Following instructions here http://forum.xda-developers.com/showpost.php?p=20331623&postcount=6 to unlock/relock boot loader. Everything works fine until I flash the nopudding4u.sbf. After that I get the Failed to boot 4 message. Any help would be appreciated!
Photon4GUser said:
Following instructions here http://forum.xda-developers.com/showpost.php?p=20331623&postcount=6 to unlock/relock boot loader. Everything works fine until I flash the nopudding4u.sbf. After that I get the Failed to boot 4 message. Any help would be appreciated!
Click to expand...
Click to collapse
It says "Starting RSD Mode" after right? If you're trying to relock the bootloader, you should be able to flash any of the SBFs to get it locked again.
Correct - but this thread http://forum.xda-developers.com/showthread.php?t=1281528 suggests that you can relock, get back 4G and keep UbunTop & WebTop+. If I flash back an sbf such as 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf the phone is relocked but the original WebTop is installed.
Photon4GUser said:
Correct - but this thread http://forum.xda-developers.com/showthread.php?t=1281528 suggests that you can relock, get back 4G and keep UbunTop & WebTop+. If I flash back an sbf such as 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf the phone is relocked but the original WebTop is installed.
Click to expand...
Click to collapse
Webtop+/Ubuntop with 4G
Root-Unlock-Relock.zip
Flash 198_7 SBF then root, unlock and install CWM Recovery.
Flash WebTop+ 1.2
Factory reset phone Menu/Settings/Privacy/Factory Data Reset DO NOT SKIP THIS STEP
Reboot phone into fastboot mode: VOL down/Power. Use VOL down to scroll though options til you see "fastboot" then VOL up to enable. and connect phone to computer
Open command prompt in the moto-fastboot folder and type the following using the <enter> key after each command:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery stock_recovery.smg
moto-fastboot reboot
Disconnect phone from computer
Start RSD Lite on your computer
Reboot phone into RSD mode: VOL down/Power. Use VOL down to scroll though options til you see "RSD" then VOL up to enable.
Connect phone to computer.
Flash nopudding4u.sbf.
Close RSD Lite and disconnect phone.
Reboot phone
Thanks for the response. This is exactly what I was following - got this error after step 10 (tried 3 different times).
I'm digging through this to see where the issue is. I'll keep you updated.
Found the issue and fixed it.
Thanks! That worked! Appreciate the support!
This thread (and the link to the explanation) was very helpful. Lokifish Marz, you might want to make a note in the WT+ post (http://forum.xda-developers.com/showpost.php?p=17956277&postcount=2) for people to be sure to reflash the full 198_7 or 198_6 SBF and specifically not try to relock without full SBF flash (which is shown in the guide.htm in the Root-Unlock-Relock zip). Just to draw attention that the full SBF Flash is required, since I (probably like OP) tried the quickest/simplest route to relocking first.
Hi, I've been struggling figured out how to get this phone back to Stock from ICS. Rezound is my first HTC phone so it's kind of complicated to figure out how to go back to Stock from Custom ROM (ICS).
I've looked around and did not see any guide for this. I think it would be handy to share this to Noobs like me
1/ Reboot into Recovery
2/ Wipe everything (Data/Cache/Davik Cache/Format System)
3/ Flash this http://www.mediafire.com/?q9a7st7n9adreth (I dont know if it's necessary or not but I flashed it)
3/ Flash this ROM http://www.scottsroms.com/downloads.php?do=file&id=76&act=down&actionhash=guest
4/ Get in to Fastboot USB (Remove and put battery back in -> Volume Down+Power -> Highlight Fastboot and press the Power button -> Connect to USB Cable)
5/ Push this boot.img http://www.mediafire.com/?r7nhnfh8raq4bn7 to your phone by using fastboot ......\fastboot flash boot boot.img
6/ Reboot your phone and wait until everything is set
7/ Reboot the phone back into Fastboot USB
8/ Relock your Bootloader
9/ Reboot the phone back into Fastboot USB (dont Skip this step)
10/ Run this http://www.filefactory.com/file/c21cc13/n/RUU_Vigor_VERIZON_WWE_2.01.605.11_Radio_RS_0.95.00.1123r_3161E_9K_QMR_release_233635_signed.exe and DONE
Couldnt you just relock the bootloader and run the RUU?
EmerikL said:
Couldnt you just relock the bootloader and run the RUU?
Click to expand...
Click to collapse
Doesn't work if you're on leak ICS
your my hero!!! im forever in debt to you
I currently have the CleanRom ICSE 2.3, and would like to go back to the rooted stock rom, will this guide work for me...if so could you please further explain step 5 I know that I will have to push in command prompt but I am not sure how to get the command started, I am totally NOOB at this...thanks in advance for your help
nbhnohome said:
Doesn't work if you're on leak ICS
Click to expand...
Click to collapse
It does if you prevent a mainver update.
nbhnohome said:
Hi, I've been struggling figured out how to get this phone back to Stock from ICS. Rezound is my first HTC phone so it's kind of complicated to figure out how to go back to Stock from Custom ROM (ICS).
I've looked around and did not see any guide for this. I think it would be handy to share this to Noobs like me
1/ Reboot into Recovery
2/ Wipe everything (Data/Cache/Davik Cache/Format System)
3/ Flash this http://www.mediafire.com/?q9a7st7n9adreth (I dont know if it's necessary or not but I flashed it)
3/ Flash this ROM http://www.scottsroms.com/downloads.php?do=file&id=76&act=down&actionhash=guest
4/ Get in to Fastboot USB (Remove and put battery back in -> Volume Down+Power -> Highlight Fastboot and press the Power button -> Connect to USB Cable)
5/ Push this boot.img http://www.mediafire.com/?r7nhnfh8raq4bn7 to your phone by using fastboot ......\fastboot flash boot boot.img
6/ Reboot your phone and wait until everything is set
7/ Reboot the phone back into Fastboot USB
8/ Relock your Bootloader
9/ Reboot the phone back into Fastboot USB (dont Skip this step)
10/ Run this http://www.filefactory.com/file/c21cc13/n/RUU_Vigor_VERIZON_WWE_2.01.605.11_Radio_RS_0.95.00.1123r_3161E_9K_QMR_release_233635_signed.exe and DONE
Click to expand...
Click to collapse
This is GREAT, a little vague still as there are other's that you can't even label as n00bs I guess cause It still isn't broken down to the easiest process steps. Thanks every way!
con247 said:
It does if you prevent a mainver update.
Click to expand...
Click to collapse
plenty of us jumped the gun before reading that you could avoid that. Just realized today actually. Feel half retarded haha
Sent from my ADR6425LVW using Tapatalk
thank YOU
this worked like a charm. i stopped after installing the stock rooted rom. thank you so much. this was driving me insane with the mainver errors. Just curious, what does that boot image write? like what does it officially do in lay mans terms?
Edit does it re write the mainver on the phone?
nbhnohome said:
Hi, I've been struggling figured out how to get this phone back to Stock from ICS. Rezound is my first HTC phone so it's kind of complicated to figure out how to go back to Stock from Custom ROM (ICS).
I've looked around and did not see any guide for this. I think it would be handy to share this to Noobs like me
1/ Reboot into Recovery
2/ Wipe everything (Data/Cache/Davik Cache/Format System)
3/ Flash this http://www.mediafire.com/?q9a7st7n9adreth (I dont know if it's necessary or not but I flashed it)
3/ Flash this ROM http://www.scottsroms.com/downloads.php?do=file&id=76&act=down&actionhash=guest
4/ Get in to Fastboot USB (Remove and put battery back in -> Volume Down+Power -> Highlight Fastboot and press the Power button -> Connect to USB Cable)
5/ Push this boot.img http://www.mediafire.com/?r7nhnfh8raq4bn7 to your phone by using fastboot ......\fastboot flash boot boot.img
6/ Reboot your phone and wait until everything is set
7/ Reboot the phone back into Fastboot USB
8/ Relock your Bootloader
9/ Reboot the phone back into Fastboot USB (dont Skip this step)
10/ Run this http://www.filefactory.com/file/c21cc13/n/RUU_Vigor_VERIZON_WWE_2.01.605.11_Radio_RS_0.95.00.1123r_3161E_9K_QMR_release_233635_signed.exe and DONE
Click to expand...
Click to collapse
I am looking for the .exe RUU to revert back to 100% stock..all the ones posted that are hosted at filefactory.com are no longer working
Google RUU_Vigor. If you have the OTA you are looking for 2.01.xxx.xx, if you don't have the OTA, look for 1.02.xxx.xx.
phillybizzle said:
I am looking for the .exe RUU to revert back to 100% stock..all the ones posted that are hosted at filefactory.com are no longer working
Click to expand...
Click to collapse
http://www.scottsroms.com/downloads.php?do=cat&id=11
You know I would have hit the thanks button about 6 times if I could have. This stuff is crazy sometimes.. I mean compared to my previous HTC phones.
I unlocked and rooted and went to ICS. Didn't like somethings so I thought I would go back to GB and wait for the OTA update. I followed the directions up to the Relock. I couldn't get the file to download from filefactory and others said they skipped it, so I did to.
So I got back to the Gingerbread ROM but now I can't see my SD card. Other people have said there is patch to fix the mainver or just flash back to the ICS leak, but I can't see my SD card so I have no way to reload anything.
I put the SD card into my computer and it shows up as completely blank, but readable. My Hboot is 2.25 which others have said that means I have to stay on an ICS leak, but once again, I can't get back there when I can't see a SD card to select an image.
I tried another SD card and its not readable either.
I saw another post at androidforums where he wiped data/cache/system, etc so I tried formatting system(I hadn't tried that prior) and now I am stuck at the White HTC Screen.
Any ideas?
---------- Post added at 01:55 AM ---------- Previous post was at 01:17 AM ----------
Well I thought I would post how I fixed it.
I had previously downloaded the Rezound All in One Kit which had fastboot and a few other files in there.
So I did this
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip PH98IMG.zip <---which is the 3.14 leak of ICS
fastboot reboot
Credit goes to scotty85 at Androidforums.
So I had to flash back to ICS and now I can see my SD card...which has been completely wiped of course
nbhnohome said:
Hi, I've been struggling figured out how to get this phone back to Stock from ICS. Rezound is my first HTC phone so it's kind of complicated to figure out how to go back to Stock from Custom ROM (ICS).
I've looked around and did not see any guide for this. I think it would be handy to share this to Noobs like me
1/ Reboot into Recovery
2/ Wipe everything (Data/Cache/Davik Cache/Format System)
3/ Flash this (I dont know if it's necessary or not but I flashed it)
3/ Flash this ROM
4/ Get in to Fastboot USB (Remove and put battery back in -> Volume Down+Power -> Highlight Fastboot and press the Power button -> Connect to USB Cable)
5/ Push this boot.img to your phone by using fastboot ......\fastboot flash boot boot.img
6/ Reboot your phone and wait until everything is set
7/ Reboot the phone back into Fastboot USB
8/ Relock your Bootloader
9/ Reboot the phone back into Fastboot USB (dont Skip this step)
10/ Run this and DONE
Click to expand...
Click to collapse
Your uploads are no longer working.
Hi all
I am in urgent need of help to fix my Atrix 4G.
The Story:
I have an Atrix 4G. It was on 2.2.4 then official update came and I updated it to 2.2.6.
Then I was wondering about installing custom rom. This was my first time to install a custom rom. So I googled and found.
Code:
http://forum.xda-developers.com/showthread.php?t=1398819
Neutrino ROM V2.9 [14/08].
So I rooted and unlocked my fone. My fone was successfully rooted and unlocked and I restarted it and there was Unlocked written on Booting Screen.
In this procedure I had to reset the phone so it was back to 2.2.4.
After that I downloaded the above rom put in in SD Card and Downloaded Recovery APK from market and it asked to restart the phone with power adapter plugged to start so I did the same. And recovery started. Then following the instructions I installed the custom rom and it was installed successfully it was my first time so I didnt took any backups unfortunately. So after installation the phone did'nt actually start. It was stuck on Booting Screen with Moto Logo.
So I again googled and started to find the solution some said restart some said remove battery some said wait I tried all but no result.
Then I tried to install the stock rom.Following this
Code:
http://androidforums.com/atrix-4g-all-things-root/510778-flashing-back-stock.html
When i start to run RSD lite it says Creating Image and then throws an error like Unable to send RAM files.
Now I want to fix my Atrix 4g and there is no backup and no recovery mod.
My fone can go into options like Fastboot and RSD Protocol Mode. I mean I can access options on pressing Power and Volume Up/Down buttons.
Can any one please tell me solution? I will be very very thankful.
In fastboot flash recovery
fastboot devices
fastboot erase recovery
fastboot falsh recovery recovery.img
fastboot reboot
Go to recovery mode, try to wipe data, cache and dalvik. If you have Neutrino rom on your internal SDcard you can flash it with recovery.
ovitz said:
In fastboot flash recovery
fastboot devices
fastboot erase recovery
fastboot falsh recovery recovery.img
fastboot reboot
Go to recovery mode, try to wipe data, cache and dalvik. If you have Neutrino rom on your internal SDcard you can flash it with recovery.
Click to expand...
Click to collapse
I have erased data many time from the Android Recovery
And I think there will be no recovery.img. Where can I get it??
There is option of data and cache partition wipe but there is no option like Dalvik.
Can you please guide me it was my first time with custom roms and I didnt took any backups.
in fastboot package is recovery...
ovitz said:
in fastboot package is recovery...
Click to expand...
Click to collapse
Thanks, Fortunately my senior has installed Custom rom in it. And it is working fine with custom rom.
I'm chilean and I try to write in English
The problem is that I update the Atrix with GingerBread 2.3.6 AT&T to the Leak 4.0 ICS with RECOVERY and then wanted install the gingerbread again with RSD Lite 5.6, but now the device show me the logo with this text "failed to boot 1" and then try again with RSD but the program was saying "error switching phone to bp pass through mode 0x70be" :crying:
so...
The phone is dead or is there any solution?
Thanks
turn your Atrix in Fastboot mode, flash bootloader unlock, flash recovery, 3x wipe, flash rom and addons.
For next time try to use fruitcake, not official SBF
ovitz said:
turn your Atrix in Fastboot mode, flash bootloader unlock, flash recovery, 3x wipe, flash rom and addons.
For next time try to use fruitcake, not official SBF
Click to expand...
Click to collapse
could you make me a mini tutorial of that you said please?
Im noob in this and I want to do this well, thanks
1. Power + up
2. plug your atrix to pc and run RSD on PC
3. flash sbf unlocker
4. turn your Atrix off and turn it with Vol down, than press Vol Up
5. connect Atrix to PC and run Fastboot on PC
6. type:
fastboot devices
fastboot oem unlock
fastboot erase recovery
fastboot flash recovery recovery_name.img
7. reboot Atrix into recovery
8. wipe data, cache and dalvik
9. flash rom, gapps and addons (if needed)
10. enjoy
Are there other ways to flash a recovery with a locked bootloader?
My Problems:
I can't flash my stock recovery through fastboot with a locked bootloader.
I can't boot into my recovery because my current recovery is TWRP 2.5.0.1 and I have a locked bootloader.
I can't unlock my bootloader because I have used an IMEI Hack Tool and set my IMEI to 0 (I guess).
I can't boot into my ROM because I used an IMEI Hack Tool.
I can't Force Upgrade too (Vol Up + Down + Power). It only shows a pink/purple screen.
Solutions:
I can only flash a recovery with an unlocked bootloader.
I can only boot into a recovery with an unlocked bootloader (except for stock).
I can only unlock bootloader if my IMEI has restored.
I can only restore my IMEI if I can boot into my ROM.
I can only boot into my ROM if I have a stock recovery.
I can only Force Upgrade if I have restored my IMEI.
If I could only restore my IMEI through fastboot, that would be great!
So, please help!
You cant restore stock recovery ?
You cant enter to trwp ?
You cant restore IMEI cuz rom bootloop ?
You cant force flash stock firmware cuz fastboot is pink ?
I also "zero" my imei many times to flash stock firmware, but i allways can enter trwp and restore buckup or flash rom in zip
OmenHTX said:
You cant restore stock recovery ?
You cant enter to trwp ?
You cant restore IMEI cuz rom bootloop ?
You cant force flash stock firmware cuz fastboot is pink ?
I also "zero" my imei many times to flash stock firmware, but i allways can enter trwp and restore buckup or flash rom in zip
Click to expand...
Click to collapse
I can force upgrade now since i formatted my sd card. But the force upgrade fails at step 2/2.
.vonpatrick. said:
I can force upgrade now since i formatted my sd card. But the force upgrade fails at step 2/2.
Click to expand...
Click to collapse
If upgrade fail as step 2/2 your IMEI its not "zero" cuz IMEI block upgrading firmware from branded to nonbranded
OmenHTX said:
If upgrade fail as step 2/2 your IMEI its not "zero" cuz IMEI block upgrading firmware from branded to nonbranded
Click to expand...
Click to collapse
If my imei is not zero, then why can't i boot my phone?
And why can't i unlock my bootloader with my unlock code?
.vonpatrick. said:
If my imei is not zero, then why can't i boot my phone?
And why can't i unlock my bootloader with my unlock code?
Click to expand...
Click to collapse
OK, lest start from beggining
1.You must unlock bootloader by code ( first run check Lock / Unlock status ) (fastboot mod)
2. Flash TRWP (fastboot mod)
3. Flash SuperSU or Superuser zip (trwp)
4. Backup IMEI on running rom
5. Hack IMEI on running rom
6. Update phone by forceupdate flash update.app (rom in root of sd card > folder dload > update.app)
7. Run stock rom , lest install, shut down phone
8. Run TRWP to install SuperSU/Superuser zip
8. Restore IMEI (on working rom)
9. Go to TRWP and Wipe dalvik cache
10. Now you have working newest stock rom with root
So :
1. You cant have trwp in lockedbootloader
2. If update fail on 2/2 IMEI is not "zero"
3. Pink LCD on "update mod" = no rom in sd card
Next :
Hold Vol Down + Vol Up + Power to forceupdate firmware mod
Hold Vol Up + Power to run TRWP or stock recovery ( hold about 5s)
Hold Vol Down + Power for fastboot mod (5s-10s)
If you now have locked bootloader , with stock recovery, and force update fail, you cant unlock bootloader and flash trwp > Last hope is in "oryginal" rom, your IMEI will not block it.
OmenHTX said:
OK, lest start from beggining
1.You must unlock bootloader by code ( first run check Lock / Unlock status ) (fastboot mod)
2. Flash TRWP (fastboot mod)
3. Flash SuperSU or Superuser zip (trwp)
4. Backup IMEI on running rom
5. Hack IMEI on running rom
6. Update phone by forceupdate flash update.app (rom in root of sd card > folder dload > update.app)
7. Run stock rom , lest install, shut down phone
8. Run TRWP to install SuperSU/Superuser zip
8. Restore IMEI (on working rom)
9. Go to TRWP and Wipe dalvik cache
10. Now you have working newest stock rom with root
So :
1. You cant have trwp in lockedbootloader
2. If update fail on 2/2 IMEI is not "zero"
3. Pink LCD on "update mod" = no rom in sd card
Next :
Hold Vol Down + Vol Up + Power to forceupdate firmware mod
Hold Vol Up + Power to run TRWP or stock recovery ( hold about 5s)
Hold Vol Down + Power for fastboot mod (5s-10s)
If you now have locked bootloader , with stock recovery, and force update fail, you cant unlock bootloader and flash trwp > Last hope is in "oryginal" rom, your IMEI will not block it.
Click to expand...
Click to collapse
Wait, let me put this in summary:
1.
- I have a locked bootloader.
- I can't unlock the bootloader because it says "recovery image verify failed".
- It can only mean one thing: my IMEI must have changed.
2.
- I have a TWRP recovery.
- At first, my original recovery was the stock when I have a locked bootloader.
- Then I flashed the TWRP recovery even if I have a locked bootloader and didn't warned me. (Shoudn't it be accepted to be flashed since I have a locked bootloader).
- In my experience, if I have a stock recovery when I'll hack my IMEI, it will format my cache and data and let me boot into my phone.
- If I have a TWRP recovery when I'll hack my IMEI, it will only redirect me to the TWRP menu.
3.
- I can access Force Upgrade.
- But it doesn't show any text. (For example: it doesn't show if it is unpacking or installing, only a bar.)
- When I access Force Upgrade, the loading stops at 1/4 of the bar. (So I'm not really sure if it failed at step 2/2.)
So my questions are:
1. Why can't I unlock my bootloader with my original IMEI's unlock code if my IMEI is not "zero"?
2. Why is it when I Force Upgrade, it doesn't show any text?
3. Why did fastboot accepted the TWRP recovery being flashed when my bootloader was locked?
And, what do you mean by "original"? Do you mean the B182 firmware upgrade, not the B175?
After hacking IMEI you cant have stock recovery, cuz you need root for shell script. So its not making "auto wipe" to change OEM info.
TRWP should not be installed on lockbootloader, but i dont make it ...
So , do you have working trwp or not ?
Oryginal firmware ... version when you get with phone, like my Y300-0100 branded T-Mobile PL B167
OmenHTX said:
After hacking IMEI you cant have stock recovery, cuz you need root for shell script. So its not making "auto wipe" to change OEM info.
TRWP should not be installed on lockbootloader, but i dont make it ...
So , do you have working trwp or not ?
Oryginal firmware ... version when you get with phone, like my Y300-0100 branded T-Mobile PL B167
Click to expand...
Click to collapse
I am sure i have twrp.
If i have a stock recovery, i would be able to boot into recovery.
Based in my experience:
1. To hack the imei, you must first root your phone.
2.a. Next, the phone will reboot, but it won't boot into system.
2.b. Fastboot, force upgrade, and recovery is still accessible.
3.a. If you have a twrp recovery when you hacked the imei and rebooted, it will redirect you to the twrp menu.
3.b. If you tried to restore from twrp recovery, it still won't reboot into system.
3.c. If you have a stock recovery, it will directly boot into stock recovery and format your cache and data and reboot to system (still leaves your imei to zero)
4. If you go to force upgrade, you can flash any official roms (leaves your imei to zero)
5. After you have flashed a rom or was redirected to stock recovery, your phone will reboot.
6.a. Then root your phone and restore imei then your phone will reboot.
6.b. If you have a stock recovery, it will wipe your cache and data.
6.c. If you have a twrp recovery, it will redirect you to the twrp menu (you can manually reboot into system)
Am i right?
And where can i get the original rom for my b182? There's no local huawei store here.
.vonpatrick. said:
I am sure i have twrp.
If i have a stock recovery, i would be able to boot into recovery.
Click to expand...
Click to collapse
So why you dont run TRWP and flash any rom in zip ?
OmenHTX said:
So why you dont run TRWP and flash any rom in zip ?
Click to expand...
Click to collapse
Twrp is not accessible if you have a locked bootloader.
bricked
I have a big problem. My Ascend y300 started to work strange yesterday, my PC didnt see the internal sd nor the external SD correctly. Today I restarted it and now I get blue screen when I start it. I had TWRP installed, but when I try to access it, it gives blue screen aswell. Any solutions?
gery0518 said:
I have a big problem. My Ascend y300 started to work strange yesterday, my PC didnt see the internal sd nor the external SD correctly. Today I restarted it and now I get blue screen when I start it. I had TWRP installed, but when I try to access it, it gives blue screen aswell. Any solutions?
Click to expand...
Click to collapse
Try this through fastboot:
fastboot erase recovery
fastboot flash recovery <path to recovery.img>
.vonpatrick. said:
Try this through fastboot:
fastboot erase recovery
fastboot flash recovery <path to recovery.img>
Click to expand...
Click to collapse
My problem is a little bit more complex unfortunately. I tried what you said. When I push the buttons to enter fastboot, my phone dont freez at splashscreen and I get bluescreen. When I connect it to my PC my PC recognizes it though, BUT ADB cant see it. I reinstalled the drivers any times, without success.
gery0518 said:
My problem is a little bit more complex unfortunately. I tried what you said. When I push the buttons to enter fastboot, my phone dont freez at splashscreen and I get bluescreen. When I connect it to my PC my PC recognizes it though, BUT ADB cant see it. I reinstalled the drivers any times, without success.
Click to expand...
Click to collapse
What did you do anyway why it got the blue screen?
.vonpatrick. said:
What did you do anyway why it got the blue screen?
Click to expand...
Click to collapse
That is the most strange part of the story. I totally did nothing. I opened bootloader, installed twrp, rooted it, installed init.d support, installed a ramscript. The phone worked totally fine until yesterday. I did a restart yesterday and bumm, bluescreen. And I did nothing before this happened. Srsly, no problems detected, it came from nothing...
gery0518 said:
That is the most strange part of the story. I totally did nothing. I opened bootloader, installed twrp, rooted it, installed init.d support, installed a ramscript. The phone worked totally fine until yesterday. I did a restart yesterday and bumm, bluescreen. And I did nothing before this happened. Srsly, no problems detected, it came from nothing...
Click to expand...
Click to collapse
Can't you really boot into fastboot (Power + up)?
Hold it for like 10 seconds.
If it still shows blue screen, try connecting it to pc, maybe it'll read it.
Then erase recovery and flash twrp.
Wipe everything and restore a backup you made.
.vonpatrick. said:
Can't you really boot into fastboot (Power + up)?
Hold it for like 10 seconds.
If it still shows blue screen, try connecting it to pc, maybe it'll read it.
Then erase recovery and flash twrp.
Wipe everything and restore a backup you made.
Click to expand...
Click to collapse
Well, my problem is, that despite of the blue screen, fastboot seems to work. My pc sees my device, BUT ADB refuses to see it, and I dont know why. I will try it from win xp under virtualbox now.
hi Gery
How do you manage to get the phone into fastboot mode?
my y300 also enters blue screen everytime now. I try to press voldown + power for like 10 seconds, yet the fastboot command is not working.
gery0518 said:
Well, my problem is, that despite of the blue screen, fastboot seems to work. My pc sees my device, BUT ADB refuses to see it, and I dont know why. I will try it from win xp under virtualbox now.
Click to expand...
Click to collapse
Well, that's perfect! If the PC can read the device from fastboot, you can erase the recovery and flash the twrp and restore from backup. But if it still goes blue, flash the system, data, cache, boot, recovery from your twrp backup.