[Q] bandaid for asus pime wifi - Asus Eee Pad Transformer Prime

Hello to all, I'm wondering if other is anyway to connect my phone to my home router then broadcast that signal to my prime. So instead of using my data from my 3g I would just be rebroadcasting my home wifi signal. I think this would be a type of band aid until the prime gets some kind of fix for wifi farther than 20ft. I thought of this when I went outside and my prime had no signal but my phone did. I thought it would be nice to piggy back that wifi signal my phone is picking up on. I have a tethering plan on my phone that works fine but when I'm right outside my house I hate to use data when my wifi is simi-free.
Thanks to all for any response.

I've been reading about mifi cards as alternative but then thought " is their anyway to buy a unlocked (I'm assuming their locked to carriers) mifi card and instead of it picking up 3g or 4g date can it be modded to pick up the closest or strongest wifi signal and then use its hotspot ability to transmit it." I'm not sure but I would assume that it would have a pretty good receiver in it, at least better than the prime in its current state.
If these are crazy ideas... I can take it I'm a big boy

fd4101 said:
Hello to all, I'm wondering if other is anyway to connect my phone to my home router then broadcast that signal to my prime. So instead of using my data from my 3g I would just be rebroadcasting my home wifi signal. I think this would be a type of band aid until the prime gets some kind of fix for wifi farther than 20ft. I thought of this when I went outside and my prime had no signal but my phone did. I thought it would be nice to piggy back that wifi signal my phone is picking up on. I have a tethering plan on my phone that works fine but when I'm right outside my house I hate to use data when my wifi is simi-free.
Thanks to all for any response.
Click to expand...
Click to collapse
What about a bog standard wireless access point or repeater, as that way you do not have to worry about connecting to yer phone?

Not sure if this I correct but is a bog standard router just a better router? Also I think a repeater would probably work I just can't seem to be able to find a battery operated small one (pocket sized). The problem I'm running into is that as a firefighter most of our firehouses are brick and concrete with steel mixed in, not the bet setup for wifi. My phone is able to pick up the wifi from pretty far away even though the signal is poor to fair but my prime is not. So I need something that I can slip into my pocket that will pick up the weak signal and boost or simply give the prime a closer access point. We rove to different stations almost everyday so it needs to be something portable. Hopefully this clears up my situation.
Thank you for your reply.

I think you cant connect and broadcast the wifi signal at the same time with your phone. You either use the antenna and hardware to receive a signal or you use it to broadcast but not both at the same time.
Correct me if i'm wrong though

Well that might kill my cell phone idea.... their has to be something that can be done. Besides just fixing the prime.

I have done what you have said but it does depend on what cellphone you currently own. I have a Samsung Galaxy Captivate with an ICS rom and so my phone is able to transfers a Wifi connection right to my prime using Bluetooth.
Also, seems that when my phone loses WiFi connection and switches to 3g my prime auto disconnects so I don't use up my 3g bandwidth.

That sounds about what I need. You don't know if its only that phone? I have a inspire 4g running ICS from the dhd board. Is it app your using or built into your phone or ICS?

I am using the method that is built into the OS.
On your Phone:
Settings -> More... (under Wireless and Networks) -> Tethering and Portable Hotspot ->Bluetooth tethering.
Connect your prime and phone using Bluetooth.
On your Prime:
Settings -> Bluetooth -> Settings button beside your phone's name -> Internet Access
Then if it works the text "Use for internet Access" will switch to "Connected to devices for Internet"

Bluetooth tethering is super slow, there are some apps were you can tether your wifi connection while connected to another wifi network.
Can't think of the name of the top of my head, maybe someone else knows..

Bluetooth tethering worked with my phone so thank you. It does seem to be a lot slower but this was a bandaid for my prime so at least it works. Slow speed is better than nothing. Cost cutter It would be nice if I could find that app your talking about. Was it on the market?

Is it possible to have multiple bluetooth connections without fracturing thoroughput? I.e. run Tablet Talk at the same time.
You might also try a USB wifi stick if you have the dock or adapter.
Sent from my Transformer Prime TF201 using Forum Runner

Related

[Q] Wi-Fi Problems

Got a 32GB version.
All my other devices, windows laptops, android tablet connect up to my wifi fine. I am using WPA with AES (static IP). The HP Touchpad connects, but there is huge packet loss and it barely can keep a connection. It doesn't drop out per se, just cant get any data. Tried changing router settings, being 30cm from it etc. Still same problem. Any apps/tweaks i can try on the Touchpad?
Maybe it has something to do with Wi-Fi 802.11b/g/n with WPA, WPA2, WEP, 802.1X authentication;
maybe your router doesnt support it.
Just curious, are you running any of the Preware patches?
I am having a similar problem with my 16gb wifi model. Wifi works for a short while, then drops the signal. If I go in and turn off wifi on the device and turn it back on again - then it will work fine for another few minutes until it eventually drops the connection again.
I had this problem before I loaded any preware tweaks - and after as well. I am running the Govnah app to overclock to 1.5ghz and a few other logging tweaks.
I did some digging and it seems the most likely issue is a problem with the firmware of my router (D-link DIR-655), specifically the wireless n protocol. I am going to try updating my router firmware and see if that helps out.
By the way - no issues with my two laptops, dell streak 7, or my wii - so its definately isolated to be an issue specific to my touchpad/router combination...
I too am having problem. I don't drop the wireless connection, just a internet connection. All of a sudden nothing on my touchpad can connect to the internet, until I turn the wireless off and then back on again. Very weird. Everything else working off of my Dlink DGL-4500 works fine, except the touchpad.
I notice a few of you have Drinks, maybe thats the cause?
I'm running on FIOS and using Verizon's provided router. Works flawlessly. I've had one issue w/ WiFi, but a reboot solved that and has never come back.
I had problems with my dlink 615. TP would lose connection after 20 minutes or so. My wife's would do the same. My evo 4g had the same problem. I changed the router to the G only setting. I haven't had any problems with either TP since that change. The 615 uses draft N and was one of the early routers with this. I think it causes problems with some devices. I haven't really lost any speed either as the 615 will only connect at the speed of the "slowest" wireless card on the network, and I have some devices at g speed that are always on. I do plan to get a new router at some point.
jdexheimer said:
I had problems with my dlink 615. TP would lose connection after 20 minutes or so. My wife's would do the same. My evo 4g had the same problem. I changed the router to the G only setting. I haven't had any problems with either TP since that change. The 615 uses draft N and was one of the early routers with this. I think it causes problems with some devices. I haven't really lost any speed either as the 615 will only connect at the speed of the "slowest" wireless card on the network, and I have some devices at g speed that are always on. I do plan to get a new router at some point.
Click to expand...
Click to collapse
See my Touchpad is the ONLY device having problems, that's the part I don't get. All of my devices are wireless N as well.
TouchPad WiFi issues
Okay, I've tried every custom kernel available with almost the same results. I'm beginning to think my unit is defective, but I am hoping it is the custom kernels and not my unit. I haven't tried restoring the stock kernel but I suppose I should have before writing this. Anyway..onto the issue!
Does anyone have this problem where WiFi will randomly stop transmitting data? It happens most when I am browsing the web with the stock browser and almost all the time it is after the unit awakes from sleep. Sometimes it happens while browsing but the majority of the time it happens when coming out of sleep. WiFi is still on and connected to my network, but network activity is not there. The only way to fix it is by doing one of the following:
-Turn off and on WiFi
-Launch the HP software catalog.
The second method one seems to give the network a jump start and WiFi will begin working again and data will transmit.
Freeza I think that's a common slug, I read some other posts about it. Heck mine was doing it a lot, but not so much lately. I don't think you have defective device.
Sent from my HP Touchpad using xda premium
I have this issue too, on two Touchpads on the same wifi network (mine and my wife's). The issue vanishes on my portable wifi 4G hotspot and my much better office wifi network, so it's probably my router. I've ordered a MUCH better router, and if that kills the problem, I'll know for sure within a week.
I hear this is a common, but situation-specific issue.
phew.... Was getting worried for a bit there. Thanks guys. Hopefully the next webOS update can fix it
yoseth said:
Got a 32GB version.
All my other devices, windows laptops, android tablet connect up to my wifi fine. I am using WPA with AES (static IP). The HP Touchpad connects, but there is huge packet loss and it barely can keep a connection. It doesn't drop out per se, just cant get any data. Tried changing router settings, being 30cm from it etc. Still same problem. Any apps/tweaks i can try on the Touchpad?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1257357
I also have this problem. The wireless on the TP will stop working, even though it says it is connected. Disabling and re-enabling the wireless fixes it temporarily.
I also have an 802.11N wireless router. It is a Trendnet TEW-633GR. No other wireless device has ever had an issue with it, so I think the touchpad doesn't handle something properly...

[Q] Wifi Roam Free

I have one wireless router in my office (Linksys WRT54G) and another wireless router in my living room on the other side of the house (Linksys E1000)
Both are flashed with DD-WRT firmware. I have them setup to allow free roaming across/between the two.
Just about every wireless device I have will roam freely between the two routers except my Transformer Prime. I can be connected to the office wireless and have a great signal, walk to the other side of the house where the office signal drops off and pick up a much stronger signal off of the living room wireless but it will not drop the office connection and switch to the stronger signal in the living room.
I know the setup is correct because my Nexus S, Evo, wifes Evo Shift and iPad2 all will roam freely. Is there anyway to force the Prime to drop the weaker signal and switch to the stronger one? Thanks!
in ICS on my phone, there is a wifi option to avoid networks with weak signals. Presumably this is done by MAC and not SSID...but it's moot as ICS on the prime does not seem to have this option.
I had a similar setup, though most of the devices in my house are stationary, so i ended up reconfiguring to an Upstairs/downstairs SSID until i can invest in a more powerful router.
edit: like one of these! http://www.engadget.com/2012/01/09/amped-wireless-2012-lineup/
TF201 | XDA Premium
Hopefully this will get sorted with some new wifi drivers, or maybe after some devs start cooking up custom roms..
Dhyneland said:
I have one wireless router in my office (Linksys WRT54G) and another wireless router in my living room on the other side of the house (Linksys E1000)
Both are flashed with DD-WRT firmware. I have them setup to allow free roaming across/between the two.
Just about every wireless device I have will roam freely between the two routers except my Transformer Prime. I can be connected to the office wireless and have a great signal, walk to the other side of the house where the office signal drops off and pick up a much stronger signal off of the living room wireless but it will not drop the office connection and switch to the stronger signal in the living room.
I know the setup is correct because my Nexus S, Evo, wifes Evo Shift and iPad2 all will roam freely. Is there anyway to force the Prime to drop the weaker signal and switch to the stronger one? Thanks!
Click to expand...
Click to collapse
Did you ever get a solution to your roaming issue? I'm having the same troubles with my TF201. It refuses to switch to the higher signal access point even if I'm standing right beside it. The only way to switch is turning WIFI radio signal off the first access point when I go to the other side of the house. My Apply iPod seems to make the switch automatically.
Cheers.
P.S. I found a thread that discusses this issue at length and an app that appears to correct the issue
1) Thread: https://code.google.com/p/android/issues/detail?id=12649
2) App: http://android.googlecode.com/issues/attachment?aid=126490082000&name=MKermaniWiFiScanner-2.apk&token=Zwkr6Bx0HBP1XV4ZYFKiTAapeX8%3A1340206114901
I updated my post above with link to a thread that discusses the issue at length. It appears to be Android OS in general; specifically, ASUS and Samsung products.
I installed MKermaniWiFiScanner-2.apk posted above and it seems to work fine. The only complaint I submit to the developer was to remove the notifications every time the wifi scans for a different signal.
I called ASUS to inform them of the problem.
Anyone else having the same issue?

WiFi Accesspoint App?

So i got sick of having a crap connection on my TP downstairs in my house so pulled out my other modem and set it up as an access point, my TP wifi connects MUCH faster downstairs now and i am much happier.
I am wondering if there is a Application that will automatically switch between downstairs and upstairs connections ( Or what ever is stronger at that point )
Any ideas?
Or perhaps there is a way to make the modems appear as the same wireless connection so it can connect to both? Sorry im new to this access point thing.
Sent from my ADR6350 using XDA Premium App
your reply didnt seem to work REDSCARFACE?
ProficienTICS said:
So i got sick of having a crap connection on my TP downstairs in my house so pulled out my other modem and set it up as an access point, my TP wifi connects MUCH faster downstairs now and i am much happier.
I am wondering if there is a Application that will automatically switch between downstairs and upstairs connections ( Or what ever is stronger at that point )
Any ideas?
Or perhaps there is a way to make the modems appear as the same wireless connection so it can connect to both? Sorry im new to this access point thing.
Click to expand...
Click to collapse
Setup your second AP as repeater, then you don't have to worry about different connections.

[Q] Sprint Connection Optimizer Disables 4G?

So after the 3.16 update, I noticed my phone was not picking up 4G. After pulling my hair out to figure out why, I traced the problem to the Sprint Connection Optimizer being disabled. Turn it on, 4G toggles on with it, turn it off, 4G toggles off with it. The previous version of the Sprint Connection Optimizer did not do this. To confirm my suspicions I reset the phone to stock and observed the same behavior.
This is quite the pain in the ass as I don't want my phone connecting to WiFi networks that I marked "remember". In addition, I don't need my phone connecting to WiFi at work (which I use for work purposes under special circumstance).
My short term solution is to forget WiFi networks but this is rather tedious. With the Sprint Connection Optimizer toggled off, I am essentially locked out of 4G. I pay for Sprint's service and I insistent on using as much of their/my bandwidth as I chose.
Can anybody else confirm what is happening. My area has relatively strong 4G coverage, to the point where seeing 3G would be a rare occurrence. I need to make sure this isn't a problem on just my device before I roam my way out of my contract.
Super Tommy said:
So after the 3.16 update, I noticed my phone was not picking up 4G. After pulling my hair out to figure out why, I traced the problem to the Sprint Connection Optimizer being disabled. Turn it on, 4G toggles on with it, turn it off, 4G toggles off with it. The previous version of the Sprint Connection Optimizer did not do this. To confirm my suspicions I reset the phone to stock and observed the same behavior.
This is quite the pain in the ass as I don't want my phone connecting to WiFi networks that I marked "remember". In addition, I don't need my phone connecting to WiFi at work (which I use for work purposes under special circumstance).
My short term solution is to forget WiFi networks but this is rather tedious. With the Sprint Connection Optimizer toggled off, I am essentially locked out of 4G. I pay for Sprint's service and I insistent on using as much of their/my bandwidth as I chose.
Can anybody else confirm what is happening. My area has relatively strong 4G coverage, to the point where seeing 3G would be a rare occurrence. I need to make sure this isn't a problem on just my device before I roam my way out of my contract.
Click to expand...
Click to collapse
Why would you not want to connect to WiFi networks that you mark remember?....jw
If you have the option of your local WiFi versus 4G most times I'd expect someone to want to go with the WiFi... Only time you'd want to not is in places where 4G was better connection, which in those cases I wouldn't want to mark said WiFi networks as remember...
Ill try to mess with it here see how it effects my stuff as were rolling 4G a lot now...
Sent from my EVO using Tapatalk 2
In most cases work wifi won't let you watch porn at work man. Total pain in the a$$. We should be able to toggle our own connections. I will say wifi is better on battery and generally faster. However there's potential risk on wifi that someone could access your device. Extremely unlikely but a possibility none the less.
In my area we don't have lte yet and the other day after installing MeanBean I saw 4G pop up in signal bar then went away then came back. Haven't seen it since. I was so excited but I shouldn't get my hopes up. Sprints been saying 4G for a long time and still nothing. Only reason I stay is unlimited data and I live the HTC evo line.
You have a better chance of winning the lottery 5 times than someone accessing/ hacking your phone over wifi without you knowing about it.
Also there are great wifi apps that tells you who is on the network your on at all times.
#Root-Hack_Mod*Always=LTE
I have found that Comcast seems to throttle youtube traffic at certain times of the day, and I have a specific spot in my house where my wifi signal just completely drops (but still claims to be "connected.") I'm obviously going to want my phone to remember my home wifi connection, but I don't necessarily want to always be using it at home.
My situation may not be incredibly common, but it's a valid scenario where you may not necessarily want connection optimizer to run the show.
jesuspgt said:
I have found that Comcast seems to throttle youtube traffic at certain times of the day, and I have a specific spot in my house where my wifi signal just completely drops (but still claims to be "connected.") I'm obviously going to want my phone to remember my home wifi connection, but I don't necessarily want to always be using it at home.
My situation may not be incredibly common, but it's a valid scenario where you may not necessarily want connection optimizer to run the show.
Click to expand...
Click to collapse
The optimizer isn't your issue there though, as the mere fact of having the network remembered in the phone will cause it to connect to it whenever within range.... Its the fact you have a remembered WiFi network saved and you want to override that in a specific location when still in range of the WiFi... In that case the only solution is to toggle it off when you don't want to use it at that specific location in your house...
Optimizers doesn't just force you to connect to your local network that's remembered as the WiFi being on will do that itself already...
Sent from my EVO using Tapatalk 2
You can try disabling Sprint Connection Optimizer and try purchasing Juice Defender Ultimate. If you use its location service, it will only turn on wifi in places that you turn on the wifi antenna and remember them. And if it turns it on, you just manually turn it off until its trained.

WiFi Connection While At Work?

Here is why I bought my watch (primarily):
I'd like to be able to leave my Note 4 on my desk while I am working elsewhere in the building.....and I often find myself out of bluetooth range. I have searched around a lot and I cannot see if the wifi connection works the same as a Bluetooth connection, only with greater range. I do not currently have a sim card in the watch, and even if I decide to get one later, I dont really want it used if im only a few feet away from the edge of bluetooth range lol. I have read a lot about turning wifi off because it can interfere with remote (3g) connection but that isn't my issue (no sim card to interfere with). I just want to see if the wifi connection will work the same as bluetooth, only with greater range (same building, same network, just further away from my desk). Thanks.
Otherwise, LOVING the phone! Cant wait to try it out when Im back to work in January!
k.babymamma said:
Here is why I bought my watch (primarily):
I'd like to be able to leave my Note 4 on my desk while I am working elsewhere in the building.....and I often find myself out of bluetooth range. I have searched around a lot and I cannot see if the wifi connection works the same as a Bluetooth connection, only with greater range. I do not currently have a sim card in the watch, and even if I decide to get one later, I dont really want it used if im only a few feet away from the edge of bluetooth range lol. I have read a lot about turning wifi off because it can interfere with remote (3g) connection but that isn't my issue (no sim card to interfere with). I just want to see if the wifi connection will work the same as bluetooth, only with greater range (same building, same network, just further away from my desk). Thanks.
Otherwise, LOVING the phone! Cant wait to try it out when Im back to work in January!
Click to expand...
Click to collapse
Go for it wifi and call forwarding work very well. Remote connect. And your good to go January will be here shortly
Awesome thanks. So I'll get the same notifications Ala wifi as I will with BT?
k.babymamma said:
Awesome thanks. So I'll get the same notifications Ala wifi as I will with BT?
Click to expand...
Click to collapse
Yes your calls(Call forwarding and messages should work) your app updates will have to wait until your connected to bluetooth again
Thanks again!
Works for me too. I can be across town at the gym and it finds my phone at home as long as the watch is connected to wifi. Or data.

Categories

Resources