[Q] Did I brick my friends Moto Photon, please help - Motorola Photon 4G

Hello all great group I have learned many great ways of rooting etc here. Have a HTC Hero that I rooted and run CWM 7 on for over a year no problems and a NOOK Color with same.
Now my friend thinks I am a phone guru, so he gave me his Motorola Photon to do the same. First I unlocked the phone, rooted it and then tried to flash CWM, problem is the phone wont do anything, just shows main screen with, UNLOCKED and the red MOTO logo, tried to reset, clear all data and do a factory re set, and have the same problem. I have searched the threads here and there are so many just cant seem to find what to do.
Any help will be much appreciated. Thanks to all the posters and root/rom experts here, but must admit sometimes I am not sure what you guys are talking about. I can follow directions just need the right ones.

Donkeyloco said:
Hello all great group I have learned many great ways of rooting etc here. Have a HTC Hero that I rooted and run CWM 7 on for over a year no problems and a NOOK Color with same.
Now my friend thinks I am a phone guru, so he gave me his Motorola Photon to do the same. First I unlocked the phone, rooted it and then tried to flash CWM, problem is the phone wont do anything, just shows main screen with, UNLOCKED and the red MOTO logo, tried to reset, clear all data and do a factory re set, and have the same problem. I have searched the threads here and there are so many just cant seem to find what to do.
Any help will be much appreciated. Thanks to all the posters and root/rom experts here, but must admit sometimes I am not sure what you guys are talking about. I can follow directions just need the right ones.
Click to expand...
Click to collapse
- Use RSDlite to SBF to 198_6 or if you want to start clean, 154_5 and then let the phone update to 198_6 via OTA.
- Reboot the phone and press power+Vol up to RSD mode
- Use derpunlock.sbf and flash that
- Pull the battery to reboot the phone
- Press power and vol down while booting to get into fastboot mode
- Connect the phone to the computer and let the drivers install
- Open cmd window and go through the fastboot commands to install CWM 5.0.2.7
a. moto-fastboot devices (make sure it shows a connection)
b. moto-fastboot erase recovery
c. moto-fastboot flash recovery recoveryXXXX.img (or whatever you've named your recovery)
d. moto-fastboot reboot
- Now that you have CWM...root your phone, or flash a ROM..if you have any questions, watch qbking77's videos or refer to Lokfish's compendium in the DEV section.

Thank you that did the trick
You really came through and helped me out. Now the phone is back to normal
Will be rooting and adding CWM what is a good stable ROM to use.
Thanks again

You may also have to rename /system/etc/install-recovery.sh to install-recovery.sh.bak to get it to stick. The MoPho checks the recovery on boot and will re-install it if it isn't the right one.
I'm a MoPho-in Martian

FernBch said:
You may also have to rename /system/etc/install-recovery.sh to install-recovery.sh.bak to get it to stick. The MoPho checks the recovery on boot and will re-install it if it isn't the right one.
I'm a MoPho-in Martian
Click to expand...
Click to collapse
Yes..great catch...root the phone after unlock and download root explorer to make this change and then flash cwm to make it stick
Sent from my MB855 using xda premium

Thanks all for your help
Thanks for the help and quick reply, will follow your advise. I know rooted and adding the CWM and custom ROM's was one of the best things I could have done for my HTC Hero and NOOK Color, just takes time, for me anyways, to find the links needed for unlocking, flashing CWM, custom ROM's etc.
Is there a place I am missing that lists these mor readily availiabe and organized? I have tried to follow the YouTube videos, but they always state to click on the link which leads back here for the downloads and have yet to find those.
Keep up the great work and I will be keeping my eye on this board

All the files you should need are hosted herehttp://forums.acsyndicate.net/showthread.php?3362-Photon-FIles&p=16666#post16666.
Sent from my Photon

Dont worry the samething happen to me and what i did is whatch the video how to unroot the motorola photon better do the faster you can before the batterie is gone bqqking the guy with the videos in youtube he would teach you how do it just fallow the step=]

Thanks for everyone's help
Thanks to all those that replied, everything is back to normal. I just ordered my very own Moto Photon and should arrive by today or sat. Cant wait, believe me will be spending many hours here on the forum and again thanks to all that helped.

Related

How to Root/Recover/Flash Soft Bricked Phone. All-In-One Guide.

I remember when I was looking for all this info I had to jump from board to board to board and
experience tons of trial and error when I was successful with my own device then wounded up
bricking my phone or someone elses based on other factors, or OCLF/CWM not working in recovery,
all that fun stuff.
So I decided to design this guide as a way for a person to make one stop at this guide, and
find everything you need with some tips I had to learn the hardway.
First while YES you can root/flash your phone from 2.2 Froyo official Samsung it is more complicated
and you risk a LOT more. I HIGHLY recommend doing a flash BACK to 2.1 update 1 to make your phone
bone stock to the way it was when you first bought it (Or if you bought it with 2.2 the way it was at launch.
Its a MUCH easier process and almost impossible for something to go wrong in the process. These
steps will help if you have also bricked your phone (Kinda bricked anyways)or its stuck in a bootloop.
Also while rooting is great to apply some Lag Fixes and such there really is no point unless
your going to flash a new ROM (or OS if you're new to this) because you probably don't use your
phone to utilize any of this stuff anyways.
Before you start please be sure to have the drivers working for your phone on your PC.
If you are running Windows 7/Vista and User Account Control (UAC) is enabled, be sure
to right click the Odin icon and select Run as Administrator.
DISCLAIMER:This is my contribution to the wonderful android community here that has given me
a wealth of information on this subject, and had it not been for these boards and others like
it I would not be able to enjoy my phone and the contributions made here by so many hardworking
people. With that said. I AM NOT RESPONSIBLE FOR YOU DAMAGING YOUR PHONE.
1.Back up everything in either Titanium backup or to PC (PC backup can only save Pictures etc.
not your message logs/call logs/account settings/etc.) A Nandroid backup should work equally as
well.
2.Shut Down phone into Download Mode so Odin can recognize phone.
-If phone is in boot loop or bricked:
-Plug USB cable into PC
-Take out battery
-Put battery back in
-Hold Vol Up + Vol Down buttons at same time
-While holding inster USB cable into phone
-Odin should now recognize device in download mode
3.Load Files into proper fields. (.TAR into TAR,.PIT into PIT)
4.Do not check any other boxes then defaults. You only want the PIT file and .TAR files for this.
5.Click Start.
6.Phone should begin flash process
NOTE: EVERYTHING ON YOUR PHONE AT THIS POINT WILL BE ERASED! KERNEL, BASEBAND, ROOT, ETC.
YOUR PHONE WILL BECOME COMPLETELY STOCK AS THOUGH IT WAS JUST PULLED FROM THE SHELF
IN THE UNITED STATES.
7.If process completes the phone will reboot on its own. If it gets stuck in any one process
without moving, just close the program, and repeat steps. Might take a few tries.
Once stock OS of 2.1 Update 1 is applied you can install the update.zip on the SD.
NOTE:YOU DO NOT EXTRACT THE .zip! JUST SIMPLY PLACE IT ONTO THE INTERNAL SD IN NO FOLDER.
If you're running 2.2 froyo and you were just flashed back to 2.1, then you should already have
an update.zip. Thats fine, delete the old one and replace the new one.
1.Now that the update.zip is on your phone the rest is really is. You can root your phone using
this file from your phone. Go into recovery by holding the Vol Up+Vol Down+Power button at the
same time while the phone is off. Let go once the Vibrant logo appears.
2.Select reinstall packages. Phone should reboot and you are now rooted!
If from here you want to flash a ROM over your current OS its simple.
1.When the phone reboots and you see you have SuperUse permissions you are rooted.
2.Go to the market and download ROM manager.
3.Select Install ClockWork Recovery Mod for your specific phone within the ROM manager app.
Find your ROM, Drop it into your SD the same way as the update.zip
4.Shut down your phone and boot back into Recovery Console.
5.Select Reinstall Packages again. This should Install ClockWork (CWM) OVER your recovery console.
If it doesnt take the first time just do it again, it will take you to a different color
console.
6.Once in CWM select the item using the Vol Up or Down buttons and power to select on Install
Zip from SD card.
7.Then pick Choose/Select .zip to Install.
8.Find your ROM, Select it. Select Yes to install.
9.WHAMMY your device is now installing the ROM and you have a flashed and rooted super android phone
on steroids.
Hope this helped.
---Giddy Ninja
FILES
http://files.androidspin.com/downloads.php?dir=androidspin/samsung/vibrant/&file=T959UVJFD.tar<---SGH-T959 JFD Image
http://files.androidspin.com/downloads.php?dir=androidspin/samsung/vibrant/&file=s1_odin_20100512.rar<---512 PIT File
http://files.androidspin.com/downloads.php?dir=androidspin/samsung/vibrant/&file=Odin3.rar<---Odin Application
**References used to build this tutorial when I F**ked up my own device**
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
http://forum.xda-developers.com/archive/index.php/t-810442.html
http://board.teamwhiskey.com/viewtopic.php?f=29&t=636
http://androidspin.com/2010/08/04/all-about-root-for-the-samsung-vibrant/
http://forum.xda-developers.com/showthread.php?t=849028
http://forum.xda-developers.com/showthread.php?t=991267
http://forum.xda-developers.com/showthread.php?t=732458
Good guide for noobs
Sent from my SGH-T959 using XDA Premium App
Good post I have and will be linking it to some ppl with problems thought you deserved your first thanks lol
Thanks for the responses and any feedback or critique on where/how I can make this guide more accessible is appreciated (PM please)
I wanted this to help people who are new and scared. lol
The guide that s15274n has is like the bible to this. but I know sometimes that much information can be either overwhelming or confusing to some.
So hopefully this helps out some people!
Thanks for the post man. The more ways to help the better. Mine has a ton more detail, but some may not want / need that much.
s15274n said:
Thanks for the post man. The more ways to help the better. Mine has a ton more detail, but some may not want / need that much.
Click to expand...
Click to collapse
And that is EXACTLY what I was hoping to accomplish. Sadly though I didn't stumble across your thread last night when I had soft bricked my brothers phone and was doing a million google searches to find the work around on his boot loop frenzied phone (Recovery console was even corrupt).
So after what seemed like 1000 snipits from different articles I was able to mostly compile this. And then throw in some warnings for future rooters/flashers.
Had I known Samsung's own 2.2 release was going to be so AWFUL compared to 2.1 I never would have upgraded. But then again if I probably never would have flashed/rooted. haha. Oh well what can you do.
update.zip signature verification failed
the update.zip doesnt work in my DEfy
e: signature verification failed
installation aborted.
searching in xda developers i found this thread...
http://forum.xda-developers.com/showthread.php?t=995131&page=4
i dont really understand what is this update.zip for... yours is 600Kb and this one is 140Mb! this file is just to root the mobile right? I am a bit worry about to use this file... maybe i will get a Defy brick... hehe
any suggestion?
thanks a lot
jose
jacortijo said:
the update.zip doesnt work in my DEfy
e: signature verification failed
installation aborted.
searching in xda developers i found this thread...
http://forum.xda-developers.com/showthread.php?t=995131&page=4
i dont really understand what is this update.zip for... yours is 600Kb and this one is 140Mb! this file is just to root the mobile right? I am a bit worry about to use this file... maybe i will get a Defy brick... hehe
any suggestion?
thanks a lot
jose
Click to expand...
Click to collapse
You are in the vibrant forms you need to go to the xda defy fourm.
http://forum.xda-developers.com/forumdisplay.php?f=852
Yea sorry I can't help you out. As stated above this is a Vibrant forum. So don't use that update.zip. Only two things I can tell you are go to the link above, and im sorry you bought a Motorola. Lol.
Sent from my roided out Vibrant.
Sir... i have faced a problem inmy swipe konnect plus smartphone. When i try to power on my phone it automatically goes to recovery mode. Service center says that phone cannot be flash.. so i decide to flash manualy
. Plz help me.. my phone unable to open... how to root my phone .. please help me...

Unroot access Help please.....

Hey guys I have to send back my thunderbolt to VZ, I just got the Charge instead cuz the TB sucked!!
I rooted my TB and all, I was ready to Unroot using the ADB way... I uploaded the 3 files and then it says ADB: no such file for the recovery part.
So Then I wiped my cache and my Partition thinking I was good to go with the upload from Zip through recovery. That didnt work
Now Im trying to get the phone into Download mode so I can connect using Odin. Then Flash a Stock Rom using Odin onto phone....
Also when in Terminal App on phone and get SU permissions and then try ADB: Reboot Download or recovery , I get ------ No Such Tool?
questions are How do I Unroot this Damn phone to send back to VZ???
And how do I flash stock Rom without Odin?
The TB in no way sucks. It will slaughter that POS Charge.
Luke
Odin? isn't that a samsung thing?.. HTC uses RUU's
Thunderbolt doesn't have a download mode.. and when in the terminal on the phone you don't need the adb: part.. just "reboot recovery" and when using adb on the computer don't use a colon ":" either just adb
Anyways.. here is a link to unroot.. it should help
Also.. I went from the Charge to the thunderbolt... much happier... Charge battery life was just about as bad.. if any better its because its a slightly bigger battery
yurdle said:
Odin? isn't that a samsung thing?.. HTC uses RUU's
Thunderbolt doesn't have a download mode.. and when in the terminal on the phone you don't need the adb: part.. just "reboot recovery" and when using adb on the computer don't use a colon ":" either just adb
Anyways.. here is a link to unroot.. it should help
Also.. I went from the Charge to the thunderbolt... much happier... Charge battery life was just about as bad.. if any better its because its a slightly bigger battery
Click to expand...
Click to collapse
been searching dude, Im stuck it doesnt load and for some odd reason not letting me flash a rom. Any suggestions?
http://www.androidpolice.com/2011/0...t-the-htc-thunderbolt-and-return-it-to-stock/
thats what I been following, when I go to the reboot recovery it says no such file
Sorry you are having trouble. Please read this thread:
[HOWTO] Restore to stock for root users and non-root users UPDATED 5/17/2011
http://forum.xda-developers.com/showthread.php?t=1009423
It is an update from the method you have been trying. I assume you are still rooted? Follow the first part of the tutorial, it is for rooted phones needing to return to stock. I have used this method a couple of times without issue.
I would suggest starting from the beginning and re- download all of the files. Check mdsum5, painstakingly follow each and every step and you should be returned to stock in about 20 minutes once you have downloaded all of the files.
Odin is not a tool we use with the Thunderbolt. We use ADB shell and Hboot and CWR as means of flashing Roms, radios and other files to our phones. I assume you are at least a bit familiar with these as at some point you rooted your phone.
Another piece of advice, its free and you don't even have to thank me; when you get your new awesome Charge and you start having issues with it and you just can't seem to figure out which key words to rub together in Google to find the magical solution. You may want to avoid going to the Charge forums asking for help stating that the Charge sucks but you people should help me out anyway. You might find that people are more inclined to help you out. I'm just saying.....
tswltd said:
Sorry you are having trouble. Please read this thread:
[HOWTO] Restore to stock for root users and non-root users UPDATED 5/17/2011
http://forum.xda-developers.com/showthread.php?t=1009423
It is an update from the method you have been trying. I assume you are still rooted? Follow the first part of the tutorial, it is for rooted phones needing to return to stock. I have used this method a couple of times without issue.
I would suggest starting from the beginning and re- download all of the files. Check mdsum5, painstakingly follow each and every step and you should be returned to stock in about 20 minutes once you have downloaded all of the files.
Odin is not a tool we use with the Thunderbolt. We use ADB shell and Hboot and CWR as means of flashing Roms, radios and other files to our phones. I assume you are at least a bit familiar with these as at some point you rooted your phone.
Another piece of advice, its free and you don't even have to thank me; when you get your new awesome Charge and you start having issues with it and you just can't seem to figure out which key words to rub together in Google to find the magical solution. You may want to avoid going to the Charge forums asking for help stating that the Charge sucks but you people should help me out anyway. You might find that people are more inclined to help you out. I'm just saying.....
Click to expand...
Click to collapse
Very well put...
Sent from my ADR6400L using XDA Premium App

[q] a noob's quest to unlock 2.3.4

sorry if i am asking a question asked for too many times already,but i can't seem to find a solution to my case,or either the thread is no longer active since the TS did not update his results,thus making me confused if he hassuccessfully or unsuccessfully rooted his atrix
i'm using atrix mb860 ofw 2.3.4.and i'm trying to install neutrino 2.2 rom gt
so here are what i had done until now:
1.rooted my atrix using Pete's One Click Root : http://forum.xda-developers.com/showthread.php?t=1258599
2.installed titanium backup and backed up batch of everything.superusered.
3.Installed cwm from market and got superusered.
4.flashed cwm recovery for atrix 4g
5.tried to install romracer using cwm.selected to restore previous roms and also chosen both wipes but failed.atrix reboots and shows "failed to boot , starting rsd mood"
what my concern is about,is just "rooting" enables me to already install roms?if it does,what did i do wrong in my steps?if it does not,please show me the way.i do not know if i should or should not flash my sbf files and bootloader
also,i read that to show that my atrix is rooted,it shold show at the top right corner during boot.but i don't see any
please help me because i really don't know what i'm doing here.i'm still new and the guides provided by the developers are for experienced people.it does not provide the detailed steps.also,please do explain some of the terms used like what is the difference between rooted and unlocked devices.
if you are too tired to explain everything all over again,then just give me the required links.i'll learn my way.btw,if you are able to give me a working link,and updated threads that would be very hopeful since some don't re-edit their first post,thus needs us to find the answer in a 1000++ replies
thank you in advance
You need to unlock your bootloader. The text you're referring to in the upper left corner of the Motorla screen is "unlocked" and it only appears after you unlock.
You can do it manually. See here.
Or automatically. See here.
You CANNOT install a CWM without unlocking your bootloader first. Rooting does not let you install ROMS, unlocking the BL does.
thanks for the reply.so that's what i'm missing.is it necessary to flash my sbf?and since neutrino rom gt changes my kernel(i think).
so after unlocking my bl,i can then install romracer->neutrino then?i'll update again and see what happens
graphidz said:
thanks for the reply.so that's what i'm missing.is it necessary to flash my sbf?and since neutrino rom gt changes my kernel(i think).
so after unlocking my bl,i can then install romracer->neutrino then?i'll update again and see what happens
Click to expand...
Click to collapse
Yes, the pudding unlocker is a small 10mb sbf file. After flashing that with RSD, you'll run the fastboot oem unlock commands.
The kernel (boot.img) is completely different from the bootloader. (if I'm reading your ? correctly).
Correct: Unlock BL>install romracer CWM> BACKUP! > install your ROM of choice
okay,this is starting to get on my nerves.i went to pudding,then scrolled down to "RSDLite/Windows Drivers/Sbf_flash"->go to hxxp://goo.gl/vfUXc link->tried but failed as it's for at&t.mine is international then.just great!
went back topudding's thread.read again..."unlock"...YES!solution for international phone!heck,this is an sbf file,what am i going to do with an sbf file?if it's just copy and paste,that will be easy.
ok,so what i really need now is a real solution to an international atrix and not at&t's atrix.or is there actually another thread for just international atrix?i just don't understand at all.please help
http://www.youtube.com/user/TheSmokingAndroid
Ck the earlier videos that he has posted on unlocking the atrix, helped me quite a bit.
FINALLY DID IT!now to install neutrino gt!thanks for all your help guys!.this guide was indispensable:
hxxp://forum.xda-developers.com/showthread.php?t=1302423
a new question : how do i install romracer?the guide did say to install itbut i don't see the app?
nvm,finally able to install neutrino.thanks a lot guys!now where's the close thread button...
no wait,again another problem!i wanna ask at neutrino's thread but this stupid 10 posts rule is preventing me.so i need to ask here.after installing neutrino,my internal memory is left with 2gb only.where is the other 8gb?when i plugged into usb,i did find them.
to note,i used cwm to install neutrino gt.the zip file was in internal.does that have anything to do with it?any way to get it back?do i need to flash neutrino again?if so,please teach me
also,how to get the market back?

OX+ need help flashing.

Ok, you know, today I got my phone, I had been waiting forever, I got it and within 2 hours I screwed it up. I have followed and followed many forums and posts on how to fix this, and I am just.. lost. So please i need your help, I am seriously stressing out, and I know I shouldnt, but this is my first android phone. I am shot right now.
I had unlocked the bootloader, and then I tried to root it, then it rebooted and went into bootloop mode or whatever it is.
I still cannot figure out how to use this Hasoons2000's OX+ AIO kit. So I am just leaving it alone.
Ok the PC doesn't recognize it as a storage device, but the fastboot does recognize it, as I have executed a few commands, like reboot or something, just to test that it works.
My phone is ATT but I am in Russia so there is no sending this anywheres. All I want to do is reboot the OS and have it work again, I dont care what mod or stock rom it is, I just really need some direction here.
I know something about RUU, ATT RUU, Fastboot, some other stuff, I have like 5 pages on XDA pulled up and I cant figure this out.
What is the CMW or TWRP or whatever it is called? How do I flash a zip or an img to the phone? I really just want my phone on again.
Yes Ive done stupid noob stuff, but you learn. So please I am kindly asking for any assistance,
No need to stress. Its fairly hard to brick your phone, good way to learn quick also is to screw with it.
Just need the right guide and I think this will help you since u have fastboot access hopefully. Its a pain rebuiling so read everything so u only have to do it once.
Remember these guides are for different phones so don't use the ruu or recovery links, user my links below.
Your phone is:
AT&T(Evitare)
This guide:
http://forum.xda-developers.com/showthread.php?p=30863908
Or this guide:
http://forum.xda-developers.com/showthread.php?p=27301573
This is for another phone so you need to choose an ATT ruu from here for step 1:
Your phone is a HTC One X+ for AT&T(Evitare)*
http://www.androidfiles.org/ruu/?developer=EvitaRE
More info here for custom recoveries etc which is cwm and twrp for deploying roms, backing up your current installed Rom and general tools for fixing or enhancing your phone, displayed prior to your phone booting into android:
http://forum.xda-developers.com/showthread.php?p=37778531
Sent from my HTC One X+ using xda premium
somemadcaaant said:
No need to stress. Its fairly hard to brick your phone, good way to learn quick also is to screw with it.
Just need the right guide and I think this will help you since u have fastboot access hopefully. Its a pain rebuiling so read everything so u only have to do it once.
Remember these guides are for different phones so don't use the ruu or recovery links, user my links below.
Your phone is:
AT&T(Evitare)
This guide:
http://forum.xda-developers.com/showthread.php?p=30863908
Or this guide:
http://forum.xda-developers.com/showthread.php?p=27301573
This is for another phone so you need to choose an ATT ruu from here for step 1:
Your phone is a HTC One X+ for AT&T(Evitare)*
http://www.androidfiles.org/ruu/?developer=EvitaRE
More info here for custom recoveries etc which is cwm and twrp for deploying roms, backing up your current installed Rom and general tools for fixing or enhancing your phone, displayed prior to your phone booting into android:
http://forum.xda-developers.com/showthread.php?p=37778531
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
thank you very much I really appreciate your help. I finally figured out the ruu.exe thing, I didnt know they had to be the same numbers, ex 1.15.xxx.xx or whatever.
You see what happened originally was that I unlocked the bootloader, easy pie, but I tried to root it and that is when it started looping. Maybe I didnt understand something, but I seemed to have messed up right there.
Is there really any reason to root? I mean yeah there is super user, but doesnt bootloader help with that a bit? I know BL is for flashing custom roms and all.
May I ask how to flash a custom rom? I really want all of this ATT stuff off of my phone, I really dislike it.
Yes I know I can search, here, google etc. And maybe I should, but I end up getting so many different results, and here and there, and this and that. It really is just easier to talk to one single person who knows what they are doing. So if you could help me, I would again extend my appreciation.
Also I have the android revolution for ox+, and I dont know if it is.. you know.. THE BEST or not. Dont know what to do.
And yes, you live and learn, took me forever with iphones, then I realized hacking and roms and stuff were completely different from iphone. So new game new story.

lg l9 p769 - droid 4.0.4 - i'm lost, could use help, linux user

i have been seeing a lot of threads about rooting this phone, but, they all have windows scripts, even the thread that is said to have a runme.sh does not have it in any of the links that i unzipped - only a runme.bat, but yet, people keep mentioning a runme.sh in it... also, i really don't see any one lying out the steps for doing this with linux.
i'm a noob, and dont really know much about this stuff, but i've done this ONCE before with a galxy exhibit, but it was very easy, i just copied a file to the phone (stock rom?), rebooted into recovery, told it to recover from that file, and i was done.
i have no idea how to do it with my new phone, and so i'm wondering:
1: where can i find the files i need to do this with linux - i just want root, nothing special
2: where can i find the steps necessary to do it - in the easiest manner possible?
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
any help is appreciated.
sentientsystem said:
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
Click to expand...
Click to collapse
Your phone is running ICS 4.0, that is the version which it shipped with. Pretty much everyone on here has upgraded to JB either with software update on the phone or they have manually updated with the offline KDZ flash method.
I dont have any experience in linux so I cant help. I hope you can get your phone rooted!
Sent from my LG-P768 using xda app-developers app
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
sentientsystem said:
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
Click to expand...
Click to collapse
You would need wine and then set it up...
Sent From My Xperia Themed P769
well, i tried that "LGpwn" and it didn't work, as well as a fake lg-recovery app. i figured out that i've got a "10g" phone (P769 V10G ICS). i'm not sure what the next step is. some one mentioned downgrading to JB... is there some where you can point me to for that???
i've GOT to get this t-mobile junk off my damned phone... i've even TRIED to install cyenogenmod, but i can't figure out how to get my phone to go into recovery mode (NOT factory rest) - i've tried volup+power+home and volup+power, and neither seem to be working.
Setup a sandbox, windows xp. LG uses windows, no other way to root as of right now for the t-mobile version.
Sent from my LGMS769 using xda app-developers app
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrade to a samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
sentientsystem said:
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrad to an samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
Click to expand...
Click to collapse
Option #1
If you are rooted on stock T-Mobile 10e or 10g ROM and have the CWM installed from this thread:http://forum.xda-developers.com/showthread.php?t=2095825 follow my instructions.
Place one of these CWM ROM images on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2136204
Place this JB radio firmware from T-Mobile 20d ROM on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2256350
Power off the device.
After power on the back/menu capacitive buttons will flash repetedly. Press Volume down while the lights are flashing and the phone should go into recovery.
Flash the ROM first.
Flash the radio second.
Reboot.
***Notes***
1.) 20d is the latest T-Mobile, 21b is the latest Wind Mobile. Both work.
2.) 21b is lighter/faster but has no wifi-calling.
3.) 21b will require you to manually enter your APN settings for cellular data and MMS. Be sure to write down your APN settings before flashing this ROM.
4.) Some users say battery life sucks on JB. I notice that 21b is better on battery life than 20d.
Option #2.
In Linux install a Windows VM and follow the standard instructions here:
http://forum.xda-developers.com/showthread.php?t=2173465
Use KVM with a GUI or even easier use VirtualBox.
I'm a die hard linux geek too. I even run linux at work while all of our msp software was written for windows. You are better off just running an old copy of xp inside virtualbox trust me its just easier that way. You can use adb if you like (its the same thing the windows users use in their batch files and just rewrite the bash script, but you will save yourself lots of headaches just using virtualbox. -- my .02
Sent from my LG-P769 using xda premium
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
# what's the difference between unlocked boot loaders and being rooted?
# do you have to unlock the bootloader to get root access?
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
My bad. I should have read through your original question all the way before posting. I see that you are not rooted.
If you are on 10e ROM you can root in Linux:
http://forum.xda-developers.com/showthread.php?t=1990705
It will require rewriting the batch script as a Linux shell script. It is possible but nobody has done it yet.
If you are on 10g you will need Windows. I have also answered your questions below.
sentientsystem said:
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
It allows you to boot an un-signed kernel. You can boot custom ROMs basically.
# what's the difference between unlocked boot loaders and being rooted?
Root allows you to `su -` to the root user and own the whole system.
# do you have to unlock the bootloader to get root access?
No.
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
Click to expand...
Click to collapse
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
sentientsystem said:
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
Click to expand...
Click to collapse
Welcome!
I know that a long time ago when I ran VirtualBox in Ubuntu there was something I had to do to allow USB access to the VM.
Here are the current instructions directly from Ubuntu:
https://help.ubuntu.com/community/VirtualBox/USB
Good luck.
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
sentientsystem said:
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
Click to expand...
Click to collapse
Yes you can flash a pre-rooted image. They are available. Use the search?
I posted instructions on the first page showing how to boot recovery.
that's great news - that's all i really needed - i didn't see them before, at least, not conspicuously, but i'll search around again.
and, i must have some how missed your instructions, i'll look again.
thanks!
kevev said:
I posted instructions on the first page showing how to boot recovery.
Click to expand...
Click to collapse
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @everyone for your help.
sentientsystem said:
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
Click to expand...
Click to collapse
I've decided to help you out This page will give you some more info on the P769 and several kdz (roms) for the P769
The fastest way to root is to flash the V21B kdz (this is the Jelly Bean version for Canada) using this guide, http://forum.xda-developers.com/showthread.php?p=36351786
The reason why you want this rom is because it has a vulnerability that is easy to exploit with Jcase apk
Once your followed everything (and rooted), install Super Su and Busybox
Next install artas182x second init CWM (in case you can't find it on his page, the link is here )
Note: you will see blinking led lights when you see the LG logo (booting up) appear after a couple of seconds. To enter the CWM press the vol (-) when the lights start flashing.
After you installed Artas182x CWM you can recover from someones clockworkmod backup.
following info from Cmahendra's thread
Note: only restore CWM backups from P769 versions or MS769!!!!
Or check out the V10B (MetroPCS "JellyBean") CWM backup
Now the only 2 reasons to unlock the bootloader are:
1. Install a safer and better CWM
The reason why is because Artas182x CWM is a second init (bootstrap), so if you mess around with a busybox apk and something goes wrong or you remove a file that is required (for CWM), it will stop operating. You will have to reflash the kdz or fix what you changed to get it working again.) I've had this problem several times while messing around with different busybox apps and etc.
2. Custom roms
(which you stated you are not looking for) not worth talking about right now.
Answer to questions
The only pre rooted roms are clockworkmod backups, lol
The default recovery is useless to us (unless you feel like solving the problem)
Flashing back and forth (ice to jelly) comes with risk, the program used on Windows to flash is buggy at times. The best way (in my opinion) is to flash only when really required and mostly restore from clockwormod backups. The device is actually hard to hard brick, but it will require at lot more knowledge to get your device running again.
---------- Post added at 07:23 PM ---------- Previous post was at 07:16 PM ----------
sentientsystem said:
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @all for your help.
Click to expand...
Click to collapse
So what version are you on right now
Ice? Jelly?
i'm still on ICS for the moment. still trying to understand what i need to do next. re-reading your post for the 2nd time, and all the threads it references. making sure i don't screw any thing up. thinking about upgrading to JB, and trying this CWM. and looking into this "cyanogenmod" some more, to understand why i never see any one on this site mention it, and what all these "other roms" are about. lmao, like i said, i'm way new to this . it's a lot to take in, even for a web developer .
thanks \m/ (>_<) \m/

Categories

Resources