I have a problem: when i put my phone onto the HD dock the phone recognizes the dock and the hdmi cord, asks me if i want to use the webtop or the entertainment center. I choose one of them i got nothing on the screen. The tv's hdmi works fine (with my laptop for e.g). i tried with a different cord, but nothing changed. i made a video of it (sorry for the quality): [i can't post urls, so if you're interested search on youtube for Motorola Atrix 4G HD dock probably faulty. Thanks]
Please help me, i don't know the solution. I have googled after it almost for a week!
I have Motorola MB860, at&t branded Atrix 4G, but it is unlocked, i use it in Europe. Got the latest firmware (OTA). Unrooted, unmodified.
Thanks
Add:
add: the hdmi just doesn't work without the hd dock. i attach the hdmi cord to the phone and select entertainment center, and i get blank screen on the tv.
select a different input on the TV perhaps?
I have like 6 different inputs on my TV and I had to go through each one and wait a little bit to make sure the signal kicked in.
I know it was connected through the HDMI port, but I still had to cycle through the inputs to get it to appear.
still weird
thanks for your answer. i didn't checked it, but i had an lg optimus 2x (p990) and with the lg's hdmi port worked correctly. i know i should wait a little bit, i have been waited for 3 minutes! so i'm starting to think my phone's hdmi wrong. can i test it somehow?
whats ur webtop version?
it is WT-1.2.0-110_OLY-6
System version is 4.5.141.MB860.ATT.en.US
Related
I just got the photon and hd station got it home and connected it to my rca flat screen tv's hdmi and when I touch webtop it goes to a blue screen that says unsupported but I can play all day with it on mirror phone on display "PLEASE HELP"
What is saying "unsupported"? The TV or the phone? Sounds like it might be some type of TV setting that needs to be changed. Do you know anyone with an HDMI capable monitor that you could test it on and see if it works?
If you can, try to narrow it down to which device is causing the issue, whether it is the flatpanel, dock, or phone. Will be easier to troubleshoot.
Also, just an FYI, sometimes the Webtop is funny. Last night I plugged my phone/dock into flatpanel that has run with Webtop before and I couldn't even get the Webtop option to come up. Then plugged it in this morning at work and it came up no problem.
Post back with more info and I'm sure someone can offer more insight.
I can see that my hdtv is getting a signal from the phone but the tv screen stays black and my phone hdmi port is fine visibly and my cord works for my xoom. My photon is stock rooted whats going on?
demigod3030 said:
I can see that my hdtv is getting a signal from the phone but the tv screen stays black and my phone hdmi port is fine visibly and my cord works for my xoom. My photon is stock rooted whats going on?
Click to expand...
Click to collapse
have you tried to restart the phone.....
yes, nothing blank tv screen no Motorola symbol and no options pop up on the phone when hdmi is connected cord is good works for other devices and when the cord is plugged into the phone the tv gets a signal but its stays blank
I have had problems with cheepie cables from monoprice. The mini hdmi connector is intermittent. Better cables work fine. You may want to try another cable.
Sent from my MB855 using xda premium
I had this problem the first couple times I tried hdmi. Then one day it started working and its been fine ever since. I'm not really sure what the problem was or how it was solved.
I don't get a menu to select mirroring anymore. I used to have it with this cable and this tv. It's not an option now. I just get a Motorola logo on the tv. Mirroring used to work a few weeks ago, so something has changed with the phone. I'm not running a custom ROM, haven't disabled anything and no special software. Rebooting doesn't help. Anyone found a fix?
the first couple of times I tried I would just get the motorola symbol and no mirroring option than a day latter I tried again and it worked. Not sure why.
Have you tried cycling through your tv settings once and than back to hdmi?
i dont know what happned. i decided to reflash the current stock through rsdlite and im now able to mirror and use my kickstand again so im happy now ill root and see if thats why it stopped working
ive had my MHL cable for over 2 weeks now and its got the official samsung logo - and i got it from suntekstore... only problem is i havent got it working...
ive tried with my dads stock 2.3 i9100 on a viewsonic monitor and samsung tv
same with my 4.0.4 i9100 resurrection remix 1.7 + siyah 3.1.2
the other two items i got from suntekstore were 2 OTG adaptors which fail to work... (i also have one that does work from another store) so i think it might be the MHL adaptor itself
yesterday i was frustrated and kept plugging my phone in and out of the samsung tv.... and BAM i got a visual =S after like 10 'no signal' and 2 resolution not supported... but the screen was stuck in portrait... thats the closest ive come to using MHL properly!
on top of that... when i use OTG keyboard connection... the phone freezes if i try pressing caps lock to check for power on my phone! any one else running same OS version and its working?
When successfully connected via MHL the S2 will display in portrait, so that was normal. Apps that run in landscape will do so when run, or where sensor orientation works, like in photo gallery etc, you can rotate it to landscape yourself.
No, as for your issues regarding getting the picture to stay on; first, you did have the Samsung Charger plugged into the MHL cable right, and the correct output channel selected on your tv?
Assuming you did for both the above, the problem is likely with your hdmi cable, not the tv's. Have you tried using different cables? I have a problem with one of my hdmi cables where the screen goes black for a few seconds whenever it pleases, with another cable (which comes with the sky box), it stays on all the time. So try changing cables and see what kind of response you get.
Also, some users have mentioned that they seem to get picture when they put their phones into flight mode first, I've never needed to do this, but give it a go and see what happens. Once you've got your picture up, you can use your tv's remote the control your S2, assumming your tv supports that function.
Hope that helps
I have not tried that rom but last I heard any source based rom doesn't have a working MHL output. I don't know the status at all of OTG on source based roms.
You said you tried it on your dads stock phone but didn't clearly state if it worked or not which it should if the phone is stock. So use that as a basis of if the adaptor is broken.
thanks guys - yeah it could be the hdmi cable... they are pretty cheapo - but on seeing 2 OTG adapters from the same store dont work... the MHL being broken cant really be a coincidence? it was in delivery for over 1 month =[ maybe someone broked it! lol
I think in the end it was the MHL adaptor... ive got a replacement sent out as now the phone wont even recognise power to charge when plugged into the mhl however the charger directly into the phone works! argh may be a long wait for the replacement took 30 days to get my other shipment! may have to resort to a more expensive one
I bought a Viewsonic g tablet on sale a year and a half ago and until this day it meets the light. (It was only touched when purchased then back to the box)
I followed the instructions to the letter (new on this) and everything seems to be working, I have a Malata zpad dock DS-A002 supposed to be fully compatible with the g tablet and I placed the tablet on the dock, connected HDMI in the TV but nothing happens.
Don't see an option in settings to select output to TV.
Many thanks in advance.
Forgot to mention, tried this on the TV which is an LG and monitor which is a Hanns-G
I have to say that this is a first so far. When I read this I went ahead a connected up my dock which is the same make and model as yours to my TV and it works. HDMI is sometimes a pain especially with the newer TV's that are out. You also got to have the dock powered up if you haven't done that. If the power cord is connected and the tablet displays the dock clock then connect the HDMI to the dock with the TV turned off. After connection is made turn on the set and make sure you are on the proper input. It should work, but if not try a different TV.
Sent from my Super BadA$$ Bionic.
Thanks for the reply
The LCD TV is a couple of years old, the LCD monitor is 3ish years old
My mother has a 5yr old LCD TV, that's another TV I could test on
The dock is powered up using the charger that came with the gTab
The tablet displays the dock clock when placed on the dock
I've tried different combinations:
Dock powered up, TV off and plugin cable, gtab on then place on dock, turn TV on
Dock powered up, TV off and plugin cable, gtab off then place on dock and power on, turn TV on when gtab is on the dock clock
Dock powered up, TV on and plugin cable, gtab on then place on dock
Dock powered up, TV on and plugin cable, gtab off then place on dock and power on
TV detects HDMI when the gtab is placed on the dock, but after 3-5 secs says no signal meaning it does detect HDMI (shows up as an option, I've tried on all 3 HDMI inputs btw) but it doesn't show up an image.
I've tried these methods in the TV and the monitor, nothing
Doesn't make sense to me since everyone in the thread hasn't had this issue, should be plug-and-play right?
http://forum.xda-developers.com/showthread.php?t=1900562
Should I backup the current install and go back to the stock crappy ROM just to test it out? (Wipe everything as instructed before doing so?)
Thanks
No since in going all the way back to stock to test it out. Have you by chance tried a different HDMI cable. You might have a faulty connection or even a dirty connection will make it loose its connection. You may also want to check to see if the TV has a default native setting set. The gtablet will display a image like a PC I believe. Will have to connect it up again to see what res. the device puts out at default.
Alright find the link up solution. I tried different ways of connection all with failure to display on my TV with the exception of this. Try it and you will be satisfied.
1st. Place you dock near your TV with power cord and HDMI cable both connected. Don't connect other end of HDMI cable to TV just yet.
2nd. Have tablet turned on and fully booted up. Then place tablet on dock and leave the dock clock displayed.
3rd. Turn on TV and set the input to the HDMI connection you are about to connect to. Then connect HDMI to that input that is in TV and the display should reflect the device.
Let me know if this works. Thanks.
Sent from my SmoOth A$$ Gtablet
Hi, yes I tried 2 different cables, different ports, cleaned up (blow air) into the TV and and dock ports (dock is brand new never used from a year+ ago)
I couldn't find a default native setting on the TV.
Really sucks that there is an awesome ROM for the gtablet and I can't use it on the bigger screen, intention was to watch Netflix and movies, besides reading
The tablet is one of those projects that never happened and when I finally manage to get it going this happens...:crying:
Read the addon that I posted. It will connect if you connect it in that order.
Sent from my DROID BIONIC using xda app-developers app
Hi Nobe, it still doesn't work. I just don't get it.
TV recognizes the connection (shows as plugged-in) but says no signal.
Unfortunately monitor is not as advanced as a TV, simply says no signal.
Faulty dock? It charges fine
Thanks
Went to stock, and image shows up fine on TV
Is there something I could change, DPI,res? on the current SmoOth install (have backups) that could potentially fix the issue?
Thanks
exmagus said:
Went to stock, and image shows up fine on TV
Is there something I could change, DPI,res? on the current SmoOth install (have backups) that could potentially fix the issue?
Thanks
Click to expand...
Click to collapse
I keep mine at 160dpi. The issue is that you have to connect everything to the dock before connecting it up to the TV. For some strange reason the dock settings doesn't recognize the connections being made. The dock works fine it is the drivers I believe that are kernel related. If you power up the dock with the HDMI connected to it, then place tablet on the dock, then connect the HDMI to the TV's input with the TV on and turned to that input. Then it should display onto the TV without issues. Done this multiple times when this came up and this was the only way for me to get the dock to display the output of the tablet.
Sent from my SmoOth A$$ Gtablet
The thing is I did exactly as you said multiple times to be sure.
Using SmoOth image does not come up
Restored to stock ROM and image shows up fine
I'm going to try a fresh SmoOth install and see how it goes or is there any way to check the drivers or make adjustments to it?
Thanks
Any advice on checking the drivers?
Thanks
Actually the drivers are there and working the way they are suppose to be. I do believe that it might in the way it is communicating with the TV still. I am currently working on something that might help out, but I want to test it fully before suggesting it since most everyone doesn't use this feature.
Sent from my SmoOth A$$ Gtablet
It is really odd that doing the same process on the stock rom works.
Thanks a lot for the follow-up Nobe
Curious if anyone found a solution to this problem? I too have the exact same issue with my Gtab even after trying the solution posted with different cables and such. Stock rom works fine though.
I'm wondering if Nobe found something
Hi...sorry if this is the wrong place, but from my understanding they are the same phone and I didn't see any category specifically for the evo v...
At any rate, so I bought an ikross mhl to dvi adapter, hoping to connect my phone to an 18" LCD I have, but so far no luck with any of 3 monitors. I've connected the phone to a wall charger and tried hooking it up in different orders, to no avail...basically have followed every suggestion I can find.
I've now purchased an mhl to hdmi adapter from newegg for my TV and hopefully will at least verify the general functionality is working (when it arrives on the Monday following this post), but eventually would prefer it on the monitor. I also bought an HDMI to DVI adapter, just as a long shot.
I scoured google before I bought the adapter and every indication seemed like it should work fine, and now have scoured google + these forums again, but just not really finding much info related to my specific hardware.
The phone is rooted, running the latest Harmonia rom and is S-ON...I don't think that would affect it, as everything else on the phone so far has worked flawlessly, however, can't rule it out. There is a guide floating around on how to "turn the evo v into a evo 3d", so if this is rom-related, it's something to try? Requires going S-OFF, but even if it didn't fix anything, at least I'd get the radio updates. But again, from my understanding, the hardware is identical and this phone should be able to do standard mhl, so i assumed mhl to dvi should work as well, but I'm a little unsure about the standards...
Any insight is greatly appreciated and as I always do, if I find a solution, I will post
Still a no-go with an MHL to HDMI adapter, connected to my TV. The closest I came, was the phone went into dock mode if I didn't have the charger connected. Oh and if I unplugged the HDMI cable from the adapter, the TV would say check cable...So the TV was aware that a device was connected, thus it seems the issue lies in the phone.
Anybody have any idea what I could be missing? This /should/ work - the Virgin Mobile site even lists hdmi output as a feature of this phone, but no further mention in the manual and as I said in the OP, spotty info around the web
UPDATE: Just tried it with a monitor again, using an HDMI to DVI adapter, with the new MHL to HDMI adapter, and it almost wants to work - the monitor stays awake (not saying "no signal") and the phone registers that it's connected via hdmi, but the most picture I can get on the screen is but a flash when I change the phone's orientation =/
A second hdmi mhl adapter that I had ordered arrived today (was not expecting it for a month or I wouldn't have bought the other one...oops) and it works on the tv w/ full mirroring
Still a no-go on the monitor - it does the same as the other adapter. The phone and monitor both know it's connected, but only occasionally flashes of video appear and rather than any mirroring, the phone just says "play a video or slideshow" (which does not work).
So I guess the moral of the story: if you have an HTC EVO V 4G from Virgin Mobile (which is more or less the same phone as the EVO 3D) and you want to hook it up to a computer monitor: good luck! I mean, I'll test some more with other monitors on this new adapter but not getting my hopes up. Will post any positive findings, tho...
On the other hand, if you want to hook it up to a TV, it's just a matter of finding the right adapter...in my case, it was pretty much luck of the draw. One worked; the other did not. Maybe the other one will magically start working or will work with one of the new TVs I bought, but we'll see...
Anyway, here is the specific adapter that is working for me: not allowed to post links. Sorry! You all lose. Thank you spammers.
you also need to be on jellybean, or higher for the hdmi to work I do believe, otherwise the phone os if below doesnt recognize or work for hdmi out. the jellybean update made it so anyphone with micro usb out should be able to connect to hdmi with the mhl adapter.
I think its simply a matter of analog vs digital video signal. A computer monitor will need a digital video signal but a TV will be happy with either analog or digital. And I'd guess the output of the MHL adapter is analog.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2