am getting dis error..... help pls!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help..
does the phone starts charging itself when you connect it with your pc?
hotdude2411 said:
does the phone starts charging itself when you connect it with your pc?
Click to expand...
Click to collapse
thanks for yur response.... its start charging!
try to change the connection mode from MTP to MSC or vice versa.
make sure you have the latest pc companion installed. if it is there try to re-install the pc companion. also try to be connected with the internet while connecting the phone.
if your phone is able to charge it self, then the phone & cable is fine. its an issue with your pc / drivers installed in PC.
you also try to remove the pc companion, & let windows detect itself the phone as media device & then install the pc companion
hotdude2411 said:
try to change the connection mode from MTP to MSC or vice versa.
make sure you have the latest pc companion installed. if it is there try to re-install the pc companion. also try to be connected with the internet while connecting the phone.
if your phone is able to charge it self, then the phone & cable is fine. its an issue with your pc / drivers installed in PC.
you also try to remove the pc companion, & let windows detect itself the phone as media device & then install the pc companion
Click to expand...
Click to collapse
thanks buddy.... MuchLove!
Coonected in MSC mode....... lemme try change it back to MTP mode!
hehehehehehehehehe....
when i change to MTP, i get MTP device error when installing drivers.
its seems that this is an issue with the driver. i will try to find the find the driver pack for you, in the mean time try to re-install the pc companion, install the latest pc companion from sony website. try to remove the driver as well, & connect the phone,
also try to let it download the drivers from the internet.
did u unlocked the bootloader ?? hv u installed the correct USB driver for ur mobile phone?
hotdude2411 said:
its seems that this is an issue with the driver. i will try to find the find the driver pack for you, in the mean time try to re-install the pc companion, install the latest pc companion from sony website. try to remove the driver as well, & connect the phone,
also try to let it download the drivers from the internet.
Click to expand...
Click to collapse
thanks buddy.... i appreciate yur effort!
redtab said:
did u unlocked the bootloader ?? hv u installed the correct USB driver for ur mobile phone?
Click to expand...
Click to collapse
yeap... have unlocked BL! have install tha drivers buddy. it was working before, just stopped.
whalesplaho said:
yeap... have unlocked BL! have install tha drivers buddy. it was working before, just stopped.
Click to expand...
Click to collapse
"Here is the solution. Right My Computer and select properties. Goto device manager. And locate MTP USB Device. Right click and choose select update driver. Select 'browse my computer for drivers' and then choose "Let me pick drivers to install". You will get two options select the USB controllers and click OK and you are done."
source: i cant post outside links yet
I will try it later.
I think he found a solution long ago ..
MoonBlade said:
I think he found a solution long ago ..
Click to expand...
Click to collapse
hahahahahahahaha...... yhu right buddy but not a problem!!! dis might help others.
Related
I've tried everything. IT WILL NOT recognize my phone.
When trying to install the drivers it says the Authenticode does not have permission. I got the damn drivers directly from Android.com but it still doesn't think its authentic. Because of this, o cannot get the computer to recognize it as an adb device to root the phone.
I'm going nuts now. 2 days with literally 8 to 10 hours of trying with no success.
Can someone please please PLEASE help me?
I was having the same issue. Install PDAnet. Works like a charm. The program installs the drivers for you. You can uninstall the program after you get the drivers working if you'd like.
http://www.junefabrics.com/android/
rk0 said:
I was having the same issue. Install PDAnet. Works like a charm. The program installs the drivers for you. You can uninstall the program after you get the drivers working if you'd like.
http://www.junefabrics.com/android/
Click to expand...
Click to collapse
Didn't work.
During "installing drivers" it gave me this error (err=0xe000023f).
uoY_redruM said:
Didn't work.
During "installing drivers" it gave me this error (err=0xe000023f).
Click to expand...
Click to collapse
http://www.junefabrics.com/android/driver.php
Tried USBDeview, doesn't seem to let me uninstall anything even though it says you can.
Nothing appears to work.
This is what I keep getting, no matter what I do:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and what makes no sense is when trying to manually install new hardware, it SHOWS there are authenticodes for those drivers:
theres a way of turning off driver signature checks, try that
http://www.google.com/search?q=windows+7+disable+driver+signature
Are you on Vista or a Windows server version?
I had the same issue, turned out it was a hardware bug.
I sent it to the repair center at HTC in United Kingdom and i had it returned 5-6 days after, working and with locked bootloader
britoso said:
theres a way of turning off driver signature checks, try that
http://www.google.com/search?q=windows+7+disable+driver+signature
Are you on Vista or a Windows server version?
Click to expand...
Click to collapse
Vista.
I've tried a few of those suggestions and non of worked. Most involved the bcedit trick but its disabled or doesn't exist in the newer security updates.
Vista 32 bits or Vista 64bits ?
in hardware management console what do you see ? yellow question mark ?
Sometimes you need to go in it and find your device to check the HID number and copy it manually in the driver *..inf files to be detect by your OS.
I remembered doing this for my G1 long time ago (years).
If you can, get your hands on another n1 or android device to see if its a hardware problem with the phone, which i doubt. Also try a diff OS.
uoY_redruM said:
I've tried everything. IT WILL NOT recognize my phone.
Click to expand...
Click to collapse
This is for windows 7 64bits : http://tinyurl.com/2548qh4
take a look @ post #4
Hope you solve your problem !
In case you have Windows 7 you can try the following.
http://www.killertechtips.com/2009/...gning-in-windows-7-using-group-policy-editor/
Are you installing the usb drivers using the utility in ADB? If not, delete the drivers in hardware manager, and try installing them with the utility.
I had no problems doing this on Vista, but I prefer to use ADB on Linux.
Sent from my Nexus One using XDA App
hey .
maybe i´ve got something for you.
download my file here
install the binaries and then reboot (i said you don't have to, but i think in your case it would be better)
EDIT: is the debug function enabled in your device?
OK, after a few hours and still no success with Vista, I went to storage and pulled out my personal PC I built that hasn't run in a few years thanks to corrupt hard drives.
I spent 4 hours repairing and fixing the hard drives and SUCCESS, I got it to detect it on my Windows XP PC.
NOW! Still not working! In the command prompt, it shows adb devices as one connected but still when I do an adb push nothing happens. Just recycles the adb menu....
Any suggestions?
Your first mistake is using a PC that you know is not working properly. Try a known working pc.
Sent from my Nexus One using XDA App
Try using a Linux distribution. Saves a lot of time and headache.
or just reinstall your windows. win7 would be better than vista.
malevolent000 said:
Your first mistake is using a PC that you know is not working properly. Try a known working pc.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
The PC I'm using now IS working. It recognizes adb device but wont push the flash images or anything.
Hi guyz, i just bought sgs2 yesterday, previously i've been using SGS for the past 8 months
No matter what i do, i can't get Odin to detect my SGS2 in download mode.. !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but the weird thing is, it detects the phone if its in 'switch on' mode
These are what i've done:
- installed kies
- installed driver from kies
- factory reset sgs2
Info:
* i even reformat my Windows 7 (i thought it gets conflict with my previous SGS driver) and started everything from fresh but still fail
* Kies detects my phone, i can browse contacts etc. but Odin still fail to detect in download mode
* my phone is a branded O2 Ireland. Sim free
* i've tried on other PC but still fail
Please help me, i lost hope.. i just want to Root my phone
Did you try a different usb cable? And did you close all kies programs?
Alt+Crtl+delete >> Taskmanager >> Processes and terminate everything with kies in the name.
Did you try with usb debugging off and on?
Sent from my GT-I9100 using Tapatalk
You can try heimdall
Does windows see the phone drives via USB mass storage mode ..If not its your USB drivers and thats what Odin requires .
Tried a different Odin Odin3 v1.3 always worked for me .
jje
Lennyz1988 said:
Did you try a different usb cable? And did you close all kies programs?
Alt+Crtl+delete >> Taskmanager >> Processes and terminate everything with kies in the name.
Click to expand...
Click to collapse
i've tried this method before, but still no go i have plenty of micro usb cable and already make sure no kies is running.. thanks for your reply
iznee said:
Did you try with usb debugging off and on?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
yeah, i've tried this too.. thanks bro!
pulser_g2 said:
You can try heimdall
Click to expand...
Click to collapse
unfortunately i dont know programming
JJEgan said:
Does windows see the phone drives via USB mass storage mode ..If not its your USB drivers and thats what Odin requires .
Tried a different Odin Odin3 v1.3 always worked for me .
jje
Click to expand...
Click to collapse
yeah, windows sees it as usb mass storage, i can browse my sdcard and external card after plug to it, but again, Odin doesn't detect it
geram aku!
pcboyy said:
Click to expand...
Click to collapse
i think im the only one that noticed this
are you running windows 7 through OSX ?
EDIT : yes you are i can see the macbook air lable
are u really trying to update a phone through a virtual box ????
these are very delicate things for example flashing my router through mozilla can brick it
do u have any access to a pc running windows ?
Hi,
I have a stock rom, and here is an error message I get when trying to updating
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when this message appears, the phone is on downloading mode, and it stays like that until I take out the battery. The update obviously faills.
Any ideas? thanks
guyman20 said:
Hi,
I have a stock rom, and here is an error message I get when trying to updating
when this message appears, the phone is on downloading mode, and it stays like that until I take out the battery. The update obviously faills.
Any ideas? thanks
Click to expand...
Click to collapse
To update via kies you don't need download mode.
Just connect the usb cable with the phone on.
Sent from my Galaxy S2
mredfern79 said:
To update via kies you don't need download mode.
Just connect the usb cable with the phone on.
Sent from my Galaxy S2
Click to expand...
Click to collapse
I know, it put the phone in download mode by itself, while trying to install the update!
Guys, please help..
uninstall your Kies and reinstall it please.
My advice would be to ditch it for the piece of crap that it is and use Odin to flash the firmware.
Joey2o11 said:
My advice would be to ditch it for the piece of crap that it is and use Odin to flash the firmware.
Click to expand...
Click to collapse
I use odin and have used KIES in the past. What I find is that when you flash with odin you have to clear data on a lot of apps to make them work. I have never encountered this issue when updating the "regular" way. Odin does get the updates faster, but it seems to work cleaner.
guyman20 said:
message appears, the phone is on downloading mode, and it stays like that until I take out the battery. The update obviously faills.
Click to expand...
Click to collapse
Try to re-install the USB Drivers, you can check here how:-
http://forum.xda-developers.com/showpost.php?p=16070414&postcount=6
I reinstalled kies, reinstall the USB drivers, and i still get the same error..
any other ideas?
Thank you
guyman20 said:
I reinstalled kies, reinstall the USB drivers, and i still get the same error..
any other ideas?
Thank you
Click to expand...
Click to collapse
Try the update again and when it fails and you have to restart the phone yourself, don't close down kies, instead reconnect the phone to your pc. It should if i remember correctly go into a recovery mode and complete the install.
Joey2o11 said:
Try the update again and when it fails and you have to restart the phone yourself, don't close down kies, instead reconnect the phone to your pc. It should if i remember correctly go into a recovery mode and complete the install.
Click to expand...
Click to collapse
It didnt help, when i restarted the phone and plugged it back, kies didn't do anything and it was waiting for me to close the error message. I clicked ok and the upgrade was closed I got back to the same position as when I just plug the phone..
I got the exact same problem and I have tried everything in this thread.
My theori is that the computer (win7) doesn't recognice the phone correctly after the restart into Download Mode.
When I first connect the phone with the USB cable win7 recognices that phone as Samsung USB Modem, but when Kies restarts the phone into Download Mode the computer states that it is Samsung USB Modem #2 or sometimes even #3 or #4.
And I don't have a clue how to solve this.
Ok, using a different computer has solved the problem
thank you guys
I have solved it for this time.
I uninstalled program and drivers. Rebooted and changed USB connection. Installed Kies and drivers again. Then it worked.
Just took me about 20 times of testing and 2-3 reinstalls.
Hey,
too many users are still asking about theirs problems with 'Mass storage' so there is a small guide:
1. Download latest drivers 3.7.2. Someone can't find so there is a link
- LGUnitedMobileDriver_S4981MAN37AP22_ML_WHQL_Ver_3.7.2
2. You have to enable USB Mass Storage so where can I find this option:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. After that windows trying to install MTP drivers what is not working too much on WIN and therefore prevents installation of the USB MS driver so you have to delete some configuration file in:
C:/Windows/INF/
- wpdmtp.inf
- wpdmtp.inf
!BUT MAKE BACKUP FIRST!
After deleting those files windows automatically installs right drivers and you can use Mass Storage.
I did this a few times and when I reinstalled the drivers again, it worked!
Remember to turn on usb mass storage from your drop down screen after the usb cable is connected.
thanks mastershefis.
you mention some files but only list wpdmtp.inf, twice. typo? what is the other file?
gugler said:
thanks mastershefis.
you mention some files but only list wpdmtp.inf, twice. typo? what is the other file?
Click to expand...
Click to collapse
The second file is wpdmtp.PNF. It is in the original post by mastershefis linked below.
Source
..
Nevermind
isnt working for me, pc detects it but when i click computer> to find it no new "drive" is detected to brows the sd cards files.
Doesn't work for me.
The box for USB mass storage is greyed and I can't select it. I have a p5110.
Thanks
Thanks for posting your success story. It does help others, who are looking for confirmation. Thanks again. I am also facing the same problem and going to try this solution.
Thanks,
Joe
brownsmell said:
I did this a few times and when I reinstalled the drivers again, it worked!
Remember to turn on usb mass storage from your drop down screen after the usb cable is connected.
Click to expand...
Click to collapse
---------- Post added at 03:17 PM ---------- Previous post was at 02:30 PM ----------
Success !!!!!!!!!!!!!!
Thankssssssss a lot ... struggling to find a solution for this issue for such a long time ... Tried different things (different computers, different ports, PC Suite, Mounting USB Storage in Recovery, and Formatting SD Card). Nothing worked ...
Finally your solution worked. Reinstalled the latest drivers from the link you provided and restarted my PC ... USB connection prompt promptly appeared on the notification area ... gr8 help. Thanks for the link too.
But this works only when I connect my phone before starting the PC. If I restart the PC it works. If I unplug USB cable of the phone from PC and connect it back, it does not automatically recognizes. I have to restart the PC to get the USB related popup on my phone. Am I doing anything wrong ??? Your help would be appreciated.
Few Questions:
1. After trying all these; if I put the 2 files back on "C:\Windows\inf\wpdmtp.inf", will it cause a problem???
2. Will my USB connection work normally if I do so???
3. Without these 2 files, my Windows in my PC won't misbehave right ???
Please do reply. If I find the solution myself ... will try to post.
Thanks again.
Joe
mastershefis said:
Hey,
too many users are still asking about theirs problems with 'Mass storage' so there is a small guide:
1. Download latest drivers 3.7.2. Someone can't find so there is a link
- LGUnitedMobileDriver_S4981MAN37AP22_ML_WHQL_Ver_3.7.2
2. You have to enable USB Mass Storage so where can I find this option:
3. After that windows trying to install MTP drivers what is not working too much on WIN and therefore prevents installation of the USB MS driver so you have to delete some configuration file in:
C:/Windows/INF/
- wpdmtp.inf
- wpdmtp.inf
!BUT MAKE BACKUP FIRST!
After deleting those files windows automatically installs right drivers and you can use Mass Storage.
Click to expand...
Click to collapse
spljoe said:
Few Questions:
1. After trying all these; if I put the 2 files back on "C:\Windows\inf\wpdmtp.inf", will it cause a problem???
2. Will my USB connection work normally if I do so???
3. Without these 2 files, my Windows in my PC won't misbehave right ???
Click to expand...
Click to collapse
Your PC will works normally without these files. but maybe I have solutions for you. Try to find in windows folder wpdmtp.inf and wpdmtphw.inf if you find it in other folder put them to the C:\Windows\inf and replace older ones.
I have Optimus 4X HD right now and I found in C:\Windows\inf inf file from LG which didn't worked so I replaced it those files what I found in other folder and it worked
Hi everyone
i have a very rare problem with my x10 which is stocked at Sony Ericsson logo.
the problem is caused by flashing FeraLab Rom without flashing the FeraKernel before that. I didnt knew kernel is a most and should be installed first and that started to fuc my phone..
after that i tried everything in the net, installed everything that was related to xperia x10 drivers to get it detected by the PC but it just doesnt work and im still having the damn problem.
i tried using sony companion, sony update service ( which i guess doesnt support sony ericsson phones anymore ) to repair and anything els. but they're not helping me either.
I just need some help here to get my xperia x10 get detected by the windows 7 and flashtools/sony companion to repair it and reflash the roms.
right now when i connect it to pc it just says Unknown Device detected and by trying to updating driver with sdk tool and everything els, it still has problems. another message i get during this process is USB Device Not Recognized.
if any expert here have solutions for me, please give it to me, im stuck on this for about 1 week and you may know what that make me feel..
ok, first you must install SEMC flash drivers for X10, this are drivers that I used on my Win7 and Win8.1
https://dl.dropboxusercontent.com/u/50822928/X10_drivers.rar
przemo2011 said:
ok, first you must install SEMC flash drivers for X10, this are drivers that I used on my Win7 and Win8.1
https://dl.dropboxusercontent.com/u/50822928/X10_drivers.rar
Click to expand...
Click to collapse
can you tell me what should i exactly do with those files? i dont know how they work.
thanks for helpin!
you need to connect your device in flash mode in order to install this drivers. To do this, first turn off your X10 and unplug it from your PC. Then press and hold back button and connect the phone to PC USB port. You should see black screen and green LED on, and the PC should find a new device called "SEMC HSUSB Device". Now install on this new founded device drivers from above.
przemo2011 said:
you need to connect your device in flash mode in order to install this drivers. To do this, first turn off your X10 and unplug it from your PC. Then press and hold back button and connect the phone to PC USB port. You should see black screen and green LED on, and the PC should find a new device called "SEMC HSUSB Device". Now install on this new founded device drivers from above.
Click to expand...
Click to collapse
I dont why, but for the first time ever i saw SEMC Flash Device installed on my windows 7 64 bit, but after that its not working again and when i connect my phone to pc in Flash Mode, windows just cant detect it and calls it Unknown Device..
i also did what u told me, but it just giving me a error like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is there anything im missing ?
Please someone help me fix this problem... Im having this problem for a long time.
1 More note to say is i two diffrent usb cables but not the orginal one, but still having problem with this...
DanteMayCryM said:
Please someone help me fix this problem... Im having this problem for a long time.
1 More note to say is i two diffrent usb cables but not the orginal one, but still having problem with this...
Click to expand...
Click to collapse
man try to use this driver
sanababitz said:
man try to use this driver
Click to expand...
Click to collapse
Bro It's not working, at least for me. Is this problem related to my windows? What do you think?
I show some pictures to you maybe you know more about this thing. Thanks for sharing you information and helping me!
Nobody could help me in this? (
DanteMayCryM said:
Nobody could help me in this? (
Click to expand...
Click to collapse
try to disable digital signature requirement using this method:
Method 1.
Go to Start Menu and type "cmd.exe" in the Search Bar and press <Enter>. (Remember you must be logged on as Administrator)
OR you can go to "All Programs", then "Accessories", right-click on "Command Prompt" and choose "Run as administrator".
1. Now type the following and press <Enter> after each line:
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
2. Restart your computer
3. This will disable your Windows 7 driver signing.
4. Install the driver for your device (X10i)
If this did NOT work for you, here is another way to disable Windows 7 driver signing.
Method 2.
1. During boot-up, continuously press <F8> to get to Advanced Boot Options. Note: On some systems, you need to first press <F2> to go into Boot Menu, then press <F8> to reach Advanced Boot Options.
2. When the menu appears, use the DOWN arrow key to scroll to “Disable Driver Signature Enforcement.”
3. Press <Enter>.
4. Continue the boot process.
5. After your computer has completed the boot process, try to install the driver for your device.
Hope this helps..
its not working bro.. still have the same problem yet !
have a similar problem but i can conect but problem is i cant press hold button coz my phone automaticly turn on....,y story well i have a problem i accidently when i was rooting my phone xperia x10 i do something wrong and my phinw wont turn on or turn off and when i try battery method it always turn on alone, i cant fix my phone but i bought it yday, i try to fix it with companion but problem is companion is asking to me to turn off the phone and press backward button etc etc but i cant do that phone automaticlly turn on when i put battery, what to do please help me ://
Tom