Hello,
My SGS II I9100G won't turn ON. I didn't do anything, just leave it on (idle), after back to work, my phone is completely dead. At 1st, I thought the battery is dead, but I charged nothing show-up on screen, plugged into pc, nothing show-up on screen either. I borrow my friend battery, nothing also. It completely won't turn ON.
I didn't flashed into custom rom/kernel, just root it few month ago.
This thing suddenly happen. Help me guys!
But one thing I noticed, whenever I put the battery, few minutes later, I can barely feel hot at the back of the cover..
Additional info:
1) ODIN, KIES not detect my phone!
2) I tried log into download mode, nothing happen!
3) Pull the battery and put back on, nothing happen!
4) Plug the usb & combo download mode, put back the battery = nothing happen also
Return to service center. Borked. And hope they don't discover/check that you rooted it & make you pay for the repair/replacement.
really? someone pls help me
zarboga said:
really? someone pls help me
Click to expand...
Click to collapse
The only other possible thing you can try is a different battery... but sounds like you already tried that... so you'll have to take MistahBungle's advice; if the phone doesn't power on, there's really nothing anyone here can do to help you. What kind of miracle are you expecting???
Miracles post 500 dollars
otherwise clean battery connections .
Unless you can get to download mode their is nothing else that you can do except JTag machine/service centre .
Am i reading number four as you have tried usb recovery jig ??
jje
Related
I tried to upgrade to froyo using the odin method from this thread http://forum.xda-developers.com/showthread.php?t=853950. After everything was successfully done my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
First, Get the Shipping rom (pit and tar files) so you can ODIN back to stock
Be sure you have the newest version of ODIN
Then remove the battery, plug the USB to the PC.
Now put the battery back.
Press both vol keys (up and down) and hold.
That should get you in Download Mode.
If it does not work, take battery out, unmplug USB.
Put battery back and try again to go into download mode.
Now you put the wrong version of froyo, if your keys maps are changed you may be screwed
If so, good luck! You are gonna need a lot of research to see if you can save it
i think i'm screwed.....nothing is working
If anyone else could help me with this, it would be great. I'm in between a rock and a wall right now with my phone.
you flashed the wrong rom. You didn't know that, did you?
iynfynity said:
you flashed the wrong rom. You didn't know that, did you?
Click to expand...
Click to collapse
No I didn't know that sadly. Is there anyway I can save my phone?
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
jmcghee1973 said:
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
Click to expand...
Click to collapse
Well right now I'm simply trying to get the phone to turn on which it won't, I was not asking for help to odin or recover. I was trying to ask if anyone else had this problem and if my phone is totally killed or if there's a possibility that i can save it. But thanks for your 2 cents.
Me too
I had ordered Samsung Vibrant Unlocked from T-Mobile USA around a month back. I am well past the 30 day replacement now.
I Rooted it updated to Axura 2.2.5.9
After all the procedure got completed, I rebooted the phone and now it just won't start at all.
My piece is Hardware Locked wherein I can't get into the Recovery Mode, but can get into the Download Mode. But I am not even able to get into the Download mode now.
It just won't freaking turn on.
If I send it over for repair, as the phone is a rooted one, will I void the warranty ?
Please reply quickly. I am starting to freak out.
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
lol you must be very happy after that, good to great that.
Sent from my SGH-T959 using XDA App
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Different Situation
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
IClassStriker said:
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
Click to expand...
Click to collapse
If your phone powers on at all, you should be able to get into DL mode. Follow the instructions on how to revert to stock via ODIN.
In reply to the OP, if you tried the download mode method:
connect phone to usb
pull out battery
hold both volume sticks
put in batttery
and the phone still does not turn on even after multiple tries , well you're a bit screwed. But, Samsung cannot detect if the phone has been rooted if it cannot even turn on. Just tell them the Kies Mini update bricked the phone.
omg leave ur phone on charger for 10 min, pull battery out when hooked up to charger put battery back in , let sit for few min pull battery out hook up phone to computer hold vol up vol down pop battery in , helped ? np this has been answered gazilion times in other threads
btw it takes few try this way to get it back up running so dont stop on first , hey .
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
Sent from Bionix V powered Vibrant
my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
yes u do that it makes sense lol
gmoney007 said:
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Click to expand...
Click to collapse
You're talking about a DIY Jig. A JTAG is completely different. They cost $150-300. You can pay to have a local repair shop jtag it for around $50 or send it to Samsung to repair/replace. I'm still trying to find out how much Samsung would charge for the repair if it's deemed out of warranty.
If your phone refuses to turn on no matter what you do and it gets warm or hot if you leave the battery in it, read on:
I hope my suggestion is not too late. I was in the situation before. I tried everything everyone said here and somewhere else. None of them works.
The reason that those methods don't work because you cannot get to download or recovery mode or even the pc-phone screen since your phone won't turn on. The reason that your phone doesn't turn on because the bootloader has been messed up. A jig will work only if your phone can be turned on somehow.
Three possible solutions:
1. Repair or replace it with T-mobile, or
2. Get someone to repair it with a riff box or other similar tool, or
3. Get the box and fix it yourself (not recommended if you are not familiar with electronic stuff.)
This is the link for the same problem you have; this guy bought the box and has his phone fixed himself. If you live in US, he may do it for you if you have no place to go. It does hurt to ask.
http://forum.xda-developers.com/showthread.php?t=974862&page=6
Hello,
Don't know if this has been asked but I have been looking for it for a while. Cant seem to fine a solution.
I flashed my phone wrong with hemdall now my phone wont turn on. Screen completely black i reboot pulled out the battery everything I can think of can you give me a suggestion. I was thinking about buying a USB Jig.
I'm in the same boat and I bought the Jig. However I think Josh just acts as a middle man on this one and shipping is actually from overseas. But you can find it here. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/ I suggest a little extra shipping cost.
However the other suggestion if that is not working (I think I killed my phone) is to have Josh do a Jtag on the phone. You can find that at http://mobiletechvideos.mybigcommerce.com/samsung-vibrant-jtag-brick-repair/
Can you get into download mode? Remove battery, plug usb, press up+down vol buttons and insert battery.
hey i having same problem but i could see the vibrant samsung screen but my phone won't pass that and like you say about the usb cable and then plugging the battery i can do that as well but how can i get my phone back and running another rom!!!
Monster809 said:
hey i having same problem but i could see the vibrant samsung screen but my phone won't pass that and like you say about the usb cable and then plugging the battery i can do that as well but how can i get my phone back and running another rom!!!
Click to expand...
Click to collapse
If you can see the Vibrant Samsung screen just use Odin to flash back to stock
Kabiigon said:
Hello,
Don't know if this has been asked but I have been looking for it for a while. Cant seem to fine a solution.
I flashed my phone wrong with heimdall now my phone wont turn on. Screen completely black i reboot pulled out the battery everything I can think of can you give me a suggestion. I was thinking about buying a USB Jig.
Click to expand...
Click to collapse
The real solution here i doing a JTAG to your phone or make the Unbrickable MOD (It's very dangerous, a person with Welding and electronic skills must do this).
Another thing you can do is buy a broken Screen phone from Ebay (it more cheaply) and change the motherboard!!
My suggestion would be to continue to try to get into Download mode on the phone. My phone was DEAD no life at all plugged into the wall or PC. I kept trying to get it into download mode and magically after hours of failures, ODIN recognized the device! The phone was still DEAD no life at all on the screen but ODIN had recognized that my device WAS indeed connected. So I continued to flash back to stock and as always with a little patience ODIN was there to save me. The phone automatically rebooted after ODIN was done and BOOM! Good2Go
Goodluck!
^^I'm gonna try that and hopefully with some patience it will work. Otherwise I'm also gonna be ordering a jig, they're not that expensive. My problem is the same as the OP's. My vibrant will just not give any signs of life. I was trying to odin to stock from one cosmics ics RC3.1. Wanted to start on a fresh install for AOKP build 25. But then odin decided to fail on modem.bin. then it just hung and phone turned off, haven't been able to turn it on since. I've spent the last two hours trying to put in different combinations and keys and usb attachments to bring any hints of life, but so far nothing. Bootloader update was not checked on odin so I'm pretty confident that its not due to bootloader mismatch but someone correct me if I'm wrong. Sending it back to samsung or tmobile is very far of an option since I've modified the phone to add FFC. If anyone has any advice or hints it would be greatly appreciated. I'm kind of hating myself and flashing now since I was very happy with the rom that I had and how everything was setup. I just wanted to try something new for fun and this went and blew everything up.
^^I literally held down the buttons > plugged in the cord > put in the battery > and counted in my head the amount of seconds it took the phone to "normally" boot to where I would "normally" let go of the power button to get into Download mode, lol I know it sounds ridiculous but that's how I did it. It helped that I had my sisters working Vibrant right there, I used her phone to get into download mode and timed the process and used that as a baseline for the timing of trying to get the "DEAD" Vibrant into download mode.
If all else fails a JTAG as mentioned should fix your problem fosho!
Goodluck!
Ye I fixed it. One day I did what I had been doing the whole time and it just decided to work. Got into download mode then went back to stock. Our phone is so freaking weird yet I love the damn thing. It really is unbrickable. To anyone in this situation just never give up.
Sent from my SGH-T959 using XDA App
Hi there,
i thought my sgs2 was bricked cause i couldnt start it anymore, even not got into the download mode! so i used an USB JIG to get into the download mode and followed the instruction from
Phistachio
.... i flashed the recovery and the kernel formthe gingerbread version!
and voila it booted normally. now i got the real problem, the phone wasnt bricked, the power button doesnt works anymore!!!
i only can go into the download mode with the USB JIG and cant start my phone without flashing it new
well i even cleaned the section of platine where the bower button is with 100% alcohol, no chance.
PLS HELP, what can i do? confused:
ng
phoenix20815 said:
Hi there,
i thought my sgs2 was bricked cause i couldnt start it anymore, even not got into the download mode! so i used an USB JIG to get into the download mode and followed the instruction from
Phistachio
.... i flashed the recovery and the kernel formthe gingerbread version!
and voila it booted normally. now i got the real problem, the phone wasnt bricked, the power button doesnt works anymore!!!
i only can go into the download mode with the USB JIG and cant start my phone without flashing it new
well i even cleaned the section of platine where the bower button is with 100% alcohol, no chance.
PLS HELP, what can i do? confused:
ng
Click to expand...
Click to collapse
Hope your phone is still on warranty.
Then give it to a service center/shop for repair.
If not ... ask for a "cheap" repair.
Sorry, but if it is a hardware issue, it may need to replace hardware parts.
Yup, bro that's a hardware issue, and you can do NOTHING about it unless you want to disassemble your phone. If you can disassemble your phone, it is simple- head for the area with the power button and im sure it'll just be slightly displaced from the button position. What you gotta do is just push it back into its place and VOILA. Happened to me once, have been through it and also successfully repaired my phone. If you can't do this, go ahead and flash a stock firmware on your phone and give it to samsung, IF IT IS STILL IN WARRANTY. Else, go for a cheap repair...
Click "THANKS" if you found this useful !!
Cheers.
Messing around with sim and battery can work
A month ago I accidentally spilled some tea over my phone, and after taking out its battery, sim and microsd and putting it in a bowl full of dried rice and later letting it dry under a warm room fan for some hours, the only damage was that the power button stop responding at all. I guess the wires inside got corrosed or something and the button is now totally non-functional. So, how do I power up my phone if the battery has drained out / I want to change to a spare one / any other situation?
The answer: I really don't know what way is the exact way to power up the phone, but every time I just messed around with the components for a while and eventually the phone was turned on.
I'm talking about the sim card, the battery and the charger. Below are some of the ways by which I managed to get my phone booted up:
Remove the battery, reinsert and wait;
Remove the SIM card and reinsert the battery and then the SIM, and wait;
Reinsert the battery and then remove the SIM card, and wait;
Connect to a charger, reinsert the battery, reinsert the SIM card and unplug the charger;
Randomly press the Home button in any time you feel is right, during the steps above.
I can't remember what else I did because every time I just hyperactively messed around with it until it powered on, but it's been a month like so and I still didn't get it fixed, so generally these are the ways I use to power up my phone. I hope it will be helpful Good luck!
NadCu42 said:
the only damage was that the power button stop responding at all
Click to expand...
Click to collapse
You might wanna repair that button mate. Any issues you may have with ur software would ultimately require the use of the Power button!
"To err is human, to forgive is divine"
Sent from my SGS II
Come on, just take the phone to repair.
Sent from my digital submersible hovercraft.
Hi all, i got my Galaxy S2 about a year ago (9100 normal, non AT&T or verizon or another else ) and i never encountered problem like this. One day i was texting on the toilet, and unfortunately it fell down on a bowl of water and its all soaked. I just turn it of and take out the battery, when i turn on it again, the start mode triggers, the icon Samsung igt 9100 is showing up and it keeps blinking and blinking, bootlooping. many of my friend said that it is fine and just wait for the water inside the machine to dry up, like one week or so. but after one day i tried to turn it on, the yellow triangle below the 9100 logo is gone ( i think its resetted and everything is gone ) and it went to download mode. But after that, i was not careful enough and my battery fell off, and the phone is turned off dead. and after all of that, i can't even turn on the phone, nothing happened, its like a dead phone without battery.
i went to many forums and many people tried to fix it using the download mode USB jig recovery kit, i bought the i9100 USB jig on the eBay, its arrived today. I tried to plug in on my phone, and i try to turn it on and even every boot method ( download mode, and recovery mode ) and holding the power, still nothing happens. what should i do...?? does that means my cellphone is dead forever? :crying::crying:
You should have put it in a bowl of dry rice for a couple of days to completely dry it out. I think you turned on your phone too soon with the risk of having it f**cked for good.
You seem more accident prone than Mr Bean.
Stick it on eBay
theunderling said:
You seem more accident prone than Mr Bean.
Stick it on eBay
Click to expand...
Click to collapse
when i plugged it into my pc, it works, it says that device is not recognized but it still shows, i think it might be some hope, can somebody help me
Unfortunately it is dead, because you did not wait til it dryed out before starting. You fried the flash chip which contains the information for the phone to run.
Only way to fix it is to replace the motherboard. Which means it becomes a new phone with different IMEI.
aiserukana said:
Hi all, i got my Galaxy S2 about a year ago (9100 normal, non AT&T or verizon or another else ) and i never encountered problem like this. One day i was texting on the toilet, and unfortunately it fell down on a bowl of water and its all soaked. I just turn it of and take out the battery, when i turn on it again, the start mode triggers, the icon Samsung igt 9100 is showing up and it keeps blinking and blinking, bootlooping. many of my friend said that it is fine and just wait for the water inside the machine to dry up, like one week or so. but after one day i tried to turn it on, the yellow triangle below the 9100 logo is gone ( i think its resetted and everything is gone ) and it went to download mode. But after that, i was not careful enough and my battery fell off, and the phone is turned off dead. and after all of that, i can't even turn on the phone, nothing happened, its like a dead phone without battery.
i went to many forums and many people tried to fix it using the download mode USB jig recovery kit, i bought the i9100 USB jig on the eBay, its arrived today. I tried to plug in on my phone, and i try to turn it on and even every boot method ( download mode, and recovery mode ) and holding the power, still nothing happens. what should i do...?? does that means my cellphone is dead forever? :crying::crying:
Click to expand...
Click to collapse
plug in the charger and let it charge for few hours. You should have left the phone to dry before switching on
Cosmic Blue said:
Unfortunately it is dead, because you did not wait til it dryed out before starting. You fried the flash chip which contains the information for the phone to run.
Only way to fix it is to replace the motherboard. Which means it becomes a new phone with different IMEI.
Click to expand...
Click to collapse
will it cost much?
I doubt there's anyone here who can tell you how much. That will depend on how much parts & labour are in your country. Send it in & find out.
Hi!
My Galaxy S2 suddenly died today and I have not been able to turn it on.
This has happened before, but it worked after switching battery, this time it didn't.
I have tried many things that people have suggested on Google, but I am not even able to get into recovery/download mode.
The phone was running NeatROM 4.4.4.
What did you do ?
Nightshadow931 said:
What did you do ?
Click to expand...
Click to collapse
What I tried?
Removing battery, USB jig, USB power only, download mode, vol up + home + power, etc.
No, i ask what did you do to make it die?
Nightshadow931 said:
No, i ask what did you do to make it die?
Click to expand...
Click to collapse
I checked my phone and saw that I received a message, put it in my pocket, took it up - wouldn't respond.
Could still use some help, thanks.
Try putting a new battery in that you are sure has some charge already in it .
Try booting into recovery/download mode .
If it doesn't still turn on it may be that your screen has died or mainboard is dead . Both of which require taking it for repairs as it is kinda like swap the part hit and miss kinda repairing. Still I guess if screen goes bad you should feel some vibration .
Plus it would be nice to know that your phone didn't go off of low battery . Since it can rule out very unlikely scenario that power button has failed or phone died of low battery and charger is refusing to charge the phone .