HELP!!!!!
Hello, this is my first post.
I need help with this...
I have installed MiniCM 2.1.9
and then flashed the kernel ,and the google apps.
I have rebooted the phone after finished installing,
the nAa-freedom within- kernel logo shows up,
and then the blue android on the skate rolls in, stops in the center, and the circle around it appears, it starts loading, and *BAM* it stops:
i have attached a picture of how it looks.
HELP PLEASE!!!!
PS:Sorry for my bad english, and the quality of the image.:
Flash the kernel first, do a full wipe within CWM and then flash the ROM (and any extras). If you dont flash the kernel first then you might be using an outdated version of CWM which might not properly install it.
Sent from my U20i using Tapatalk
I made a backup(pre-caution)
I have wiped data with CWM and flashed the rom again,
Thanks for your help
SOLVED
It works fine now,i wiped data with CWM,flashed the kernel first,than installed the ROM,rebooted,and everything works now.I think the sequence and the gapps(do NOT install gapps!)was wrong.Thanks!
Related
Hi guys,
i have decided that i install new ROM to my device.
Device :
xperia x10 mini pro, U20i, 2.1-update1, 2.1.1.A.0.6
My device is ROOTed - i have used SUPER ONE CLICK, i have installed BUSYBOX from the Market, and i have got xRecovery.
I have downloaded ROM - http://forum.xda-developers.com/showthread.php?t=1059361
I have copied it to my SD card, turn off the phone,turn on the phone,on the SE logo i have touched BACK button => i get into xRecovery.
I have update .zip file from sd card- everything done. Reboot device. (i have tried- wipe cache, -factory reset, -reboot, but problem still last)
Device has turned off, turned on, there was SE logo, than just black display, so i have waited long time - about 20-25 minutes, but there was still just black display, phone simetimes vibrated but nothing else.
I have restored my system using xRecovery.
Please help me somebody,i want this ROM but i can not do that.
Sorry form my english.
Do it again staring with any back ups ,,, if not seus when you get to a rom choose a more stable rom ,,, like slade 5 or cm7
Sent from my U20i using XDA Premium App
Install CM6 V6 after installation CM6 V5
Problem black screen
Hi i have the same like friend under me.
I trying install cm6 v5 and latter cm6 v6 .
but this is not change anything.
during booted after sonyericsson logo, i have black screen and sometimes vibrate.
sorry for my language, but my national language is polish, english is learning
Hi guys !
I have installed v.5 .That version works correctly. I have tried to install v. 6 after v.5 but that brokes again at SE logo after reboot.
I want to ask, how get i Hotfixes to the system ? I have downloaded Hotfix .zip files, but i do not know how i should apply that.
Thanks
You can install Hotfixes through CWM or xRecovery. Just go to option instal custom zip and choose the Hotfix you want.
NihilisticWonder said:
You can install Hotfixes through CWM or xRecovery. Just go to option instal custom zip and choose the Hotfix you want.
Click to expand...
Click to collapse
I have tried to do it. But it can not install Hotfix, that notices some error, i have tried two, or three Hotfixes, but that still notices some error.
I have read that there can be some problems with installing .zip files, i have found it in FAQ ( http://forum.xda-developers.com/showthread.php?t=1066824 )
"
I CAN'T INSTALL CUSTOM.ZIP ON CWM RECOVERY BUT WITH XRECOVERY I CAN...
This script it's amend script, so it need to be translated to edify script for work on CWM recover
"
This should be my problem, i think...
How can i translate script to work in CWR ?
Thx
BOSSno.21 said:
Hi guys !
I have installed v.5 .That version works correctly. I have tried to install v. 6 after v.5 but that brokes again at SE logo after reboot.
I want to ask, how get i Hotfixes to the system ? I have downloaded Hotfix .zip files, but i do not know how i should apply that.
Thanks
Click to expand...
Click to collapse
Well V6 is clockworkmod recovery flashable only!
galvic said:
Well V6 is clockworkmod recovery flashable only!
Click to expand...
Click to collapse
So, i do not understand. That brokes in CWM when i have tried to apply Hotfix. CWM notices some script problems.
I am going to try it again later.
As you did with the rom, use EXACTLY the same procedure except the wiping (wipe cache, battery stats, factory reset).
That's how you install a hotfix
Hi all.
Hope everyone is having a good day!
Lets start: in simple words, it appears I've got two CWM installed. Know it sounds crazy but this is how it looks.
I run Villain 2.4.2 with nynmphetamine 2.1.3 kernel and "some" CWMs
Previously I had also Villain but on CFRoot kernel that preloads a custom CWM
What I've done:
I tried to install CM7 "easy" way so installed ROM manager and when it asked me if I wanted to flash CWM with the newest one I pressed "yes" and stupidly overwrote it. Then downloaded CM7 and when ROM manager attempted to boot into CWM android logo with an expression mark appeared and the phone hung. I rebooted into recovery and it showed me I run CWM 4.0.0.2 (i think that's the custom from CFroot) but the ROM manager says I've got 4.0.1.5.
When I tried to install CM7 via 4.0.0.2 the installation itself went fine but the phone stucked on Samsung logo during post-instalation booting.
Could you give me an advice on how to sort this out? I mean to get properly set up kernel and CWM after some serious messing up
I'd be grateful for any help.
Cheers.
chalger
I dont know if its possible to have 2 CWMs (maybe app version is different), but this happens with CM7. You should wipe dalvik, factory reset, flash cm7 and boot. Phone will get stuck, shut down long pressing power, reboot in cwm and reflash (no wipe needed). CM7 should boot now.
Hello.
After running for months cm7 old baseband with no prob, today i decided to try cm9.
So i grabbed my copy of Arjen cm9, latest nightly, gapps, installed it. Then upgraded to new baseband 20G using LGMDP.
The phone booted, all fine, but there was no network. So i tryed reinstalling the new baseband, same story. The third time i reinstalled the new baseband, phone booted with stock lg gingerbread. So i reinstalled arjen cm9, but phone remained stuck at boot animation at the firts rebooot before installing google aps.
Then i decided to restart the process once again and redoing root, recovery etc. These are the step i took:
1) used KDV to reinstall lg stock ginger with 20G baseband.
2)rooted from gingerbread, installed rom manager, installed CWM.
3) reboot in CWM, wiped all, formatted with ext size 256mb and swap size 64mb.
4) copied rom and gapps, wiped everything another time.
5) installed arjen cm9, re booted, again stuck at boot animation.
6) re formatted, re wiped, tryed another rom ([2012.6.5] MIUI PORT by DHK).
7)rebooted, again stuck at boot animation.
No matter how many time i reboot or how many CM9 version i try, after the new baseband upgrade only the lg stock gingerbread seems to boot without remain stuck at boot animation.
Please help me with this new baseband/ cm9 thing, because i seem the only one that doesn't get it!
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Madpiercing said:
Hello.
After running for months cm7 old baseband with no prob, today i decided to try cm9.
So i grabbed my copy of Arjen cm9, latest nightly, gapps, installed it. Then upgraded to new baseband 20G using LGMDP.
The phone booted, all fine, but there was no network. So i tryed reinstalling the new baseband, same story. The third time i reinstalled the new baseband, phone booted with stock lg gingerbread. So i reinstalled arjen cm9, but phone remained stuck at boot animation at the firts rebooot before installing google aps.
Then i decided to restart the process once again and redoing root, recovery etc. These are the step i took:
1) used KDV to reinstall lg stock ginger with 20G baseband.
2)rooted from gingerbread, installed rom manager, installed CWM.
3) reboot in CWM, wiped all, formatted with ext size 256mb and swap size 64mb.
4) copied rom and gapps, wiped everything another time.
5) installed arjen cm9, re booted, again stuck at boot animation.
6) re formatted, re wiped, tryed another rom ([2012.6.5] MIUI PORT by DHK).
7)rebooted, again stuck at boot animation.
No matter how many time i reboot or how many CM9 version i try, after the new baseband upgrade only the lg stock gingerbread seems to boot without remain stuck at boot animation.
Please help me with this new baseband/ cm9 thing, because i seem the only one that doesn't get it!
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Click to expand...
Click to collapse
What do you see when you're booting your phone?
Fastboot Mode? Stuck at LG logo?
Sent from my LG-P500 using xda premium
EDIT: now after 30 min stuck at miui boot animation, i rebooted the phone and this time it started the cm9 logo, then an icon of battery charging appeared in at the center of the screen and then phone dead! What the hell is happening guys? This is driving me mad, lost the the entire morning and until now trying to get this working.
Click to expand...
Click to collapse
when you see the battery logo..hold power button again..and your phone will boot normally..
If dont works so go to recovery a and from cwm reboot system..other way to start the phone..
LG-P500-ICS-4.0.4
I've done it guys.. I had to install again gingerbred and 20G with KDZ, then re rooted, donwloaded rom manager, installed CWM, and then i installed again CM9 and it worked.. dunno what's gone wrong last time, i have done the exacts same steps and now it works!
Thanks for the help
Hey,
I wanted to update my Gingerbread MIUI and picked an ICS version cause I didn't look properly.
Now I'm stuck at the xiaomi logo and also can't get into recovery to do anything.
Is there a way to fix this?
I appreciate your help guys!
Damnation
No recovery (assuming you're not pressing the wrong key combo) = flash stock rom in Odin to get a 'clean slate'. Then you can re-root your phone & try Miui again if you're still game.
sounds like
it sounds like you never deleted all data, dalvek cache or reset phone before you installed new rom.
just a thought
its aslo usefull to install rom, when finished while in rec. mode find fix permissions, clickn run, reboot then.
THEN istall updated gapps recommended in rom thread (if rom doesn't have gapps (google apps) preinstalled, romthread will tell you)and repeat fix perm. clickn reboot. dont make the mistake of doing it All at once ive found this helps
damnation333 said:
Hey,
I wanted to update my Gingerbread MIUI and picked an ICS version cause I didn't look properly.
Now I'm stuck at the xiaomi logo and also can't get into recovery to do anything.
Is there a way to fix this?
I appreciate your help guys!
Damnation
Click to expand...
Click to collapse
Yeah, and don't forget to do a factory/data reset after u flashed any ROM, custom or stock. If you do that the phone wont get stuck on the boot screen(S logo). Happened to me xD
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Try flashing 4.4 rom
Sent from my SM-N9005 using XDA Free mobile app
do you a full wipe every rom you try to flash ,it doesn;t work like that ,and search in forum there's a guide how to flash ,at least can you enter in recovey mode or download mode now ?
If you want to remove binary count search for triangle away
ok i will try flash to 4.4 but wait please a few minutes, i just uploading vid on youtube to show you all that "working" rom, i know how installing roms but its dont work, i know how to wpie and when do it bus seorusliy it not work...
and to use triangle away my phone must working, and thats problem.. i will show you that on vid just wait
and yes ofcourse i can enter in download mode and in cwm, just i say its only one rom with can boot.. stock and other roms stuck on sign "samsung i9300" stock roms stops at samsung logo and one of cyanogenmod starts up almost normal (u see what is wrong in vid) and is error with com.android.phone
VID is avalibe in first post
try to redownload zip file and try again ...maybe it should work . Happens to me once the same error ,i just rebooted in recovery mode ,did a wipe dalvik cache/ cache a factory reset and all went fine .
also you can try this https://www.youtube.com/watch?v=1iCq7fSqIqk (read the comments also)
switelolo124 said:
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Click to expand...
Click to collapse
You can download this ROM. It is 4.3 for Poland (Plus)
Please read the guides on how to flash properly. If you flash the wrong way, then you can end in trouble.
did this Rom has kernel inside ?
and guys... i KNOW HOW INSTALLING ROM, i just write like that to make it shorter
@edit
not working i told u guys its not working only cm11 without wiping plus stock aroma rom kinda working...
did is some way to installing firmware with odin but emerygency mode ? i doing that in galaxy s2 mini but i know its diffrend samsung.. but maybe.. ?
Did u try flashing rom without sd card ??
Sent from my SM-N9005 using XDA Free mobile app