Is anyone using Juice Defender (Free, Lite, or Ultimate) successfully with Da_G's OC Kernel?
I am still on the Stock ROM.
I flashed to the OC kernel this morning, after having serious battery issues with the Rooted Stock Kernel. I uninstalled JD last night to see if it made a difference?
Battery Life is dramatically better on the OC Kernel without JD installed.
Related
I previously got awesome battery life on my phone. I've made some changes recently, and I wanted your help narrowing down what is causing the decreased battery life.
I network unlocked my phone. I'm leaning towards this as the culprit. If this is the problem, how do I go about locking my phone back to T-Mobile?
I flashed the new Bionix ROM. It was very slow for me, so I flashed the non-overclocked Dragon kernel.
I wanted to flash my phone back to stock and start reinstalling things, so I did that, and then flashed the new Loki ROM. Same battery issue.
I started using ADW Launcher EX.
When I go into the battery info menu, it shows that "Cell Standby" is using a large amount of battery.
Thanks in advance for your help.
Firmware version: 2.2
Baseband version: T959UVKA6
Kernel version: 2.6.32.9
Build number: Loki 1.2
If you're still using the dragon kernel that's the problem. If you're not I'd recondition the battery.
Thanks for the fast response. I'll go ahead and try out supercurio's kernel for a bit and see if Dragon was the problem.
Just use stock kernel
Sent from my SGH-T959 using XDA App
Definitely use supercurio. It's based on stock, all of the other kernels are compiled from non-vibrant source and inherently have poor battery life.
dragon is as goon on battery as voodoo gets unles u overclock dragon to 1.4 which is overclocked by default to 1.4 so if you are not running setcpu to bring back cpu frequency bact to stock 1ghz , it will chew up your battery like 1.4 ghz should
http://forum.xda-developers.com/showthread.php?t=931351 get SETCPU from previous thread iv madde its below first post , and i think its a paid app so dont tell any one i gave it to you for free ;p
All - whats the best kernel for battery life/performance ratio?
Currently using faux 1.6 kernel - superfast but battery drains real quick - whats everyone else using?
I was on the stock kernel for awhile with Ken's Alien ROM. Battery life wasn't great, then switched to Faux's kernel. Didn't notice much of an improvement. Im trying out Kholk's kernel, which has gotten good reviews for battery life. This is my first full charge on it, so we'll see. Im currently at 85% after about 3 hours of moderate to heavy usage.
Sent from my Alien Atrix
From my experience edgans is best
Sent from my Motorola Atrix 4G MB860 using Tapatalk
any more replies folks? Hows Kholkds Kernel - what radio are you using?
Cheers
Hi guys!
What can I do to get better battery life?
I'm now using devoid #froyo-final, franko kernet 19.4 and SetCPU (480-691 smartass, screen-off: 320-320 smartass). What am I doing wrong?
What are the best profiles for SetCPU? What do you guys use for "screen off"?
What is the best ROM + kernel to use.
I used mik's CM port, but it drains battery kinda fast.
I don't want to have a battery that lasts one week, I just want 48 hours with moderate using.
How can I do this?
Thanks!
Use 480/729 MHz and 480/480 use with the screen off with the kernel minmax 19.4 franco
NO0B said:
Hi guys!
What can I do to get better battery life?
I'm now using devoid #froyo-final, franko kernet 19.4 and SetCPU (480-691 smartass, screen-off: 320-320 smartass). What am I doing wrong?
What are the best profiles for SetCPU? What do you guys use for "screen off"?
What is the best ROM + kernel to use.
I used mik's CM port, but it drains battery kinda fast.
I don't want to have a battery that lasts one week, I just want 48 hours with moderate using.
How can I do this?
Thanks!
Click to expand...
Click to collapse
Dont use screen off profile,it causes wakelocks and reduces battery when idle.
NO0B said:
Hi guys!
What can I do to get better battery life?
I'm now using devoid #froyo-final, franko kernet 19.4 and SetCPU (480-691 smartass, screen-off: 320-320 smartass). What am I doing wrong?
What are the best profiles for SetCPU? What do you guys use for "screen off"?
What is the best ROM + kernel to use.
I used mik's CM port, but it drains battery kinda fast.
I don't want to have a battery that lasts one week, I just want 48 hours with moderate using.
How can I do this?
Thanks!
Click to expand...
Click to collapse
Firstly, when you're using smartass, there is no need to set a sleep profile. Smartass, by default, sleeps at a lower frequency than the max frequency. Just set min and max freq and leave it as is. No profiles needed. The profiler app itself may consume resources scanning for CPU usage.
If you want best battery life, go for Mik's 6.5.7 with the latest franco's kernel/fserve's version of franco's kernel. Do a clean install, clear your battery stats, etc (I assume that you know the drill). Manage your apps and the auto-syncing feature properly and you'll have good battery life for sure. And, pls give some time for the ROM and kernel to get accustomed to your phone. You'll get good battery life gradually.
Good luck
yes do what gkarthik16 said you can also use v6supercharger script
don't use setcpu use cm7 inbuilt feature with smartass governor(I am using smartassv2 governor because I am on mik's 6.6.1)
from settings >application>running services>stop the app or uninstall the app you don't need
also charge when battery is below 20%
Just set it at [email protected] smoothassV2,no need for profiles
Sent from my LG-P500
For mi, te cm7 ia like the worst rom. Battery line is really low.
Sent from my LG-P500 using xda premium
What is 'moderate usage' to you, and how long does your battery usually last?
Cm has a bug which causes wakelocks at.first. gets better in awhile
Sent from my LG-P500 using xda premium
Try AGA-ROM with setcpu 480/729 smartass. You will need new baseband. Here is how to flash new baseband > http://forum.xda-developers.com/showthread.php?t=1149530
stargate20 said:
Try AGA-ROM with setcpu 480/729 smartass. You will need new baseband. Here is how to flash new baseband > http://forum.xda-developers.com/showthread.php?t=1149530
Click to expand...
Click to collapse
Tried it. It sucks.
48 hrs with moderate usage wont be easy. if you play games too forget it in any rom. im on cm7 6.6.1 with franco kernel and i'd be lucky to get more then 24 hrs but i do play lots of games and browsing and wifi on for 18 hrs a day . i found that using automation software like tasker or green power to toggle data or wifi gives a great boost to battery though.
Hey I am thinking about using the htcdev unlock on my 3D
What would yall say is the best kernel for performance and battery life?
also is there any scripts I could run or any tweaks I could do to get great battery life?
I know on my Evo 4g i ran the supercharger script and the vipermod script but im not sure if those would still work effectively on the 3D...
Any kernel with underclocking will do the trick. I am running Deck's Sense ROM and Ziggy kernel. It supports 1.8 ghz over clock. I use that and the phone is super smooth. Even with setCPU set to lag free, I get 12-18 moderate use. With setCPU on powersave (384mhz) there phone is just a bit laggy, buy I have gotten over 3.5 days of battery life with minimal usage.
nubie said:
Any kernel with underclocking will do the trick. I am running Deck's Sense ROM and Ziggy kernel. It supports 1.8 ghz over clock. I use that and the phone is super smooth. Even with setCPU set to lag free, I get 12-18 moderate use. With setCPU on powersave (384mhz) there phone is just a bit laggy, buy I have gotten over 3.5 days of battery life with minimal usage.
Click to expand...
Click to collapse
That's impressive. I'm on Olympus and can go all day as long as I have good service or connected to wifi. Some people are getting pretty great numbers out of it, but I'm sure it depends on underclocking of course
All,
Just a quick question:
I am currently using Da_G's OC Kernel and have seen drastic improvements in battery life compared to the stock rooted kernel. I removed JD last night after noticing severe drain on the stock rooted kernel.
Is anyone using the OC Kernel with JD?
If so, is it the free version or paid versions (Lite or Ultimate)?
I used it on my previous device and had great success with CM7.