HI I wanna install streakmod on my dell streak but I am having problems with my fastboot. I managed to install the drivers and got the fastboot_mode but I was unable to execute the commands. When I executed it, it kept saying that the command fastboot is not recognized! May I know what's the problem? TKS!
You're in the wrong folder, you need to be running it from whatever folder you have fastboot in
Ok. Tks for ur reply. But it seems that I have forgotten where I installed it in. Is there anyway to reinstall the drivers?
Sent from my HTC Legend using XDA App
And one more thing, the driver was stated as Android ADB interface. Is it correct?
Sent from my HTC Legend using XDA App
Related
The commands aren't going through i did cmd nothing happens says can not find path... i should have sdk on my computer i downloaded not to long ago... plz help me.
Are you trying to unlock the bootloader?
Yes.....
Sent from my MB855 using XDA Premium App
http://briefmobile.com/motorola-photon-4g-bootloader-unlocked
Take a look at that, and tell me what step you're at. And If you've downloaded all those required files. And I can help you, cause I had the same problem.
Alright thanx, ill get on that soon an reply back
Sent from my MB855 using XDA Premium App
Sounds like a plan.
GraphicDemon said:
IVE never done fastboot before so my mind is going nuts!!! i did cmd nothing happens says can not find path... i should have sdk on my computer i downloaded not to long ago... plz help me
Click to expand...
Click to collapse
To unlock bootloader u don't need sdk i unlocked mine on a pc all i did was run rsd lite. Once dat was done i put phone in fastboot mode, open cmd cd to the moto-fastboot folder(mine on the desktop) connect phone to pc and run commands worked flawlessly
Sent from my MB855 using XDA Premium App
Thanks already know that commands wouldn't accept on phone. But I figured it out had to reboot and try fastboot again
Sent from my MB855 using XDA Premium App
Hi all,
I am trying to write software that runs on the PC, and uses adb/fastboot commands to the devices.
I know that there are manuall methods to get into the fastboot mode, but I am looking for a way to do that automaticlly from software, very similar has the RUU of HTC does.
Do you have any idea how they do it?
thanks
mishelkosa said:
Hi all,
I am trying to write software that runs on the PC, and uses adb/fastboot commands to the devices.
I know that there are manuall methods to get into the fastboot mode, but I am looking for a way to do that automaticlly from software, very similar has the RUU of HTC does.
Do you have any idea how they do it?
thanks
Click to expand...
Click to collapse
Adb reboot bootloader
Sent from my ADR6425LVW using XDA Premium App
Thanks for the quick reply,
I have tried "adb reboot fastboot" but I get the message "error:closed".
I am not working on a rooted phone.
My objective is to write an automatic executable from PC, like RUU,
that will open root and/or flash, push new system image.
new phones on HTC and Samsung have unlocked boot loaders which allow to flash and update ROM or images.
But in order to do that the user has to get manually to fastboot.
Is there any other method to get into fastboot in a non-rooted phones?
thanks
mishelkosa said:
Thanks for the quick reply,
I have tried "adb reboot fastboot" but I get the message "error:closed".
I am not working on a rooted phone.
My objective is to write an automatic executable from PC, like RUU,
that will open root and/or flash, push new system image.
new phones on HTC and Samsung have unlocked boot loaders which allow to flash and update ROM or images.
But in order to do that the user has to get manually to fastboot.
Is there any other method to get into fastboot in a non-rooted phones?
thanks
Click to expand...
Click to collapse
I assume you have USB debugging enabled? I have never seen the error closed message before. Even unrooted adb reboot works
Sent from my ADR6425LVW using XDA Premium App
Thanks for the quick reply,
I have tried "adb reboot fastboot" but I get the message "error:closed".
I am not working on a rooted phone.
Click to expand...
Click to collapse
try "adb boot bootloader" instead.
(i got here with the same problem and this worked for me so i just wanna update this old thread)
So I soft-bricked my tablet trying to downgrade the hboot to 1.0...03. It is not recognized as an adb device. All drivers are correctly installed, Everything is in line, but I still cannot get it to do anything. Hboot says relocked with a security warning, and even trying to run the RUU through a .zip file is not working. I'm hopelessly lost... Battery is charged up fine too. Help me, please.
Shameful self bump...
Where are you trying to use adb meaning what state is your flyer? If in hboot then adb would not recognize it, go into fastboot and use fastboot commands
Flyer
That's the thing. Adb does not see it.
butters789 said:
That's the thing. Adb does not see it.
Click to expand...
Click to collapse
Can you access the bootloader?
P.S. ADB commands work only when the OS is booted up, otherwise - you need Fastboot commands
Yes. But fastboot commands weren't working either.
Sent from my LG-P999 using xda app-developers app
butters789 said:
Yes. But fastboot commands weren't working either.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Just a reminder: to use fastboot, you must select "FASTBOOT" option in the bootloader, and you'll see "FASTBOOT USB" in the bootloader.
Try to redownload adb/fastboot utilities
I'll try.. but I've done this already.
Sent from my LG-P999 using xda app-developers app
Edit: I got it fixed. Stupid n00b mistake the entire time, Fatality, thank you for helping kick me in the right direction.
Hi!
I have a similar problem with my Best Buy Easy phone 3.5; in my case adb sees my phone and all works properly.
My problem is; where can i find a stock rom??:fingers-crossed:
Thanks So much in advance
pickle_pk said:
Hi!
I have a similar problem with my Best Buy Easy phone 3.5; in my case adb sees my phone and all works properly.
My problem is; where can i find a stock rom??:fingers-crossed:
Thanks So much in advance
Click to expand...
Click to collapse
Look for in the forum thread for your device
Flashed a recovery for international and now I cant boot up. I can enter Bootloader and Fastboot. ATT Model.
flash the recovery for ATT
Where? I thouht I did but IDK
www.teamw.in
Still cant get past boot
help mee
hukel56 said:
help mee
Click to expand...
Click to collapse
Have you gotten it to boot? I wrote some instructions on what to do when I went through the same issue. Search my posts.
Sent from my HTC One X+ using xda premium
gamepr said:
Have you gotten it to boot? I wrote some instructions on what to do when I went through the same issue. Search my posts.
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
My adb is finding device? also in TWRP when i click adb sideload its says
Updating partition details...
E:Unable to mount '/system'
Running boot script...
Finished running boot script.
Starting ADB sideload feature...
Now send the package you want to apply to the device with adb sideload
What do i do nowwwww
I am stuck at the Boot Screen to be clear.
EDIT: I used in Terminal
sudo kextunload -v /System/Library/Extensions/EasyTetherUSBEthernet.kext
Because I had used a tethering app on it. I can see my device now!
Have you tried starting from beginning - lock and flash rug? Should be the easiest turnaround, especially you saying wanna return it? Unless you really can't get it to fastboot usb mode
Sent from my HTC One X+ using Tapatalk 2
I have fastboot usb. I will try RUU tomorrow, my friend has a PC. I have MAC.
Im trying to adb sideload QX Senseless but when I try to nothing happens in terminal and stuff?
I managed to fix my problems and i am going to flash back to stock jb sense. Thanks for all the help.
I've been struggling with ADB for the past week or so, and have been unable to see my HTC One X+ no matter what I've tried. Then I decided to install Ubuntu using VirtualBox and voila, It can see my device using the same computer with no problem. I ran an ADB restart just to make sure and it worked. Can anyone tell me why this is and hopefully tell me how to fix it?
This all started when I tried to run an RUU and it couldn't find my phone. RUU's don't run on Linux, so this doesn't solve my problem, just seems to point at Win7 being the issue.
P.S. I've had 5 Android devices, all 5 have successfully connected with ADB on this same computer in the past. I've installed custom ROMs on all of them and have used ADB quite a bit over the past few years. I'm not sure what changed in the past year since I last used ADB that now causes it to not see my device.
Just noticed that I can see the phone in the bootloader using "fastboot devices"... even more confused now!
Well you only need fastboot for an ruu so your good there, maybe you need to setup a path in environmental variables for adb or uninstall and reinstall drivers
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
Well you only need fastboot for an ruu so your good there, maybe you need to setup a path in environmental variables for adb or uninstall and reinstall drivers
Click to expand...
Click to collapse
The path is already there, the commands work, just no device to send them to. Already tried uninstalling/reinstalling drivers and the Android SDK.
Not sure how I can use fastboot for the RUU though... I've tried running it from the Windows desktop and it can't find the device. I did try running it while in the bootloader and it starts the process but always fails within about 3 minutes with an Unknown Error.
The only way you can flash an ruu is through fastboot
Also remember fastboot only works in bootloader and adb only works in os and recovery
Maybe post the entire input/output from cmd/terminal here when you run the ruu
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
The only way you can flash an ruu is through fastboot
Also remember fastboot only works in bootloader and adb only works in os and recovery
Maybe post the entire input/output from cmd/terminal here when you run the ruu
Click to expand...
Click to collapse
The RUU file I downloaded from HTC is an EXE file. How do you run that in fastboot?
I know that ADB doesn't work in the bootloader, but on my computer it isn't working in Recovery or in the OS.
Still best guess is wrong drivers but at this point it really doesn't matter as you can only use fastboot anyhow
The .exe is supposed to walk you through the steps, what happens when you click on it?
Can you extract the contents and do it manually?
fastboot oem rebootRUU
fastboot flash zip nameofupdate.zip
Sent from my Nexus 4 using XDA Premium 4 mobile app
When I run the RUU file in Windows it tries and fails to connect to the phone. I will do some research on extracting the necessary files from the RUU and manually flashing. Thanks for the help.
Finally fixed using these steps!