I`have htc hd2 with windows mobile , i`ve tryed to intstall MAGLDR.. and my install was broken .. Now my Htc is freeze just HTC displayed ..i`ve tryed hard reset .. but it doesn`t work .. Just HTC displayed . It`s freeze .. Can somebody help me please..
First of all, congratulations to your first post and welcome to XDA.
... but more info, please.
Have you installed HSPL2.08 before you tried to install MAGLDR?
Have you already tried to flash the original ROM for your HD2 to get your device functional again? (from bootloader or with sd card method)
Have you had a look on mskip's tutorial before you started flashing?
at the first step , I`ve tryed to install MAGDLR . ROMUPDATEUtility.exe I started from this .. and a screen showed With a HTC hd2 photo , PDA Phone ROM update Utility 3.27.4.3 Is the name of this screen .. So I put my HTC hd2 in Synce. and I just Click Next Next Next .. and the installation sad Is complete . So Nothing else I just tryed This .. And My Htc is Now freeze .. I cant use it in USB mode . I cant start it .. at startup Just freeze HTC and nothing else .. :S:S Sorry about my English .. and thank you cuz i dont know what to do I`m totally confuzed ..:S:S
Can somebody helpMe Please ..
I dont kknow what to do .. Cuz I`m new & an amateur :S Pls help me by my problem
Related
i dpgraded my gene n it worked fine but after 1 week ,when i restarted it hangs it doesnot even starts. i tried to install wm 6 again but its cid lock
what should i do pls some body healp me
Get a New One .lol
Hi bro'
Don't panic ! My suggestion - see the video posted by bryangopan for tricolour boot screen problem and follow the steps .
Good luck !
he guys
searched the forum, didnt found anything about my problem
btw sorry for my bad english
ok .. i got modacco 2.9, radio etc etc ... everything up to date
today i made a backup and a wipe to install the eclair rom .. just for fun ( damn my ****in ideas lol )
runs perfect, then i made a nother backup and wipe to install one of the themes in the theme section ( it was a theme especially for 2.9 )
oh and i got a modded bootscreen .. the right light like K.I.D
no i got the problem .. that i can only see that red light .and nothing happens ..
i had to move my accu to start again and made restore backup
red light is still there .. and nothing happens
got an idea ?
please help ;-)
i hope i didnt brick my hero
o lord have mercy !!!
update
i found out that i got another update.zip on sdcard ... ( i named it updateor.zip)
so i chossed change update zip and chossed the norther custom rom ( could be the original `?!?!? 9
now i got the original boot screen
the first page is ok ..
but
the second ( hero with the green pokemon ;-) ) stays ... then screen turns black an the sam logo reutrns over and over and over
i think, i lost some data to boot ?
do you got any ideas ???
what can i do ???
dear mods
please close this thread
my hero is back again
i dont no how
i dont no why
and i dont give a f*****
muahahaha
tried backup three times
two times no boot
third time .. jipii !!!
Sorry, bobderdritte,
I've seen your post right now. It's to late to answer.
You did it alone!
no problem
i dont how i get it
i wiped it several times .....
lol
@ mods ... please close this fred
problem solved ....
Sir,
can any one tell me how to restore my htc p3400i back to normal. i have a device HTC P3400i GENE100. i use a guide on this site of KRAZY_ABOUT i successfully install orefkov and after install that i upgrade my original ROM WM6.0 to cooked wm6.1 (by lemlon). after install the cook rom i get my device too slow so then i reinstall RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship.exe i was really dont know it was for old gene. after install it my HTC is restart and not booting up and not going into bootloader mode and i tried evey combination of key (camera+power button or vol+cam+power or press both "-" button and insert batt.)to go in bootloader mode.... PLZ Help me i m suffer with this problem.
http://forum.xda-developers.com/showthread.php?t=506467
now only gene jtag method can help u !
search for gene_jtag_restore_revised and u will find
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
amolji said:
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
Click to expand...
Click to collapse
install a new ROM thats it
PRoblem solved
Even my device is bricked because of this ROM
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
amit_nikharge27 said:
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
Click to expand...
Click to collapse
hi amit,
i am also finding the solution for this. but now i m sure i have only last way to restore this with JTAG method, so i m collecting information about this JTAG method, if i able to restore my GENE with this i will definitely create a full guide for new bee who are struggling with this problem...
so keep u r eye on thread.....
bye....///
Hey hi, guru,
did u managed to restore your device using JTAG method.
could you please share me the steps if you have resolved it.
any one need information on j-tag.....?coz i recovered my lost gene b4 6 months ago using this j-tag.....so simple.....
Why do people go around flashing ROM's blindly?? :angry:
It is clearly mentioned everywhere i read not to flash original ROM's without removing the radio parts..
Please don't flash a rom who contains IPL, SPL or GSM. It will brick your device. Sometimes in a irreparable way.
People should pay more attention to everything mentioned here..
Hi rony_z367,
b4 8 months i lost my mobile due to upgrading spl,but it was in warranty...
now my gene is working fine with cooked roms but still i want to know about J-Tag.
sry abt my english
It is the process of recovering the memory addresses of ur ARM where u can directly connected to the respected hardware & re-program that h/w with ur given addresses.....but its so risky.....finaly ur addresse comes to 00....
Actually i didn't understand it completely..
but thx for info..
the pleasure is all mine.....thnx......
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
nipinder said:
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
Click to expand...
Click to collapse
Just guessing - did you flash Radio ROM which is compatible with your ROM (usually list of compatible Radios you can find in the first few posts of the thread of ROM)
nipinder said:
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
Click to expand...
Click to collapse
Restart from bootloader mode. Make task29, After install a new version of Radio (2.15) and then flash a custom ROM. If you do not know how to make that, send a pm to me.
nipinder said:
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
Click to expand...
Click to collapse
If you could post your "bootloader" info (what does is show), custom ROM+radio info, HD2 version (T-moUSA or EU), and the method/process you used to flash that would help us help you quicker
hey guys thnks for ur replies
my hd2 is nt a t mobile its a normal htc hd2 with 512 flash memory size
my radio version is 2.05.51.05_2
protocol version 15.28.50.07U
my stock version was 1.48 then later i made it 1.48 hspl then later to install duttis n4s legacy v3 i installed 1.66 hsplversion.. then ROM works its jus wenever i restart it wont boot i always have to hard reset it..
guy thnkx for ur replies ..really appriciated
guys thnlx a lot for ur help
changed the radio version to 2.11 its works like a charm..
thnkx guys
Hi i am new here .. well i have a htc hd2 device .. and i tried to install android 4.1.2 jellybean with a guide from youtube but when i completed the first step my photo just open and i close it so i can continue the steps .. but when i tried to connect it at my computer i press volume down and power and nothing happened .. i tried everything to open it and nothing can smone help me? (sorry for my bad english)!