Anyone get this to work on their Note? I plugged in the MHL adapter from my Infuse and nothing happened. No hdmi input detected by tv and no notification on the phone either.
Am I doing something wrong?
randaddy said:
Anyone get this to work on their Note? I plugged in the MHL adapter from my Infuse and nothing happened. No hdmi input detected by tv and no notification on the phone either.
Am I doing something wrong?
Click to expand...
Click to collapse
Mine works fine. Did you connect your phone charger to the MHL adapter?
Make sure you have USB debugging enabled in settings -> applications -> development. Mine didn't display either until debugging was enabled.
Related
What would you say is the best ROM to use with the MALATA dock on G-Tab
cant get mine to work. only charges
hozayjmmpr said:
What would you say is the best ROM to use with the MALATA dock on G-Tab
cant get mine to work. only charges
Click to expand...
Click to collapse
What do you mean by you can't get it to work? You don't have video, USB or Ethernet? Or is it all of the above?
USB and HDMI work for me on Vegan 5.1.1. I have yet to try ethernet, as I just got around to loading pershoot's latest kernel. I hear it works though.
I am running the Vegan-GingerEdition [4/11].
http://forum.xda-developers.com/showthread.php?t=1031250
USB, HDMI, and charging all work. I don't really have the ability to check if ethernet works.
all of the above only charges
thanks all for the help
have some work todo
dock
pyro530 said:
What do you mean by you can't get it to work? You don't have video, USB or Ethernet? Or is it all of the above?
Click to expand...
Click to collapse
correct don’t have video, USB or Ethernet it only charges
I’m sure I’m doing something wrong?
Think it may be the rom any suggestions are welcome
hozayjmmpr said:
correct don’t have video, USB or Ethernet it only charges
I’m sure I’m doing something wrong?
Think it may be the rom any suggestions are welcome
Click to expand...
Click to collapse
Not to insult you, I recommend keeping the screen on, or turning off the screen timeout. USB Debugging should be on as well.
I am also having problems getting the Malata Zpad dock to work for me. I am using TnT Lite v4.4.0. I am not planning on using the HDMI connector, but would like to connect to the internet through the ethernet port and would also liike to use the USB port. When I connect an ethernet cable, the green light by the port comes on and the yellow light blinks, however, I do not see how to have the gTablet use the ethernet port. Under "Wireless and newtworks". there are no options for a network connection -- there is only Wi-Fi -- for turning on and off, Wi-Fi Connections for setting up Wi-Fi and Bluetooth settings and turning on and off. How do you force the gTablet to use the ethernet port? I am able to see a Thumb drive when I plug it into the USB port on the dock through the iFileManager application. However, the USB drive does not show up as "Storage" -- this item only shows "Tablet Storage" and "SD Card" but they may be the way it is supposed to work. Any help with getting the Ethernet port to work would be appreciated.
Thanks
I was just about ready to pull the trigger on purchasing a dock. This info is great.
Hi guys, i bought the MHL adapter from T-Mobile's website for the Sensation 4G (i have an Evo 3D). I set everything up, plugging the MHL adapter into my phone, standard HDMI into the adapter and TV, and the usb cable into the adapter...
After plugging everything in nothing happens. I even tried playing a video and nothing occurred. How do i activate the video out? Do i just have a bad MHL adapter?
A few questions. Does the battery icon on the phone show it is charging? This means that power is going to the adapter and to the phone. If not, try changing power adapters. If the charging icon is there, then try changing HDMI cables. If this doesn't work, you might have a bad MHL to HDMI adapter.
with your tv off, plug your mhl adapter into your phone, plug your power cable into the adapter, turn your tv on and bam! (note that the hdmi doesnt display the lockscreen)
Rydah805 said:
with your tv off, plug your mhl adapter into your phone, plug your power cable into the adapter, turn your tv on and bam! (note that the hdmi doesnt display the lockscreen)
Click to expand...
Click to collapse
My lockscreen shows and boot animation , Also to OP ...the hdmi mirroring is not as stable as HDMWIN is for the OG Evo imo, i had to play with it a bit to first get a picture on my Sammy (unplug/replug/reboot etc.)...then i got pic without sound (OG worked w/audio), ended up running hdmi through my Yamaha amp and that worked. Still not as stable as my 4g evo....LAME
btw I've read usb can't be plugged into pc for powering, must be plugged into wall adapter
louforgiveno said:
btw I've read usb can't be plugged into pc for powering, must be plugged into wall adapter
Click to expand...
Click to collapse
my macbook pro powers it fine. weird.
I was using it with my stand that had a video on/off button to turn the display on an off. Everything was mirrored fine but I had no audio and hulu was intentionally shutting off the hdmi before any video played. Are they blocking media streaming apps from displaying through the mhl adapter? Oh an i powered mine by pluging it into my ps3.
Eat it iPhone said:
Hi guys, i bought the MHL adapter from T-Mobile's website for the Sensation 4G (i have an Evo 3D). I set everything up, plugging the MHL adapter into my phone, standard HDMI into the adapter and TV, and the usb cable into the adapter...
After plugging everything in nothing happens. I even tried playing a video and nothing occurred. How do i activate the video out? Do i just have a bad MHL adapter?
Click to expand...
Click to collapse
Funny that you ask this. I just got an MHL adapter off of Amazon that was just the adapter itself (micro USB one end, female HDMI on the other).
I connected the HDMI cable to my TV and MHL adapter, then I connected my MHL adapter to my phone. Last but not least, I connected my power adapter directly to the MHL adapter and my phone started charging.
The input should be immediate from your phone but if it doesn't, check the following:
1. Make sure your TV is on and the input is selected for the proper HDMI port. If nothing is detected, the TV should report that it's receiving no signal.
2. Make sure the power cable is plugged into your MHL adapter. From my experience, it will not push out the HDMI signal without external power.
3. From my experience, you have to connect your phone to the MHL adapter LAST. NOt sure why but if everything else checks out fine and your phone still isn't pushing out a signal, reconnect the phone to the MHL adapter. You should get an HDMI icon on your top bar.
I have the EVO3D stock.
Everything works fine for me (pictures, music, video) except Netflix. For some reason Netflix looks extremely pixellated. Not quite sure why when everything else looks fine.
Every time i try to connect my MHL adapter recently it will not output to the TV. TV is fine, HDMI cables are fine, adapter works with other devices.
ONCE i did get the MHL adapter to work properly however the rom was very buggy and i had to switch. Even on stock i can not seem to get my phone to output to the TV. It always says MTP Device Detected and never displays out to the TV. I tried USB Debugging but that didnt seem to change things. Im confused, what can be causing this? All my hardware seems fine, i have tried too many roms to count, what can be making me have this problem?
Any help / suggestions will be helpful
Have you got power connected to the MHL adapter?
Sent from my GT-I9100 using XDA App
Fizzerr said:
Have you got power connected to the MHL adapter?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Sure do, even found a power adapter that puts out more power because i thought the one i was using wasnt working properly (1000ma instead of 200ma)
Phone shows its charging, but also comes up with that MTP Initilization message.... put it into USB mode and i dont get that message, but no MHL either.
Ok, a bit more testing, using a HDMI to DVI cable i can connect my phone into my computer screen and it works fine! Using the exact same setup on my TV, nothing. Use the same HDMI port on my TV that my other cables were using, nothing. Use different cables (That work on other devices), nothing. Aparently my TV is not accepting the signal from my MHL adapter.
My TV is a Sony KDL 46E400.
Ideas why i can connect to the monitor just fine but the TV doesnt work?
I've got a new MHL cable and a USB OTG cable in the hope I could plug my MHL into the SGS3, use a powered USB hub connected to the Micro USB(as this requires independent power) on the MHL and then connect a keyboard and mouse into the USB hub, then connect the HDMI to the TV.
For me it doesn't work. I thought this was the whole reason they changed the MHL cable to the new type. Can anyone else confirm?
Logicalstep
Logicalstep said:
I've got a new MHL cable and a USB OTG cable in the hope I could plug my MHL into the SGS3, use a powered USB hub connected to the Micro USB(as this requires independent power) on the MHL and then connect a keyboard and mouse into the USB hub, then connect the HDMI to the TV.
For me it doesn't work. I thought this was the whole reason they changed the MHL cable to the new type. Can anyone else confirm?
Logicalstep
Click to expand...
Click to collapse
I dont think Hub will work on the phone, I am not sure....
Anyway GS2 MHL no longer will work on SGS3, Samsung has released seperate MHL for SGS3, which are available in the Market,
I bought it and tested, working fine for me...
ZACQ8 said:
I dont think Hub will work on the phone, I am not sure....
Anyway GS2 MHL no longer will work on SGS3, Samsung has released seperate MHL for SGS3, which are available in the Market,
I bought it and tested, working fine for me...
Click to expand...
Click to collapse
i am planning to get the MHL for S3, if i connect it to the TV, are usb drivers needed in order for it to function properly?
thanks in advance
use a powered USB hub connected to the Micro USB(as this requires independent power)
Click to expand...
Click to collapse
Afaik the S3's MHL-Adapter is self-powered and does no longer rely on an external power source to operate. (Hooray!)
if i connect it to the TV, are usb drivers needed in order for it to function properly?
Click to expand...
Click to collapse
No, that's a pure HDMI adapter and thus Plug&Pray
Make sure to get a MHL adapter for the S3, the adapters for the S2 and other devices are not compatible to the new pin layout.
Hey there, i have tried gathering information about this subject and it seems all threads always lead to this announcement:
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Short: Samsung have changed to an 11 Pin-out to enable USB OTG and MHL Hdmi out at the same time. I purchased an original HDTV Adapter (EPL-3FHUBEGSTD) which as far as i can reliably count indeed has about 11 connectors inside the USB connector that goes into the phone.
Now, i can get HDMI out just fine, but ONLY when i also connect the MHL adapter to a power source (a PC USB Port will do fine), however i have also read, that the phone is able to power the MHL adapter itself but obviously would not be charged then (no surprises there). This does not work however.
Further, connecting a USB OTG cable to the micro usb port on the MHL adapter does nothing. No notification and no devices connecting. No power either, since the LED on my USB Hub does not light up as it should. Connecting any devices to the hub does nothing to change that situation. If i leave out the MHL adapter and connect the USB OTG cable directly to the phone, everything works perfectly. I have tried this with 2 different OTG cables so they are not the problem.
This is an original genuine HDTV Adapter for our phones, which according to that post should be working fine with USB OTG.
AFAIK, this topic --does-- come up more frequently now as i can find a few more discussions about it, albeit none really helpful:
http://android.stackexchange.com/qu...-of-11-pin-mhl-connector-in-samsung-galaxy-s3
http://forum.xda-developers.com/showthread.php?t=1743128
http://forum.xda-developers.com/showthread.php?t=1803079
http://en.wikipedia.org/wiki/Mobile_High-Definition_Link#11-pin_MHL-USB_Connector
http://forum.xda-developers.com/showthread.php?t=1811435
That wiki entry is the most interesting link as it definitely states that using MHL and USB OTG simultaneously is possible and is also the reason why the 5 pin layout was changed to an 11 Pin layout.
Looking forward to reading your replies!
the ability to use MHL and OTG simultaneously would give the S3 so much more purpose. It is powerful enough to replace a desktop computer used only for light stuff like browsing and watching videos, and even simple gaming. If samsung made a dock like the one for the motorola atrix I'm convinced they will broaden their target group. The atrix got everything right with this but is inferior hardware wise. I love the idea of a one device for everything concept. Unfortunately it doesn't rhyme very well with the growth society.
Love the MHL and the OTG is even better only after I got the correct cables as the cables changed on S3 to the S2 version, unlimited space for watching films on my phone is now awesome and even better connecting it to to the TV just need a good dock,
is there perhaps any expert advise on this? According to multiple sources it should work but really doesnt. Did i buy the wrong mhl adapter?
I think they will only both work together when being used with an MHL enabled tv. That way the power comes from the tv and the usb on the adapter can be used for the usb-otg cable.
Sent from my GT-I9300 using Tapatalk 2
But if i connected the MHL with the s3. Would sound come out of my phone AND my TV or just my TV. If it justs comes out of my TV, then can i hook up my bluetooth headphones and listen to my video or it would not allow me?
Thanks
joysleep said:
But if i connected the MHL with the s3. Would sound come out of my phone AND my TV or just my TV. If it justs comes out of my TV, then can i hook up my bluetooth headphones and listen to my video or it would not allow me?
Thanks
Click to expand...
Click to collapse
I think you already got a reply in the other thread on this, you should use subscriptions.
mertzi said:
I think you already got a reply in the other thread on this, you should use subscriptions.
Click to expand...
Click to collapse
It wasnt clear.
No1 knows the actual answer to this questions. Really frustraing
joysleep said:
It wasnt clear.
No1 knows the actual answer to this questions. Really frustraing
Click to expand...
Click to collapse
Ah ok sorry! Afaik you should be able to choose your headphones as primary audio source in the bluetooth settings. I know I can choose what I want to be output to my bluetooth headset, but I don't own an MHL adapter so I don't know about that. Someone with one should be able to try it, and if they don't own a bluetooth headset/pair of headphones they could try with wired ones and see what happens.
mertzi said:
Ah ok sorry! Afaik you should be able to choose your headphones as primary audio source in the bluetooth settings. I know I can choose what I want to be output to my bluetooth headset, but I don't own an MHL adapter so I don't know about that. Someone with one should be able to try it, and if they don't own a bluetooth headset/pair of headphones they could try with wired ones and see what happens.
Click to expand...
Click to collapse
I have recently received an MHL connector (5 pin type) and the samsung 11 to 5 pin adapter for it. I can confirm that if I plug my OTG cable into it, and then into my powered USB hub, I can get the MHL to work just fine, both video and audio. The OTG cable powers it just fine, but does NOT allow me to use other devices attached to the USB hub.
I am still researching. I suspect you need to bring all 11 pins off the phone with a splitter of some sort, or possibly wire data lines through the MHL. Probably not with the 5 pin MHL connector and 11 to 5 pin adapter, but with the full 11 pin MHL adapter. I am not up to that level of hardware hacking. I suspect whoever does it first can sell a BUNCH of them!
Oh, and I have a Moto Lapdock for my Raspberry Pi, and would love to hook my S3 to it too!
Scott