Related
Am sitting here breathless .. desperate no clue on what 2 do ! .. They say .. there's a problem with the battery other's say use SEUS .. another people say .. Try flash tool .. bin4ry's ... i really need an advanced help here guys ! SEUS no longer has the Reinstall for the software thing .. not anymore yes .. and Flashtools .. does no detect my phone .. the only alive thing in my phone .. is that Red LED .. works when i press on the power button .. it lights up 3 times .. and the phone turns on only when i connect it 2 the charger .. i dunno if its charging or not .. cause i can only see the Screen being stuck on SE logo .. the led .. is dead .. What now .. ? the new home of my phone is goin 2 be " trash " .. ?
PLEASE GUYS ! AN ADVANCED HELP !! PLEASE !!
I know that you really doesnt want this advice...
Try bin4rys flashtool 'terminal' edition
I know by my own experience that with Gui it sometimes fails to discover the phone. I tried with terminal one, and i succeded.
Take it easy, read, think, read, think
Sent from my U20i using XDA App
Use PC Companion to repair your device.
Are you sure your phone is completely shut down when using flashtool? Coz back then, my phone kept on booting as long as the battery is inseeted. So I took the battery out, prepare the flashtool within one click to begin and wit sleight of hand I put on the battery, connect the usb and press the back button and voila, it detected my phone and start the flashing process
Sent from my U20i using XDA App
HerrKuk said:
I know that you really doesnt want this advice...
Try bin4rys flashtool 'terminal' edition
I know by my own experience that with Gui it sometimes fails to discover the phone. I tried with terminal one, and i succeded.
Take it easy, read, think, read, think
Sent from my U20i using XDA App
Click to expand...
Click to collapse
And What the **** is That LOL .. ?
Tehouster said:
Use PC Companion to repair your device.
Click to expand...
Click to collapse
How .. ?? =S
Sira. said:
And What the **** is That LOL .. ?
Click to expand...
Click to collapse
velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
Found in another thread.. search and you will find
Sent from my U20i using XDA App
HerrKuk said:
Found in another thread.. search and you will find
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Well i dunno what the hell u r talkin about .. Anyway i sent u a msg .. Hope u read it xD .. and what is the application urtalkin about ?? can u gimme some links for all of that ? xD
Sira. said:
Am sitting here breathless .. desperate no clue on what 2 do ! .. They say .. there's a problem with the battery other's say use SEUS .. another people say .. Try flash tool .. bin4ry's ... i really need an advanced help here guys ! SEUS no longer has the Reinstall for the software thing .. not anymore yes .. and Flashtools .. does no detect my phone .. the only alive thing in my phone .. is that Red LED .. works when i press on the power button .. it lights up 3 times .. and the phone turns on only when i connect it 2 the charger .. i dunno if its charging or not .. cause i can only see the Screen being stuck on SE logo .. the led .. is dead .. What now .. ? the new home of my phone is goin 2 be " trash " .. ?
PLEASE GUYS ! AN ADVANCED HELP !! PLEASE !!
Click to expand...
Click to collapse
just tell me you have mini or mini pro.
as you said your phone blinks red led three times it indicates your battery is not charged dont worry even if you put it whole night it wont because i got similar problem.
i will give you instructions after you tell me which phone do you have mini or mini pro
Edit: Se my next post in your thread
First, you need charge your phone! But you need do this with charge adapter (Not USB cable + PC), later try to flash you phone with flasher or SEUS.
If you phone is no start or booted - pressed Home+back+Power - this rebooted tour device !
kobzarcheg said:
First, you need charge your phone! But you need do this with charge adapter (Not USB cable + PC), later try to flash you phone with flasher or SEUS.
If you phone is no start or booted - pressed Home+back+Power - this rebooted tour device !
Click to expand...
Click to collapse
true
just forget every method, start seus when it asks you to connect phone
just connect your phone without pressing back key, phone will boot
now press home+back+power keys as kobzarcheg said
your phone will vibrate and turn off with green light LED on
release power and home key but not back key
your phone will be detected and seus will either download the updated firmware or repair your phone
If you still haven't fixed your phone yet..
1) You need to charge your phone with the wall charger (red light on phone generally means battery level low) you can't charge it from your computer it needs to be the wall charger.
2) If you have already tried the newer version of Flashtool and had no luck then try this one.. (it is the original one I still use because it never fails, all thanks to Bin4ry for this tool.. I hope he doesn't mind me sharing it if it help you out)
Flashtool2.1(non GUI)
3) download, unzip and copy the firmware .sin files into the Firmware folder in flashtool (should be 8 or 9 .sin files) make sure you download the right ones for your phone! (mini-E10 pro-U20) from here..
mini
mini pro
4) run the flashtool.bat file and follow on screen instructions.
When it asks you to connect phone in "Flashmode" I suggest pressing the power button and middle button for 3 sec (to re-boot your phone if its a mini or if its a pro then take the battery out and put it back in again) then hold down the back <-- button while you plug the usb cable into the phone.. it should detect the phone and start flashing.
If it doesn't work the first time unplug the phone and try again!
good luck
Kiwi
ahub1988 said:
just tell me you have mini or mini pro.
as you said your phone blinks red led three times it indicates your battery is not charged dont worry even if you put it whole night it wont because i got similar problem.
i will give you instructions after you tell me which phone do you have mini or mini pro
Edit: Se my next post in your thread
Click to expand...
Click to collapse
Oooooooooooooh thanks man ! i know it wont charge up ... my phone is X10 mini ... u can send me the instructions as a MSG .. would be better =X ... Thank ya MAN ..
ahub1988 said:
true
just forget every method, start seus when it asks you to connect phone
just connect your phone without pressing back key, phone will boot
now press home+back+power keys as kobzarcheg said
your phone will vibrate and turn off with green light LED on
release power and home key but not back key
your phone will be detected and seus will either download the updated firmware or repair your phone
Click to expand...
Click to collapse
SEUS no longer has the Update or repair option .. =/
kiwiBratwurst said:
If you still haven't fixed your phone yet..
1) You need to charge your phone with the wall charger (red light on phone generally means battery level low) you can't charge it from your computer it needs to be the wall charger.
2) If you have already tried the newer version of Flashtool and had no luck then try this one.. (it is the original one I still use because it never fails, all thanks to Bin4ry for this tool.. I hope he doesn't mind me sharing it if it help you out)
Flashtool2.1(non GUI)
3) download, unzip and copy the firmware .sin files into the Firmware folder in flashtool (should be 8 or 9 .sin files) make sure you download the right ones for your phone! (mini-E10 pro-U20) from here..
mini
mini pro
4) run the flashtool.bat file and follow on screen instructions.
When it asks you to connect phone in "Flashmode" I suggest pressing the power button and middle button for 3 sec (to re-boot your phone if its a mini or if its a pro then take the battery out and put it back in again) then hold down the back <-- button while you plug the usb cable into the phone.. it should detect the phone and start flashing.
If it doesn't work the first time unplug the phone and try again!
good luck
Kiwi
Click to expand...
Click to collapse
Ok kiwi ill try 2 do ma best .. though i dunno if its charging or not .. cause i connect the phone 2 the AC charger --> Wall one ... no lights go up .. the phone just turns on .. and stop at the SE logo .. (( I DUNNO IF IT'S CHARGING OR NOT )) .. besides i Cannot take the battery off cause its under some kind of cover that need's 2 be unScrewed .. which is somethin i dont want 4 ma phone .. if i had 2 .. i will =/ ... am downloading the Flasher ATM .. And thanks Again ..
AfterTrying .. it did not detect the phone ... i tried like 20 times .. i followed ur instruction .. except for taking off the battery .. Cause i dont have the Right tools .. u know how the x10 mini is .. i think .. the battery is behind a Shell . that need's 2 be unscrewed
Sira. said:
Ok kiwi ill try 2 do ma best .. though i dunno if its charging or not .. cause i connect the phone 2 the AC charger --> Wall one ... no lights go up .. the phone just turns on .. and stop at the SE logo .. (( I DUNNO IF IT'S CHARGING OR NOT )) .. besides i Cannot take the battery off cause its under some kind of cover that need's 2 be unScrewed .. which is somethin i dont want 4 ma phone .. if i had 2 .. i will =/ ... am downloading the Flasher ATM .. And thanks Again ..
AfterTrying .. it did not detect the phone ... i tried like 20 times .. i followed ur instruction .. except for taking off the battery .. Cause i dont have the Right tools .. u know how the x10 mini is .. i think .. the battery is behind a Shell . that need's 2 be unscrewed
Click to expand...
Click to collapse
Yep, I have a mini so I know you can't remove the battery
I would leave the phone plugged into the charger for a few hours.. (even if you don't know if its charging)
with a mini, pressing the power button and the middle button at the same time and holding them down for 3-4 sec is like taking the battery out and putting it back in.. when Flashtool asks you to connect the phone then you just need to plug the phone in while holding down the back key (the phone should be off (or between reboots) for you to do this)
(also had you ever plugged the phone in and ran pc suite or SEUS before this problem.. I wonder if you have the drivers for your phone installed on your computer? if it had worked for PC suite or SEUS in the past it should be fine.
Kiwi
kiwiBratwurst said:
Yep, I have a mini so I know you can't remove the battery
I would leave the phone plugged into the charger for a few hours.. (even if you don't know if its charging)
with a mini, pressing the power button and the middle button at the same time and holding them down for 3-4 sec is like taking the battery out and putting it back in.. when Flashtool asks you to connect the phone then you just need to plug the phone in while holding down the back key (the phone should be off (or between reboots) for you to do this)
(also had you ever plugged the phone in and ran pc suite or SEUS before this problem.. I wonder if you have the drivers for your phone installed on your computer? if it had worked for PC suite or SEUS in the past it should be fine.
Kiwi
Click to expand...
Click to collapse
My friend Kiwi .. Thanks for help .. and it's an honor having the same phone xD ..And ya .. i heard it 1st from u .. =X .. though i know how 2 press the power + home button xD .. but i didnt know that it does other things than Turning the phone off =| .. anyway xD .. Kiwi .. it would be Great if u added me on msn .. i can use some of ur skills .. Would ya like 2 add me ?
Hey guys plz help me fast i was using mik's cm7 6.5.8 yesterday at night i switched off my phone now today at the morning when i tried to switch it on it showed 0% charge then shut down now when i try to charge it its stuck on the grey lg logo after leaving it for an hour also it is not working even after tryting to reboot its happening.when i booted it into emergency mode it was booting but my phone cannot b detected by my pc to use kdz plz guys help.....
after u plug the charger, switch on and go to custom recovery, leave it for half hour and then reboot
you didn't understood when i plug the charger it turns itself on rather than charging and i can't boot into recovery either only emergency mode can be done
Devil_Dude said:
you didn't understood when i plug the charger it turns itself on rather than charging and i can't boot into recovery either only emergency mode can be done
Click to expand...
Click to collapse
I understood your problem, the fastest way is using LGMDP ( the Russian's LG P500 tool help us to flash baseband ) flash the baseband that your phone is having. EX:
Now your phone have the old baseband , so you just go to LGMDP , choose your phone , and then flash the old baseband .... It should be get out of emergency mode. If the LGMDP Freeze when it's flashing the baseband , you have to use the Task Manager on Windows ( Ctrl + Alt + Delete ) , it should show up the task manager or a board that have the "start task manager" line and you have to click that line. After open the task manager on windows, see on the top, click on the "Processes" Tab , and then find the "LGMDP.exe" and then click on "End Process" . And start LGMDP again
Maybe you should return to the default 2.3.3 and stop using experimental os-es!
@thachtunganh my phone is not detected by pc even after i flashed cm7(this is bull$#!T)
@s0v3r3ign69 i am never gonna do dat...
Hope this might work for u:
1.plug in charger to ur phone without switching plug on.
2.keep vol down and home butoon pressed and then turn on charger(with buttons pressed).
3.Then u should enter into recovery mode.
4.then do fresh install of this rom.
ashishv said:
Hope this might work for u:
1.plug in charger to ur phone without switching plug on.
2.keep vol down and home butoon pressed and then turn on charger(with buttons pressed).
3.Then u should enter into recovery mode.
4.then do fresh install of this rom.
Click to expand...
Click to collapse
nope its not working yet...
but now i can say i have charged the battery by some exteranal source now the problem is that my phone is still not booting up(Its stays on the first Grey LG Logo) neither its detected by my pc in emergency mode....
Devil_Dude said:
nope its not working yet...
but now i can say i have charged the battery by some exteranal source now the problem is that my phone is still not booting up(Its stays on the first Grey LG Logo) neither its detected by my pc in emergency mode....
Click to expand...
Click to collapse
cant u enter recovery mode???
i can but my phone is not detected by my pc...
In recovery,enter mass storage mode and ur phone will be detected.Then copy zip file of rom and flash it.
I dun know if this helps i had mine stuck in emergency mode no matter what i did when i power up after the lg logo it goes into emergency mode n also not recognise by pc so i use the kdz updater and instead of DIAG i set it in emergency and i updated stock rom and it works of course i rooted it straight away ...hope u had yr problem solved by the time u read this cheers
Sent from my LG-P500 using xda premium
Sorry i forgpt remove yr battery when u connect to pc and just before the kdz finishes insert yr battery done
Sent from my LG-P500 using xda premium
Devil_Dude said:
i can but my phone is not detected by my pc...
Click to expand...
Click to collapse
If you can boot into custom recovery then y dont you flash mik's rom 6.5.8 again over the present one without erasing anything, try it your problem might be solved
i can boot into only emergency and there is some problem with my phone's usb port whenever i flash any unofficial rom its not detected by my pc anymore....
and guys if my phone was ever detected by my pc i could have used kdz by now cause i have flashed more than 30 times using that and 4 times to unbrick my phone yet....
ashishv said:
In recovery,enter mass storage mode and ur phone will be detected.Then copy zip file of rom and flash it.
Click to expand...
Click to collapse
In recovery go to mounts and storage and in the select mount USB and boom ur phone will be detected in PC now u can reflash the rom after copying the file to sd..remove to wipe everything befpre u do that !!enjoy! N press thanks..
Sent from my LG-P500 using xda premium
Devil_Dude said:
@thachtunganh my phone is not detected by pc even after i flashed cm7(this is bull$#!T)
@s0v3r3ign69 i am never gonna do dat...
Click to expand...
Click to collapse
WTF? ..... i think your PC have the problems.... check the driver in device manager....
---------- Post added at 02:56 PM ---------- Previous post was at 02:44 PM ----------
androidusero1p500 said:
In recovery go to mounts and storage and in the select mount USB and boom ur phone will be detected in PC now u can reflash the rom after copying the file to sd..remove to wipe everything befpre u do that !!enjoy! N press thanks..
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
What are you talkinh about? the PC can not detected his phone , it mean this problem is causing by the driver on PC or his phone... and what can mount usb can do, the option mounts usb mass storage doesn't help anything , it just can like mount usb mass storage when your phone is on....
i have reisntalled all the driver again but its not wokring yet buti think its time to goto the F**king service center **** this i cannot even flash a official rom
dude
you can enter into emergency mode right??
so restart your phone(press power button+volume up+back button and enter into emergency mode)
then in kdz instead of DIAG select Emergency/CS_Emergency
and try
it should work!!
EDIT:going through the above posts looks like your phone's USB port isnt working
maybe its better you give the phone to LG for repair :/
thachtunganh said:
and what can mount usb can do, the option mounts usb mass storage doesn't help anything , it just can like mount usb mass storage when your phone is on....
Click to expand...
Click to collapse
What do u mean,his battery is charged man.
im using samsung galaxy 5-i5503
was degrading my phne to 2.2 froyo...
by mistakely i used my bros files..(he uses galaxy3)
i flashed my phone with galaxy 3's firmware..
nw ma phone nt even starting...nothng is hapn..:'(
m not even able to start it...nor evn go to download mode..please help me..!!
1. remove the battery for about 10-15 minutes
2 insert the battery back and try to turn on download mode
if works flash your phone with odin again but this time with the correct files
hmmm let me try
if it works then ty o please suggest other ways
and i forgot to say that you need to remove micro sd and sim card
bro thanx fuh reply :'(
bt nthng hapnd :'(
is there any other way ? like adb shell thru we can ? :'(
Check Galaxy 3 partition structure and compare whit I5500 partition structure. If arm11boot is damaged phone is bricked and there is nothing you can do about it. In that case I'm sorry and take it back to service center.
I did a lil reaserch. You can fix on your own. im sorry.... Take it to service center. A proof:
Apollo ops:
0,boot
1,Sbl
2,logo
3,efs
4,zImage
5,factoryfs
6,datafs
7,cache
8,
9,modem
Europa:
0,mibib
1,qcsbl
2,oemsbl
3,amss
4,arm11boot
5,boot
6,recovery
7,system
8,data
9,csc
10,
Partition 4 in Apollo is zImage, in Europa partion 4 is arm11boot. Usualy zimage is flashed so zImage replaced arm11boot. Phones have different construction and software so no turning back whitout service guys.
hmm........isnt there anyway i cn connect ma phone to pc ?
like i cn connect ma dead phone to pc ?
hey try this
1.ensure ur phone battery is charged
2.install kies
3.now connect ur phone to pc and go to control panel devices and printer and see if there is any device with samsung name.
4.if not then disconnect ur phone remove its battery
5.now without battery in ur phone connect ur phone to pc
6.now while holding vol. down,home and power button insert the battery it will install some drivers
7.ensure u press all the buttons at same time otherwise it will not work
8 if above buttons deos not work remove battery again and hold down home and vol, up together and insert the battery again this should work
9.now as usual open odin and flash
odin should now have detected ur phone
ensure that kies is closed during flash.
ddeswal3 said:
hey try this
1.ensure ur phone battery is charged
2.install kies
3.now connect ur phone to pc and go to control panel devices and printer and see if there is any device with samsung name.
4.if not then disconnect ur phone remove its battery
5.now without battery in ur phone connect ur phone to pc
6.now while holding vol. down,home and power button insert the battery it will install some drivers
7.ensure u press all the buttons at same time otherwise it will not work
8 if above buttons deos not work remove battery again and hold down home and vol, up together and insert the battery again this should work
9.now as usual open odin and flash
odin should now have detected ur phone
ensure that kies is closed during flash.
Click to expand...
Click to collapse
bro i dnt gt 8. point ill u please xplain ?
If you flash your phone with a recovery done for another phone there is nothing you could do but bring it to a Samsung center, where they will repair it.
It's not my personal experience, but I read - here and elsewhere - that all peoples which had same problem was not able to solve it..
Next time you have to be much more careful!!
any idea how much they ill charge ?
by 8th poinrt i mean to say that if the 3 button combination (vol down+home+power) does not work for u as it did not work for some people try (vol up + home) the 2 button combo also it requires patience as it is difficult to hold all the buttons and at the same time while holding insert the battery, u can take help of any one as it will only work if done correctly
best of luck
rahul_poo6711 said:
any idea how much they ill charge ?
Click to expand...
Click to collapse
Did you mean how much will you pay for?
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
Hey guy, i was running on my sgs2 I9100XXKPA_I9100OXAKPA_OXA .. I dont know if I was mistaken when filling in the space Odin .. Now my device can not be in charge, could not be detected by the pc, and the screen is black(no symbol n icon) .. when I press the button on my device does not respond .. what happened to my device and what should I do .. helpppppp me please guys ... now I'm under stress ...
weylls said:
Hey guy, i was running on my sgs2 I9100XXKPA_I9100OXAKPA_OXA .. I dont know if I was mistaken when filling in the space Odin .. Now my device can not be in charge, could not be detected by the pc, and the screen is black(no symbol n icon) .. when I press the button on my device does not respond .. what happened to my device and what should I do .. helpppppp me please guys ... now I'm under stress ...
Click to expand...
Click to collapse
are you trying to root your phone
yeah I'm trying to root a device .. but now it has not work and a black screen .. I tried to on but does not work ..
Try and get into download mode. Make sure the phone is switched off (pull the battery out for a minute then put it back in). Then press the volume down & home buttons & keep holding them down. At the same time press the power button until you boot into download mode.
If you can get into download mode, connect your phone to PC via USB & start Odin. Check Windoze Task Manager & make sure Kies isn't open. If it is, close Kies & it's associated processes. Now, if Odin recognises your phone & you have COM highlighted in yellow, you should be able to fix it.
At this stage, download stock firmware from Samfirmware if you haven't already. From there, flash the stock firmware in Odin and follow whatever instructions Samfirmware have for flashing firmware downloaded from their site (important).
Now...If you can't get into download mode, you can try a jig. If the jig doesn't work, you'll either need to get a JTAG repair done, or send it in to Samsung/your carrier for repair.
weylls said:
Hey guy, i was running on my sgs2 I9100XXKPA_I9100OXAKPA_OXA .. I dont know if I was mistaken when filling in the space Odin .. Now my device can not be in charge, could not be detected by the pc, and the screen is black(no symbol n icon) .. when I press the button on my device does not respond .. what happened to my device and what should I do .. helpppppp me please guys ... now I'm under stress ...
Click to expand...
Click to collapse
Ok. What file/s were you using in Odin and what did you put where?
I think I've heard of similar things happen before when flashing galaxy s firmware on an S2.
As MB said, your only chance is to get download mode working before having to send it off.
Sent from my GT-I9100T
thanks 4 advices..
I have sent to the repairer .. he said I was burning device ic .. is it reasonable?
That does not make sense .
Burning device what with blowtorch .
jje
thanks
on the night of the incident I have been waiting a long time to flash, and the triangle symbol appears by that I have been pulling out the usb ,after it displayed the symbol + triangle + pc device .. after that I can return to the download mode .. but after the inclusion of Odin file, device keep does not work, what the causes and what is his solution? thanks 4 help
weylls said:
,after it displayed the symbol + triangle + pc device ..
Click to expand...
Click to collapse
This is a forced download mode. Essentially means you have to flash a working firmware before the phone will boot.
huhhhh...
I think to send the device to Samsung, is he able to find damage caused by my error?
MistahBungle said:
Try and get into download mode. Make sure the phone is switched off (pull the battery out for a minute then put it back in). Then press the volume down & home buttons & keep holding them down. At the same time press the power button until you boot into download mode.
If you can get into download mode, connect your phone to PC via USB & start Odin. Check Windoze Task Manager & make sure Kies isn't open. If it is, close Kies & it's associated processes. Now, if Odin recognises your phone & you have COM highlighted in yellow, you should be able to fix it.
At this stage, download stock firmware from Samfirmware if you haven't already. From there, flash the stock firmware in Odin and follow whatever instructions Samfirmware have for flashing firmware downloaded from their site (important).
Now...If you can't get into download mode, you can try a jig. If the jig doesn't work, you'll either need to get a JTAG repair done, or send it in to Samsung/your carrier for repair.
Click to expand...
Click to collapse
I have tried but failed ...
I'm not sure what I did but now the S5830i will not go past the initial Samsung splash screen. I can't get into recovery or download modes using the usual keys.
I managed to get it into emergency download mode by holding down volume up + volume down + power and then putting the battery in, but the PC doesn't recognise the device (drivers are installed) and therefore ODIN doesn't pick it up either.
Suggestions please?
Man install new drivers and odin..
And see if it works...
If I Helped U Hit Thanx ::
nikhil_dabral_29 said:
Man install new drivers and odin..
And see if it works...
If I Helped U Hit Thanx ::
Click to expand...
Click to collapse
I installed the latest Kies. That didn't work so I removed that and installed the latest Samsung Mobile drivers. That didn't work either
Bro if it is going in recovery mode...
Thn go in other pc..
And try...
There can be some problem with ur pc usb port..
If I Helped U Hit Thanx
hshah said:
I'm not sure what I did but now the S5830i will not go past the initial Samsung splash screen. I can't get into recovery or download modes using the usual keys.
I managed to get it into emergency download mode by holding down volume up + volume down + power and then putting the battery in, but the PC doesn't recognise the device (drivers are installed) and therefore ODIN doesn't pick it up either.
Suggestions please?
Click to expand...
Click to collapse
1)hold volume(up+down), home and power key for download mode..(do this twice or thrice)
2)remove your baterry
3)then connect to pc through usb without battery
4)now the download mode screen will appear in mobile.
5)then insert your battery and flash...
i hope it will work beacause i did the same thing when i got stuck at samsung logo
aravindraj said:
1)hold volume(up+down), home and power key for download mode..(do this twice or thrice)
2)remove your baterry
3)then connect to pc through usb without battery
4)now the download mode screen will appear in mobile.
5)then insert your battery and flash...
i hope it will work beacause i did the same thing when i got stuck at samsung logo
Click to expand...
Click to collapse
That did the trick. It didn't show up the first time but then I repeated the steps 3-4 more times and it appeared in ODIN an I managed to flash the stock PDA
Kies is 5h1t
Bro! uninstall u kies, install 25830i drivers again.. if u have kies, ur pc doesn't see ur phone
hshah said:
I installed the latest Kies. That didn't work so I removed that and installed the latest Samsung Mobile drivers. That didn't work either
Click to expand...
Click to collapse
S5830i - not recorgnised - win 7 SOLVED!
Hi All,
Just had a horrible day after I killed my little Ace flashing a CM ROM (my fault). Knew I needed to flash stock via Odin....
Went like this - collect all the stock rom files etc from various XDA forums. Thanks for those!
Go into download, open Odin.
"Device has malfunctioned, Windows does not recognise it".
I have 2 laptops running Win 10. and PC running Win 7. I have maybe 7 USB leads.
Went through every computer, every port, reinstalled all drivers every time, no joy. Poor little Ace stuck in download mode waiting. Nothing recognised it.
In some flash of inspiration I took phone OUT of download mode, wiped data, wiped cache and told it to reboot - this was stock recovery too, had fried CWM. It got stuck in it's Galaxy Ace screen as it had when it died....I plugged it in....and holy moly, Windows now recognised. The drivers finally installed successfully and Odin agreed with WIndows by recognising it in the COM box.
Yay me!
Thought I'd post since I've been fighting this all day and maybe it will help somebody else avoid that.
Cheers and good luck!