I'm just received my MHL cable. I plugged everything up the correct way and its not picking up the signal. Is there something I missed? Do I need an app? Could it be the Rom I'm using or the kernel? I need help guys thanks.
Sent from my PG86100 using xda premium
It could be the rom and/or the kernel. What are you running for the rom and what kernel?
Having the same problem but in my case It used to work but suddenly when I connect my phone back to the TV my phone din't pick the cable could it be a damage adapter or it's it another thing
Sent from my PG86100 using XDA
I had the same problem. At first, it was that the kernel and ROM I was using didn't support MHL. Make sure you have a working combination.
But eventually- I ended up with stutter, snow, lines across the screen and/or no sound or picture. After much frustration and testing with 2 cables, 2 adapters, 2 TV's and then a new Evo3D in store - it turned out the problem was hardware related. My MHL port must have gone out.
I've since replaced it under insurance - and after 2 tries, got a refurb that seems to work flawlessly *knock on wood*.
Related
Just like the post says my hdmi works sometimes and most of the time it doesn't. I had it working last night watching nerflix and it just stopped, same thing happened today. I am running a Zone23 Rom and bcblend 02 kernel. The mhl adapter I am using is from T-Mobile. Does this happen to anyone else, is the a solution I can try? I just ordered the htc adapter to try that and I have already switched hdmi cars to see if that was it and it wasn't. Any help I would appreciate.
Sent from my PG86100 using xda premium
did you connect the power cable as well?
Yes, I know I didn't mention it but yrs the power cable is attached and working, I guess it was my fault for not clarifying it better, it use to work whenever I plugged it in not it is hit in miss with a mostly miss.
Sent from my PG86100 using xda premium
sounds like a loose connection. probablly a faulty hml adaptor.
Also, sometimes when it kind of was acting like it wanted to work it would cut on cut off like someone was flicking a light switch on and off.
Sent from my PG86100 using xda premium
Well I ordered a HTC mhl adapter and the same thing happen. So I ended up restoring a rooted stock rom, re-applying all my apps, backing up my new setting, wipeing and re-installing my Zone 2.3.4 ROM and re-applying my new setting and it still didn't work.....LOL
But it now works on my 55 inch vizio but not my 46 inch Sony in my bedroom where I would use it the most.
I don't know what the problem is with the Sony because it use to work flawlessly but now it doesn't even read it. I know its the tv because I have swapped everything else, hdmi cable, charger, and mhl adapter. If anyone knows what may have caused my tv to stop reading my mhl adapters please let me know?
Sent from my PG86100 using xda premium
Your TV port probably failed. I know hdmi ports look robust like a usb port but they really aren't.
Well my tv has 5 ports and none of them are working with the mhl adapter but the still work with my DVD player though.
Sent from my PG86100 using xda premium
Old thread but I may be able to help others.
I have a generic HML adapter from ebay and I found that you need to connect things in the correct order to make it work reliably. I had the best results following these steps.
1. Connect power to the adapter
2. Connect the adapter to the phone
3. Connect the HDMI cable to the adapter
With the stock rom I found a reboot of the phone between step 2 and 3 sometimes helped but generally it was not needed. With the leedroid rom I using now I've never needed to reboot.
Unfortunately my 52" Samsung LCD (2008) has no audio but my 24" Samsung LED (2011) works perfectly every time. I got audio to work 2x on the 52" but I can't for the life of me figure out how.
Just to further update....
I found a firmware update for my 52" Samsung TV on their website. After applying the update I found the HDMI to slightly more reliable with my audio issues but it still did not correct it 100%. I have audio issues 1 out of 4 times now so by my best guess the TV has to comply with the newer HDMI specs in order to operate with the MHL adapters.
Hopefully this helps someone out there.
Appreciate the tip, so how does one update their tv
Sent from my PG86100 using xda premium
I've regularly been using my MHL port to transfer video to my TV's - and to my girlfriend's tv when visiting.
Recently - after finally rooting and using a couple different ROM's, I'd noticed my MHL output had steadily gotten worse. First it was a matter of the audio not getting transmitted with the video, but usually disconnecting and reconnecting and/or resetting my phone would restore proper HDMI output. But eventually, my Toshiba TV was not registering input at all. Testing on my LG TV - I get a scratchy signal and may lose it all together while jiggling the phone's USB port.
I've tested with 2 different HDMI cables, and 2 different MHL adapters. The results are similar. Actually - with one of the adapters I no longer get a signal at all, with the other one I get a good deal of snow and audio crackle. Which is odd, because I thought that being digital - I'd get a signal or nothing?
I'm pretty sure it's a hardware issue, but does anyone think going to another ROM might help? Perhaps usb or mhl drivers getting screwed up? Failing that - I'm thinking of going to a Sprint service center to see if the USB port might be replaced under my insurance coverage. Any advice?
Yes, go back to stock everything and see if that resolves it. I've found some roms and kernels and different combinations break mhl or make it unreliable.
In fact, I had the same EXACT things happen you're describing. Couldn't get it to display to the TV. I gave up, then tested it on my pc monitor that has an hdmi port, worked every time. Then I thought it was the tv or something. went back to the stock kernel eventually, it worked perfect each time. I'm stock everything with a few minor mods, works great.
Hmmm, that's odd - I'll have to go to a mostly stock rom then. Which one do you suggest?
I'm literally stock, no variation. Just added leeroid tweaks and a few app mods, that's it. Not sure what else would work.
Sent from my PG86100 using XDA App
I searched up "MHL hdmi" and got a few threads from other phones forums on XDA; half were before our phone came out or the cable was available.
My question is which mhl adapter actually works on our phones (i777)
I've seen a large variety out there; ranging from white to black, 2 cables or 1 cable +inlet for power cable, "samsung" imprinted mhl adapters, and OEM ones.
I've read some distort the phone screen while connected to the tv, others cut off wifi while connected, some OEM can use remotes to operate the phone, while others didn't or OEMs not performing properly.
I've seen generic ones from $6 up, OEM logo'd ones at $6 and OEM packaged ones at $33+
Do we have a specific model/brand sure to work without error? Using TV remote is a plus. I've seen some for sale with wireless mini keyboards (bonus) and that catches my eye
Sent from my SAMSUNG-SGH-I777 using XDA
I'm personally just using one random black one I got on ebay, seems to work fine.
I would THINK MHL is a standard, and though some might not function QUITE as well as others, they should all serve their basic purpose.
I haven't seen any that don't require USB power though, mind linking to the one you've found? Maybe link the ones with the Mini Keyboards...? I'm interested.
Check out this item I found on eBay:
iKross MHL Adapter+Wireless Keyboard For Samsung Galaxy S2 I9100 i777 Nexus Note
Link: http://www.ebay.com/itm/iKross-MHL-...Galaxy-S2-I9100-i777-Nexus-Note-/270941494794
(Sent from eBay Mobile for Android)
Sent from Yahoo! Mail on Android
Sent from my SAMSUNG-SGH-I777 using XDA
Theres so many now its everywhere. As far as working my retail samsung hdtv smart adapter,name.on box i paid about 25$. It still works perfect and.ive had.it since this phone came out. Also just for the heck of it tried.it earlier.works.fine.in.ics too.
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Can you navigate the phone with TV remote? Do you have to do something special to make it work?
Sent from my SAMSUNG-SGH-I777 using XDA
Edgarhighman said:
Can you navigate the phone with TV remote? Do you have to do something special to make it work?
Sent from my SAMSUNG-SGH-I777 using XDA
Click to expand...
Click to collapse
I second this question. If it can Navigate the phone, I'm sold. (I would assume it can otherwise what's the point?)
Does any ics build support mhl yet?
I'm using the one from the Samsung Infuse and it works perfectly. I don't know about this TV remote thing since I have a BT ps3 media kb I use.
Excuse my typos, sent from my SGS2 using Tapatalk.
I bought a mhl to hdmi cable I'm new to this I plugged it into my phone and hdmi but got nothing then I also hooked up USB power to it when I did that it showed a input for it on my TV but still no video does this not work with ics?
It works with ics. Try this, plug hdmi cable from tv to adapter plug power cable from wall adapter charger to adapter. Then plug into phone. Also what kind of mhl adapter do you have? I personally went through a few and ended up with getting the samsung one for me it works the best. Others had flaky power adapters or reports of doa. Anyway try again like that if it doesn't work try changing hdmi cables I've seen people have that as their cause as well. Also I can tell you that mhl and blue tooth and wireless work awesome on ics better than gb. I can even use it with a ps3 controller etc..
Sent from my SGH-I777 using xda premium
I don't think it works on AOKP or CM9, without installing an extra app. I've been using it on SHOstock 2 just fine. I think the TW ROMs have the support built in. I know 2.3 MIUI does not support MHL.
It only needs the power adapter if your TV does not support MHL. If your TV is MHL compliant it will send power over the HDMI port and charge your phone. The standard is still new, almost no TVs support it yet. You can still mirror the screen over HDMI with a MHL adapter, but you have to power the adapter. MHL compliant TVs should be able to control the phone through the TV, but because those TVs are as common as unicorns I haven't tested it. With a non MHL compliant TV all it does is accept the input from your phone. You must still navigate on your phone. But, you can use a Bluetooth keyboard and/or mouse to control your phone wirelessly.
I got the cheapest MHL adapter on eBay that shipped free from inside the US. I think I paid ~$7. Its worked fine for me over the past 6 months.
Sent from my Galaxy S II (i777)
Im running ICS 4.0.3 SHOstock2 v2.2.4 with 3.0.30-cherrypicker kernel on my AT&T Samsung Galaxy S II i777. I purchased a MENOTEK MHL to HDMI adapter and Im trying to use it with my RCA Plasma TV. I connect the adapter to the HDMI cable then the power cable to the Adapter, and then I connect the adapter to my phone. The tv recognizes that I have the HDMI cable plugged in then the screen goes black. While I have the adapter plugged into the phone, the phone works fine, only there isn't anything being displayed on the screen. I try to launch several video apps, still nothing. The weirdest thing is when I unplug the adapter from my phone, it causes the phone to freeze and I have to pull the battery to restart. Is anyone else having a simular problem and may know of a fix. Ive done a few searches but havent been able to find anything. I appreciate any help that I can get.
I would ask in the SHOstock thread. It worked fine for me, but I switched to AOKP. The last SHOstock I tried MHL was 2.2 I think. I would guess its a kernel thing. Maybe try another kernel?
Sent from my Galaxy S II (i777)
Thanx! I will definitely look into a different kernal. The only problem with asking on the SHOstock thread is my account is new. I don't have enough posts to comment on that thread.
Sent from my SGH-I777 using XDA
it should work with shostock I've been using it with phone bricker works good. The only roms that won't work at least as of now is aosp aokp roms cause our bases are derived from Samsung bases international or otherwise which contain it. A long time ago entropy told me something along the lines of the mhl code being proprietary closed source which is why cm9 etc doesn't have it. But with ics and the huge user base if anyone is talented enough to get that working they will.
Sent from my SGH-I777 using xda premium
Also for the TV remote in the other post is correct at least what I'm pretty sure your talking about. Cause a friend of mine just got one of those new voice/gesture etc Sammy TVs and they have mhl,dlna etc. Honestly at that point you aren't concerned with a phone remote when you can just use gestures and voice
Sent from my SGH-I777 using xda premium
I got a sharp aquos with viperdrive (2007 gaming LCD)
Sent from my SAMSUNG-SGH-I777 using XDA
Nizda1 said:
it should work with shostock I've been using it with phone bricker works good. The only roms that won't work at least as of now is aosp aokp roms cause our bases are derived from Samsung bases international or otherwise which contain it. A long time ago entropy told me something along the lines of the mhl code being proprietary closed source which is why cm9 etc doesn't have it. But with ics and the huge user base if anyone is talented enough to get that working they will.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I updated to the most recent update ShoStock 2.2.6 but I still seem to have the same problem. The television screen is blue before I Connect the phone. Once the phone is connected the screen goes black but doesnt mirror the phone screen. When I unplug the phone from the adapter it become unresponsive and I have to reboot. I starting to think the adapter may be DOA
SaXaPhIDeSoUl said:
I updated to the most recent update ShoStock 2.2.6 but I still seem to have the same problem. The television screen is blue before I Connect the phone. Once the phone is connected the screen goes black but doesnt mirror the phone screen. When I unplug the phone from the adapter it become unresponsive and I have to reboot. I starting to think the adapter may be DOA
Click to expand...
Click to collapse
I'm with you in the ShoStock MHL woes. Some say it works, it hasn't been working for me. The adapter is not DOA if the screen is going black and changing on the TV. My TV (Samsung) recognizes there is an MHL device connected with AnyNet+ but the screen goes black as well. The adapter worked on GB Roms, Unnamed/Unoriginal to be exact. Will try out PhoneBricker.
Edgarhighman said:
Check out this item I found on eBay:
iKross MHL Adapter+Wireless Keyboard For Samsung Galaxy S2 I9100 i777 Nexus Note
Link: http://www.ebay.com/itm/iKross-MHL-...Galaxy-S2-I9100-i777-Nexus-Note-/270941494794
(Sent from eBay Mobile for Android)
Sent from Yahoo! Mail on Android
Sent from my SAMSUNG-SGH-I777 using XDA
Click to expand...
Click to collapse
I'll vouch for that general design of the keyboard, seems like Ion knock-off.
Hey guys! I am loving this phone....did not know how much I would love it!! Anyways, I just wanted to check with other LTEvo owners and see if I'm the only one with this issue. I have had a lot of charging issues with the evo 4g in the past, so I'm not too happy with this and wanted to see if others are experiencing this issue.
I noticed that if I charge my phone laying on a flat service ( like the carpet, or counter) where the cord is not left hanging, it will not charge. I've been thinking of returning it for a new one if no one else has this issue. Any input would be greatly appreciated!
I am not have any problems at all.. I would return it.
Sent from my EVO using xda premium
I haven't had any issues...are you sure it's the phone and not just the cable? If it happens with multiple cables it's most likely the charging port. It's much easier to replace a cable though so I'd make sure to eliminate that as the possible problem first.
What cable are you using? I've went through several monoprice cables because of this. I'm now using cables from amazon basics, so far so good. I don't use stock because they are too short
Sent from my EVO using Tapatalk 2
Yea I would check multiple cords and see if it's the cord you're using or the charger port. I had an issue with my Evo 4g where the port was physically separated from the motherboard, and I had to rely on external batteries and a battery charger to use my phone. I hope this issue doesn't crop up with the 4g LTE.
If it's the port, return that shiz and get a new one.
So, quick question for folks.
The other day I noticed that despite my phone listing itself as charging, the battery was still dropping. Other times I could get it to charge ok. Today I noticed that wiggling the cable triggered the charging sound, but no change in the status.
After that, it got really worrying. The phone no longer would indicate a charge on that cable. I borrowed a friends s3 cable (I should mention that this is a generic cable, not the s4 cable I am using), and thst went straight to charging. After that, the generic cable worked.
I am going to try to test more today and tomorrow with the official cable.. but has anyone else had an issue like this? My worry is that it is the phone. . If it is, I want to exchange it now before there is the chance of getting a replacement with the locked bootloader. .
Sounds like it's the charger to me.
Sent from my Nexus 7 using xda premium
Ryno77 said:
Sounds like it's the charger to me.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I agree. My S4 charger works fine. Others struggle and have that same issue.
Sent from my SCH-I545 using xda app-developers app
Yea, I also get some problems when not using the stock S4 cable. Seems otherones fit but have a little play to where if I bump then even the slightest it reconnects.