guys i just root my X10 mini and i need upgrading android to 2.3...does need to create ROM or just download android 2.3 file install it???i need your respone and a helping hand...thanks
Please use the search function the next time. For your convenience Click Here
And try this custom ROM for starters. It doesn't require you to unlock boot loader and install a custom kernel.
and when you know how to use the search function then I know for sure you can manage to unlock your boot loader and can flash a custom ROM
lol. they will so kill you for this question. It's forbidden to be a noob in these forums.
Here are the steps you must follow in "search" terms:
1. Root (obviously you already did).
2. Unlock bootloader. (google the hell out of it, search these forums. To install a new rom you need to install a new kernel. For a new kernel you need to unlock the bootloader. Search "How to Unlock the bootloader"). You will need your PC.
3. Flash a new Kernel and Install CWM recovery. Generally just flashing the kernel takes care of the CWM installation. (It's some kind of android bios you must install first thing after having unlocked the bootloader. Check "flashtools" and "how to flash a kernel" guides). You'll need your PC.
4. Flash the ROM. It's the easiest part. It's done by hard reseting the phone. check "How to flash a ROM".
gl dude.
There's nothing wrong with being noobish. Everyone is a noob at some point. This is my first Android anything and I knew absolutely nothing before I came here: "Root? Custom rom? ClockworkMod Recovery? What the hell does any of it mean?!"
But there's a fine line between asking noob questions and asking noob questions without doing any research. But hey..at least the OP was polite.
Ticklefish said:
There's nothing wrong with being noobish. Everyone is a noob at some point. This is my first Android anything and I knew absolutely nothing before I came here: "Root? Custom rom? ClockworkMod Recovery? What the hell does any of it mean?!"
But there's a fine line between asking noob questions and asking noob questions without doing any research. But hey..at least the OP was polite.
Click to expand...
Click to collapse
the line would be drawn like n00b vs n3wbi3. n00b - as what my sig says and n3wbi3 - doesn't ask unless there's a prob or question that needs to be clarified. i was once a n00b but know where to start and that is hitting the start button.
How does i upgrade my xperia x10 mini to 2.3 android
Dear sir,
i want to upgrade to my xperia x10 mini to android 2.3.
presenently i have 2.1 in my phone.
am already done rooting.
i have total size of my sd card 8g.b. in that i done second partition in EXT2 2g.b.
if i upgrade to 2.3, which memory is using for as internal memory?
plz tell about how i upgrade to 2.3, with step by step and screen shots. plzzzzzzzzz sirr
Well,i think there was a thread on that somewhere dont rember where though anyway,,
First go to the x10 mini pro android devolpment forums and download cwm recovery installer after that its pretty simple for android 2:3 I suggest minicm7 if u go to its post it will tell you all steps and to open cwm u click back button while ur phone opening
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
arey bhai itna chila kyon raha hai.....
aaram se bol na
rajubehappy said:
plz tell about how i upgrade to 2.3, with step by step and screen shots. plzzzzzzzzz sirr
Click to expand...
Click to collapse
that would be time consuming to post step by step with screenshots. better do it yourself first and ask the community if you ran into a prob. that way youll learn. and please use the search function. there are lots of guide that you can use you just have to look for it. remember no pain no gain.
Dear sir,
I already done as ur steps but i get many problems.
After unlock bootloader i not get network signal, but i continue ur procedure and done flash and open in CWM clockmode i install Update.zip. and after switch off and on. but its not working. my phone shows in WHITE LETTERS "Sony Ericsson" its not boot and not off.
plz sir give me solution plzzzzzzzzzzzzzzzzzzzzz
as i see you have a simlock first unlock your sim and then unlock bootloader install kernel and then gingerbread
demoniacs said:
And try this custom ROM for starters. It doesn't require you to unlock boot loader and install a custom kernel.
Click to expand...
Click to collapse
Doing your research... Just about every current iteration of GB-Roms for the X10Mini requires a custom kernel, The installation instructions for the ROM you linked to clearly states to unlock the bootloader and install nAa-08 kernel.
If you want to point people to ROMS that run on stock kernel, stick to froyo/CM6.
plz reply me
plz answer my problem
First of all, you lost your network-capability when you unlocked your bootloader, so i hope you made a backup of your orignal firmware. Restore that and then relock the bootloader, your network capability should hopefully come back
You can't run any Gingerbread roms if you're on the X10Mini with a locked bootloader, you'll have to stick with older Froyo (2.2) Roms, just make sure the ROM you choose does not require a custom kernel. The older ones probably have to be installed with Xrecovery too, instead of CWM, use flashtool to get XRecovery onto your phone.
rajubehappy said:
Dear sir,
I already done as ur steps but i get many problems.
After unlock bootloader i not get network signal, but i continue ur procedure and done flash and open in CWM clockmode i install Update.zip. and after switch off and on. but its not working. my phone shows in WHITE LETTERS "Sony Ericsson" its not boot and not off.
plz sir give me solution plzzzzzzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
It isnt SIM lock, it is SEMC SIMLOCK CERTFICATE. Try S1Tool what it says.
I have the same problem and I solve like in this tread http://forum.xda-developers.com/showthread.php?t=1254225
mightyoutlaw said:
It isnt SIM lock, it is SEMC SIMLOCK CERTFICATE. Try S1Tool what it says.
I have the same problem and I solve like in this tread http://forum.xda-developers.com/showthread.php?t=1254225
Click to expand...
Click to collapse
No need to shout, not every x10 mini or x10mini pro comes with a semc-simlock certificate, if your phone is simlocked by your provider, s1tool gives you simlock-certificate not recognised.
If you unlock the bootloader on such a phone, it is most likely it will disable your radio-capability.
So everytime someone unlocks their bootloader and gets no service anymore, relocking is the only option, and then sim-unlock their phone using Omnius, or (the safest way) with an EMMA/IMEI code from their network-provider.
After that you can unlock the bootloader safely.
problem occured in upgrading
dear sir i already locked my boot loader. but i cant upgrade firmware or flash through sony companion and SEUS. how can i upgrade or restore my firmware. its shown only "Sony Ericsson" in WHITE LETTERS. plz resolve my problem.
its occured any error in flashing? any different kernal is there?
I am on custom ROM right now, phone is rooted though and just unlocked the bootloader a couple days back. I was wondering, if I flashed the nAa-11 kernel, will I still be able to use stock ROM on it until I install some GB ROM? Or do I have to flash the GB ROM right after flashing the nAa-11 kernel for the phone to work?
Just for the record, I like doing one thing at a time then checking if phone is fully stable before moving to the next step... Makes me TOO nervous
The ROM's are all compiled against a particular kernel, so stock rom won't work on the nAa-kernel, and most GB-roms won't work on the stock kernel.
You want to flash the nAa-11 kernel, do a reboot, and press the back-button several times until you get into CWM That's as sure as you can be that everything is stable at that point.
Then you can do the usual steps for installing the ROM, (Wipe data, cache, etc., install from sd-card)
If you forgot to put the ROM on your sd-card you can connect your phone through CWM in the mounts and storage section, mount usb-storage) and then copy the ROM to your phone.
Related
Having a few issues. Yesterday while using the twitter app, my Xperia X10 froze. I waited for like 5 minutes but it was still stuck so i took out the battery and put it back in. I restarted the phone and then my Wifi stopped working. After alot of reboots, wifi started to pick my wifi connection but then it would connect and give me limited connectivity. I did a few more reboots and then i think i went into xrecovery and by mistake recovered my phone to some earlier date which completely messed up my phone. Now i cant access my ROM i can only use xrecovery. If i try to load past the xrecovery, it shows the Sony Ericsson screen and then it goes blank, The notification light shows a white signal and then it restarts.. Then again it shows the SE Screen and again the white notification light and again restart.. this keeps on happening.
Anyway i decided it was time to install a new rom and it would solve my problems.. I put my phone in Xrecovery and tried to mount the SDcard but the memory card just wont show up on my computer for some reason..
Anyway then i took a card reader and put the roms on the root of my card and then put my card back into my phone.. After that i tried to install the custom zip but it gives me the error E: Cant mount /sdcard (device or resource busy)
WTF?
Can someone help me im clueless !!!
Okey i flashed the 2.1 Rom now.. Do i need to root my phone again? Do i need to install xrecovery again? :S
Hi if you flashed the stock 2.1 ROM then yes you will have to root the phone again and install xrecovery. I reckon you should update to 2.3.3 first using either flashtool, PC companion or SEUS which ever you prefer. Then root using flashtool 0.4.2 and install xrecovery using flashtool as well. Good luck hope this helps.
What rom do you use when phone froze? And why you flash first 2,1 rom? You must first flash 2.3, then root, install xrecovery, (unlock bootloaders if you want) and thats all
I was using 2.3.3 Wolfbreak i think ! Not sure.. Updated a 2-3 months back.
I flashed 2.1 because i read somewhere thats what people did when they got the mount sdcard problem in xrecovery.
Sorry if i sound like a noob but whats a bootloader and why would i unlock it?
Anyway im downloading 2.3.3 first and will then install xrecovery. I want to install one of the MIUI ROM's.. Which one should i install? Which one is the most stable and has the most features?
Unlocked bootloaders just allows change boot logo I think) And for miui I'd suggest oddie or a1exander roms, they are stable and everthing work
Sorry for bad english
Thanks !!!
Installing 2.3.3 right now. Will let you guys know if there's any problem.. Thanks again
Before you install xrecovery don't forget to root first I would use flashtool 0.4.2 for this check out the link http://forum.xda-developers.com/showthread.php?t=920746 The bootloader as i understand it is basically the very start of the bootup loads the kernel then the ROM loads. The white Sony Ericsson logo when you fist power on the phone is generated by the bootloader. A couple of reasons to unlock the bootloader are to load custom kernels faster an they are more stable this way instead of the bootloader bypass method. Some ROM's e.g Cyanogenmod need an unlocked bootloader I believe. BEWARE I heard of people bricking there phone during the unlock process i would do plenty of research before unlocking. I would have a read of these threads before unlocking your bootloader http://forum.xda-developers.com/showthread.php?t=1254087 http://forum.xda-developers.com/showthread.php?t=1253277&highlight=unlock+bootloader+proper+method . I still have not been game enough to unlock my bootloader yet phone still under warranty thought. Good luck nothing wrong with being a noob we all start some where I am a noob too just with lots of reading and experimentation behind me.
Thanks !
Okey well im going for this:
1. Flash 2.3.3 Rom using flashtool
2. Install xrecovery using flash tool
3. Install Alexander's miui by using custom zip in xrecovery (right?)
That should be it? Do i really need to unlock boot loader? Dont really want to mess anything up
Firts root and then install xrecovery Don't install Alexander miui version 11, wait tomorow. 11v have many bugs:/ Don't afraid nulock bootloaders, just read instructions, not rush and everything be okay
Forry for bad english.
2.3.3 installed.
Trying to root it, But flashtool's root button is greyed out ?
Installl drivers from flashtool folder?
Done but still greyed out.. Also enabled USB debugging and unknown applications in the phone
Here http://forum.xda-developers.com/showthread.php?t=1196808 read instructions and be happy You must first install kernel I think:/
How do i install kernel ?
You don't need to install a kernel yet you have the stock kernel installed already from the 2.3.3 install. Have you put the phone in flash mode before you try and root it. If not put it in flash mode then try and root. Note the op posted is using the old version of flashtool so it will look a bit different.
In that post all write just read You know how put phone in flash mode?
Nope.. The root option in flashtool is just greyed out no matter if im in flash mode or not.
My kernel is 2.6.29-00054-g5f01537 [email protected] #1
Android: 2.3.3
Baseband: 2.1.71
Buildnumber: 3.0.1.G.0.75
I hope i flashed the correct 2.3.3 rom? I had a 2.3.3 rom by the name of x10_2.3_aro.ftf I flashed that.
Don't understand. Just follow intructions in my link. No matter that flashtool version old, it makes their job.
Sorry for bad english.
OK I think you need to go back to basics download Sony PC companion and update or repair your firmware from there that way you know you had the right version of firmware for your phone. Firmware can be carrier dependant. Once this is done then try to root using flashtool
Sent from my X10i using XDA App
Hi everybody and merry christmas!!
So i've a problem with my mini pro sk17. It was unlocked, rooted and with latest firmware 0.58.
I've tried to install hybrid rom v4.5, so for that, i put cwm on my phone. I entered it one time (for installaing the rom) and since, no way to get it back! I 've read the thread about cwm installed, and there is one post wich talk about this issue (missed it of course before flashing!!!!gggrrrrrr): now my phone stay at sony ericsson logo.
Flashtool doesn't work on my pc (java problem, but can't resolve it)
I can put my phone in fastboot mode, but when i try to install another recovery, it says that i'm not root, but yes i am.
Nothing else works. Is there a way to erase completely the phone and push back stock rom or something like that?
Thanks for help.
Yoh
yohannsiche said:
Hi everybody and merry christmas!!
So i've a problem with my mini pro sk17. It was unlocked, rooted and with latest firmware 0.58.
I've tried to install hybrid rom v4.5, so for that, i put cwm on my phone. I entered it one time (for installaing the rom) and since, no way to get it back! I 've read the thread about cwm installed, and there is one post wich talk about this issue (missed it of course before flashing!!!!gggrrrrrr): now my phone stay at sony ericsson logo.
Flashtool doesn't work on my pc (java problem, but can't resolve it)
I can put my phone in fastboot mode, but when i try to install another recovery, it says that i'm not root, but yes i am.
Nothing else works. Is there a way to erase completely the phone and push back stock rom or something like that?
Thanks for help.
Yoh
Click to expand...
Click to collapse
First of all some questions.
How did you install CWM?
What version of CWM did you run?
Is it nAa's recovery?
I think that your recovery is not able to install custom roms and that it has been deleted during the installation of hybrom.
To install a fully functional CWM and to be able to flash custom roms,you will need to install a custom kernel first, that contains CWM.This can be done only by using fastboot.So you better try and make it work...
Hi, thanks for the reply,
the cwm i've installed was with SE extrem tweak installer found here: http://forum.xda-developers.com/showthread.php?t=1346190
but i don't know wich version it was.
Yes i've already tried with flasboot, but the problem is that, when i push the kernel, it says that i'm not root!!
Is there a way to get root with fastboot or adb? cause superone cliq or doomlord script root don't work until my phone is not fully started.
I get adb working some times, but i'm not sure i can do something with it.
Bye
yohannsiche said:
Hi, thanks for the reply,
the cwm i've installed was with SE extrem tweak installer but i don't know wich version it was.
Yes i've already tried with flasboot, but the problem is that, when i push the kernel, it says that i'm not root!!
Is there a way to get root with fastboot or adb? cause superone cliq or doomlord script root don't work until my phone is not fully started.
I get adb working some times, but i'm not sure i can do something with it.
Bye
Click to expand...
Click to collapse
If fastboot says that you are not root, then your bootloader is still locked.Unlock your bootloader (visit this page:http://unlockbootloader.sonyericsson.com/instructions)
and then flash whatever kernel you want....
Yeahhhhh,
it works!!
Thanks a lot, you're a god for me!!
It is strange cause, it wasn't bootlaoder locked before, so that's why i didn't try to unlock it first. For me it was already unlocked.
So, it's great now i can't do what i want.
HAve a nice day.
Thanks again.
Yoh
Hello,
I flashed the most recent MiniCM9-3.0.2 ROM with nAa ICS kernel and followed all steps carefully. Everything works except i get no service. I can find the service network (vodafone) but i cannot connect to it. I've tried to go back to stock kernel and miniCMPro 21 and i get no service as well. Any help?
Thanks
nvm... I figured it was a bootloader-issue, but i guess since you can still find the network your gsm is still working.
In any case, you're on stock rom, try relocking your bootloader and see if you can connect to the network then (Restore-button in S1-Tool)
Hi,
I'll try to restore and see if it works.
Thanks for the help.
Hi,
I restored and reinstalled CM9 and now everything is working! Thanks
i am in exactly the same boat, just flashed same rom and same kernal and now no service, i also was under the impression if i unlocked the bootloader it unlocked phone to all networks but my virgin sim would not work either, the phone was originally on orange and my orange sim worked before i done this, what do i need to do guys just flash back stock rom, if so where can i find this, thanks!
You need to use PC Companion or SEUS from Sony Ericsson to repair your phone, and then relock your bootloader with the Restore-button in S1Tool.
There is a big difference between sim-unlocking your phone, and boot-unlocking your phone.
The first one will allow you to go on other networks, the second one will allow you to flash a custom kernel.
If you want to unlock your bootloader, follow the tutorial and make sure your simlock-certificate is compatible, otherwise, obtain an EMMA/IMEI code from your provider to get your phone on other networks. In that case you can unlock your bootloader too.
There are plenty of warnings in the bootloader-unlock tutorial to prevent you from bricking your phone, if you don't understand the options that are there, don't mess with your phone.
iv tried using the repair function of pc companion but it just says no updates available for this phone, and i cant seem to find SEUS can anyone point me in the right direction please.
think i made a mistake last night though while messing, i locked the bootloader back up, had the capital R where needed, but i had a custom rom but i had flashed back the stock kernel by mistake, now the phone sits with sony ericsson on screen and doesnt do anything else, been that way for hours now, any help really appreciated!
Hi
I had the same problem. The easy way is to put the phone back to stck and start all over again. You can find SEUS here (search on google)
update_service_setup-2.11.4.11.exe
After install it just follow the instructions. When it says no update was found just click next anyway. it will restore the phone. And then start from that point:
unlock bootloader, flash kernel and install new Rom imediatly after flash kernel. DONT LET YOU PHONE START WIHT OTHER ROM OTHERWISE IT WILL GET THE SMA PROBLEM! Put the ROM file in the SD card and after install new kernel go imediatley to CWM and install the ROM.
It should work!
cheers mate iv just downloaded it and run it, this is all that happens once i restart in flashmode, any ideas
Go to the Development section for your phone in this forum and try to find a ROM that is based on the stock rom (I think you should still be able to nstall xRecovery on your phone and enter it), then flash it just like you would other custom roms.
how can i go about installing xrecovery mate as i cant access phone the way it is, i can get it into flashmode, using the power and home button then using back quickly after i restart, iv tried flashing a custom kernel back onto it too from flashtool but it gives an error and doesnt do anything, if only i could get that kernel back on at least just to get it out of the freezing!
Open flashtool and connect your turned-on phone through usb, if it says phone connected with usb-debugging, you can use flashtool to install xrecovery and reboot into that.
SmG67 said:
Open flashtool and connect your turned-on phone through usb, if it says phone connected with usb-debugging, you can use flashtool to install xrecovery and reboot into that.
Click to expand...
Click to collapse
its saying device connected with usb debugging off, lol, what now, is there anyway to flash back to stock via flashtool as i have stock e10i 2.1 uk stock rom, if so how mate, appreciate the help! iv really jumped in at the deep end and got all confused, used to flashing samsungs!
are you on the X10Mini (E10, robyn), or X10MiniPro (U20, mimmi)?
SmG67 said:
are you on the X10Mini (E10, robyn), or X10MiniPro (U20, mimmi)?
Click to expand...
Click to collapse
its the x10 mini mate, e10 model!
ok hang on
this is caused by your x10mini conditions just flash stock with flashtoll and if you want checke it with seus it will have a repair button
Theliakos said:
this is caused by your x10mini conditions just flash stock with flashtoll and if you want checke it with seus it will have a repair button
Click to expand...
Click to collapse
im unsure of how to do that mate,do i need to put the stock rom inthe firmware folder same as i did for the kernel as i tried but it didnt show up, any guidance is much appreciated!
big-hol said:
im unsure of how to do that mate,do i need to put the stock rom inthe firmware folder same as i did for the kernel as i tried but it didnt show up, any guidance is much appreciated!
Click to expand...
Click to collapse
Check your inbox
ok guys this is what im getting when trying to flash stock rom via flash tool
Tutorial. Bootloader unlocked. Install ClockWorkMod, Kernel and ROM
Before Flashing a Custom Kernel. You have to have your bootloader unlocked.
To Unlock Bootloader follow this link http://forum.xda-developers.com/showthread.php?t=1730874
"This tutorial is for people who just bought a cell phone and want to customize, but afraid to make any modification other than Workshops.
All I'll be teaching procedures have been tested by me (Xperia Live With Walkman Wt19a) remembering that this tutorial can also be applied to other devices on the same line, but the person is aware of everything you're doing.."
Ok So we go to our interest.
It is recommend to have the Pc and Compani SUS for any drivers.
I will describe in steps. "Before you do anything BATTERY MUST BE 100% LOAD"
1º. You need to have CWM "ClockworkMod" To do a FULL BACKUP which TER is EXTREMELY IMPORTANT. If you can not install the CWM, progress is TOTALLY PUT IN YOUR OWN RISK. (OK JA ADVISED THIS).
2º.Download CWM-Install here is the link: http://www.4shared.com/rar/qZQbLbdc/CWM-Install.html?
3º. After completing the download extract to a folder.
4º.1. Run install-cwm '. Cmd
install-cmw1.cmd - Xperia Arc / Neo
install-cmw2.cmd - Xperia Mini / MiniPro / Active / Live With Walkman
2.Enable USB Debugging on device
3.Connect your device using usb data cable
4.Follow on screen instruction
5º. Once that's done you should have already installed the CWM ClockworkMod then we will open it when you boot the phone. (When the phone shine brighter or some flashing LED FINGER TIGHT TO KEEP THE VOLUME DOWN BUTTON AND HOLD briefly) This should open the recovery console CWM.
6º. Now with the volume knob go to Backup / Restore. Hold down the middle button to enter the option. (Choose Backup) just wait a bit and BACKUP YOUR READY NOW IS READY.
7º. Restart the phone.
8º. Now a lot of attention. We will install the kernel. First of all you need to have the drivers installed ADB; So here's the link: http://www.4shared.com/zip/2KEB9taN/Android_ADB_Interface.html
9º. Now plug the phone into fastboot MODE. is vol + and connect usb cable. Blue LED must be connected. Once that's done your computer will start looking for drivers and will not find ... Then Extract the ADB drivers into a Folder and indicate to the drivers downloaded. This should work. If you are having trouble installing the drivers ADB. I recommend you download a program called Driver Identifier. To locate the driver.
10º. Now with the drivers already instaldos We Correctly Download the program called Flash Tools.
11º. Open the program Flash Tools. After clicking on the radius and choose MODE Fastboot. Not FlashBoot NOT CONFUSE. Leave the phone connected in mass storage mode. Now in clice Reboot into fastboot mode (via Fastboot) Note If you want to connect in Manual mode Fastboot can be connected normally.
12º. Now comes the most decisive moment of all :victory: ... You sure which kernel will apply. For if you apply some kernel Wrong at Risk of Damaging the Machine there only using an Advanced Backup has been done to resurrect.
13º. In my case my Mobile Live With WT19 is a Walkman So I will choose the Kernel Kamarush to show in this tutorial. Link to Kernel http://forum.xda-developers.com/showthread.php?t=1709032
TIP. BEFORE YOU HAVE A ROM A CHOICE IN MEMORY CARD. IN MY CASE TO U.S. USING THE LINK REAL ICS V5 http://forum.xda-developers.com/showthread.php?t=1707876:laugh:
14º. In the Flash Tools Click Select Kernel to Flash. Go up the file you Kernel for Low LWW Live With Walkman. Once you have the absolute certainty that the Kernel is right ok just take two clicks and it already in the kernel will install automatic a process is really fast.
15º. Now when the phone started so get in CWM.
16º. Now you need to do a reset FULL. First MAKE TO DO a FACTORY RESET AFTER A WIPE CACHE PARTITION. GO TO ADVANCED TO CHOOSE AND WIPE Dalvik CACHE.
17º. Then come back and go to install zip from sdcard. Choose choose zip from sdcard.
18º. Now go to the folder that has the ROM. done so just follow the installation procedures is an aroma "Do not clear it does not change anything already WT19 is defined as the first. Do not change anything in the options wipe.
19º. Done it now when you return to the CWM modules you need to install the WIFI to work. Link http://www.4shared.com/zip/c3qIfOdP/new_wifi_modules.html?
Installing is the same as the ROM.
20 °. Once that's done just restart your phone and you're ready. Easy Bad is not the only the beginning you have to install the drivers and ADB CWM for even those who do not have.
THIS IS OPTIONAL.
Fix Accelerometer "ICS" http://www.4shared.com/zip/w82KRrKc/Fix_Accelerometer_LWW.html?
To leave after boot a little faster. http://www.4shared.com/zip/zEQNj-ek/SlaidyBoost-B1_SGS_By_Slaid480.html?
Thema Bacana.
http://www.4shared.com/zip/L0cpG0-V/Themes.html?
Done.
After all that, you leave a thank you.
My Device. [email protected] ICS v5
Kernel: Kamarush.
: D
Thanks to all staff of the XDA tutorial that contributes to my being.
.
Go to Post 2
Some add-ons.
To make more custom than it already is....
Notification Bar Transparent icons and more personalized
Apply the first modification; NEW Nice_Notification_Toggles_For_ICS.zip. http://www.mediafire.com/?awjo5isfkb9nmpi
Then disconnect and reconnect the device again in order CWM.
After applying the Second Amendment, with Transparent statusbar toggles.zip http://www.mediafire.com/?h8b64idzy556xd3
Always remember to have backup. causo act done to a problem.
If you're in trouble then refer to our friend who has provided such work
http://forum.xda-developers.com/showthread.php?t=1690037
am I completely blind or there really isn't any disclaimer that you have to unlock your bootloader to flash custom kernels?
can you play deatrigger n real ics
Thanks For the reply.
najodleglejszy said:
am I completely blind or there really isn't any disclaimer that you have to unlock your bootloader to flash custom kernels?
Click to expand...
Click to collapse
I did not add unlocking the bootloader I have not found necessary. Because there are already Topics unlock your bootloader. If you think I need a Tutorial Add active before Unlock this Topic. I do
No Problem for Games
trantiena10 said:
can you play deatrigger n real ics
Click to expand...
Click to collapse
i'm play deadtrigger.
Perfect runs very smooth and no lag. Add active you need a little overclocking can leave with 1600 Max and 1000 Min. From to play hard and not spend so much battery. Optimal Real ICS ROM V5.1. With some Fix
Thanks for this tutorial!
God, i remember when i didn't flash kernel and when i had to do all this **** to be root and have CWM...
sounds good tht TUT
eltonpestana said:
I did not add unlocking the bootloader I have not found necessary. Because there are already Topics unlock your bootloader. If you think I need a Tutorial Add active before Unlock this Topic. I do
Click to expand...
Click to collapse
no need to put the full tutorial, you could just write that before flashing a custom kernel you have to have your bootloader unlocked, and paste the link to this topic: http://forum.xda-developers.com/showthread.php?t=1730874
najodleglejszy said:
no need to put the full tutorial, you could just write that before flashing a custom kernel you have to have your bootloader unlocked, and paste the link to this topic: http://forum.xda-developers.com/showthread.php?t=1730874
Click to expand...
Click to collapse
Thanks for the tip
excuse me,i just bought this phone.i want to do everything i did to my previous xperia:X8.Xperia X8 had a manufacture date problem
does this phone have it too?what is the danger zone?does it exist?
at x8 11w28 or older is hard brick.can this phone be 100% secure unlocked?or is there any risk?please.
shadik555 said:
excuse me,i just bought this phone.i want to do everything i did to my previous xperia:X8.Xperia X8 had a manufacture date problem
does this phone have it too?what is the danger zone?does it exist?
at x8 11w28 or older is hard brick.can this phone be 100% secure unlocked?or is there any risk?please.
Click to expand...
Click to collapse
I have not tested the method of test point, but it seems safe. If the person does not want to risk connecting something wrong. You can try to follow in the footsteps of Sony http://unlockbootloader.sonymobile.com/ according to your model. In my point of view I prefer methadone plus Sony's command in Ms Dos. Regarding the problem of manufacturing data can rest assured that no problems have at least the Sony because methadone is a specific code. Now as to the test point can not guarantee. In my view these quiet line Xperia handsets are very strong. These devices are actually very good.
eltonpestana said:
I have not tested the method of test point, but it seems safe. If the person does not want to risk connecting something wrong. You can try to follow in the footsteps of Sony http://unlockbootloader.sonymobile.com/ according to your model. In my point of view I prefer methadone plus Sony's command in Ms Dos. Regarding the problem of manufacturing data can rest assured that no problems have at least the Sony because methadone is a specific code. Now as to the test point can not guarantee. In my view these quiet line Xperia handsets are very strong. These devices are actually very good.
Click to expand...
Click to collapse
but that way they will know i unlocked my bl and my warranty will be torn.because they know my phones IMEI.they report that to the centers and they know my phone doesnt have warranty even tho i relocked,stock kernel,stock rom,no root
EDIT
and i saw on other thread that i must downgrade to gb to root the phone.is it true?
shadik555 said:
but that way they will know i unlocked my bl and my warranty will be torn.because they know my phones IMEI.they report that to the centers and they know my phone doesnt have warranty even tho i relocked,stock kernel,stock rom,no root
EDIT
and i saw on other thread that i must downgrade to gb to root the phone.is it true?
Click to expand...
Click to collapse
Yes, you can't root your device on ICS directly, you have to downgrade if you don't want to unlock your bootloader. Everything is here: http://forum.xda-developers.com/showthread.php?t=1695514
[Q]
shadik555 said:
excuse me,i just bought this phone.i want to do everything i did to my previous xperia:X8.Xperia X8 had a manufacture date problem
does this phone have it too?what is the danger zone?does it exist?
at x8 11w28 or older is hard brick.can this phone be 100% secure unlocked?or is there any risk?please.
Click to expand...
Click to collapse
managed to do what you wished?
real ICS on locked bootloader?
hi all,
my device- sony ericsson wt19i LWW
OS- ICS 4.0.4
build no.- 0.431
root- yes
bootloader- locked.
Is it necessary to unlock bootloader to install CWM?????:silly:
I just want to know If I can install real ICS rom on my fone?
if yes,should I must install some kernel before???
Please help me with this !!!!!
very nice tut tnx! :good:
cool
tany with walkman said:
hi all,
my device- sony ericsson wt19i LWW
OS- ICS 4.0.4
build no.- 0.431
root- yes
bootloader- locked.
Is it necessary to unlock bootloader to install CWM?????:silly:
I just want to know If I can install real ICS rom on my fone?
if yes,should I must install some kernel before???
Please help me with this !!!!!
Click to expand...
Click to collapse
No need to unlock the bootloader to install CWM. However you will not get to modify your kernel. Cause to modify kernel you must have unlocked Bootloader. Installs CWM puts your phone in Debug mode and apply the. Bat according to your device model http://www.4shared.com/rar/qZQbLbdc/CWM-Install.html?
The next step you will have CWM.
Now you want to unlock your bootloader? you must use the means of unlocking the Sony the best way http://unlockbootloader.sonymobile.com/
After unlocking your bootloader. Then everything gets easier. Despois to unlock your bootloader. When you apply the Kernel it will come with CWM already built there then just do a full wipe and then apply the ROM to taste.
update the links above plsss... i want to install custom rom like Real Ics..but i'm not sure what kind of kerner it would fit in my LWW WT19i..can you post the link of the kerner ang Real ICS here so that i can install custom rom..thnx!
Great Tutorial, mate :good:
---------- Post added at 02:46 PM ---------- Previous post was at 02:08 PM ----------
tsunamixtreme said:
update the links above plsss... i want to install custom rom like Real Ics..but i'm not sure what kind of kerner it would fit in my LWW WT19i..can you post the link of the kerner ang Real ICS here so that i can install custom rom..thnx!
Click to expand...
Click to collapse
Maybe this would help you, mate
All Roms and Kernels Sorted & Updated: http://forum.xda-developers.com/showthread.php?t=1887855
--->Real ICS
*Real ICS r5.2: http://forum.xda-developers.com/showthread.php?t=1707876
*Real ICS Lite r4: http://forum.xda-developers.com/showthread.php?t=1739569
--->Kernels
*MESA: http://forum.xda-developers.com/showthread.php?t=1715679
*KRsH: http://forum.xda-developers.com/showthread.php?t=1709032
*KernelPanic: http://forum.xda-developers.com/showthread.php?t=1861905
*Rage: http://forum.xda-developers.com/showthread.php?t=1398910 (Both GB & ICS)
I have no idea what I'm doing so I thought following a step by step guide would help me...but apparently not.
I followed this guide because I wanted this ROM:
http://forum.xda-developers.com/showthread.php?t=1206625
BUT I used xRecovery from here (also I used this guide to get root access):
http://forum.xda-developers.com/showthread.php?t=1682966
I already had the baseband so I didn't do the optional step, but I did download the file after searching the topic for a live link (I wanted all the files I might need before starting so I could focus on the job).
My phone is now in an infinite loop of turning on, saying Sony Ericsson, then shutting down after a minute or so and retrying. I'm not sure what info to provide so I will just list off things I wrote down beforehand:
FIRMWARE: 2.1-UPDATE1
KERNEL: 2.6.29
BUILD: 2.1.1.A.0.6
SI: 1248-0835
I just wanted to let anyone who wants to help know I restored the backup through xRecovery...so it's like I never did anything....but I still really need to get rid of the OS I have and replace it with something clean, preferably what I tried the first time (first link).
next time post questions in X10 mini pro section, This is X10 section.
I dont know much about it but did you unlock your bootloader?
Thread Moved
Please take more care when opening a thread
THeLogiC said:
next time post questions in X10 mini pro section, This is X10 section.
I dont know much about it but did you unlock your bootloader?
Click to expand...
Click to collapse
I'm really sorry, I got lost by accident. I'm not used to this sort of forum .
I did not unlock a bootloader, I will go look at it now, thanks so much!
Alunny said:
I'm really sorry, I got lost by accident. I'm not used to this sort of forum .
I did not unlock a bootloader, I will go look at it now, thanks so much!
Click to expand...
Click to collapse
You don't need to unlock the bootloader becasue you're trying to install a modified stock-rom from SE, which will run on SonyEricsson's stock kernel with no problem.
I hope you did all the wipes in xRecovery?
wipe data/factory reset
wipe cache
Go into advanced menu
wipe dalvik-cache
wipe battery stats
Usually a bootloop on a rom that is proven to work is due to left-over junk in the cache or dalvik-cache. You can do these after you've installed the ROM.
Oh okay. I hadn't unlocked the bootloader and I was having trouble keeping my phone off and connected to my puter so thought I had better leave it for a day when I have time to focus on it. That was the part of rooting I was afraid of.
I did the first two cache but not the other two. Will try again in a few minutes and do those!
Same thing. Think I'm going to have to try the bootloader thing.
Alunny said:
Same thing. Think I'm going to have to try the bootloader thing.
Click to expand...
Click to collapse
If you want that particular ROM there is no need to unlock the bootloader.
It is more dangerous than just rooting your phone and only needed if you need a custom kernel, which you don't for this ROM.
If you have flashtool (you can get it from here if you don't have it)
Make sure USB-debugging is on on your phone
Start flashtool
Connect your phone to your computer
Root it using the ROOT button in flashtool (the button with the lock on it)
Install xRecovery using the button with the cross on it.
Use the menu to boot into xRecovery
Choose Install zip from sd-card (no need to rename the zip this way)
Choose zip from sd-card (it wil show you the content on your sd-card)
Choose your ROM's zip
Choose yes
After the install is done reboot your phone.
If it won't boot the zip-file you downloaded may be corrupted.
You can get back to your original firmware by using Sony Update Service or PC Companion, so your phone will work again.