hello, I've got a huge problem. I own Xperia Arc S and I wanted install the new Android ICS without waiting for my country release. It wasn't rooted and bootloader wasn't opened. I downloaded and installed Flashtools 0.6.8 for Windows from here:
http://ul.to/w076p5wf
Then I click on "Root" button, the process started but also ended with error and root failed. I also installed Flashtool-drivers --> click on Flashboot mode and flashed the kernel with kernel of ICS. Kernel was from:
http://eddy.uni-duisburg.de/bin4ry/L....0.562_NCB.ftf
from the page:
http://forum.xda-developers.com/show....php?t=1598072
It was ok so i click on "return to hone mode". But it failed and now my phone can not start. I only see startup sony ericsson animations which always reloads I tried remove the battery but it won't help. My computer on windows 7 also do not see dhe device, always trying to install the device driver and fails everytime. Please help if you can and know how
It seems I've got BootLoop...
So the Kernel is installed? Try to boot in recovery mod, maybe you have it now (I can't see the page where you downloaded the kernel). While you're smartphone is booting, press "Volume Down" again and again until you see the menu appear. Then you could do a wipe cache, maybe it will help
Hope someone will have a better answer...
I will try this:
http://forum.xda-developers.com/showthread.php?t=1450902
I am downloading 2.3.4 global generic from here:
http://uploaded.to/file/gsfx4w60
and then I will try to flash it with FlashTool 0.6.8.0
Ok, I think it will work! I hope you could use you're phone ASAP!
But to do this I need .ftf file, global generic, but I can't find it anywhere
even on XDA forum I tried, It is said that it is.ftf file and then I've got plenty of .sin files
Can somebody send me an .ftf file please?
I found this: http://forum.xda-developers.com/showthread.php?t=1330314
you have to unlock your bootloader first to be able to flash anything other than the stock rom on your phone. it is free and you can do it through sony. but you might be able to flash the ics stock its just tricky due to flashtool needing an update
heres ics stock http://forum.xda-developers.com/showthread.php?t=1598072
and how to http://forum.xda-developers.com/showpost.php?p=24825196&postcount=103
one post up has original .ftfs
it works! )
OK, I created my own ftf file (a few files, one of them worked), and flashed it with FlashTool, it seems that now I have pure stock 2.3.4 firmware although two of four branded applications from Orange has gone. I don't know why two are still in my phone if now I've got World generic (I've checked it in service menu), wired, hmm. Wired seems that all my applications I had before are still installed in my phone Also some new from stock sony like Let's golf or Video Unlimited. Now I will try to unlock bootloader, root the phone and will try to install ICS with FlashTool. Thanks a lot everybody for help and suggestions
Great!
Go unlock the bootloader and have fun!!
Related
Have an Xperia X10 with Android 2.1. Wanted to root my phone to upgrade to gingerbread. However i admit i got confused with the plethora of links and pages and 6 hours later i have a phone that only has "Sony Ericsson" written on it.
Here's how i started - based on DoomLord's instructions i installed Flashtool (from here) . HOwever I was unable to find xrecovery folders in the log messages.
Followed step by step procedure but realised that each time i upgraded the kernel, phone seemed to be going into some bootloop.
I realised that this may be due to my phone running on Android 2.1
SO i moved to another thread . Downloaded these files with the hope that they would work.
meanwhile was also following video through a similar page that was detailing the methods for installing custom ROMs. The reason i followed another source is only because the intsructions on all these pages seemed very confusing.
i believe i may have misled myself by following two different procedures here or the files i downloaded were incorrect.
After I upgraded the kernel as per doomlord's instructions, i went into xRecovery and formatted the data folders. I had already copied the ROM files provided by Doomlord in this thread onto my SD card under a new folder. However, xRecovery was asking for .Zip files while there were .7z .
Tl;dr - formatted data on xRecovery and did not have the correct updated files. phone is not functioning now
Tragically so, I am now left with an Xperia that only seems to be displaying the words "Sony Ericsson". I wish to learn from this experience but hope its not at the cost of a good phone!
Would the experts believe that this phone can be un-bricked now???
your phone is not bricked so dont worry. just make sure you have the newest flashtool. dont upgrade the kernel if you are staying on 2.1. if youhavent downgaded the kernel then do so. if it doesnt work, just download your baseband and firmware you want. as for rooting on 2.1, you can use super one click. for 2.3, you hav to use the flashtool
If you are on 2.1, then you don't have to go through all the downgrade/upgrade hassel.
Just turn on debugging and use flashtool/superoneclick to root.
Sent from my X10i using XDA App
fcb1 said:
your phone is not bricked so dont worry. just make sure you have the newest flashtool. dont upgrade the kernel if you are staying on 2.1. if youhavent downgaded the kernel then do so. if it doesnt work, just download your baseband and firmware you want. as for rooting on 2.1, you can use super one click. for 2.3, you hav to use the flashtool
Click to expand...
Click to collapse
aR_ChRiS said:
If you are on 2.1, then you don't have to go through all the downgrade/upgrade hassel.
Just turn on debugging and use flashtool/superoneclick to root.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Wow... such a relief to know that. Was exasperated and down-beat to even look at my phone.
please help me in identifying the right version of softwares and protocols to follow. In the current state, i connected my phone and flashed it once using flash tool but there has been no progress. Am i missing out a few steps?
How do i upgrade to 2.3 eventually?
Thanks a lot for the support and motivation
ok if you want to go to 2.3 download the firmware from here
http://forum.xda-developers.com/showthread.php?t=936733
flash it through the flashtool but you have to be in flash mode.
fcb1 said:
ok if you want to go to 2.3 download the firmware from here
http://forum.xda-developers.com/showthread.php?t=936733
flash it through the flashtool but you have to be in flash mode.
Click to expand...
Click to collapse
Reading this from office now. Shall check in a few hours once i'm back home.
Having a few issues. Yesterday while using the twitter app, my Xperia X10 froze. I waited for like 5 minutes but it was still stuck so i took out the battery and put it back in. I restarted the phone and then my Wifi stopped working. After alot of reboots, wifi started to pick my wifi connection but then it would connect and give me limited connectivity. I did a few more reboots and then i think i went into xrecovery and by mistake recovered my phone to some earlier date which completely messed up my phone. Now i cant access my ROM i can only use xrecovery. If i try to load past the xrecovery, it shows the Sony Ericsson screen and then it goes blank, The notification light shows a white signal and then it restarts.. Then again it shows the SE Screen and again the white notification light and again restart.. this keeps on happening.
Anyway i decided it was time to install a new rom and it would solve my problems.. I put my phone in Xrecovery and tried to mount the SDcard but the memory card just wont show up on my computer for some reason..
Anyway then i took a card reader and put the roms on the root of my card and then put my card back into my phone.. After that i tried to install the custom zip but it gives me the error E: Cant mount /sdcard (device or resource busy)
WTF?
Can someone help me im clueless !!!
Okey i flashed the 2.1 Rom now.. Do i need to root my phone again? Do i need to install xrecovery again? :S
Hi if you flashed the stock 2.1 ROM then yes you will have to root the phone again and install xrecovery. I reckon you should update to 2.3.3 first using either flashtool, PC companion or SEUS which ever you prefer. Then root using flashtool 0.4.2 and install xrecovery using flashtool as well. Good luck hope this helps.
What rom do you use when phone froze? And why you flash first 2,1 rom? You must first flash 2.3, then root, install xrecovery, (unlock bootloaders if you want) and thats all
I was using 2.3.3 Wolfbreak i think ! Not sure.. Updated a 2-3 months back.
I flashed 2.1 because i read somewhere thats what people did when they got the mount sdcard problem in xrecovery.
Sorry if i sound like a noob but whats a bootloader and why would i unlock it?
Anyway im downloading 2.3.3 first and will then install xrecovery. I want to install one of the MIUI ROM's.. Which one should i install? Which one is the most stable and has the most features?
Unlocked bootloaders just allows change boot logo I think) And for miui I'd suggest oddie or a1exander roms, they are stable and everthing work
Sorry for bad english
Thanks !!!
Installing 2.3.3 right now. Will let you guys know if there's any problem.. Thanks again
Before you install xrecovery don't forget to root first I would use flashtool 0.4.2 for this check out the link http://forum.xda-developers.com/showthread.php?t=920746 The bootloader as i understand it is basically the very start of the bootup loads the kernel then the ROM loads. The white Sony Ericsson logo when you fist power on the phone is generated by the bootloader. A couple of reasons to unlock the bootloader are to load custom kernels faster an they are more stable this way instead of the bootloader bypass method. Some ROM's e.g Cyanogenmod need an unlocked bootloader I believe. BEWARE I heard of people bricking there phone during the unlock process i would do plenty of research before unlocking. I would have a read of these threads before unlocking your bootloader http://forum.xda-developers.com/showthread.php?t=1254087 http://forum.xda-developers.com/showthread.php?t=1253277&highlight=unlock+bootloader+proper+method . I still have not been game enough to unlock my bootloader yet phone still under warranty thought. Good luck nothing wrong with being a noob we all start some where I am a noob too just with lots of reading and experimentation behind me.
Thanks !
Okey well im going for this:
1. Flash 2.3.3 Rom using flashtool
2. Install xrecovery using flash tool
3. Install Alexander's miui by using custom zip in xrecovery (right?)
That should be it? Do i really need to unlock boot loader? Dont really want to mess anything up
Firts root and then install xrecovery Don't install Alexander miui version 11, wait tomorow. 11v have many bugs:/ Don't afraid nulock bootloaders, just read instructions, not rush and everything be okay
Forry for bad english.
2.3.3 installed.
Trying to root it, But flashtool's root button is greyed out ?
Installl drivers from flashtool folder?
Done but still greyed out.. Also enabled USB debugging and unknown applications in the phone
Here http://forum.xda-developers.com/showthread.php?t=1196808 read instructions and be happy You must first install kernel I think:/
How do i install kernel ?
You don't need to install a kernel yet you have the stock kernel installed already from the 2.3.3 install. Have you put the phone in flash mode before you try and root it. If not put it in flash mode then try and root. Note the op posted is using the old version of flashtool so it will look a bit different.
In that post all write just read You know how put phone in flash mode?
Nope.. The root option in flashtool is just greyed out no matter if im in flash mode or not.
My kernel is 2.6.29-00054-g5f01537 [email protected] #1
Android: 2.3.3
Baseband: 2.1.71
Buildnumber: 3.0.1.G.0.75
I hope i flashed the correct 2.3.3 rom? I had a 2.3.3 rom by the name of x10_2.3_aro.ftf I flashed that.
Don't understand. Just follow intructions in my link. No matter that flashtool version old, it makes their job.
Sorry for bad english.
OK I think you need to go back to basics download Sony PC companion and update or repair your firmware from there that way you know you had the right version of firmware for your phone. Firmware can be carrier dependant. Once this is done then try to root using flashtool
Sent from my X10i using XDA App
Owner of a Sony Ericsson Neo MT15i, first i unlocked the phone trough the Sony website, then installed Cyanogenmod 7.2.0-RC1 trough fastboot, experienced quite a few bugs and some features missing, so currently i have installed a generic firmware MT15i_4.0.2.A.0.42 trough flashtool (temporary).
So i've been searching on google as well as on XDA forums but can't find a clear lead where to get or how to install the official SE MT15i Android and Kernel (either the links are dead because they once were hosted at Megaupload or the download speed is in bps not kbps because the files are being hosted in China) - i don't want any Super-Cool-Over-The-Top-MegaPerformance-ROM ... i just wan't the the phone back to stock ROM(mainly because i'm looking forward to selling it in the near future).
I also had an idea about creating a image or ROM from another MT15i Neo from a colleague at workplace but there are no pointers that i could find how to do it or if it would work as a stock version. I'm sure that there has to be a way to get the official updates to work - it can't possibly be that impossible... can it?
http://forum.xda-developers.com/showthread.php?t=1409352
One little advice that can be very helpful in future: when you install custom roms, first make a nandroid backup via CWM.
Just connect phone to pc and run pccompanion or sus....
That will get your phone back the latest version (For your region) and your phone will be as it was "Out of the box" again.
gregbradley said:
Just connect phone to pc and run pccompanion or sus....
That will get your phone back the latest version (For your region) and your phone will be as it was "Out of the box" again.
Click to expand...
Click to collapse
to update via PC Companion,you need to relock bootloader,otherwise you'll get a message like "You can't upgrade because you have modified software in your phone".
Ah! So that's why it didn't work! Cheers! From the moment when i made the first post till now have had the version posted in the second post, so i only need to relock the bootloader.
Hello,
I flashed the most recent MiniCM9-3.0.2 ROM with nAa ICS kernel and followed all steps carefully. Everything works except i get no service. I can find the service network (vodafone) but i cannot connect to it. I've tried to go back to stock kernel and miniCMPro 21 and i get no service as well. Any help?
Thanks
nvm... I figured it was a bootloader-issue, but i guess since you can still find the network your gsm is still working.
In any case, you're on stock rom, try relocking your bootloader and see if you can connect to the network then (Restore-button in S1-Tool)
Hi,
I'll try to restore and see if it works.
Thanks for the help.
Hi,
I restored and reinstalled CM9 and now everything is working! Thanks
i am in exactly the same boat, just flashed same rom and same kernal and now no service, i also was under the impression if i unlocked the bootloader it unlocked phone to all networks but my virgin sim would not work either, the phone was originally on orange and my orange sim worked before i done this, what do i need to do guys just flash back stock rom, if so where can i find this, thanks!
You need to use PC Companion or SEUS from Sony Ericsson to repair your phone, and then relock your bootloader with the Restore-button in S1Tool.
There is a big difference between sim-unlocking your phone, and boot-unlocking your phone.
The first one will allow you to go on other networks, the second one will allow you to flash a custom kernel.
If you want to unlock your bootloader, follow the tutorial and make sure your simlock-certificate is compatible, otherwise, obtain an EMMA/IMEI code from your provider to get your phone on other networks. In that case you can unlock your bootloader too.
There are plenty of warnings in the bootloader-unlock tutorial to prevent you from bricking your phone, if you don't understand the options that are there, don't mess with your phone.
iv tried using the repair function of pc companion but it just says no updates available for this phone, and i cant seem to find SEUS can anyone point me in the right direction please.
think i made a mistake last night though while messing, i locked the bootloader back up, had the capital R where needed, but i had a custom rom but i had flashed back the stock kernel by mistake, now the phone sits with sony ericsson on screen and doesnt do anything else, been that way for hours now, any help really appreciated!
Hi
I had the same problem. The easy way is to put the phone back to stck and start all over again. You can find SEUS here (search on google)
update_service_setup-2.11.4.11.exe
After install it just follow the instructions. When it says no update was found just click next anyway. it will restore the phone. And then start from that point:
unlock bootloader, flash kernel and install new Rom imediatly after flash kernel. DONT LET YOU PHONE START WIHT OTHER ROM OTHERWISE IT WILL GET THE SMA PROBLEM! Put the ROM file in the SD card and after install new kernel go imediatley to CWM and install the ROM.
It should work!
cheers mate iv just downloaded it and run it, this is all that happens once i restart in flashmode, any ideas
Go to the Development section for your phone in this forum and try to find a ROM that is based on the stock rom (I think you should still be able to nstall xRecovery on your phone and enter it), then flash it just like you would other custom roms.
how can i go about installing xrecovery mate as i cant access phone the way it is, i can get it into flashmode, using the power and home button then using back quickly after i restart, iv tried flashing a custom kernel back onto it too from flashtool but it gives an error and doesnt do anything, if only i could get that kernel back on at least just to get it out of the freezing!
Open flashtool and connect your turned-on phone through usb, if it says phone connected with usb-debugging, you can use flashtool to install xrecovery and reboot into that.
SmG67 said:
Open flashtool and connect your turned-on phone through usb, if it says phone connected with usb-debugging, you can use flashtool to install xrecovery and reboot into that.
Click to expand...
Click to collapse
its saying device connected with usb debugging off, lol, what now, is there anyway to flash back to stock via flashtool as i have stock e10i 2.1 uk stock rom, if so how mate, appreciate the help! iv really jumped in at the deep end and got all confused, used to flashing samsungs!
are you on the X10Mini (E10, robyn), or X10MiniPro (U20, mimmi)?
SmG67 said:
are you on the X10Mini (E10, robyn), or X10MiniPro (U20, mimmi)?
Click to expand...
Click to collapse
its the x10 mini mate, e10 model!
ok hang on
this is caused by your x10mini conditions just flash stock with flashtoll and if you want checke it with seus it will have a repair button
Theliakos said:
this is caused by your x10mini conditions just flash stock with flashtoll and if you want checke it with seus it will have a repair button
Click to expand...
Click to collapse
im unsure of how to do that mate,do i need to put the stock rom inthe firmware folder same as i did for the kernel as i tried but it didnt show up, any guidance is much appreciated!
big-hol said:
im unsure of how to do that mate,do i need to put the stock rom inthe firmware folder same as i did for the kernel as i tried but it didnt show up, any guidance is much appreciated!
Click to expand...
Click to collapse
Check your inbox
ok guys this is what im getting when trying to flash stock rom via flash tool
In my region (PK) ICS is still not released and don't know how long it will take so I am thinking to get a stock ICS rom and manually flash it so any links, docs, suggestion will be appreciated.
Hey man,
First, download the following files :
1) 6.1.1.B.1.54 FTF
2) Flashtool
Then, after installing Flashtool, copy the FTF to the firmware folder inside Flashtool install directory
After that, run Flashtool and select the Flash button (Select Flashmode)
Select the firmware, and you can select the options on right side. If you've got a ST25a,then tick the "Ignore Baseband" option because that firmware is for ST25i.
Then, it will say Connect Phone. Turn off your phone & wait 5 - 10 s.
Then, holding down the VOLUME DOWN (not Back Key) Key, connect the USB cable and wait for it to flash
Then, just wait for the Flashtool to finish its job
Thanks Min3r I will try it, seems straight forward to me, just to confirm that it do not require boot loader unlocking and rooting as it is an official firmware!
Nope Bootloader unlocking is required only for flashing non-stock Kernels. So, Custom ROMs,Rooting and alot more are possible provided its based on a stock kernel
Thanks. Let me try it now.
How can I revert back to 2.3.7 if I face issues with ICS?
Just get the GB ftf and flash it using Flashtool. Simple as that. But I doubt you'd face any cause everyone here's been using it fine
Thanks, do you have any link for stock GB same as you refered me for ICS?
My only concern is broken tethering which I am not using so far
Apparently its an issue with .54 roms.. I think it works fine in .10 though
Try this out for GB GB India
Yep seems like it works in .10 but do you know what advantages .54 has over .10?
Thanks for GB link but its .184, is there .188 ftf available?
Check this thread out : B.1.54 All details available there
and .188, try searching this forum.. It would be here somewhere dude..
I'm trying to flash the ICS ftf file, but I always get the missing drivers error.
I installed the drivers with the flashtool-drivers app (flashtool, fastboot and XP Sola/U/P drivers).
What can I do ? Please help, I'm tired of GB.
// looks like restarting the computer solved the problem. It's flashing as I type.