Related
I have an X10 mini and use the stock SE ROM with a Garmin Heart Rate band (ANT+ protocol)
In an ideal world, I'd like to upgrade to a 2.2 Froyo rom (or later) which supports:
1) Using the x10 mini as a WiFi Hotspot
2) ANT+
Does such a thing exist, or do I need to stick with the stock rom and Barnacle?
Thanks!
1. I believe it's possible with 2.2 rom
2. No, ANT+ is currently not supported.
Gigglebread has some ANT+ debugging files, but that's 2.3 ..... whatever
Touch the thanks button if I helped you
nilseby said:
2. No, ANT+ is currently not supported.
Touch the thanks button if I helped you
Click to expand...
Click to collapse
are u sure about that?
barnacle works fine on MiniCM1.0.2
OK - so Barnacle will likely work on any custom rom "as well as it does on the stock rom" (that is to say not without its problems, in my experience).
So do all 2.2+ roms for the X10 mini have the standard Android WiFi Tethering Hotspot functionality built in?
And we think that ANT+ doesn't work on any 2.2 ROM, but it might work on a 2.3 ROM (Gigglebread), which lists it as having "bugs" in?
Think I'm going to have to stick with the Stock eclair rom, unless anyone can shed some more light
In custom roms native tethering does not work since they are bulit on top of se kernel. You have to use Barnacle ad i can confirm it work great in MiniCM6
Don't know about ANT, since it's no so widely supported i bought a blueetooth heart rate monitor
Still no custom rom support ANT+? I can say the volume of users via My Tracks is increasing significantly so I'm sure there are other like me who enjoy using the mini pro as a bike computer/GPS etc.
2.3 based GingerDX at least allows me to install the ANT+ radio service and bike dash, but the bike dash crashes on start..
Im currently dualbooting back to the stock rom to leverage it though..
I tried GingerDX and mini-cm6, both dont work with ant+.
If you've rooted your stock ROM then the ANT+ will work, and you can install the Netfilter module AndyX developed in the X8 forum so native tethering works too.
teapea said:
If you've rooted your stock ROM then the ANT+ will work,
Click to expand...
Click to collapse
Not true. I installed stock 2.1.1 rooted followed by minicm6 and ant+ did not work.
What is the reason that ant+ is not working with custom roms?
Is it the kernel coming from other devices??
If so, would a custom mod like gingerDX v015 using a custom kernel based on SEs kernel have working ant+?
schmolch said:
What is the reason that ant+ is not working with custom roms?
Is it the kernel coming from other devices??
If so, would a custom mod like gingerDX v015 using a custom kernel based on SEs kernel have working ant+?
Click to expand...
Click to collapse
I'd really like to know this too!
I heard that ANT+ support is coming to freexperia very soon.
ant+ is now working on miniCM7-2.1.3
Hi, I have a Polar Wearlink belt. I can't connect to my phone but I'm not sure if it should.
Anyone with a similar device?
Polar wearlink won't work unless its Bluetooth version. The Xperia uses Ant+ which is not compatible with Polar. You can buy a Garmin or other Ant+ HRM module and use it on the Polar strap though..
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA App
Hello there, I hope someone can help me with this Question, here I go:
The original bluetooth stack is incompatible with wiimote apps (or any bluetooth controller), so Im looking for a custom ROM that is based on Android 2.3.4 and has another bluetooth stack...
I have tried MIUI ROMs, but I dont like it very much... It cant playback 1080P videos, and some incompatibilities... I tried also Cognition S2 v1.5, Its a very good ROM, but has original stack...
Is there any ROM out there that is like Cognition (root, deodexed, overclocked...) and IS compatible with Wiimote apps?
Thanks a lot, Im testing some ROMs, if I find it myself Ill post it here
EDIT: I also tried dual-boot (for using Cognition S2 and MIUI), but Boot Manager is incompatible with Galaxy S2...
far asim aware CM7 roms work with ps3 and wiimote pads, they use stock BT stack, but the CM7 are still in nightlys( not for daily or n00b use)
Thanks! I have now Cognition S2 v1.5, which is a very good ROM... I noticed that there are some bluetooth(something).apk in /system/app... Can I simply erase them and put the right ones?
Its a good idea to migrate from Cognition S2 to Cyanogen 7? Will I lose something?
Thanks again
Generic bluetooth stack rom
I have Oxygen 2.2 installed on my galaxy s2, it is a stock aosp rom very similar to Nexus s. Sixaxis controller works with it
I am using a XXLPH custom rom , does it effect the usability of the MHL function? Anyway to fixed it
Please help
Thank you
I don't know if my answer will be also valid for ICS but I had a Custom ROM based on XWKK5 and I was not able to use a MHL cable. I tried with my Stock ROM backup and it was working ...
So to know if it's a cable issue or a ROM issue, I would recommend that you restore a stock ROM backup (if you have one of course).
Hello,
can anyone help in operation the MHL cable? since moving to ICS and then JB Roms the MHL cable no longer works for me
(the phone even do not recognize anything when the cable is connected). currently i am using Wanam v13 ROM/
is this a kernel or a ROM (or both) problem? is it a known problem with newer android versions? si there a way to make it work again?
Thanks
Guy.xda said:
Hello,
can anyone help in operation the MHL cable? since moving to ICS and then JB Roms the MHL cable no longer works for me
(the phone even do not recognize anything when the cable is connected). currently i am using Wanam v13 ROM/
is this a kernel or a ROM (or both) problem? is it a known problem with newer android versions? si there a way to make it work again?
Thanks
Click to expand...
Click to collapse
Didn't you already ask this question in the Wanam v13 thread?
Twice?
EDIT to add: I also did a search for "MHL" in that thread, and in addition to your two posts, there are over 20 other posts either inquiring about MHL and whether or not it works, and a large number of posts that report that it DOESN'T work on this ROM.
If you want MHL be guaranteed to work, flash a stock Samsung firmware. Custom ROMs will have varying degrees of this functionality - some will work partially, some will work completely. But only a stock Samsung firmware is guaranteed to work with 100% certainty, barring hardware issues.
MHL
ctomgee said:
Didn't you already ask this question in the Wanam v13 thread?
Twice?
EDIT to add: I also did a search for "MHL" in that thread, and in addition to your two posts, there are over 20 other posts either inquiring about MHL and whether or not it works, and a large number of posts that report that it DOESN'T work on this ROM.
If you want MHL be guaranteed to work, flash a stock Samsung firmware. Custom ROMs will have varying degrees of this functionality - some will work partially, some will work completely. But only a stock Samsung firmware is guaranteed to work with 100% certainty, barring hardware issues.
Click to expand...
Click to collapse
Ok, thanks , sorry for asking a lot but i could not get a straight answer till now (did not find what you have about it not working on Wanam)
But, isn't there some kind of patch or something to make it work even on custom ROM? can anyone help with it?
Thanks
Guy.xda said:
Ok, thanks , sorry for asking a lot but i could not get a straight answer till now (did not find what you have about it not working on Wanam)
But, isn't there some kind of patch or something to make it work even on custom ROM? can anyone help with it?
Thanks
Click to expand...
Click to collapse
Just flash another ROM and see if it's a wanam issue.
As some of the posters mentioned it is a rom related thing.
MHL will usually only work with Samsung based roms. I can confirm that XXLSJ Biftor 4.7 JB and NeatROM 4.1 XXLS8 both work with MHL.
I've had some other roms in the past work but I they're not JB as you are requesting.
Some roms will not do the mirroring but work with video only.
no wanam for the OP.
Or no MHL.
Or whatever.
Sent from the little guy
I installed http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-galaxy-project-t2125984/page141
And cam didnt work.
I installed mx camera and managed to get the front cam working, but i dont want to change roms,
I have herd that flashing stock kernal then using cam then flash stock kernal can fix? but has anyone been threw with with a solution ?
Wold anyone have links to the kernals i need to flash without reinstalling rom?
my cell is..
gt-i9305t 4.3
xxuene4
4g
kernal boeffla 5.4 beta1
I dont know much about this so its a miricle i managed to get this rom working sweet!