Related
** Notice **
There are 2 new kernels out K011 & K012 that are supposed to fix the deep sleep issue. If you are using a ROM that does not include one of these new Kernels please do not continue reporting deep sleep issues on them. Contact your ROM developer and get them to update the ROM with the new kernel. You could try another ROM with the new kernel's included or try the fixes mentioned further down in this post.
Mainly interested in now is reports of deep sleep issue with K011 and K012. Thanks out to everyone for their help with this bug hunt.
**********
Time to find out what those of us who have no deep sleep when running the custom kernels have in common. Even if you don't have any problems with Deep Sleep, your input would be appreciated as it could help eliminate items. If you can think of anything else we can add let me know and I'll update this Post. If possible please attach the same information as I have below as it would help greatly in determining what phones that absolutely can not get deep sleep with the FreeXperia Custom Kernel have in common. When posting possible solutions please indicate if you have had problems getting deep sleep before or not.
Update - I've added a count at the front of each line to count the number of submittal's for that line. As Items are eliminated from confirmed working deep sleep users I'll change the font color to red.
Update 2 - Thread has grown beyond my ability to keep up so I'm Just going to but a synopys at the bottom. If you believe that any of my assumptions there are incorrect, please PM me with the details so I can keep this information as accurate as possible
When reporting deep sleep problem or working include the following information
-------------------------------------------------------------
Phone Information from under battery
Sony Ericsson 10a
Type: AAD-3880074-AV AAAB
FCC ID PY7A388074 CB5
IC: 4170B-A3880074 10W20
Carrier Information
1 Rogers Wireless
GSM/GPRS/EDGE on the 850 and 1900 MHz bands
UMTS/HSPA on the 850 and 1900 MHz bands
ROMS tried using custom kernel with deep sleep issues
All FreeXperia ROMs from V014 to V021
[ROM][MAY24]BlackEditionHD_1.4_SE[Gingerbread 2.3.4]
Base ROM's tried
Rogers 2.1 stock ROM
Generic X10a build 2.0.A.0.504
Generic X10i build 2.0.A.0.504
Baseband's tried
Base .52
J's custom .52
Base .49
Base .46
Mini-Boot versions tried
V1
V2
V3
Factory Unlocked No
-----------------------------------------------------------------------
Here is what I've been able to determine so far
Majority of X10a have Deep Sleep problems
Majority of X10i are able to obtain Deep Sleep in some way.
So far everyone reporting unlocked phones have deep sleep (Incorrect, some don't have deep sleep)
Possible solutions if you are having deep sleep issues
1. Install V2 or V3 of the mini-loader from the custom kernel thread (DoomLoRD) Link
2. Try the Screen Off Fix (9Lukas5) Link
3. Manually select your network operator. (The Gingerbread Man) Link
4. After fully charging the phone to 100%, reboot after disconnecting (DoomLoRD) Link
5. Un-check automatic updating in date & time settings. (Temoi19) Link
6. (My_Immortal) has a solution If it's the dialer keeping your phone awake. Link
#5 is what finally worked for me. If any of these fixes have worked for you make sure to thank whomever came up with it by following the link to their original post.
** BREAKING NEWS **
J has just posted in his CM7 thread.
small progress
weems that we have found the deep sleep issue
not shure for now but we will provide an baseband togherther with J003
this combination seems to fix deepsleep for all testers
ETA 24h to be shure
Click to expand...
Click to collapse
The new Rom release is now available in the second post here. The Kernel included does not include overclock so if you want overclock you'll have to download K012 from the first post.
Here are the known issues posted by J in his thread. Please note the items for Deep Sleep and make sure to apply them before reporting any deep sleep issues.
KNOWN BUGS
-after reboot USB mass storage is not working if USB in plugged (unplug/replug USB to fix)
-if you still have deepsleep bug disable autotime update and automatic network
-deepsleep appers only when device is not connected to USB and corect baseband is used
Click to expand...
Click to collapse
Nice one buddy, great idea, i do not suffer from deep sleep so will edit my post later with my results, do you want the date the phone was manufactured.
I ALWAYS HAVE HAD DEEP SLEEP.
*Sony x10i
*Type AAd-3880056-bv aaac
*FCC ID PY7A3880056 CB5
*IC 41708_A3880056 10w13
*manufacture date year 2010 week 13
Using 3UK, HSPA, i have tried only Jerpelea's roms and had deep sleep on every one, my generic rom used is Sony Ericsson X10i_2.1.A.0.435_X10i and i use J's bb52 but it works also for me on bb49/sony bb52.
My only other point is that my phone was factory unlocked which may be another good point.
For those that don't know how to tell the manufacture date its under the battery and is shown like mine as 10W12, 10 being the year 2010 and W12 is week 12 of that year so April.
Apps that are very active in background prevent my device from going to deepsleep. Like MSN Talk Pro, PowerAMP and idk what more. I dont think its hardware related.
Sent from my X10i using Tapatalk
smartgardens said:
Nice one buddy, great idea, i do not suffer from deep sleep so will edit my post later with my results, do you want the date the phone was manufactured.
Click to expand...
Click to collapse
Great idea!! Now just where would I find that info?
PlayGunsta said:
Apps that are very active in background prevent my device from going to deepsleep. Like MSN Talk Pro, PowerAMP and idk what more. I dont think its hardware related.
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
I've actually tried this from a fresh install, with only CPU Spy installed and still I didn't have deep sleep. I'm saying it's hardware related as it could just as well be provider related.
GreatBigDog said:
Great idea!! Now just where would I find that info?
Click to expand...
Click to collapse
No idea sorry, Doomlord should know, it is under the battery somewhere, iv'e looked but can not make it out.
Hi guys, no deep sleep, no matter what
Edit: i received from Tim-br...
X10a Sensuous Black
Mobile Phone GSM/GPRS/EDGE 850/1800/1900
UMTS/HSPA band 1/2/5/6
Type: AAD-3880074-AV AAAB
FCC ID PY7A388074 BY9
IC: 4170B-A3880074 10W21
This is my post in J's thread...
I'm trying to fix deep sleep issue since J release v21 final, but no success.
My steps:
* usual (wipe everything, install update.zip, BB from package.)
* v2 e v3 miniloader (one in each clean install)
* repair with seus (after that clean install of bb from package and rom)
*flash many se 2.1 firmware (after that clean install of bb and rom)
* clean install and bb .49.
*battery calibration (full charge "off line", wipe battery stats)
*applied patch "when screen off "
*no apps installed (in each installation, JUST CPU spy from market, without gapps.
*another formatted sdcard
*wifi set to "when screen off " or wifi disabled.
*GPS and bt disabled.
*tried adw or arc launcher
No DEEP SLEEP. (Just work with airplane mode active)
Sent from my X10 using XDA App
michaeljordam said:
Hi guys, no deep sleep, no matter what
This is my post in J's thread...
I'm trying to fix deep sleep issue since J release v21 final, but no success.
My steps:
* usual (wipe everything, install update.zip, BB from package.)
* v2 e v3 miniloader (one in each clean install)
* repair with seus (after that clean install of bb from package and rom)
*flash many se 2.1 firmware (after that clean install of bb and rom)
* clean install and bb .49.
*battery calibration (full charge "off line", wipe battery stats)
*applied patch "when screen off "
*no apps installed (in each installation, JUST CPU spy from market, without gapps.
*another formatted sdcard
*wifi set to "when screen off " or wifi disabled.
*GPS and bt disabled.
*tried adw or arc launcher
No DEEP SLEEP. (Just work with airplane mode active)
Sent from my X10 using XDA App
Click to expand...
Click to collapse
Can you edit your post please to add the information asked for in the first post. We are trying to find something in common between all of our phones.
GreatBigDog said:
I've actually tried this from a fresh install, with only CPU Spy installed and still I didn't have deep sleep. I'm saying it's hardware related as it could just as well be provider related.
Click to expand...
Click to collapse
Yes I tried the same earlier, its just a matter of finding something we have in common, what it is I don't know.
Ok guys just done some testing cm7.03 and disappointing results, atleast for me.
Flashed bb.49, wiped everything in recovery. Fresh install of v21 and flashed v2 miniloader (no reboot in between) and signed into Google, allowed it to sync contacts no Google restore, no gmail, skipped install of Google apps. I have only installed CPU spy through market. Nothing restored through titanium.
My SD card is being a SOB and for some reason thinks I have no pics on my card, so possible issue there so it wont allow me to upload the screenies I just took but I managed 9 seconds of deep sleep after leaving the phone alone after my install as described for maybe about 2 - 2.5 hours. Baseband.49 with v2 miniloader isn't the answer I'm affraid atleast for me. Tomorrow will try same kind of install but using v3 mini loader.
Edit; no luck sorry
Sent from my X10 using XDA Premium App
GreatBigDog said:
Can you edit your post please to add the information asked for in the first post. We are trying to find something in common between all of our phones.
Click to expand...
Click to collapse
Edited, my last post. I see small diferences between you and me.
i don´t remember what bb came with phone, but i gues was .46.
I´ll try that now....
.49 don´t fix deep sleep.
How come we havn't asked those with deep sleep working to make a nandroid backup from xrecovery and upload it so we all can try it out?
SkyStars said:
How come we havn't asked those with deep sleep working to make a nandroid backup from xrecovery and upload it so we all can try it out?
Click to expand...
Click to collapse
Good idea, worth a try, i will do one tomorrow if nobody has done it before, think i will just check with Jerpelea first if that's ok by him.
Edit .... I will just pm a few with it rather upload it.
Sent from my X10 using XDA Premium App
Great! let us know how that goes.
I guess I'm a bit behind on what this even is.. What is the deep sleep? I know sleep mode and hibernation on a PC, but how do I know if my phone has it or does it?
CPU spy from market
highaltitude said:
I guess I'm a bit behind on what this even is.. What is the deep sleep? I know sleep mode and hibernation on a PC, but how do I know if my phone has it or does it?
Click to expand...
Click to collapse
Sent from my X10i using XDA App
Deep Sleep is sort of like Stand-by mode on your PC, it will wake up by its own to sync mail and do whatever and then go back to sleep. Without deepsleep you will lose 5-10% battery an hour just idling instead of just 1% for every 5-10 hours.
GreatBigDog said:
I've actually tried this from a fresh install, with only CPU Spy installed and still I didn't have deep sleep. I'm saying it's hardware related as it could just as well be provider related.
Click to expand...
Click to collapse
Ok just tired another fresh install on bb.49 this time using miniloader v3. Same testing.g environment as mentioned in cm7 thread. It seems impossible for me.
Ok guys just done some testing cm7.03 and disappointing results, atleast for me.
Flashed bb.49, wiped everything in recovery. Fresh install of v21 and flashed v2 miniloader (no reboot in between) and signed into Google, allowed it to sync contacts no Google restore, no gmail, skipped install of Google apps. I have only installed CPU spy through market. Nothing restored through titanium.
My SD card is being a SOB and for some reason thinks I have no pics on my card, so possible issue there so it wont allow me to upload the screenies I just took but I managed 9 seconds of deep sleep after leaving the phone alone after my install as described for maybe about 2 - 2.5 hours. Baseband.49 with v2 or v3 miniloader isn't the answer.
Sent from my X10 using XDA Premium App
Does anybody have an unlocked phone that they could try a sim card from another provider with? I've tried a 2nd one from the same provider but my phone is locked so I can't try a different one.
cm 7.0.3 - bypass v3
I tried a different simcard today and got deepsleep on it but I also had deepsleep with my usual simcard until it hit 15 % battery. Maybe losing deepsleep had to do with coming out of airplane mode on my device. I couldn't restore it and tried everything written in the other thread.
I gave the hardware - software cause some thoughts. I don't think it is hardware related. Sony would never upgrade to GB if it would be hardware related but I remember they said that they had some trouble with GB and the kernel.
Anyways I use the same apps on J's GB that I used on freex10 and i have absolutely no problems with deepsleep. The problem must reside within the Kernel, bypass or GB since lots of people even get the no deepsleep on a fresh install or lose it after some time.
Also drivers are not complete like camera and proximity. I would guess that there are still lots of incompatibilities that could also be the cause for something like that. Maybe some piece of hardware doesn't get addressed right or something. Figuring out what would be the cause exactly is way out of my league.
Just some 5 cents from me.
Regards
No deepsleep here for the past 3 or 4 versions of J's kernel (didn't try any before that).
Phone info:
Code:
Sony Ericsson X10a
Type: AAD-3880074-AV ACAM
FCC ID: PY7A3880074 CB5
IC: 4170B-A3880074
MoP 1233-8309.10 SI 1237-4604
Manufacture Date: 10W33 (August 2010)
Made in China
Network info:
AT&T
HSPA
WCDMA preferred
(Sorry, don't know where to find the same network info you posted).
ROMs:
Only use Z's FreeX10 B4 - Hotfix 1 (with CM settings)
Basebands:
.49
.52
J's .52
Bootloader bypass versions:
V1
V2
V3
Running services:
Code:
XPERIA Flashlight; Process: jp.co.telemarks.ledlightx10
LedLightWidgetService
Digital clock; Process: com.sonyericsson.digitalclockwidget
DigitalClockService
Market; Process: com.android.vending
AlarmService
HTC_IME mod; Process: jonasl.ime
HTC_IME mod
Misc:
FreeXperia Recovery
I keep Wifi/3G turned off unless I am using them, so they shouldn't be causing an issues.
Not using any SetCPU profiles/task killers/OC APPS/UV APPS/UV modules
I do get deep sleep in airplane mode (only tested for 2 minutes, but that was 2 minutes more than I've gotten any other time).
Perhaps a radio is keeping the CPU running?
hi guys. my story:
i am on holidays and i was running kitchen KH3 - stripped - untill i found some issues with gps so i decided to restore my cognition 1.51 from CWM - its clean version no extra added nothing special.
i charged the phone to 100% and left for dinner. after 10 min i came back to check the phone and it was extremly HOT (it was not connected to charger anymore) and the battery was on 50% already - yes only after 10 min! even i wasnt even touching the device! 3g was off, wifi was off, bluetooth was off, gps was off..only phone was on. nothing running - autosync off, weather update off. can someone help me locate the drain? the bluetooth was off and didnt switch it on at any stage.
check out the screenshots i made
any idea? how can bluetooth be the app if its off and i didnt switch it on at any stage.
Hunteres said:
any idea? how can bluetooth be the app if its off and i didnt switch it on at any stage.
Click to expand...
Click to collapse
adbd = ADB daemon (Android Debug Bridge) /sbin/adbd
You can see what is going on in a terminal, just run:
# ps
Are you in debugging mode? If you are not, something is not right... Time to flash your phone with a stock ROM?
yqed said:
adbd = ADB daemon (Android Debug Bridge) /sbin/adbd
You can see what is going on in a terminal, just run:
# ps
Are you in debugging mode? If you are not, something is not right... Time to flash your phone with a stock ROM?
Click to expand...
Click to collapse
yeh that may reproduce the adbd drain but i cant understand the bluetooth drain...i am not using it and its been off for ages... and phone without screen on getting hot and draining so fast - there is something going on - i restored the cogni one more time - so all records have been lost
thanks
You keep on telling us about Cognition ROM... Have you tried a stock ROM and see if you have any issues?
If you don't, personally I would post a report into dev's thread.
Hey all,
I just upgraded to ICS 4.0.3 LPB found here http://forum.xda-developers.com/showthread.php?t=1075278 and when i press the sleep button on the side of the phone the screen goes black like it goes to sleep, but when i press it or the home button to wake it up it skips the lock screen and goes strait to wherever i was before i locked the phone. This is the case with any kind of lock i select. also the setting that says how soon to lock the phone is always on lock instantly and i have tested it on others and no luck. Just wondering if anyone has any ideas on whats happened and how to fix it.
Cheers in advance
Try fixing permissions via CWM
Sent from my GT-I9100 using XDA App
Edit: My mistake
just wondering if you managed to fix.. i have the same issue and have tried fixing permission with CWM
i also hav the problem with ant ICS roms.. custom or official
See posts in other threads.
Odia said:
# echo -n ON > /efs/imei/keystr
# reboot
Click to expand...
Click to collapse
oinkylicious said:
There's plenty of other information in the threads dealing with these ROMs too. If only people would ask/read there, rather than making new threads for every issue they encounter.
(potential original source in T989 forums http://forum.xda-developers.com/showthread.php?t=1438451)
Click to expand...
Click to collapse
problem solfd!!
just do:
- Download "Terminal Emulator" app from market
- open it
- type into the command:
su
echo -n ON > /efs/imei/keystr
sync
reboot
- go in recovery mode : clear both cache and Dalvik and factory reset!!
you wil have your screenlock bak
Thanks
Thanks guys. I have been struggling with this lock screen issue for some time.
I have been using epinter's CM10.1 for Atrix 4g and following the Atrix 4g CM10.1 developer discussions. I am trying to get the camera flash to work. krystianp posted that one should extract from CM9, the files tcmd and tcmdhelp and put in /system/bin. But I cannot find a CM9 for the Atrix 4g (olympus) that has these files. Does anyone know where to find them? (Would have posted to the CM10.1 thread but don't have permission to do so.)
Search fo his cm9. It should have the libs you are looking for. Also, z's one shot cm10.1 might have them as well
Hit the damn thanks button instead!
Enviado desde mi MB860
Thanks
andresrivas said:
Search fo his cm9. It should have the libs you are looking for. Also, z's one shot cm10.1 might have them as well
Hit the damn thanks button instead!
Enviado desde mi MB860
Click to expand...
Click to collapse
Thanks... Downloading a CM9 from krystianp now. I was thinking of trying to get from z's one shot if that didn't work. (And yes I did hit the thanks button ). Now on to see if putting these files in /system/bin will actually get the flash to work. The only post I could find from someone who tried it suggests "no".
The problem I've been having is the flash not flashing at all when the "shutter" button is pressed. Instead the phone light comes on when I press the "focus" button and goes off when released (unless I've selected "no flash"). Seems like for other people the flash works but timing is off.
rhcohen said:
Thanks... Downloading a CM9 from krystianp now. I was thinking of trying to get from z's one shot if that didn't work. (And yes I did hit the thanks button ). Now on to see if putting these files in /system/bin will actually get the flash to work. The only post I could find from someone who tried it suggests "no".
The problem I've been having is the flash not flashing at all when the "shutter" button is pressed. Instead the phone light comes on when I press the "focus" button and goes off when released (unless I've selected "no flash"). Seems like for other people the flash works but timing is off.
Click to expand...
Click to collapse
I placed those files but flash is still not working, maybe you have better luck :fingers-crossed:
reply
Feche said:
I placed those files but flash is still not working, maybe you have better luck :fingers-crossed:
Click to expand...
Click to collapse
No, no better luck here. Copied files to /system/bin, changed permissions to 755, verified owned by root like other files in the directory, rebooted. Same behavior as before.
Did you try Krystianp's 12/31 kernel, which apparently has flash working for some? I downloaded it but haven't flashed it yet out of concern for the bad battery drain noted by someone.
rhcohen said:
No, no better luck here. Copied files to /system/bin, changed permissions to 755, verified owned by root like other files in the directory, rebooted. Same behavior as before.
Did you try Krystianp's 12/31 kernel, which apparently has flash working for some? I downloaded it but haven't flashed it yet out of concern for the bad battery drain noted by someone.
Click to expand...
Click to collapse
I currently have it installed, the flash with stock camera app doesn't work, but with CameraMX flash works fine. :good:
reply
Feche said:
I currently have it installed, the flash with stock camera app doesn't work, but with CameraMX flash works fine. :good:
Click to expand...
Click to collapse
For what it is worth, I just installed the 12/31 kernel and the flash with stock camera app now DOES work for me*, and the timing even seems to be OK. So someone ought to be interested in understanding the difference between your configuration and mine. (If anyone is actually following this, my sequence, executed over the past week or so, was a wipe/clean install of epinter's 12/11 CM10.1 rom, followed by his latest gapps, followed by a second flash of the 12/11 rom. Then this morning putting the tcmd and tcmdhelp files in /system/bin, with appropriate permisssions; and then finally flashing krystianp's 12/31 kernel.) Too soon to comment on battery life.
I think this kernel is supposed to be logging network disconnects (which I also seem to experience, about one a day, requires reboot to reconnect). Do you know where we find the resultant logs, and how (lacking permissions to post at the developers' site) we are supposed to deliver them to krystianp? I notice that, in response to a submitted log file, krystianp made a post about restarting the radio from a terminal, which didn't actually achieve a re-connection for the one person who tried it.
* small update: the flash works with stock app, but only if I do a spot ("touch") focus first. Small price to pay!
Great to know its working! As fir that "thanks" thing, it's my signature from tapatalk, nothing personal
As for the logs, on either cm9 or cm10 forum krystianp gave instructions on how to get those logs. One is dmesg and the other logcat, but can't remember exact commands
Hit the damn thanks button instead!
Enviado desde mi MB860
reply
andresrivas said:
Great to know its working! As fir that "thanks" thing, it's my signature from tapatalk, nothing personal
As for the logs, on either cm9 or cm10 forum krystianp gave instructions on how to get those logs. One is dmesg and the other logcat, but can't remember exact commands
Hit the damn thanks button instead!
Enviado desde mi MB860
Click to expand...
Click to collapse
Thanks --- so I found the relevant krystianp post on the logs:
http://forum.xda-developers.com/showthread.php?p=48954198&highlight=dmesg#post48954198
Specifically,
"To get kernel log just do (as root):
dmesg>/sdcard/kernel.log
And for radio log do:
logcat -b radio >/sdcard/radio.log
(Logcat works continuously so you might have to use ctrl+c to cancel it) "
Question is, what do I do with these logs? I could attach them to a reply at the developer forum if I had permission to reply....
Presumably I don't want to keep running this kernel with debugging turned on forever.
You can attach they here and nention krystianp so he get notified
Hit the damn thanks button instead!
Enviado desde mi MB860
reply
andresrivas said:
You can attach they here and nention krystianp so he get notified
Hit the damn thanks button instead!
Enviado desde mi MB860
Click to expand...
Click to collapse
Thanks, I will wait a couple of days so there is some accumulated info in the logs and do that. So far, no drops and one spontaneous reboot.
reply, to forward to krystianp
andresrivas said:
You can attach they here and nention krystianp so he get notified
Hit the damn thanks button instead!
Enviado desde mi MB860
Click to expand...
Click to collapse
OK, attached are kernel.log and radio.log (combined into the file atrixlogs.tar). Hopefully someone notifies krystianp.
Here is what they represent: I installed krystianp's kernel two days ago. Since then I have had two spontaneous reboots, and two more reboots that I initiated because in the first case the radio died; in the second case the radio didn't die (still had bars) but there was no data connection. In both cases rebooting restored full functionality.
Note in the case where the radio died, I went to no bars and stayed there; then when I tried turning airplane mode on and off, the network status symbol in the status bar disappeared (no triangle at all, rather than having an empty triangle).
Krystianp had suggested trying to stop/restart the radio from a terminal when the network drops; I did not try this as I was away from my computer and so did not have access to the instructions for the terminal command.
I hope these logs are of help.
rhcohen said:
OK, attached are kernel.log and radio.log (combined into the file atrixlogs.tar). Hopefully someone notifies krystianp.
Here is what they represent: I installed krystianp's kernel two days ago. Since then I have had two spontaneous reboots, and two more reboots that I initiated because in the first case the radio died; in the second case the radio didn't die (still had bars) but there was no data connection. In both cases rebooting restored full functionality.
Note in the case where the radio died, I went to no bars and stayed there; then when I tried turning airplane mode on and off, the network status symbol in the status bar disappeared (no triangle at all, rather than having an empty triangle).
Krystianp had suggested trying to stop/restart the radio from a terminal when the network drops; I did not try this as I was away from my computer and so did not have access to the instructions for the terminal command.
I hope these logs are of help.
Click to expand...
Click to collapse
have you tried turning radio on and off from testing tab from dialer *#*#4636#*#* then select phone info scroll down and there is a tab to turn radio off and on. saves time from a reboot.
You should have mention him by @krystianp . Not sure it will work from the phone
Hit the damn thanks button instead!
Enviado desde mi MB860
RE turning radio off and on
overboard1978 said:
have you tried turning radio on and off from testing tab from dialer *#*#4636#*#* then select phone info scroll down and there is a tab to turn radio off and on. saves time from a reboot.
Click to expand...
Click to collapse
No I haven't tried this. Does this do something different from krystianp's suggestion from Jan 2 at the 10.1 developer thread :
echo "shutdown" > /sys/class/radio/mdm6600/command
echo "powerup" > /sys/class/radio/mdm6600/command
which, per reply post from Feche (also Jan 2), succeeds in starting up the radio but not making a connection?
further update
rhcohen said:
No I haven't tried this. Does this do something different from krystianp's suggestion from Jan 2 at the 10.1 developer thread :
echo "shutdown" > /sys/class/radio/mdm6600/command
echo "powerup" > /sys/class/radio/mdm6600/command
which, per reply post from Feche (also Jan 2), succeeds in starting up the radio but not making a connection?
Click to expand...
Click to collapse
----------
OK I have a further update. Using the testing tab from the dialer gives me the option of turning the radio off; when I click it nothing changes -- in particular no option to turn the radio on.
When I try krystianp's echo "shutdown" and echo "powerup" commands, I get a system prompt back but no indication that anything has changed with the radio (though maybe it would be reflected in the radio logs). In any event, certainly no connection to the network.
With regard to including @krystianp in the mssage -- where am I supposed to include this (to get the log files to him)?
rhcohen said:
----------
With regard to including @krystianp in the mssage -- where am I supposed to include this (to get the log files to him)?
Click to expand...
Click to collapse
Doesn' t it appear as a link to his user profile? go there and select
Code:
send message -> send a private message to krystianp
.
I don't see a place to attach a file to the message, but you can link to this thread.
reply; and what is "uv"?
PolesApart said:
Doesn' t it appear as a link to his user profile? go there and select
Code:
send message -> send a private message to krystianp
.
I don't see a place to attach a file to the message, but you can link to this thread.
Click to expand...
Click to collapse
-------------
Thanks. Sending the logs may no longer be relevant; @krystianp posted a new kernel a day and a half ago. I flashed it yesterday, and so far, no radio drops. If I get any I will post another message with logs and also send a message to krystianp.
I notice in describing the new kernel he says he made changes to radio and UV. Can someone tell me what is UV? I tried a search in the 10.1 developer forum and a more general google search but find nothing useful (I suspect this use of "UV" does not mean "ultra-violet".)
As of today, he said the last kernel just adds more debug information. for me it didn't work for much time, with random reboots, probably caused by UV changes. UV is shorthand for "undervolting", an attempt to lower voltage to cpu (and perhaps some other devices) in order to preserve battery and generate less heat.
reply
PolesApart said:
As of today, he said the last kernel just adds more debug information. for me it didn't work for much time, with random reboots, probably caused by UV changes. UV is shorthand for "undervolting", an attempt to lower voltage to cpu (and perhaps some other devices) in order to preserve battery and generate less heat.
Click to expand...
Click to collapse
I saw today's post but didn't interpret it the same way. He had already said that this kernel, along with the one from 12/31, were for people with the disconnect errors (which I was getting), but when he posted the Jan 5 kernel he indicated there were changes to radio and UV; I thought today's notice was just reaffirming the purpose of both the 12/31 and 1/5 kernels.
The 12/31 kernel clearly did more than just turn on logging however, as it seems to have fixed the camera flash for many (including me).
And the 1/5 kernel seems to be working more stably for me -- 1 1/2 days now without a radio drop. Maybe just luck.
Hello,
I am having some battery problem.
I am currently on 10.3.12.0 (EU) build,( before that i was on 10.3.11.0 (EU)) which i flash directly via twrp, because i was not able to get the ota update, it always failed to install. Yes i followed the instructions for ota with magisk.
Since the 10.3.11.0 update, the battery get bad, i was getting around barely 10h sot, now it super bad- can not get even 3h SOT + there is massive heat issue 40° for no reason.
CPU frequencies are not loadable ( since the beginning ) in kernel auditor, gsm battery or any app. (see the screenshots)
It can be only monitored in real time, and it is showing for every scroll spikes to the maximum.
There is battery drain even in Stand by- 5-10 %.
What will you advise me.
Thanks in advance!
Some screenshots.
https://drive.google.com/folderview?id=16uFKuXgd1M5oR3F61j4pwTvsBzpnEUw3
Connect phone to the PC and:
- adb shell
- type in "su", allow root access on the phone
- type in "top"
- make screenshot/copy data, press ctrl+c
- type in "top -s 11"
- make screenshot/copy data, press ctrl+c
- post screenshot/data here
_mysiak_ said:
Connect phone to the PC and:
- adb shell
- type in "su", allow root access on the phone
- type in "top"
- make screenshot/copy data, press ctrl+c
- type in "top -s 11"
- make screenshot/copy data, press ctrl+c
- post screenshot/data here
Click to expand...
Click to collapse
Thank you for the fast answer!
I am using terminal emulator, because i am not able to use PC at the moment.
I will add later the proper data if needed.
Try to uninstall XDA navigation gestures app, reboot phone to reset stats and then check after 1-2 hours again with the same commands if the situation has been improved. Hopefully it's the only app triggering MagiskD (its CPU usage should be practically zero).
_mysiak_ said:
Try to uninstall XDA navigation gestures app, reboot phone to reset stats and then check after 1-2 hours again with the same commands if the situation has been improved. Hopefully it's the only app triggering MagiskD (its CPU usage should be practically zero).
Click to expand...
Click to collapse
Thank you !
I was just thinking about the same app, but i am using it since Sunday, and the problem is since the previous update( i was on the 10.3.10.0 only for 2 days)
But i am hoping this will solve everything!
Thank you again!
_mysiak_ said:
Try to uninstall XDA navigation gestures app, reboot phone to reset stats and then check after 1-2 hours again with the same commands if the situation has been improved. Hopefully it's the only app triggering MagiskD (its CPU usage should be practically zero).
Click to expand...
Click to collapse
Strange, the little cores are almost always maxed out 1804 Mhz.
But there is improvement since yesterday!
Now i am having around 1-1.2 %h drain.
By the way my old redmi 4 prime was way better, stand by drain- less than 0.5 %
alexandarpb said:
Strange, the little cores are almost always maxed out 1804 Mhz.
But there is improvement since yesterday!
Now i am having around 1-1.2 %h drain.
By the way my old redmi 4 prime was way better, stand by drain- less than 0.5 %
Click to expand...
Click to collapse
Could you upload the output from "top" commands somewhere else? Screenshots don't load via Tapatalk or web page of XDA, always giving me the error "can't load". Strangely the third picture loads fine everywhere
~1%/h doesn't sound so bad. My usual screen off usage is ~2%/h (wifi/data on, AOD enabled and often use of Whatsapp for web).On my wife's phone it's about 0.3%/h (wifi/data on, no AOD and only the "standard" apps).
_mysiak_ said:
Could you upload the output from "top" commands somewhere else? Screenshots don't load via Tapatalk or web page of XDA, always giving me the error "can't load". Strangely the third picture loads fine everywhere
~1%/h doesn't sound so bad. My usual screen off usage is ~2%/h (wifi/data on, AOD enabled and often use of Whatsapp for web).On my wife's phone it's about 0.3%/h (wifi/data on, no AOD and only the "standard" apps).
Click to expand...
Click to collapse
https://drive.google.com/file/d/19-wXJx249GfvroIe5eSDMPlHPRVvZyZL/view?usp=drivesdk - top
https://drive.google.com/file/d/18xJgNAl0Q7yi_gw-L7Z05jngqi1jaXLg/view?usp=drivesdk - top s11
I am not as worried about the 1%, as about the peaking processor, which is maybe leading to drain, and that not loading frequencies in every cpu tracking app( maybe kernel restrictions?)
alexandarpb said:
https://drive.google.com/file/d/19-wXJx249GfvroIe5eSDMPlHPRVvZyZL/view?usp=drivesdk - top
https://drive.google.com/file/d/18xJgNAl0Q7yi_gw-L7Z05jngqi1jaXLg/view?usp=drivesdk - top s11
I am not as worried about the 1%, as about the peaking processor, which is maybe leading to drain, and that not loading frequencies in every cpu tracking app( maybe kernel restrictions?)
Click to expand...
Click to collapse
Try switching to Facebook messenger lite at least for a while, the standard Messenger seems to be using an awful lot of CPU.
Which apps aren't working properly for you? I'll try them on my phone.
_mysiak_ said:
Try switching to Facebook messenger lite at least for a while, the standard Messenger seems to be using an awful lot of CPU.
Which apps aren't working properly for you? I'll try them on my phone.
Click to expand...
Click to collapse
Kernel adiutor on main screen showing " failed to load frequencies"
Gsam battery monitor cpu chart are not showing information about frequencies during the day.
About messenger, just one app force close did the work, now there is no cpu usage for that app.
Thank you for the guidance!
https://drive.google.com/folderview?id=16uFKuXgd1M5oR3F61j4pwTvsBzpnEUw3
alexandarpb said:
Kernel adiutor on main screen showing " failed to load frequencies"
Gsam battery monitor cpu chart are not showing information about frequencies during the day.
About messenger, just one app force close did the work, now there is no cpu usage for that app.
Thank you for the guidance!
https://drive.google.com/folderview?id=16uFKuXgd1M5oR3F61j4pwTvsBzpnEUw3
Click to expand...
Click to collapse
Kernel adiutor seems to be not working correctly, even for Mi A1 it required special version of the app. I guess it's not compatible with our device. Also it seems that it messed up the minimum CPU frequencies on my phone, try to uninstall the app and reboot, it might help "unstucking" your little cores.
About the CPU states, the issue is here:
testResults
file_not_exists:
/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state
It's either stock Android Pie behavior or Xiaomi forgot to implement this feature.
Edit: someone at Xiaomi probably really forgot to enable this.. https://android.googlesource.com/ke...ease/Documentation/cpu-freq/cpufreq-stats.txt
I am now trying to use messenger lite, because really Facebook messenger is doing something wrong, there are plenty of posts about that app triggering the cpu, or draining battery.
Now i think the problem comes from installing the latest security patch, but i didn't do anything wrong, the update via twrp is not something unknown, and i had the same problems in the previous version.
alexandarpb said:
I am now trying to use messenger lite, because really Facebook messenger is doing something wrong, there are plenty of posts about that app triggering the cpu, or draining battery.
Now i think the problem comes from installing the latest security patch, but i didn't do anything wrong, the update via twrp is not something unknown, and i had the same problems in the previous version.
Click to expand...
Click to collapse
The only problem, well 2 problems, I see with updating via TWRP:
1. you can't update with stock OTA if you ever decide to
2. you can't really say what's in someone else's TWRP backup unless you inspect it. There is always a small chance that someone tampered the file system and included some "extras". I'm not saying that it happened, but with stock fastboot images there's zero chance of modification.
_mysiak_ said:
The only problem, well 2 problems, I see with updating via TWRP:
1. you can't update with stock OTA if you ever decide to
2. you can't really say what's in someone else's TWRP backup unless you inspect it. There is always a small chance that someone tampered the file system and included some "extras". I'm not saying that it happened, but with stock fastboot images there's zero chance of modification.
Click to expand...
Click to collapse
In fact maybe that is the case, after typing tune2fs i can see that mount count is FIVE, i think that is why Ota has a problem.
Maybe i should flash stock fastboot image ?
Sapper Morton said:
Indeed, it has been tampered with; you should flash system image again, and if you use TWRP, be sure to follow as _mysiak_ explained, don't allow remount; also, check for other partitions if you want to restore manually, or for it to be easier, just run flash_all_except_data_storage, and do the OTA installation afterwards, the latest Magisk patched files are up, in the [ROOT] thread, by Typhus.
Click to expand...
Click to collapse
Hi, sorry for the dumb question,
Is flash_all_except_data_storage, a MiFlash tool command?
Or it is for adb?
Also which version of Mi flash will recommend? I found some tutorials to work with it but either they differ in the instructions or are not applicable in the latest version i found
Like the last fastboot rom i found is tbz file, not zip, as mentioned in some instructions.
alexandarpb said:
Hi, sorry for the dumb question,
Is flash_all_except_data_storage, a MiFlash tool command?
Or it is for adb?
Also which version of Mi flash will recommend? I found some tutorials to work with it but either they differ in the instructions or are not applicable in the latest version i found
Like the last fastboot rom i found is tbz file, not zip, as mentioned in some instructions.
Click to expand...
Click to collapse
1. unpack fastboot rom (tgz - Tar Gnu Zip)
2. unpack unpacked file again (tar). Then you will see flashing script files and images.
3. connect phone via fastboot
4. switch to partition A
5. run flash_all_except_storage.bat
6. wait for it to finish, phone will reboot automatically
7. congrats, you have fully stock phone now
The latest version of MiFlash should work fine, though I never used it. In each case you must make sure that you are on partition A.
hi again,
i would like to flash latest fastboot rom,(flash_all_except_storage.bat) because maybe have done something and have several unusual problem- heating again+40°C, while riding my bike, that cause and battery drain(less than 5 sot), super slow booting, so is the procedure the same as before? is the android 10 script have something different?
thank you!
P.S
Did it like before. Not sure if that fix my previous problem