and you'll be fine.​
Can I install on top of my full size gapps?
In theory it should be possible. What the scripts does is install what you selected and UNINSTALL what you have not selected. Meaning that if you have ie YouTube installed on you don't select it in the script it will get UNINSTALLED. In this case you should run the script twice, one for deleting all the apps and then run it again (no need to reboot) and select the apps to install.​
Want to help with translation?
You can do it here: http://www.getlocalization.com/CustomGoogleApps/. If you have any doubts or prefer to translate directly from the English file let me know.
BETA USERS: Please go to http://www.getlocalization.com/gEx/ to translate the upcoming beta version​
Changelog
FAQ
Credits:
AnTerNoZ's for the custom gapps for Defy
Bexton for the Offline Voice Recognition for Google Now uninstall script
Amarullz for the Aroma Installer
TUN_SD for the inverted gapps
tezet for the Google Ears app
niksy+ for the Serbian translation.
The following apps can be installed into the /data partition:
Gmail
GoogleEars (taken from tezet post, please test outside the US)
Music
Now
TalkBack
YouTube
These can get installed to /system partition
ChromeBookmarksSyncAdapter
CarHome (not included in AnTerNoZ zip)
Gallery
Phonesky
Talk
The base files (always installed in /system)
GmsCore
GoogleBackupTransport
GoogleCalendarSyncAdapter
GoogleContactsSyncAdapter
GoogleFeedback
GoogleLoginService
GooglePartnerSetup
GoogleServicesFramework
GoogleTTS
LatinImeDictionaryPack
MediaUploader
NetworkLocation
OneTimeInitializer
SetupWizard
I've also added Bexton's script to remove unnecesary files related to Offline Voice Recognition for Google Now. This is specially recommended for non-English users. This alone will free up around ~30MB on /system.
Included are also the inverted apps (where available) by TUN_SD. Please note these inverted gapps needs to be installed into the /system partition.
Here's the zip:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://goo.gl/sp3Z6 (v1.3c)
What's next?
More translations (user supported)
PLEASE BEAR IN MIND I'VE BEEN A FATHER RECENTLY AND PROBABLY ABOUT TO LOSE MY JOB SO I WILL UPDATE THIS WHENEVER I HAVE A CHANCE​
changelog:
1.3c (24/09/2012)
- Added Serbian translation thanks to [email protected]
1.3b (22/09/2012)
- Fixed script error on new installations
1.3 (19/09/2012)
- Fixed Google Talk install/uninstall
- Fixed Talkback install
- Moved Google Ears to /system
- Fixed Google Ears lock outside the US (thanks to [email protected])
- Added inverted gapps (thanks to [email protected])
- Added automatic Cache & Dalvik Cache wiping
- Updated strings & small corrections to lang files
1.2b (18/09/2012)
- Cosmetic fixes
- License & changelog properly displaying now
- Fixed a few things in the lang files
- Moved back to /system Car Home, Gallery & Talk (they should work for everybody now)
- Moved Talkback to /data
1.2 (18/09/2012)
- Fixed GoogleEars uninstall
- Fixed Google Talk uninstall
- Reworked install script once again
- Properly named apps in data partition (should properly updated from Play Store)
- Added multilanguage support (English & Spanish so far)
- Added license & changelog
- Added version & size info for (almost) each app
1.1 (16/09/2012)
- Reworked install script (ability to install/uninstall)
- English language included (no hardcoded strings)
- Fixed Google Now Offline removing
1.0 (15/09/2012)
- First release (cheap & dirty)
Faq / tips / notes
FAQ / TIPS / NOTES
You should install the zip file via CWM: Recovery > Install zip from SD Card. Wiping of Cache/Dalvik is automatically handled by the script, you don't need to do anything.
if you're trying to customize an already installed full gaps you should run the script twice. First uninstall everything then run it again and
install what you want. You don't need to reboot, just uncheck "Reboot now" when you finish uninstalling in the 1st step.
Google Ears seems to be locked for people outside the US. The only way I can get it to work is to "unfreeze" it with Titanium Backup but it only last till the next reboot.
I do not plan to integrate non-Google inverted apps (like messages, phone, etc)
If the touch screen doesn't work or works erratically: When you run the installer, press the Home button and a menu should popup, select Calibration Tools using the Vol + / Vol - keys and selecting with Power button (just like recovery). You will be able to recalibrate the screen from there.
Great work, mate! And a nice idea, as well.
Btw, do tell what Phonesky is? Googleears?
And definitely looking forward to future updates with inverted apps and all!
niksy+ said:
Great work, mate! And a nice idea, as well.
Btw, do tell what Phonesky is? Googleears?
And definitely looking forward to future updates with inverted apps and all!
Click to expand...
Click to collapse
Phonesky = Google Play Store
Google Ears = Music recognition widget
Now Google Now is fast.. Thank you
I'm uploading 1.2b to fix a few things with 1.2.
Please note that if you're trying to customize an already installed full gaps you should run the script twice. First uninstall everything then run it again and install what you want. You don't need to reboot, just uncheck "Reboot now" when you finish uninstalling in the 1st step.
Version 1.3 with inverted gapps up and running!
very goog
nice work
veja_bmw_2010 said:
nice work
Click to expand...
Click to collapse
Thanks. Next plan is to add some other Google Apps.
Also, would be nice to get some feedback on Google Ears as it seems to be locked for people outside the US. The only way I can get it to work is to "unfreeze" it with Titanium Backup but it only lasts till the next reboot.
[Noob Q] Hi, how do I do this? Should I install the zip file in Recovery? And, if so, is wiping cache and dalvik necessary? Or should I install Aroma Installer first? I have only 6mb left in my System ROM.
Sent from my MB525 running on CM10 12/09 with Minimal Gapps using xda premium
Really awesome. I just want the messages app in black, and im happy haha :good:
nhb13612 said:
[Noob Q] Hi, how do I do this? Should I install the zip file in Recovery? And, if so, is wiping cache and dalvik necessary? Or should I install Aroma Installer first? I have only 6mb left in my System ROM.
Sent from my MB525 running on CM10 12/09 with Minimal Gapps using xda premium
Click to expand...
Click to collapse
You should install the zip file in Recovery > Install zip from SD Card. Wiping of Cache/Dalvik is automatically handled by the script, you don't need to do anything. Finally Aroma is not something that you install, is used to CREATE an install, so you don't have to worry about it. Just install the zip via Recovery and follow the instructions!
kazumisan said:
Really awesome. I just want the messages app in black, and im happy haha :good:
Click to expand...
Click to collapse
Glad you like it! Messages is not part of gapps but more a rom thing. I don't think I should be including it. Check the OP where I mention the post from TUN_SD to his inverted gapps. You can download that to have the full inverted gapps experience. Also, check the post by justin860 where he created an Aroma installation for that.
Thanks again for your help!
@J_M_V_S --- I've installed v.1.3 over old gapps and I don't know if deleting apps and clearing cache and dalvik always work corectly - after first reboot nothing chanaged I still had system partition full , then I cleared cache and dalvik manualy from recovery rebooted and now occupied space on system was greatly reduced ? Thanks for your work .
sebx_g1 said:
@J_M_V_S --- I've installed v.1.3 over old gapps and I don't know if deleting apps and clearing cache and dalvik always work corectly - after first reboot nothing chanaged I still had system partition full , then I cleared cache and dalvik manualy from recovery rebooted and now occupied space on system was greatly reduced ? Thanks for your work .
Click to expand...
Click to collapse
Thanks for letting me know. Did you install normal gapps or inverted?
J_M_V_S said:
Thanks for letting me know. Did you install normal gapps or inverted?
Click to expand...
Click to collapse
Normal ones .
Bug
I just wanted to let everybody know that I found a bug in v1.3. If you install this on a newly installed ROM the data/app directory will not exist and therefore all apps selected that install on /data will fail. Not much of a problem as you can get them from Play Store but I'm uploading a new version to fix this and I'll update the OP.
sebx_g1 said:
Normal ones .
Click to expand...
Click to collapse
Thanks. I'll check and let you know. Probably I will have to add a delay in the installation script.

Categories

Resources