Related
Finally, Ice Cream Sandwich for Xperia come, and Ray get first
but, the GSM, Wifi and BT doesn't works, and DoomLord make it works (thanks so much guys)....
in there i will try to make a step to install ICS with DoomLord Patch,
Requirements :
1. Xperia Ray with Unlocked Bootloader
Download :
1. ICS from Sony Ericsson : Click to download
2. Patch from DoomLord : Click to download
How to :
1. Extract ICS from Sony Ericsson and DoomLord Patch from download above
2. Make it 1 folder and add ADB in the folder
3. Copy Nasty.zip to your SDcard
4. Open CMD on that folder (right click, oper new command windows here)
5. type this command , One by One :
fastboot flash boot boot.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot flash boot recoveryRay.img
instal nasty.zip (install zip from sdcard, via CWM)
fastboot flash boot boot.img
6. Reboot
7. you got ICS
Preview:
you can get the preview from me right here :
https://www.facebook.com/media/set/?set=a.2288891829365.203349.1461055859&type=1
thanks to DoomLord to make it hapeend
please say thanks if it usefull
what are all working and what r all not working?
Works great but with a benchmark test i only get 1092
Works good. But it has some problems such as:
1)Setup wizard on startup launches itself about 5 -6 times
2) Unable to set up usb connection type. It only works in media transfer mode
3)This firmware has some perfomance problems. Sometimes lags appear on a homescreen,or in application menu
Testing....
is it right to use flash twice the boot.img (fastboot flash boot boot.img)
installed on do como so-03c. Exchange not work. Slow n laggy. But ice cream sandwich is beautiful.
Sent from my ST18i using xda premium
crownless said:
is it right to use flash twice the boot.img (fastboot flash boot boot.img)
Click to expand...
Click to collapse
Yes, it's right, because before you install fix from recovery - you flash boot image with recovery. And after that you flash original boot image of ICS
Nice, thx for all Doomlord!
crownless said:
is it right to use flash twice the boot.img (fastboot flash boot boot.img)
Click to expand...
Click to collapse
it is not right in this case: not need flash main boot.img twice, enough to start `recoveryRay.img' into memory by `fastboot boot recoveryRay.img' (without flash it). And catch recovery by vol- pressing.
works great for alpha version.
Its just that i got exchange services stop working, and its a little lagy.
I haven't spotted any other problems yet.
Hi there.
Wifi does not work, even if I turn off security on the Router. Why not show the signal strength?
Other ... For alpha version working satisfactorily ...
username66 said:
Hi there.
Wifi does not work, even if I turn off security on the Router. Why not show the signal strength?
Other ... For alpha version working satisfactorily ...
Click to expand...
Click to collapse
Yes the same is happening on the arc too. But I think doomlord has fixed that now. Read through his thread in the arc forums.
Regards
Blackwatch
Sent from my Ray or Arc S or Play or X10i or Sensation or Wildfire or Optimus using the power of my outer body experience
Blackwatch89 said:
Yes the same is happening on the arc too. But I think doomlord has fixed that now. Read through his thread in the arc forums.
Regards
Blackwatch
Sent from my Ray or Arc S or Play or X10i or Sensation or Wildfire or Optimus using the power of my outer body experience
Click to expand...
Click to collapse
hi developer!...when are you releasing your rom for us??=(
Sent from my ST18i using Tapatalk
lukewong01 said:
hi developer!...when are you releasing your rom for us??=(
Sent from my ST18i using Tapatalk
Click to expand...
Click to collapse
I'm not a developer. I'm just a Rom builder. Developers are like DooMLoRD or Achotjan or Zidzhu or Azuzu. Me I'm just a normal stock Rom builder and editor but it will be ready soon. I have to do a bit at a time to each Rom. X10, ray, arc s. So I know it's taking a long time but I promise it will be ready soon bro
Sent from my Ray or Arc S or Play or X10i or Sensation or Wildfire or Optimus using the power of my outer body experience
Blackwatch89 said:
I'm not a developer. I'm just a Rom builder. Developers are like DooMLoRD or Achotjan or Zidzhu or Azuzu. Me I'm just a normal stock Rom builder and editor but it will be ready soon. I have to do a bit at a time to each Rom. X10, ray, arc s. So I know it's taking a long time but I promise it will be ready soon bro
Sent from my Ray or Arc S or Play or X10i or Sensation or Wildfire or Optimus using the power of my outer body experience
Click to expand...
Click to collapse
Ok, oh i see ....
Hopefully to see your thread soon bro
crownless said:
is it right to use flash twice the boot.img (fastboot flash boot boot.img)
Click to expand...
Click to collapse
we are not flashing it twice
This command means = in "fastboot" mode "flash" file in "boot" sector and file name is "boot.img"
We can also official kernel , kernel .sin
e.g fastboot flash boot kernel.sin
[EDIT] : sorry i got your question wrong
Downloading.....
no signal strengh, no network provider.
however make and receive calls does work.
But I cant end a made call.
does anyone have a solution?
OK, Installation was successful as instructed..
Test result:-
- GSM & 3G Data Working
- Call & SMS Working
- WiFi Working (Press long on the WiFi to go into setting details)
- Camera Working
- Rotation sensor working
Next to test:-
- Bluetooth
- GPS
User experience wise similar to Gingerbread, no major lagging (need to let the phone settle on initial booting for sometime, about 5 min)
to stop exchange error, using root explorer delete emailgoogle.apk in system/app.
ps: some apk have duplicated, delete one. (ex: browser, borwosergoogle, ...)
Hi everyone
a few days ago i have unlocked the bootloader on my xperia p following the official sony instructions.
After that i downloaded and flashed the sliding xp v5 kernel
Everything worked perfect and i wanted to install a custom rom, and i thought that the vision rom would be perfect.
I installed the vision rom v2 in cwm recovery and everything seemed perfect, i like the rom and everything is good but i have a few problems :-/
First i had the problem that sometimes when the screen locks and turns off,when i press the unlock button the screen wont turn on,i can hear that the phone works when i try to take a ss i hear the soind,but the screen wont turn on until i hard restart the phone :-/
The second problem is that the phone just restarts itself randomly sometimes :-/
And the last thin is that when i go in the dialer to call someone it happebs alot of times that the phone lags a lot there and it happens often that when someobe is calling me or when i call someone that it lags and the phone freezes :-/
Can someone tell me why is this happening,because of the kernel or the rom?
and what should i do to fix it,if possible i would like to keep all the settings which i made because i allready personalized it much....
Thanks to everyone in advance
arnes_king said:
Hi everyone
a few days ago i have unlocked the bootloader on my xperia p following the official sony instructions.
After that i downloaded and flashed the sliding xp v5 kernel
Everything worked perfect and i wanted to install a custom rom, and i thought that the vision rom would be perfect.
I installed the vision rom v2 in cwm recovery and everything seemed perfect, i like the rom and everything is good but i have a few problems :-/
First i had the problem that sometimes when the screen locks and turns off,when i press the unlock button the screen wont turn on,i can hear that the phone works when i try to take a ss i hear the soind,but the screen wont turn on until i hard restart the phone :-/
The second problem is that the phone just restarts itself randomly sometimes :-/
And the last thin is that when i go in the dialer to call someone it happebs alot of times that the phone lags a lot there and it happens often that when someobe is calling me or when i call someone that it lags and the phone freezes :-/
Can someone tell me why is this happening,because of the kernel or the rom?
and what should i do to fix it,if possible i would like to keep all the settings which i made because i allready personalized it much....
Thanks to everyone in advance
Click to expand...
Click to collapse
First that came in my mind is that this kernel and the rom are not for eachother - so try to flash munjeni's kernel and the rom again and try it.
Before that flash stock rom via flash tool to make clean install.
mirost1 said:
First that came in my mind is that this kernel and the rom are not for eachother - so try to flash munjeni's kernel and the rom again and try it.
Before that flash stock rom via flash tool to make clean install.
Click to expand...
Click to collapse
Thanks for your quick reply,right now the internet at my home isn't working so i will have to wait before i try it.
I have never used flashtool before so i want to ask you if anything from my phone will be deleted like apps,contacts or something else?
I have also made a backup using cwm before i installed this rom,would it be ok if i just restore the backup,then flash the new kerbel and after that the vision rom again?
arnes_king said:
Thanks for your quick reply,right now the internet at my home isn't working so i will have to wait before i try it.
I have never used flashtool before so i want to ask you if anything from my phone will be deleted like apps,contacts or something else?
I have also made a backup using cwm before i installed this rom,would it be ok if i just restore the backup,then flash the new kerbel and after that the vision rom again?
Click to expand...
Click to collapse
First of all the flash stock rom you need to put the ftf file in Flashtool/firmwares
Then connect the device in flashmode and flash rom (device switched off and to enter flashmode just do vol- and put usb in).
When flashing official stock rom as much as i know you will lose data, and its better to have clean install.
If you flash munjeni's kernel and the rom you want, and if you restore the back up that will flash the old boot.image too, i mean the old kernel and that is not wanted.
mirost1 said:
First of all the flash stock rom you need to put the ftf file in Flashtool/firmwares
Then connect the device in flashmode and flash rom (device switched off and to enter flashmode just do vol- and put usb in).
When flashing official stock rom as much as i know you will lose data, and its better to have clean install.
If you flash munjeni's kernel and the rom you want, and if you restore the back up that will flash the old boot.image too, i mean the old kernel and that is not wanted.
Click to expand...
Click to collapse
Ok then,thank you again for your help,as soon as my connection is back i will do that and post the results here
As for the kernel, flash tool and stock rom, i can find that all here on xda?
arnes_king said:
Ok then,thank you again for your help,as soon as my connection is back i will do that and post the results here
As for the kernel, flash tool and stock rom, i can find that all here on xda?
Click to expand...
Click to collapse
Yeah buddy, its all in Sola section.
Hello there,
I have decided to ask for help after reading at least 100 threads here and on Android forum. I wanted to get custom ROM, so I've checked all guides - man everything over here, and I still managed to brick my phone! ( yellow triangle and no boot? )
----------
-at first I checked the bootloader, and I managed to unlock it using 2nd option in particular thread - some kind of software SE..+ code
-then downloaded Flashtool - done the drivers, changed firmware in the folder; download. OctanE, Gapps zip to my SD card.
and then I bricked my phone by incorrectly plugging, pressing and all that stuff while in Flashtool.
-so then I got Wotan, followed instruction, and of course I got stuck again.
-so I got LuPuS kernel and successfully flashed it, please do not ask how I have no idea.
Right now i would like to get OctanE, but I get to safe mode only by pressing volume down key.
Can somebody of you guys be so kind and guide me step by step ( I really do not understand what to do, sorry) how to get CWM, how to root it because I've got ROM Manager from Google play and it says the phone's not done.
thanks guys,
Veronika
Dear why you are doing such confusing activity.
Just do one thing if your booloader is unlocked then you just connect your phone to flashtool in fastboot mode and flash suitable custom kernel of your phone, by the way the kernel flashing is 5 seconds process,
And if you have flashed Lupus kernel then use POWER KEY WHEN MOBILE BOOTS UP AND PURPLE LED BLINKS instead of vol key to enter in recovery
Sent from my Xperia Live with Walkman using xda app-developers app
---------- Post added at 06:06 AM ---------- Previous post was at 06:03 AM ----------
Which phone you are using dear
Sent from my Xperia Live with Walkman using xda app-developers app
Hello,
i'm using xperia active st17i, ICS.587,
the problem is that when i flash custom kernel i.e. LuPuS, the phone is still not rooted, this one contains boot.img, and ROM Manager shows incorrect rooting.
belavera said:
Hello,
i'm using xperia active st17i, ICS.587,
the problem is that when i flash custom kernel i.e. LuPuS, the phone is still not rooted, this one contains boot.img, and ROM Manager shows incorrect rooting.
Click to expand...
Click to collapse
are you sure your bootloader unlocked properly?
Try to unlocked wth SE unlocked bootloader by quangnhut123, just 3 clicks Done . . .
Sent from my WT19i
gsOaymo Eighth
Hello,
problem Solved after 10 hours!! of fixing, un-bricking and frustration. Let me explain:
-------
I've had ICS .587 with bootloader unlocked and could not root it by downgrading to .0.62, my phone got bricked everytime. I didn't understand I could just flash pre-rooted one. So I have downloaded, flashed it and it contained CWM aswel.
Then I've flashed custom kernel Vengeance, after that OctanE, but my phone was a bit unstable, so I got LuPuS.
All done, there are too many guides and I got really confused.
Thanks for help
V.
Hi
Always happens when you do a favour for someone......
Anyway, i have an xperia U stuck in a boot loop.
1. Ive unlocked the bootloader (that went all ok)
2. Downloaded a prerooted rom and tried to install through fastboot using command line. I couldnt get that working so i used the flashtool to install the rom that way. I renamed the rom system.img and flashed through flashtool and thats pretty where im at now....
If anyone could chip in that would be great
Thanks to anyone that does
Comfy
http://forum.xda-developers.com/showthread.php?t=2023135
Hi - thanks for that - im there now - i cant seem to get it into fastboot - the green light comes on but then it carries on trying to boot - is it a timing thing - ie how long i leave the down button pressed?? or is it knackered....oh- thanks for the link as well....
drsanket_xperia_u - just to say thanks for the link - if anyone else comes across this thread i got the image reflashed - for whatever reason (and i dont know why) it was the usb cable that was the problem - i tried 3 different cables at home but the one that worked (by chance as i thought it was knackered) was a long, quite thick blackberry usb cable - just thought id say....
No ive got my rom back on there - the initial problem i had was rooting firstly....havent got to the CWM part or the rom part but once rooted i guess thats the same as most other phones.....now im reflashed is the bootloader locked again.....?
Again thanks for the link - i dont think i would have found that without your help.
Thanks for the Help!
The same happened with me as well! While trying to install JB unofficial from PIPI, I unlocked my BL which went out fine but the mistake I did was I did not copy the JB fw on to my SD-card when the phone was working. Flashed PHANTOM kernel and my phone never started up since
Downloading the stock FW ftf file from the links provided right now!
Thanks a lot
whoami_amiu said:
The same happened with me as well! While trying to install JB unofficial from PIPI, I unlocked my BL which went out fine but the mistake I did was I did not copy the JB fw on to my SD-card when the phone was working. Flashed PHANTOM kernel and my phone never started up since
Downloading the stock FW ftf file from the links provided right now!
Thanks a lot
Click to expand...
Click to collapse
Yeahp just follow the steps:
1. Reflash stock FW
2. Save the kernel and Pipi's JB in the phone
3. Reboot into Recovery (if you don't know how to install recovery let me know)
4. Full wipe
5. Install from SD card (first JB, then kernel)
Hope that works for you :good:
DONE!
carlaba2 said:
Yeahp just follow the steps:
1. Reflash stock FW
2. Save the kernel and Pipi's JB in the phone
3. Reboot into Recovery (if you don't know how to install recovery let me know)
4. Full wipe
5. Install from SD card (first JB, then kernel)
Hope that works for you :good:
Click to expand...
Click to collapse
Buddy the Kernel had to be flashed first, because it contains that Recovery option and then I flashed the first copied JB stock!
Anyway, the phone is rocking since and I'm easily playing my current love Dungeon Hunter 4 with a Breeze!! although it closes down after every 10 minutes (approx) of lag-free play :-/
whoami_amiu said:
Buddy the Kernel had to be flashed first, because it contains that Recovery option and then I flashed the first copied JB stock!
Anyway, the phone is rocking since and I'm easily playing my current love Dungeon Hunter 4 with a Breeze!! although it closes down after every 10 minutes (approx) of lag-free play :-/
Click to expand...
Click to collapse
Well that's great. When I said flash kernel after rom I meant PHANTOM zip. Just for future reference, you have to flash boot.img via fastboot first, then go into CWM and follow the steps I posted. I forgot that first step
I think the game thing is because of RAM
Simply Flash the Factory Original Sony Firmware Once Again
Simply Flash the Factory Original Sony Firmware Once Again:
Just Google for "Unbrick Xperia U"
theirs a official Sony mobile thread.
Sorry i am new to the forum and can't post links yet
Trust me this works.
regards,
raisedadead
Agreed!
carlaba2 said:
Well that's great. When I said flash kernel after rom I meant PHANTOM zip. Just for future reference, you have to flash boot.img via fastboot first, then go into CWM and follow the steps I posted. I forgot that first step
I think the game thing is because of RAM
Click to expand...
Click to collapse
Yup.. now trying to download Pipi's V2 JB because he said that will fix the RAM management issue for good! And I hope so as well
Thanks for help anyway!
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
G sound said:
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
Click to expand...
Click to collapse
What version are you from and what do you what to flash it with...are you trying to downgrade your firmware....are you unlocked or locked bootloader...
Sent from my C6833 using Tapatalk
martin132014 said:
What version are you from and what do you what to flash it with...are you trying to downgrade your firmware....are you unlocked or locked bootloader...
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
G sound said:
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
Click to expand...
Click to collapse
How are you trying to get into recovery?
What does the LED do while you boot the ZU?
I would just flash jackie099's kernel and restore the backup from there - I cant see how flashtool would be failing except for a problem on the PC
G sound said:
well i came from 757 IN version and i use doomlords kernel...
i think i stuck in 3.4.0-perf-g6f5bf40 kernel... (wich i dont know what that is... :laugh: ) plus flashtool 0.9.16...
Please help me Master...:angel:
thanks for your responds
regards
Click to expand...
Click to collapse
If its so hard for you, i suggest to flash 757 ftf and begin from scratch...its not so hard to do it all over again...after you get recovery, just restore your backup...
Sent from my C6833 using Tapatalk
blueether said:
How are you trying to get into recovery?
What does the LED do while you boot the ZU?
I would just flash jackie099's kernel and restore the backup from there - I cant see how flashtool would be failing except for a problem on the PC
Click to expand...
Click to collapse
If its so hard for you, i suggest to flash 757 ftf and begin from scratch...its not so hard to do it all over again...after you get recovery, just restore your backup...[/QUOTE]
yes master...
i cant get into recovery, i used to get no problem at all flashing kernels or down/upgrading ftf to it...
but right now i'm stuck with this kernel wich theres no recovery at all, no light no recovery...:crying:
i've tried to reflash kernels many times but failed...
the worse part that i got is that it has no signal at all...:crying:
if i flash it with any new ftf (down/upgrade), the kernel should be replace by the list on ftf package right...
but not mine...
Stucks... (3.4 bla bla)
how could i recover my ZU if i cant flash the kernel...:crying:
thanks for your responds...
yes master...
i cant get into recovery, i used to get no problem at all flashing kernels or down/upgrading ftf to it...
but right now i'm stuck with this kernel wich theres no recovery at all, no light no recovery...:crying:
i've tried to reflash kernels many times but failed...
the worse part that i got is that it has no signal at all...:crying:
if i flash it with any new ftf (down/upgrade), the kernel should be replace by the list on ftf package right...
but not mine...
Stucks... (3.4 bla bla)
how could i recover my ZU if i cant flash the kernel...:crying:
thanks for your responds...
Click to expand...
Click to collapse
.
Well use flashtool to flash a kernel like jackie009 or any other that works for you.....
mathurmatt said:
.
Well use flashtool to flash a kernel like jackie009 or any other that works for you.....
Click to expand...
Click to collapse
i dont know master...
from the very first i learned to flash ZU, i've used flashtool until now too...
G sound said:
i dont know master...
from the very first i learned to flash ZU, i've used flashtool until now too...
Click to expand...
Click to collapse
Just flash 757 ftf not kernel..flash it with flashtool not recovery...it will restore your phone....then root it again...
Sent from my C6833 using Tapatalk
G sound said:
i dont know master...
Click to expand...
Click to collapse
I'm positive that I've seen this pr0n before.
Sent from my C6833 using Tapatalk
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
G sound said:
need help...
i've used flashtool many times until now, i dont know whats wrong with it...
1. my ZU got boot loop, then i force to turn it off... (i want to get in to recovery but there is no sign that my zu has it... )
2. i've tried to flash kernel to my zu but failed... (
3. so i tried to flashed my zu to a new one (rom), but i got no signal at all...
4. then i tried again no 2 but got the same result...:crying: (hope that i can to restore my backup from recovery)
what i have to do guys...
i hope there is a kind peoples that will try to help me... (i wish :angel: )
regards
Click to expand...
Click to collapse
Download this: https://mega.co.nz/#!Vh8xEZYR!HwGosI...VlhUObM0NdNrPg
Make sure your phone is turned off.
Start Flashtool and click the lightening bolt at the top left and select 'FASTBOOT MODE'.
You should now see a new window of flashtool titled FASTBOOT TOOLBOX.
Plug in your phone while holding the Volume Up button
Back on flashtool: To the far right where it says 'By DOOMLORD', just below that the second option is 'Select Kernel to Flash', click it.
Browse for the .IMG file that you downloaded from the top of this post(which is the boot file for your phone to boot and let you into recovery).
Change the file type that's listed next to File Name at the bottom of the browse window, to .IMG
Select the .img file and it should flash automatically and tell you to check the log list shown right in flashtool before rebooting. If you don't see any errors then go ahead and unplug your device and boot it and try going into recovery.
You should be good to go now.
LordManhattan said:
I'm positive that I've seen this pr0n before.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Yes master...:good:
CEROSERDNA said:
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
Click to expand...
Click to collapse
Me too but before I got stuck...
CEROSERDNA said:
Installing a kernel is a simple process.
I am runnnig DoomKernel on Nordic stock .757
battery life is great
Click to expand...
Click to collapse
Me too but right now I got stuck...
Jammol said:
Download this: https://mega.co.nz/#!Vh8xEZYR!HwGosI...VlhUObM0NdNrPg
Make sure your phone is turned off.
Start Flashtool and click the lightening bolt at the top left and select 'FASTBOOT MODE'.
You should now see a new window of flashtool titled FASTBOOT TOOLBOX.
Plug in your phone while holding the Volume Up button
Back on flashtool: To the far right where it says 'By DOOMLORD', just below that the second option is 'Select Kernel to Flash', click it.
Browse for the .IMG file that you downloaded from the top of this post(which is the boot file for your phone to boot and let you into recovery).
Change the file type that's listed next to File Name at the bottom of the browse window, to .IMG
Select the .img file and it should flash automatically and tell you to check the log list shown right in flashtool before rebooting. If you don't see any errors then go ahead and unplug your device and boot it and try going into recovery.
You should be good to go now.
Click to expand...
Click to collapse
I can't download it... It say invalid argument...
G sound said:
I can't download it... It say invalid argument...
Click to expand...
Click to collapse
I think we need to see a log or screen grab of the output of flashtool when you try and flash a kernel and a FTF
I think "invalid argument" normally happens on a locked bootloader???
blueether said:
I think we need to see a log or screen grab of the output of flashtool when you try and flash a kernel and a FTF
I think "invalid argument" normally happens on a locked bootloader???
Click to expand...
Click to collapse
Sorry I forgot to unlock bootloader again...
But even I unlock it I'm still stuck...
I'll send the log when I get back to my home then...
Thanks again to all of you masters...
G sound said:
Sorry I forgot to unlock bootloader again...
But even I unlock it I'm still stuck...
I'll send the log when I get back to my home then...
Don't forget to backup you TA PARTITION before you unlock your device,
If you need any help PM me ill be glad to help
Click to expand...
Click to collapse