I'm chilean and I try to write in English
The problem is that I update the Atrix with GingerBread 2.3.6 AT&T to the Leak 4.0 ICS with RECOVERY and then wanted install the gingerbread again with RSD Lite 5.6, but now the device show me the logo with this text "failed to boot 1" and then try again with RSD but the program was saying "error switching phone to bp pass through mode 0x70be" :crying:
so...
The phone is dead or is there any solution?
Thanks
turn your Atrix in Fastboot mode, flash bootloader unlock, flash recovery, 3x wipe, flash rom and addons.
For next time try to use fruitcake, not official SBF
ovitz said:
turn your Atrix in Fastboot mode, flash bootloader unlock, flash recovery, 3x wipe, flash rom and addons.
For next time try to use fruitcake, not official SBF
Click to expand...
Click to collapse
could you make me a mini tutorial of that you said please?
Im noob in this and I want to do this well, thanks
1. Power + up
2. plug your atrix to pc and run RSD on PC
3. flash sbf unlocker
4. turn your Atrix off and turn it with Vol down, than press Vol Up
5. connect Atrix to PC and run Fastboot on PC
6. type:
fastboot devices
fastboot oem unlock
fastboot erase recovery
fastboot flash recovery recovery_name.img
7. reboot Atrix into recovery
8. wipe data, cache and dalvik
9. flash rom, gapps and addons (if needed)
10. enjoy
Related
Following instructions here http://forum.xda-developers.com/showpost.php?p=20331623&postcount=6 to unlock/relock boot loader. Everything works fine until I flash the nopudding4u.sbf. After that I get the Failed to boot 4 message. Any help would be appreciated!
Photon4GUser said:
Following instructions here http://forum.xda-developers.com/showpost.php?p=20331623&postcount=6 to unlock/relock boot loader. Everything works fine until I flash the nopudding4u.sbf. After that I get the Failed to boot 4 message. Any help would be appreciated!
Click to expand...
Click to collapse
It says "Starting RSD Mode" after right? If you're trying to relock the bootloader, you should be able to flash any of the SBFs to get it locked again.
Correct - but this thread http://forum.xda-developers.com/showthread.php?t=1281528 suggests that you can relock, get back 4G and keep UbunTop & WebTop+. If I flash back an sbf such as 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf the phone is relocked but the original WebTop is installed.
Photon4GUser said:
Correct - but this thread http://forum.xda-developers.com/showthread.php?t=1281528 suggests that you can relock, get back 4G and keep UbunTop & WebTop+. If I flash back an sbf such as 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf the phone is relocked but the original WebTop is installed.
Click to expand...
Click to collapse
Webtop+/Ubuntop with 4G
Root-Unlock-Relock.zip
Flash 198_7 SBF then root, unlock and install CWM Recovery.
Flash WebTop+ 1.2
Factory reset phone Menu/Settings/Privacy/Factory Data Reset DO NOT SKIP THIS STEP
Reboot phone into fastboot mode: VOL down/Power. Use VOL down to scroll though options til you see "fastboot" then VOL up to enable. and connect phone to computer
Open command prompt in the moto-fastboot folder and type the following using the <enter> key after each command:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery stock_recovery.smg
moto-fastboot reboot
Disconnect phone from computer
Start RSD Lite on your computer
Reboot phone into RSD mode: VOL down/Power. Use VOL down to scroll though options til you see "RSD" then VOL up to enable.
Connect phone to computer.
Flash nopudding4u.sbf.
Close RSD Lite and disconnect phone.
Reboot phone
Thanks for the response. This is exactly what I was following - got this error after step 10 (tried 3 different times).
I'm digging through this to see where the issue is. I'll keep you updated.
Found the issue and fixed it.
Thanks! That worked! Appreciate the support!
This thread (and the link to the explanation) was very helpful. Lokifish Marz, you might want to make a note in the WT+ post (http://forum.xda-developers.com/showpost.php?p=17956277&postcount=2) for people to be sure to reflash the full 198_7 or 198_6 SBF and specifically not try to relock without full SBF flash (which is shown in the guide.htm in the Root-Unlock-Relock zip). Just to draw attention that the full SBF Flash is required, since I (probably like OP) tried the quickest/simplest route to relocking first.
Can sombody please help me with brief example on what to do i been trying this over a month now so i root my phone , i unlock the bootloader just fine also but i cant even clockmode my phone for reason wont read the recovery-photon3. w.e so i used the bootstrap so i can flash room and them but i already used couple from joker and 1 rocko and it got stock in the red logo and one of then reboot just fine but it force close eveything is called obexbootstraprock1.1? should i try to flash bootstraprocko3.0 or start from the first one and work my up?
can i just flash a room with out unlock my bootloader ? jus root and the bootstrap.apk file and if i can do that what what room should i used ? please i really need you help hope you understand my wrinting im leaving in honduras im from florida
If you're still unlocked a locked version won't work. Follow the videos to sbf back to stock. Make sure to download correct moto-fastboot and add the correct paths on your pc. Check the stickies in the development section and just use the videos to walk ya through it.
The links to all the files ya need will be in the videos.
Hope that helps.
Sent from my MB855 using xda premium
Jasonfnts1 said:
Can sombody please help me with brief example on what to do i been trying this over a month now so i root my phone , i unlock the bootloader just fine also but i cant even clockmode my phone for reason wont read the recovery-photon3. w.e so i used the bootstrap so i can flash room and them but i already used couple from joker and 1 rocko and it got stock in the red logo and one of then reboot just fine but it force close eveything is called obexbootstraprock1.1? should i try to flash bootstraprocko3.0 or start from the first one and work my up?
can i just flash a room with out unlock my bootloader ? jus root and the bootstrap.apk file and if i can do that what what room should i used ? please i really need you help hope you understand my wrinting im leaving in honduras im from florida
Click to expand...
Click to collapse
Seriously...how are you still having trouble?
1 - READ CAREFULLY
1a - Charge your phone to 100%
2 - Return your phone to stock. Boot into fastboot mode (power + vol down) and keep clicking down until you get to android recovery. Then select wipe data factory reset
3 - Boot into RSD mode (power + vol up)
4 - Plug your phone into the computer so the drivers install
5 - Open RSD lite on your computer and flash the 154_5 SBF
6 - Once that is done, reboot the phone and let it update automatically to 198_6
7 - Reboot into RSD mode
8 - flash the derpunlock.sbf
9 - Reboot the phone
10 - Root the phone and install Root Explorer
11 - rename install-su.sh file or whatever it's called to install-su.sh.bak
12 - Reboot the phone into fastboot mode
13 - flash the recovery of your choice version 5.0.2.7 using the fastboot commands (YOU MUST HAVE RECOVERY.IMG and moto-fastboot in the same directory)
moto-fastboot erase recovery
moto-fastboot flash recovery recoveryXXXX.img (or whatever you've named the recovery)
moto-fastboot reboot
14 - Reboot the phone into recovery
15 - Format the system
16 - Wipe data/factory reset
17 - Wipe cache/wipe dalvik
18 - Reboot Recovery
19 - Install ROM (zip from sdcard)
20 - Install Gapps if flashing CM9
21 - Reboot phone
22 - May want to repeat steps 14-21
23 - Reboot Phone again
24 - This is the last time I write all this out....
Hi all
I am in urgent need of help to fix my Atrix 4G.
The Story:
I have an Atrix 4G. It was on 2.2.4 then official update came and I updated it to 2.2.6.
Then I was wondering about installing custom rom. This was my first time to install a custom rom. So I googled and found.
Code:
http://forum.xda-developers.com/showthread.php?t=1398819
Neutrino ROM V2.9 [14/08].
So I rooted and unlocked my fone. My fone was successfully rooted and unlocked and I restarted it and there was Unlocked written on Booting Screen.
In this procedure I had to reset the phone so it was back to 2.2.4.
After that I downloaded the above rom put in in SD Card and Downloaded Recovery APK from market and it asked to restart the phone with power adapter plugged to start so I did the same. And recovery started. Then following the instructions I installed the custom rom and it was installed successfully it was my first time so I didnt took any backups unfortunately. So after installation the phone did'nt actually start. It was stuck on Booting Screen with Moto Logo.
So I again googled and started to find the solution some said restart some said remove battery some said wait I tried all but no result.
Then I tried to install the stock rom.Following this
Code:
http://androidforums.com/atrix-4g-all-things-root/510778-flashing-back-stock.html
When i start to run RSD lite it says Creating Image and then throws an error like Unable to send RAM files.
Now I want to fix my Atrix 4g and there is no backup and no recovery mod.
My fone can go into options like Fastboot and RSD Protocol Mode. I mean I can access options on pressing Power and Volume Up/Down buttons.
Can any one please tell me solution? I will be very very thankful.
In fastboot flash recovery
fastboot devices
fastboot erase recovery
fastboot falsh recovery recovery.img
fastboot reboot
Go to recovery mode, try to wipe data, cache and dalvik. If you have Neutrino rom on your internal SDcard you can flash it with recovery.
ovitz said:
In fastboot flash recovery
fastboot devices
fastboot erase recovery
fastboot falsh recovery recovery.img
fastboot reboot
Go to recovery mode, try to wipe data, cache and dalvik. If you have Neutrino rom on your internal SDcard you can flash it with recovery.
Click to expand...
Click to collapse
I have erased data many time from the Android Recovery
And I think there will be no recovery.img. Where can I get it??
There is option of data and cache partition wipe but there is no option like Dalvik.
Can you please guide me it was my first time with custom roms and I didnt took any backups.
in fastboot package is recovery...
ovitz said:
in fastboot package is recovery...
Click to expand...
Click to collapse
Thanks, Fortunately my senior has installed Custom rom in it. And it is working fine with custom rom.
first let me say I do not have a RAZR and have searched. I have a friend who was rooted, tried to unroot and install the OTA JB update. He is now stuck in fastboot. His PC will recognize his phone but doesn't show as available like it should. (I have the Note 2 and mine shows under "computer" when connected). he's tried running the razr utility and it fails then says he's back on original version. He can get into bootloader but not into recovery. He says it back the to AP Fastboot screen and then it says boot failed. He was rooted but on stock. he tried to install the JB update both OTA and through his external SD card. can anyone help? does the razr not use odin?
I don't understand exactly your problem. Would you like to flash stock ROM with fastboot recovery? Then you have to
1) install latest Motorola driver package
2) install RSD lite tool
3) boot phone to fastboot recovery
4) connect USB to computer
5) download fastboot package of you choice, exctract it and choose included xml-file in RSD lite
6) start flash and wait until it's finished
he's stuck in a repeat boot. he told me it was a fastboot but I didn't clarify if that meant it was a regular repeat boot screen or if it was the fastboot recovery screen. I didn't realize how different the razr was from my samsung phones. sorry if I am not making sense. He's in SC and I'm in AR so I am only going on what he is telling me.
I assume that he stucks in fastboot recovery.
The only chance to get the device working again is to flash ICS stock ROM with RSD lite.
AcidAngel21 said:
I assume that he stucks in fastboot recovery.
The only chance to get the device working again is to flash ICS stock ROM with RSD lite.
Click to expand...
Click to collapse
can you point me to where I can tell him how to do this? and with links to install please too thank you!
Try this: http://www.droidrzr.com/index.php/t...inux-all-in-one/page__pid__227369#entry227369
http://forum.xda-developers.com/showthread.php?t=2155576
Check out 2nd video.
I would also post links to fastboot files, motorola driver package and RSD-Lite, but unfortunately I'm not allowed to do with <10 posts
By the way, are you XT910 (GSM) or XT912 (CDMA) user?
Would you like to flash ICS or JB?
Note that for JB no fastboot files exits up to now. JB can not be flashed with RSD-Lite.
I'm currently on the Verizon JB version on a GSM XT910 phone.
My question is can I use the following procedure to go back to ICS ?
1. Restore cid through BMM.
2. Reboot to AP fastboot mode.
3. Flash ICS with RSD lite.
Thanks in advance.
desertmod1 said:
I'm currently on the Verizon JB version on a GSM XT910 phone.
My question is can I use the following procedure to go back to ICS ?
1. Restore cid through BMM.
2. Reboot to AP fastboot mode.
3. Flash ICS with RSD lite.
Thanks in advance.
Click to expand...
Click to collapse
I've tried this about five times and I'm currently still trying to figure this out. I don't think It's going to work that way because Jelly Bean has a different kernel than ICS. I have tried flashing an ICS rom with safe strap and then flashing the fastboot ics files with rsd lite but I haven't been able to get it to flash the ICS rom.
Did you try this ?
1. Flash the fastboot files using rsd lite
2.Then enter into recovery and wipe your data and cache.
3.Power off your phone Reboot using bp tools
3. Root your device
Remember while rooting when the tool reboots your device press the vol- and vol at the same time when the phone switches off to enter in boot menu mode and reboot using bp tools mode, other wise u will see a black screen everytime you reboot.
4. Once done restore your cid using terminal emulator.
code: dd if=/sdcard/cid.img of=/dev/block/mmcblk1p18
Click to expand...
Click to collapse
Source: http://forum.xda-developers.com/showthread.php?t=2078021&highlight=cid+bmm+ics
As I know, everyone tells, that there is no way, to come back from JB to ICS with Mororola Razr.
tie7 said:
As I know, everyone tells, that there is no way, to come back from JB to ICS with Mororola Razr.
Click to expand...
Click to collapse
Yes that's true for the Vodafone version being flashed with RSD.
I flashed the Verizon version with the cid trick.
I have this version: http://forum.xda-developers.com/showthread.php?t=2182674
I used this method to install it:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
Click to expand...
Click to collapse
For future reference, I did the razrguy method above:
1. Flash the fastboot files using rsd lite
2.Then enter into recovery and wipe your data and cache.
3.Power off your phone Reboot using bp tools
3. Root your device
Remember while rooting when the tool reboots your device press the vol- and vol at the same time when the phone switches off to enter in boot menu mode and reboot using bp tools mode, other wise u will see a black screen everytime you reboot.
4. Once done restore your cid using terminal emulator.
code: dd if=/sdcard/cid.img of=/dev/block/mmcblk1p18
Click to expand...
Click to collapse
But step 4 didn't work for me so I used BBM to restore the cid.
you can easily restore the cid in the AP Fastboot mode, just put the cid.img file in the fastboot folder, then use this command:
fastboot flash cid cid.img
and reboot