Hello,
I flashed the most recent MiniCM9-3.0.2 ROM with nAa ICS kernel and followed all steps carefully. Everything works except i get no service. I can find the service network (vodafone) but i cannot connect to it. I've tried to go back to stock kernel and miniCMPro 21 and i get no service as well. Any help?
Thanks
nvm... I figured it was a bootloader-issue, but i guess since you can still find the network your gsm is still working.
In any case, you're on stock rom, try relocking your bootloader and see if you can connect to the network then (Restore-button in S1-Tool)
Hi,
I'll try to restore and see if it works.
Thanks for the help.
Hi,
I restored and reinstalled CM9 and now everything is working! Thanks
i am in exactly the same boat, just flashed same rom and same kernal and now no service, i also was under the impression if i unlocked the bootloader it unlocked phone to all networks but my virgin sim would not work either, the phone was originally on orange and my orange sim worked before i done this, what do i need to do guys just flash back stock rom, if so where can i find this, thanks!
You need to use PC Companion or SEUS from Sony Ericsson to repair your phone, and then relock your bootloader with the Restore-button in S1Tool.
There is a big difference between sim-unlocking your phone, and boot-unlocking your phone.
The first one will allow you to go on other networks, the second one will allow you to flash a custom kernel.
If you want to unlock your bootloader, follow the tutorial and make sure your simlock-certificate is compatible, otherwise, obtain an EMMA/IMEI code from your provider to get your phone on other networks. In that case you can unlock your bootloader too.
There are plenty of warnings in the bootloader-unlock tutorial to prevent you from bricking your phone, if you don't understand the options that are there, don't mess with your phone.
iv tried using the repair function of pc companion but it just says no updates available for this phone, and i cant seem to find SEUS can anyone point me in the right direction please.
think i made a mistake last night though while messing, i locked the bootloader back up, had the capital R where needed, but i had a custom rom but i had flashed back the stock kernel by mistake, now the phone sits with sony ericsson on screen and doesnt do anything else, been that way for hours now, any help really appreciated!
Hi
I had the same problem. The easy way is to put the phone back to stck and start all over again. You can find SEUS here (search on google)
update_service_setup-2.11.4.11.exe
After install it just follow the instructions. When it says no update was found just click next anyway. it will restore the phone. And then start from that point:
unlock bootloader, flash kernel and install new Rom imediatly after flash kernel. DONT LET YOU PHONE START WIHT OTHER ROM OTHERWISE IT WILL GET THE SMA PROBLEM! Put the ROM file in the SD card and after install new kernel go imediatley to CWM and install the ROM.
It should work!
cheers mate iv just downloaded it and run it, this is all that happens once i restart in flashmode, any ideas
Go to the Development section for your phone in this forum and try to find a ROM that is based on the stock rom (I think you should still be able to nstall xRecovery on your phone and enter it), then flash it just like you would other custom roms.
how can i go about installing xrecovery mate as i cant access phone the way it is, i can get it into flashmode, using the power and home button then using back quickly after i restart, iv tried flashing a custom kernel back onto it too from flashtool but it gives an error and doesnt do anything, if only i could get that kernel back on at least just to get it out of the freezing!
Open flashtool and connect your turned-on phone through usb, if it says phone connected with usb-debugging, you can use flashtool to install xrecovery and reboot into that.
SmG67 said:
Open flashtool and connect your turned-on phone through usb, if it says phone connected with usb-debugging, you can use flashtool to install xrecovery and reboot into that.
Click to expand...
Click to collapse
its saying device connected with usb debugging off, lol, what now, is there anyway to flash back to stock via flashtool as i have stock e10i 2.1 uk stock rom, if so how mate, appreciate the help! iv really jumped in at the deep end and got all confused, used to flashing samsungs!
are you on the X10Mini (E10, robyn), or X10MiniPro (U20, mimmi)?
SmG67 said:
are you on the X10Mini (E10, robyn), or X10MiniPro (U20, mimmi)?
Click to expand...
Click to collapse
its the x10 mini mate, e10 model!
ok hang on
this is caused by your x10mini conditions just flash stock with flashtoll and if you want checke it with seus it will have a repair button
Theliakos said:
this is caused by your x10mini conditions just flash stock with flashtoll and if you want checke it with seus it will have a repair button
Click to expand...
Click to collapse
im unsure of how to do that mate,do i need to put the stock rom inthe firmware folder same as i did for the kernel as i tried but it didnt show up, any guidance is much appreciated!
big-hol said:
im unsure of how to do that mate,do i need to put the stock rom inthe firmware folder same as i did for the kernel as i tried but it didnt show up, any guidance is much appreciated!
Click to expand...
Click to collapse
Check your inbox
ok guys this is what im getting when trying to flash stock rom via flash tool
Related
Having a few issues. Yesterday while using the twitter app, my Xperia X10 froze. I waited for like 5 minutes but it was still stuck so i took out the battery and put it back in. I restarted the phone and then my Wifi stopped working. After alot of reboots, wifi started to pick my wifi connection but then it would connect and give me limited connectivity. I did a few more reboots and then i think i went into xrecovery and by mistake recovered my phone to some earlier date which completely messed up my phone. Now i cant access my ROM i can only use xrecovery. If i try to load past the xrecovery, it shows the Sony Ericsson screen and then it goes blank, The notification light shows a white signal and then it restarts.. Then again it shows the SE Screen and again the white notification light and again restart.. this keeps on happening.
Anyway i decided it was time to install a new rom and it would solve my problems.. I put my phone in Xrecovery and tried to mount the SDcard but the memory card just wont show up on my computer for some reason..
Anyway then i took a card reader and put the roms on the root of my card and then put my card back into my phone.. After that i tried to install the custom zip but it gives me the error E: Cant mount /sdcard (device or resource busy)
WTF?
Can someone help me im clueless !!!
Okey i flashed the 2.1 Rom now.. Do i need to root my phone again? Do i need to install xrecovery again? :S
Hi if you flashed the stock 2.1 ROM then yes you will have to root the phone again and install xrecovery. I reckon you should update to 2.3.3 first using either flashtool, PC companion or SEUS which ever you prefer. Then root using flashtool 0.4.2 and install xrecovery using flashtool as well. Good luck hope this helps.
What rom do you use when phone froze? And why you flash first 2,1 rom? You must first flash 2.3, then root, install xrecovery, (unlock bootloaders if you want) and thats all
I was using 2.3.3 Wolfbreak i think ! Not sure.. Updated a 2-3 months back.
I flashed 2.1 because i read somewhere thats what people did when they got the mount sdcard problem in xrecovery.
Sorry if i sound like a noob but whats a bootloader and why would i unlock it?
Anyway im downloading 2.3.3 first and will then install xrecovery. I want to install one of the MIUI ROM's.. Which one should i install? Which one is the most stable and has the most features?
Unlocked bootloaders just allows change boot logo I think) And for miui I'd suggest oddie or a1exander roms, they are stable and everthing work
Sorry for bad english
Thanks !!!
Installing 2.3.3 right now. Will let you guys know if there's any problem.. Thanks again
Before you install xrecovery don't forget to root first I would use flashtool 0.4.2 for this check out the link http://forum.xda-developers.com/showthread.php?t=920746 The bootloader as i understand it is basically the very start of the bootup loads the kernel then the ROM loads. The white Sony Ericsson logo when you fist power on the phone is generated by the bootloader. A couple of reasons to unlock the bootloader are to load custom kernels faster an they are more stable this way instead of the bootloader bypass method. Some ROM's e.g Cyanogenmod need an unlocked bootloader I believe. BEWARE I heard of people bricking there phone during the unlock process i would do plenty of research before unlocking. I would have a read of these threads before unlocking your bootloader http://forum.xda-developers.com/showthread.php?t=1254087 http://forum.xda-developers.com/showthread.php?t=1253277&highlight=unlock+bootloader+proper+method . I still have not been game enough to unlock my bootloader yet phone still under warranty thought. Good luck nothing wrong with being a noob we all start some where I am a noob too just with lots of reading and experimentation behind me.
Thanks !
Okey well im going for this:
1. Flash 2.3.3 Rom using flashtool
2. Install xrecovery using flash tool
3. Install Alexander's miui by using custom zip in xrecovery (right?)
That should be it? Do i really need to unlock boot loader? Dont really want to mess anything up
Firts root and then install xrecovery Don't install Alexander miui version 11, wait tomorow. 11v have many bugs:/ Don't afraid nulock bootloaders, just read instructions, not rush and everything be okay
Forry for bad english.
2.3.3 installed.
Trying to root it, But flashtool's root button is greyed out ?
Installl drivers from flashtool folder?
Done but still greyed out.. Also enabled USB debugging and unknown applications in the phone
Here http://forum.xda-developers.com/showthread.php?t=1196808 read instructions and be happy You must first install kernel I think:/
How do i install kernel ?
You don't need to install a kernel yet you have the stock kernel installed already from the 2.3.3 install. Have you put the phone in flash mode before you try and root it. If not put it in flash mode then try and root. Note the op posted is using the old version of flashtool so it will look a bit different.
In that post all write just read You know how put phone in flash mode?
Nope.. The root option in flashtool is just greyed out no matter if im in flash mode or not.
My kernel is 2.6.29-00054-g5f01537 [email protected] #1
Android: 2.3.3
Baseband: 2.1.71
Buildnumber: 3.0.1.G.0.75
I hope i flashed the correct 2.3.3 rom? I had a 2.3.3 rom by the name of x10_2.3_aro.ftf I flashed that.
Don't understand. Just follow intructions in my link. No matter that flashtool version old, it makes their job.
Sorry for bad english.
OK I think you need to go back to basics download Sony PC companion and update or repair your firmware from there that way you know you had the right version of firmware for your phone. Firmware can be carrier dependant. Once this is done then try to root using flashtool
Sent from my X10i using XDA App
Hello All.
I followed the install guide for MiniCM7, but after rebooting the Sony Ericsson Logo stays on the screen. not a constant reboot cycle, the words just stay there.
searching around these forums, it seems one of SEUS, FlashTool, or to a lesser extent PC Companion should be able to restore the phone, but the products from SE report no updates found and no matter which version of FlashTool or which firmware I try it aborts immediately.
I can, however, get into CWM. can anything be done from there?
If I'm not mistaken se PC companion and se update service says your phone is upto date and there is an option repair which flashes to 2.1 ie the latest update
Click on the repair option and it will again flash the official rom ..
Don't forget to click the thanks button
just used the firmware from http://forum.xda-developers.com/showthread.php?t=1294579 and it flashed fine. only question is do I bother trying all this again.
mikewhy said:
just used the firmware from http://forum.xda-developers.com/showthread.php?t=1294579 and it flashed fine. only question is do I bother trying all this again.
Click to expand...
Click to collapse
did you ever tried to unlock the boot loader?
it seems not
so learn how to unlock it, and then retry (i don't think you've read all the miniCM7 thread's first post and FAQ thread's first and third post)
and please, use flashtool 0.2.9.1
just do the factory reset in CWM recovery
guys i just root my X10 mini and i need upgrading android to 2.3...does need to create ROM or just download android 2.3 file install it???i need your respone and a helping hand...thanks
Please use the search function the next time. For your convenience Click Here
And try this custom ROM for starters. It doesn't require you to unlock boot loader and install a custom kernel.
and when you know how to use the search function then I know for sure you can manage to unlock your boot loader and can flash a custom ROM
lol. they will so kill you for this question. It's forbidden to be a noob in these forums.
Here are the steps you must follow in "search" terms:
1. Root (obviously you already did).
2. Unlock bootloader. (google the hell out of it, search these forums. To install a new rom you need to install a new kernel. For a new kernel you need to unlock the bootloader. Search "How to Unlock the bootloader"). You will need your PC.
3. Flash a new Kernel and Install CWM recovery. Generally just flashing the kernel takes care of the CWM installation. (It's some kind of android bios you must install first thing after having unlocked the bootloader. Check "flashtools" and "how to flash a kernel" guides). You'll need your PC.
4. Flash the ROM. It's the easiest part. It's done by hard reseting the phone. check "How to flash a ROM".
gl dude.
There's nothing wrong with being noobish. Everyone is a noob at some point. This is my first Android anything and I knew absolutely nothing before I came here: "Root? Custom rom? ClockworkMod Recovery? What the hell does any of it mean?!"
But there's a fine line between asking noob questions and asking noob questions without doing any research. But hey..at least the OP was polite.
Ticklefish said:
There's nothing wrong with being noobish. Everyone is a noob at some point. This is my first Android anything and I knew absolutely nothing before I came here: "Root? Custom rom? ClockworkMod Recovery? What the hell does any of it mean?!"
But there's a fine line between asking noob questions and asking noob questions without doing any research. But hey..at least the OP was polite.
Click to expand...
Click to collapse
the line would be drawn like n00b vs n3wbi3. n00b - as what my sig says and n3wbi3 - doesn't ask unless there's a prob or question that needs to be clarified. i was once a n00b but know where to start and that is hitting the start button.
How does i upgrade my xperia x10 mini to 2.3 android
Dear sir,
i want to upgrade to my xperia x10 mini to android 2.3.
presenently i have 2.1 in my phone.
am already done rooting.
i have total size of my sd card 8g.b. in that i done second partition in EXT2 2g.b.
if i upgrade to 2.3, which memory is using for as internal memory?
plz tell about how i upgrade to 2.3, with step by step and screen shots. plzzzzzzzzz sirr
Well,i think there was a thread on that somewhere dont rember where though anyway,,
First go to the x10 mini pro android devolpment forums and download cwm recovery installer after that its pretty simple for android 2:3 I suggest minicm7 if u go to its post it will tell you all steps and to open cwm u click back button while ur phone opening
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
arey bhai itna chila kyon raha hai.....
aaram se bol na
rajubehappy said:
plz tell about how i upgrade to 2.3, with step by step and screen shots. plzzzzzzzzz sirr
Click to expand...
Click to collapse
that would be time consuming to post step by step with screenshots. better do it yourself first and ask the community if you ran into a prob. that way youll learn. and please use the search function. there are lots of guide that you can use you just have to look for it. remember no pain no gain.
Dear sir,
I already done as ur steps but i get many problems.
After unlock bootloader i not get network signal, but i continue ur procedure and done flash and open in CWM clockmode i install Update.zip. and after switch off and on. but its not working. my phone shows in WHITE LETTERS "Sony Ericsson" its not boot and not off.
plz sir give me solution plzzzzzzzzzzzzzzzzzzzzz
as i see you have a simlock first unlock your sim and then unlock bootloader install kernel and then gingerbread
demoniacs said:
And try this custom ROM for starters. It doesn't require you to unlock boot loader and install a custom kernel.
Click to expand...
Click to collapse
Doing your research... Just about every current iteration of GB-Roms for the X10Mini requires a custom kernel, The installation instructions for the ROM you linked to clearly states to unlock the bootloader and install nAa-08 kernel.
If you want to point people to ROMS that run on stock kernel, stick to froyo/CM6.
plz reply me
plz answer my problem
First of all, you lost your network-capability when you unlocked your bootloader, so i hope you made a backup of your orignal firmware. Restore that and then relock the bootloader, your network capability should hopefully come back
You can't run any Gingerbread roms if you're on the X10Mini with a locked bootloader, you'll have to stick with older Froyo (2.2) Roms, just make sure the ROM you choose does not require a custom kernel. The older ones probably have to be installed with Xrecovery too, instead of CWM, use flashtool to get XRecovery onto your phone.
rajubehappy said:
Dear sir,
I already done as ur steps but i get many problems.
After unlock bootloader i not get network signal, but i continue ur procedure and done flash and open in CWM clockmode i install Update.zip. and after switch off and on. but its not working. my phone shows in WHITE LETTERS "Sony Ericsson" its not boot and not off.
plz sir give me solution plzzzzzzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
It isnt SIM lock, it is SEMC SIMLOCK CERTFICATE. Try S1Tool what it says.
I have the same problem and I solve like in this tread http://forum.xda-developers.com/showthread.php?t=1254225
mightyoutlaw said:
It isnt SIM lock, it is SEMC SIMLOCK CERTFICATE. Try S1Tool what it says.
I have the same problem and I solve like in this tread http://forum.xda-developers.com/showthread.php?t=1254225
Click to expand...
Click to collapse
No need to shout, not every x10 mini or x10mini pro comes with a semc-simlock certificate, if your phone is simlocked by your provider, s1tool gives you simlock-certificate not recognised.
If you unlock the bootloader on such a phone, it is most likely it will disable your radio-capability.
So everytime someone unlocks their bootloader and gets no service anymore, relocking is the only option, and then sim-unlock their phone using Omnius, or (the safest way) with an EMMA/IMEI code from their network-provider.
After that you can unlock the bootloader safely.
problem occured in upgrading
dear sir i already locked my boot loader. but i cant upgrade firmware or flash through sony companion and SEUS. how can i upgrade or restore my firmware. its shown only "Sony Ericsson" in WHITE LETTERS. plz resolve my problem.
its occured any error in flashing? any different kernal is there?
I am on custom ROM right now, phone is rooted though and just unlocked the bootloader a couple days back. I was wondering, if I flashed the nAa-11 kernel, will I still be able to use stock ROM on it until I install some GB ROM? Or do I have to flash the GB ROM right after flashing the nAa-11 kernel for the phone to work?
Just for the record, I like doing one thing at a time then checking if phone is fully stable before moving to the next step... Makes me TOO nervous
The ROM's are all compiled against a particular kernel, so stock rom won't work on the nAa-kernel, and most GB-roms won't work on the stock kernel.
You want to flash the nAa-11 kernel, do a reboot, and press the back-button several times until you get into CWM That's as sure as you can be that everything is stable at that point.
Then you can do the usual steps for installing the ROM, (Wipe data, cache, etc., install from sd-card)
If you forgot to put the ROM on your sd-card you can connect your phone through CWM in the mounts and storage section, mount usb-storage) and then copy the ROM to your phone.
hello, I've got a huge problem. I own Xperia Arc S and I wanted install the new Android ICS without waiting for my country release. It wasn't rooted and bootloader wasn't opened. I downloaded and installed Flashtools 0.6.8 for Windows from here:
http://ul.to/w076p5wf
Then I click on "Root" button, the process started but also ended with error and root failed. I also installed Flashtool-drivers --> click on Flashboot mode and flashed the kernel with kernel of ICS. Kernel was from:
http://eddy.uni-duisburg.de/bin4ry/L....0.562_NCB.ftf
from the page:
http://forum.xda-developers.com/show....php?t=1598072
It was ok so i click on "return to hone mode". But it failed and now my phone can not start. I only see startup sony ericsson animations which always reloads I tried remove the battery but it won't help. My computer on windows 7 also do not see dhe device, always trying to install the device driver and fails everytime. Please help if you can and know how
It seems I've got BootLoop...
So the Kernel is installed? Try to boot in recovery mod, maybe you have it now (I can't see the page where you downloaded the kernel). While you're smartphone is booting, press "Volume Down" again and again until you see the menu appear. Then you could do a wipe cache, maybe it will help
Hope someone will have a better answer...
I will try this:
http://forum.xda-developers.com/showthread.php?t=1450902
I am downloading 2.3.4 global generic from here:
http://uploaded.to/file/gsfx4w60
and then I will try to flash it with FlashTool 0.6.8.0
Ok, I think it will work! I hope you could use you're phone ASAP!
But to do this I need .ftf file, global generic, but I can't find it anywhere
even on XDA forum I tried, It is said that it is.ftf file and then I've got plenty of .sin files
Can somebody send me an .ftf file please?
I found this: http://forum.xda-developers.com/showthread.php?t=1330314
you have to unlock your bootloader first to be able to flash anything other than the stock rom on your phone. it is free and you can do it through sony. but you might be able to flash the ics stock its just tricky due to flashtool needing an update
heres ics stock http://forum.xda-developers.com/showthread.php?t=1598072
and how to http://forum.xda-developers.com/showpost.php?p=24825196&postcount=103
one post up has original .ftfs
it works! )
OK, I created my own ftf file (a few files, one of them worked), and flashed it with FlashTool, it seems that now I have pure stock 2.3.4 firmware although two of four branded applications from Orange has gone. I don't know why two are still in my phone if now I've got World generic (I've checked it in service menu), wired, hmm. Wired seems that all my applications I had before are still installed in my phone Also some new from stock sony like Let's golf or Video Unlimited. Now I will try to unlock bootloader, root the phone and will try to install ICS with FlashTool. Thanks a lot everybody for help and suggestions
Great!
Go unlock the bootloader and have fun!!
Is there a way to root my officialy updated to ICS, Xperia Mini(ST15i) without unlocking bootloader?(in order to downgrade etc...) I just want to root my xperia mini without messing up with the warranty....Any way to root it with locked bootloader? (4.1.B.0.431)
Thanks in advance
You have to downgrade to Gingerbread, root it and then upgrade to ICS using THIS tutorial.
There could be a different way: you should flash the 4.0.3 kernel (for example the Arc one), but I can't find the tutorial. Use the search button and see if you can find it
Feanor88 said:
You have to downgrade to Gingerbread, root it and then upgrade to ICS using THIS tutorial.
There could be a different way: you should flash the 4.0.3 kernel (for example the Arc one), but I can't find the tutorial. Use the search button and see if you can find it
Click to expand...
Click to collapse
downgrading needs unlocked bootloader... :/ i had bricked my mini some time ago because i tried to downgrade with locked... (( any other way?
Thanks
EDIT: flashing xperia arc's or Neo V's for example would brick my phone....wouldn't it? (and it also needs bootloader unlock...so i don't think i would do that... BUT thanks for your help mate
No, flashing a .ftf does NOT need an unlocked bootloader. You need to unlock it only if you want to flash a custom kernel, but for custom ROMs you can use flashtool.
Same for the 4.0.3 kernel. It's a stock kernel, so you can flash it via flashtool
It WILL end in bootloop, though. The tutorial says you can use DoomLord's root kit anyway, root the phone and then flash again the 4.0.4 kernel. But find it and read it carefully, cause I didn't try it and I can't assure you it will work.
I tried the first one I suggested, though, and my bootloader is locked!
Feanor88 said:
No, flashing a .ftf does NOT need an unlocked bootloader. You need to unlock it only if you want to flash a custom kernel, but for custom ROMs you can use flashtool.
Same for the 4.0.3 kernel. It's a stock kernel, so you can flash it via flashtool
It WILL end in bootloop, though. The tutorial says you can use DoomLord's root kit anyway, root the phone and then flash again the 4.0.4 kernel. But find it and read it carefully, cause I didn't try it and I can't assure you it will work.
I tried the first one I suggested, though, and my bootloader is locked!
Click to expand...
Click to collapse
man i have a problem...when i place my phone into flashmode (down key) it disconnects on its own...and that's why i bricked my phone long time ago....now i am afraid to do that i have installed the flashtool drivers from Flashtool/drivers.... but they mustn't work for my mini....any solution please give me the drivers you use for your Mini and work with it if you can i would really appreciate that!
What do you mean, it disconnects? How much time does it take for it to disconnect? Mine does the same. If I plug it and wait for a minute or so doing nothing, it disconnects. But if I start flashing a ROM it doesn't.
The drivers I installed are in \Flashtool\drivers.
Feanor88 said:
What do you mean, it disconnects? How much time does it take for it to disconnect? Mine does the same. If I plug it and wait for a minute or so doing nothing, it disconnects. But if I start flashing a ROM it doesn't.
The drivers I installed are in \Flashtool\drivers.
Click to expand...
Click to collapse
it takes about 1-2 minutes to disconnect.But, what if it disconnects while on downgrading?
It doesn't. At least, mine doesn't! And I flashed firmware twice a day in the last week
Anyway, both ways need the use of flashtool... so if you don't want to try it, you can't root ICS
Feanor88 said:
It doesn't. At least, mine doesn't! And I flashed firmware twice a day in the last week
Anyway, both ways need the use of flashtool... so if you don't want to try it, you can't root ICS
Click to expand...
Click to collapse
Pfff i'm a bit scared.....there is no hope that there will be somewhen another way to root...?
No, I'm sorry. Anyway, just follow this steps:
1) DON'T plug your phone.
2) Open flashtool
3) Click the lightning icon and select flashmode
4) Select the .ftf you want to flash: if you want to downgrade, select wipe data. If you want to flash the 4.0.3 kernel, unckeck wipe data and check "exclude" for everything apart from kernel. Which means you'll only flash the kernel
5) Start: you'll be asked to plug your phone. Plug it now in flashmode. This way you'll avoid it being unplugged.
Flashing will start, and your phone won't be unplugged. I suppose it's unplugged automatically when you're not doing anything, it's the same for me, but I repeat, whenever I flash something (kernel, whole ROM, whatever) everything just goes fine
Feanor88 said:
No, I'm sorry. Anyway, just follow this steps:
1) DON'T plug your phone.
2) Open flashtool
3) Click the lightning icon and select flashmode
4) Select the .ftf you want to flash: if you want to downgrade, select wipe data. If you want to flash the 4.0.3 kernel, unckeck wipe data and check "exclude" for everything apart from kernel. Which means you'll only flash the kernel
5) Start: you'll be asked to plug your phone. Plug it now in flashmode. This way you'll avoid it being unplugged.
Flashing will start, and your phone won't be unplugged. I suppose it's unplugged automatically when you're not doing anything, it's the same for me, but I repeat, whenever I flash something (kernel, whole ROM, whatever) everything just goes fine
Click to expand...
Click to collapse
i maybe try it later... thanks for your replies man DD i appreciate that
kwstas 13 said:
i maybe try it later... thanks for your replies man DD i appreciate that
Click to expand...
Click to collapse
Let me know if you need more help!
Feanor88 said:
Let me know if you need more help!
Click to expand...
Click to collapse
A friend of mine told me that if i try with locked bootloader is a simple suicide!!! :/ Now i am confused again :S
kwstas 13 said:
A friend of mine told me that if i try with locked bootloader is a simple suicide!!! :/ Now i am confused again :S
Click to expand...
Click to collapse
Who is that friend of you? He is trolling. Stay away from him. And learn this. Feanor here is a better friend for you than him, when it comes to rooting your phone.
Just do as in the tutorial Fenor had shared in his first post. Everything will be fine.
And you say you bricked your phone. May we know how your repaired it?
Thanks,
Rick
Sent from my SK17i using XDA
DragonClawsAreSharp said:
Feanor here is a better friend for you than him, when it comes to rooting your phone.
Click to expand...
Click to collapse
Blushing
But don't forget I'm a noob after all... I'll just keep pointing other people's tutorials, like for example yours, Rick
DragonClawsAreSharp said:
Who is that friend of you? He is trolling. Stay away from him. And learn this. Feanor here is a better friend for you than him, when it comes to rooting your phone.
Just do as in the tutorial Fenor had shared in his first post. Everything will be fine.
And you say you bricked your phone. May we know how your repaired it?
Thanks,
Rick
Sent from my SK17i using XDA
Click to expand...
Click to collapse
while i was downgrading with locked bootloader the procces stopped on its own at 43%....and my phone wouldn't turn on and didn't even worked with flashtool....i sent it to a service centre and they fixed it ( i think i hadn't installed the proper drivers....am i right?)
kwstas 13 said:
while i was downgrading with locked bootloader the procces stopped on its own at 43%....and my phone wouldn't turn on and didn't even worked with flashtool....i sent it to a service centre and they fixed it ( i think i hadn't installed the proper drivers....am i right?)
Click to expand...
Click to collapse
That's strange. Anyway, if you installed PC Companion you have adb drivers. Install flashmode drivers from Flashtool installazion folder, you find the executable in \Flashtool\drivers. If Windows prompts you that the drivers are dangerous, just install them anyway.
What I can say is that you DON'T need to unlock your bootloader to use flashmode in Flashtool. Otherwise, my phone would have exploded long ago
Now let me tell you this: if you are SURE you did everything the right way, and still your phone got bricked, then maybe you shouldn't try. you never know.
If you tried to to something you didn't know how to do, you probably made a mistake, and that's why the phone got bricked.In this case, I'd give it a try.
But we're not able to see your phone and test it, so whatever you do, unfortunately, you always do it on your own risk.
I couldn't be more sincere.
kwstas 13 said:
while i was downgrading with locked bootloader the procces stopped on its own at 43%....and my phone wouldn't turn on and didn't even worked with flashtool....i sent it to a service centre and they fixed it ( i think i hadn't installed the proper drivers....am i right?)
Click to expand...
Click to collapse
On all probability you are correct.
They (The service centre people) flashed a firmware using Flashtool. That's what they must have did. See. I will explain things a bit.
Your phone has some memory in it (this corresponds to what was known as phone memory in older phones). This memory is of Read Only type. That is ROM. Now, of all the types of ROMs, androids have EEPROM. That stands for Electronically Erasable Programmable ROM. So you can electronically erase the data stored in the ROM and write new data on it (even though it is called Read Only). This process of writing new data on the ROM is called flashing.
For flashing, the tool that is available to us as an open source, is Flashtool. Using it we can flash ROMs into our phones, erasing the earlier ones.
Now, Sony will not want us to flash Cyanogen Mod to our phones. So they have made up the concept of locking the bootloaders. With locked bootloaders custom ROMs can not be flashed to your phone. This is because most custom ROMs are designed for a specific Kernel (the intermediate between the OS and the hardware), and flashing a custom kernel requires unlocked bootloaders.
If you want, you can flash firmwares (ROMs + Kernels released by Sony) even if you are on locked bootloader, as long as the firmware files are signed by Sony.
This restriction however is against the OpenSource spirit of Android, and thus Sony gives us the scope to unlock bootloader at the cost of loosing the warranty, and the DRM keys (search google for that).
Now coming to your problem of unability to flash properly, make sure that you have installed all the drivers. For that open up /drivers folder in /flashtool and install the .exe there. Also install the adb drivers of your device. For that have PC Companion installed on your PC. Flashing will happen properly then.
Thanks,
Rick
Sent from my SK17i using XDA
DragonClawsAreSharp said:
On all probability you are correct.
They (The service centre people) flashed a firmware using Flashtool. That's what they must have did. See. I will explain things a bit.
Your phone has some memory in it (this corresponds to what was known as phone memory in older phones). This memory is of Read Only type. That is ROM. Now, of all the types of ROMs, androids have EEPROM. That stands for Electronically Erasable Programmable ROM. So you can electronically erase the data stored in the ROM and write new data on it (even though it is called Read Only). This process of writing new data on the ROM is called flashing.
For flashing, the tool that is available to us as an open source, is Flashtool. Using it we can flash ROMs into our phones, erasing the earlier ones.
Now, Sony will not want us to flash Cyanogen Mod to our phones. So they have made up the concept of locking the bootloaders. With locked bootloaders custom ROMs can not be flashed to your phone. This is because most custom ROMs are designed for a specific Kernel (the intermediate between the OS and the hardware), and flashing a custom kernel requires unlocked bootloaders.
If you want, you can flash firmwares (ROMs + Kernels released by Sony) even if you are on locked bootloader, as long as the firmware files are signed by Sony.
This restriction however is against the OpenSource spirit of Android, and thus Sony gives us the scope to unlock bootloader at the cost of loosing the warranty, and the DRM keys (search google for that).
Now coming to your problem of unability to flash properly, make sure that you have installed all the drivers. For that open up /drivers folder in /flashtool and install the .exe there. Also install the adb drivers of your device. For that have PC Companion installed on your PC. Flashing will happen properly then.
Thanks,
Rick
Sent from my SK17i using XDA
Click to expand...
Click to collapse
You, and all developers/people here, are simply awesome!.... But this sh*t with unlocking bootloader and loosing warranty is so....stupid....I think i will give it a try and i am gonna sure thank you.... Somethink else....my phone has also a problem on the screen while scrolling....do you know if that is a hardware or a firmware problem?
What do i mean when i say scroll problem:
1st example: While browsing the Internet and scroll with fast moves, links are pressed on its own and new tabs are opened,as links are pressed.
2nd example: While i scroll the app drawer,fast s make apps open without my will....
3nd exapmle and the most representative: While playing fruit ninja and do fast moves to cut the fruits, the touchscreen doesn't even fell that i touch the screen!!! I do fast moves to cut the fruits and nothing happens!! As a result i always lose! (just joking....)
My phone is fast and really smooth only when my moves are slow....any thoughts about that? :/
Thanks once again for your BRAVE help!
You have a Mini, right? That's a hardware problem. Very common, even if not everyone realizes it. Check THIS thread for a (possible?) solution.