Related
With apologies to Roebeet, who provided a response to an earlier inquiry about this - - but I couldn't interpret what to do - I am posting here to see if anyone who has flashed to TNTlite 4.4 has had a problem with connecting their PC to the gTab and being able to then see the sdcard drive and contents. When I connect now, the tab shows a "USB Connected" and then a USB Debugging Connected" message, but nothing can be seen on the PC, except, a removable disk (F and when that is hilighted the message "please insert a disk into drive F" shows up.
Any advice, reference to a thread that addresses this, or other guidance would be greatly appreciated.
Thanks!
Pinckneyite,
This is a new one to me and I read the forums pretty thoroughly.
Since the drivers that communicate to the PC are built in, the only
suggestion I can think of is to re-flash the ROM and see if it comes
up.
If not, then I would re-flash back to stock
http://forum.xda-developers.com/showthread.php?t=861950
and see if it works there. Along the way, you may need
to load CWM (ClockWorkMod) in case you need to clear/wipe, etc.
Do some loading and testing the let us know what you find out.
Rev
It doesn't automatically mount on your PC. You have to pull down the notifications menu and select "USB Connected." That will give you a dialog that will allow you to "Activate" USB file transfer.
K J Rad said:
It doesn't automatically mount on your PC. You have to pull down the notifications menu and select "USB Connected." That will give you a dialog that will allow you to "Activate" USB file transfer.
Click to expand...
Click to collapse
Ahhh. That worked. Guess I hadn't even looked there. Thanks!
You have no idea how long I spent trying to figure that out when I had that problem... ;-)
K J Rad said:
You have no idea how long I spent trying to figure that out when I had that problem... ;-)
Click to expand...
Click to collapse
Well maybe, then, you know what the "USB debugging" option on that notifications menu means? I see it there as an option to turn it off or on. Leaving it on seems to do nothing to handling file transfers, etc. What is it for? Thanks.
USB Debugging is a development tool. It's not necessary for average daily functions but a few apps out there require it. It won't hurt to just leave it on.
TNT (Lite) is different thatn AOSP based mods, that's correct - you just have to click on the "!" icon.
roebeet said:
TNT (Lite) is different thatn AOSP based mods, that's correct - you just have to click on the "!" icon.
Click to expand...
Click to collapse
Ahh. That was a !, not a 1. That was my problem the first try.
After installing CM-9 KANG, i havnt been able to see my files in windows on my device like an external SD card...I didnt install the gapps and wanted to install those now but i cant find a way to trasfer the ZIP to my device...can someone give me an idea...guess I could try downloading the gapps zip directly over wifi, but still Id like to have access to the tab from windows.
Thanks for input,
Don't know how many times this has been answered but one more time:
Go to Settings - Storage - click on the three dots in the top right corner - USB Connection - check MTP. There is still no default transfer mode selected in CM9 KANGs.
I'am using JellyBam for quiet a while, and cant use the USB storage option other way then through the recovery.
At first I thought its a bug, but i'ts now the 3.0.0 STABLE version, and still when I plug the phone to my PC, the USB Storage option doesn't pop up.
Am I doing it wrong or something, or is it really impossible to mount USB storage through this rom?
What u already tried?
Did u activate "USB debugging" in settings>dev?
Did u flash another kernel?
What the main thread of JellyBam says, did u already ask there?
CHEERS
Sent from my GT-I9100 using xda premium
Hi Vad88,
As Hannibal226 said, you should be posting this in the main Jelly Bam thread here.
Here, many doubts will be posted mainly on the technical issues not on specific to some Custom ROMs.
BTW, here is the solution for your question.
Goto--> Settings--->Storage-->Menu(press this on your phone),
then a popup shows up saying, "USB computer Connection", select that, in that link, you'll get some options.
There you need to tick on "Mass Storage".
That's it, you are done. now whenever you connect your mobile to computer, a notification shows up, USB storage as we used to see in Stock ROM. From there you can drive yourself for connecting the mobile to system & explore the phone storage contents.
Regards,
Hereticnine.
hereticnine I LOVE YOU
really I will have your children
I cant ask in the main JellyBam tread because its in the development forum which I cant write in, because I have less then 10 posts, I searched there and couldn't find anything.
Thanks hereticnine, I followed your instructions and it works!
Appreciate the responses! :good:
hereticnine said:
Goto--> Settings--->Storage-->Menu(press this on your phone),
then a popup shows up saying, "USB computer Connection", select that, in that link, you'll get some options.
There you need to tick on "Mass Storage".
Click to expand...
Click to collapse
JellyBAM has so many options combined, a quick thing like this can quickly become quite the scavenger hunt.
Even though this post is old, google still uses it to help people like me.
Switch to USB Mass Storage Mode as default - Could anyone kindly teach me how to do it at this new rom ? only connected as MTP media which is not user-friendly when I copy videos to external sd card.
I tried to search "mass storage" within the thread but no answer for that.
did the jellybam thread just vanish?
yup
JCobra72 said:
yup
Click to expand...
Click to collapse
did they move to another forum?
I wonder why, is it because he is accused of taking element from other roms again? I say who cares, his latest release is so perfect on S2, the roms that may accuse him have issues with their roms, his rom has no issue, therefore that is different enough for me!
He has his own website anyway: http://www.modmydroid.net/jellybam/
UBS Mass Storage
chen9003sl said:
Switch to USB Mass Storage Mode as default - Could anyone kindly teach me how to do it at this new rom ? only connected as MTP media which is not user-friendly when I copy videos to external sd card.
I tried to search "mass storage" within the thread but no answer for that.
Click to expand...
Click to collapse
System Settings >
Storage >
Press home button left side button
Then appears usb computer connection
Select it and enable usb mass storage
metalgearhathaway said:
I wonder why, is it because he is accused of taking element from other roms again? I say who cares, his latest release is so perfect on S2, the roms that may accuse him have issues with their roms, his rom has no issue, therefore that is different enough for me!
He has his own website anyway: http://www.modmydroid.net/jellybam/
Click to expand...
Click to collapse
This is BAD .... Really BAD...
Taking element from other roms is not bad if you First ASK DEV permission and mention his name on your Change Log.
gkdada67 said:
System Settings >
Storage >
Press home button left side button
Then appears usb computer connection
Select it and enable usb mass storage
Click to expand...
Click to collapse
Sorry, i couldn't get what you mean by " Press home button left side button "
everything i jneed to do --> Wireless and Network > More .> USB Utilities > Connect Storage to PC
just want to know how to set the usb mass storage by default , thanks ~
Lost_Animal said:
This is BAD .... Really BAD...
Taking element from other roms is not bad if you First ASK DEV permission and mention his name on your Change Log.
Click to expand...
Click to collapse
What a pity then, because either way, his 6.4 rom is more stable than those roms that he has incorporated features from.
There are certainly some elements of this "open" development community I do not comprehend that's for sure! Glad I'm a user and not a rom compiler!
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
kazador07 said:
Hello Friend!! I also have the same problem with this phone. but I have not been able to enter the menu. as you could enter the menu of the z828? Thank you
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
I fixed the zte avid plus z828 frp problem!
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
please do!!!!
Yerhope said:
Dont mean to double post but after a week of trial and error I solved the problem. I bypassed the FRP and Hard resetted the phone. Phone's working 100% now. I can probably post a guide somewhere I guess if highly requested.
Feel free to close the thread as the problem is solved
~
Click to expand...
Click to collapse
Hello yerhope!
from your last report on zte z828 frp bypass, i understood that you finally fix the , not able to access the Developer option nor access the factory reset. I am very keen to know how you did it.
I am a victim of this same circumstance.
guide please?
cant click reset my self
Hey, I would like to highly request the tutorial....
Furthermore, I'd like to say I've poured over these sort of sites, rephrased my questions, etcetc all trying to get the same things accomplished, getting past the google password, and yet you with your quick clearly stated actually step by step explanation were the one to get me the farthest in fixing this problem. :highfive:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
can root and remove with gcpro.
thats what i did. with this, even wen u get into settings and tap factory reset, ntn will happen.
re: zte z828 resolved problem???
digitalchaos1980 said:
Are we even sure he did indeed get in? He hasn't been back to post instructions on how to get further. I am having the same issue, and have been trying every way possible. If I get in, I will make sure I post how.
Click to expand...
Click to collapse
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
xdauser9981 said:
He said he resolved problem but put no feedback so others can benefit, I really doubt he resolved the problem of bypassing or unlocking or rooting his phone, he probably slammed it on the floor and resolved the problem that way. We don't need people like that here. I will try it when I get a zte z828 from someone that has the same problem, I will post feedback if I am successful or not, so by July 15, 2016, I should now if it is possible.
Click to expand...
Click to collapse
He did get in. I did get in myself but when i tap factory reset nothing happen.
(Security patched)
Maybe he did resolve it like i did.
Root and remove it with gcpro
Thats what i did.
On some ZTE phones (has worked on 1 but not another for me), you can use the emergency dialer to dial:
*983*987#
This will lead you directly into factory reset options (if it works).
Solution worked on Acer Iconia B1-850 Tablet
Yerhope said:
Yeah I'll make a short guide I can try to post screenshots later but for now i'll try my best to guide you to the point where I am.
1. Go through the setup until you get to the google verifying part.
2. Open up your keyboard and hold down the comma to access the gear which will allow you to get into the google keyboard settings.
3. Once you're at the google keyboard settings go to Text Correction.
4. Then go to Personal Dictionary and select English (US) or whatever you have there.
5. Then click on the search button and just type random letters and hit search is what i did to get to this next step.
6.. You should be able to type in the letter "g" and you should see something called google voice typing
7. click that and go to Text-to-speech.
8. Then click the blue gear next to google text to speech
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
14. delete whatever is on the search and type in settings the option to access the settings should pop up on the bottom as a suggestion.
15. click that and now you're at the settings.
From here on i assume you know how to access the about phone and turn on developer settings but this is the problem you can turn it on but you cant access the developer menu you can just click it and nothing will happen. same for trying to reset the phone from the back up and reset menu.
if anybody knows what the case may be please let me know i'm constantly trying to find the solution to this whenever i have the free time but so far no solution has came up. i am able to download apks by instead of typing in settings on the google search i type in file manager and simply transfer over the apk through my pc onto the phone. that i can do without usb debugging becasue my pc picks the phone up as a portable device.
Click to expand...
Click to collapse
Solution!
Yerhope said:
So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.
Click to expand...
Click to collapse
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
o12VOLTSo said:
Okay, I spent more time than i care to admit on getting through this frp. I have z3x and a few other utilities and i use them when i can, but i don't honestly lay hands on ZTE very often. Anyway, you do NOT need GC or any other box--
so following the last poster's steps (credit to yerhope):
9. click install voice data
10. you should see 3 dots on the top right hand corner open that and click open source licenses
11. once you're at this part just simply hold a line down as if you were going to copy it.
12. you should see about 4 options on what you want to do with that line like copy or share it search it on the web.
13. what you want to do is click search, its the fourth option.
this is where he leaves off... and where i pick up.
14. Download "quickshortcut maker" apk to your computer (or copy from apk extractor on a phone or any other method..
15. Select z828 in my computer and copy quickshortcut maker to downloads
16. On the phone, after clicking the search button, clear the browser box and type in "file manager" - it will show up just below. select it
17. Go to downloads in the file manager and select quickshortcut maker
18. install the app, blah blah blah
19. Once in the app, search "google account" you will have several pop up
20. Select the one that says "email and password" when you do, it will ask for a password to an account you aren't sure of.
21. click menu on top right - Browser sign in is the option - click it
22. Sign in to your email and account
23. Once you are signed in, press and hold power for a soft reset (restart)
24. Proceed as usual to wifi page and BOOM!
25. Profit. not much though, cuz its still a ZTE.
Click to expand...
Click to collapse
Does this mean you have confirmed this on ZTE?
Yerhopes solution worked for my zte lever
Follow yerhopes solution after step 15 while in settings go to backup and reset make sure back up data is off then factory reset erase Everything phone will reboot old owners info gone no need to download anything worked for 2 Zte levers i bought from ebay.
Bought a EE Jay Tablet (also a ZTE tablet) that had FRP enabled, easiest way I could do it was
1. connect to wifi, get to the previous account required screen.
2. open the keyboard and hold the @ symbol and open the keyboard settings.
3. top right corner press the 3 dots and choose help and type in apps in the search box.
4. access the app settings screen via the link from the help section then goto all and launch settings app
5. enable unknown sources in security and return to app settings screen and launch chrome this time or any browser.
6. goto http://rootjunkysdl.com/files/?dir=Apps and download this file com.sika524.android.quickshortcut.apk
7. you may get a download notification that the file has finished if not go back again to the app settings screen and all again and launch downloads app
8. you will now see the file download open it and install and then open the app
9. in the quick shortcut app search for google account and choose email and password and select try
10. now the google accounts manager has launched, in the top right corner press the 3 dots and choose browser sign-in
11. sign in with a google account and once done it will close and go back to the quick shortcut maker.
12. you still won't have access yet but all I done was reboot the device and continued the setup, this time there was no errors or required sign in and had full access.
Hope this helps someone, this was basically a copy of this video which may be helpful https://www.youtube.com/watch?v=GKdVvBSIb0M
Idk wat im doing but watever I do cant make crap any worse so I went under security and theres a place says trusted agents I clicked that and it said google smart lock so I turned it off im hoping this works guys ill let u know
yes
Arykit said:
Does this mean you have confirmed this on ZTE?
Click to expand...
Click to collapse
I used this method, personally, for zte Avid I believe. Yerhope's solution works for some firmwares prior to firmware i was on. i'm sorry, i do not recall that at this moment as it was some time ago. if Yerhope's solution is not effective for you, then progresss to my steps that pick up right where previous solution left off. so once again, YES, this worked on my device, did not test for others. my understanding is kingo can acquire root access in a special way as well that will allow you to adb clear frp. looking for commands? i do not have them sorry.