Hello everyone,
I was trying to restore using Safestrap. I have done this before using the same exact file on the same external SD card. When it was done I got the "successful" message and rebooted the phone. But now the phone will not boot. I get the red DUAL CORE logo for a 1/2 second then I get the following message in white letters...
AP Fastboot Flash Mode (S) (Boot Failure)
0A.60
Device id LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB Data Cable
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X0056)
Invalid CG OTV (CG: system)
I can get it into the menu by pressing both volume buttons and power button. But no matter what option I get, it results in the above response.
Can anyone help me with this please?
blackhawk007 said:
Hello everyone,
I was trying to restore using Safestrap. I have done this before using the same exact file on the same external SD card. When it was done I got the "successful" message and rebooted the phone. But now the phone will not boot. I get the red DUAL CORE logo for a 1/2 second then I get the following message in white letters...
AP Fastboot Flash Mode (S) (Boot Failure)
0A.60
Device id LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB Data Cable
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X0056)
Invalid CG OTV (CG: system)
I can get it into the menu by pressing both volume buttons and power button. But no matter what option I get, it results in the above response.
Can anyone help me with this please?
Click to expand...
Click to collapse
You have to flash a rom with RSD lite, pick a file from here:
http://forum.xda-developers.com/showthread.php?t=1362956
Thanks
Sent from my XT910 using Tapatalk
Related
I have a Razor from rogers, i got it 2ed hand. i was not paying attention and installed the ICE update that rogers rolled out and it installed but locked up and was rebooting at random. I tried unlocking the boot loder to install a copy of the rogers Blur_Version.651.167.3331.XT910.Rogers.en.CA but when i rebooted it after trying the unlock it goes to:
AP fastboot flash mode (S) (boot failure)
0a.6c
to retunt to normal mode first press power key to powe down
device is locked. stats code 0
battery ok
OK to program
transfer mode:
USB connected
Invalid CG OTV (CG: system): Invalid SP data
Invalid CG OTV (CG: system
Invalid CG OTV (CG: system)
what do i do i have no idea and all my searching has not yelled any ideas
btf16 said:
I have a Razor from rogers, i got it 2ed hand. i was not paying attention and installed the ICE update that rogers rolled out and it installed but locked up and was rebooting at random. I tried unlocking the boot loder to install a copy of the rogers Blur_Version.651.167.3331.XT910.Rogers.en.CA but when i rebooted it after trying the unlock it goes to:
AP fastboot flash mode (S) (boot failure)
0a.6c
to retunt to normal mode first press power key to powe down
device is locked. stats code 0
battery ok
OK to program
transfer mode:
USB connected
Invalid CG OTV (CG: system): Invalid SP data
Invalid CG OTV (CG: system
Invalid CG OTV (CG: system)
what do i do i have no idea and all my searching has not yelled any ideas
Click to expand...
Click to collapse
How did you unlock the bootloader? You should try doing my recovery process, just be sure to have a copy of the Rogers OTA update on an external SD card...
You can't unlock boot loader on the RAZR... you could follow danifunker's instructions in the Rogers ICS OTA thread to flash gb base and upgrade to ICS I believe that should be enough to fix a faulty upgrade...
Sent from my XT910 using xda app-developers app
I have a bricked Razr. The only screen I can get to is the AP Fastboot Flash Mode (S) (Boot Failure)
OA.6
To return to normal mode-first press power key to power down
Device is LOCKED. Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG OTV(CG:webtop): Invalid SP Data
Invalid CG HAB (CG: webtop, status; 0X0056)
Invalid CG OTV (CG: webtop)
Needless to say, cannot charge the phone. And no matter what I press or try to do, it always comes back to this screen. Is this fixable? I am willing to send it for a fix, does anyone do that type of stuff?
Thanks
You need to flash the ics stock version with rsd lite, that will unbrick your phone. That tool saved my phone more than once
Enviado desde mi XT910 usando Tapatalk 2
you need to charge the battery first. read Q&A for how to.
then flash firmware for your region with RSD
Hi guys! I need help!
I have tried to flash my RAZR XT910 (EMEA) but something goes wrong and it's bricked.
Now I can use AP Fastboot only and If I select "Normal Powerup" or "Recovery" or "BP Tools", I get the "Dual Core" Motorola logo for a while, and then the following screen:
invalid flash mode (s) (boot failure)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
device is LOCKED, Status Code: 0
Battarey OK
OK to Program
Transfer mode:
USB Connected
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X0056)
Invalid CG OTV (CG: system)
I flashed the ROM Blur_Version.673.94.324.XT910.MERetail.en.06 (6.7.3-94_SPI-324) - Retail Asian through RSD, the result was Sucess, but it's not help.
Please help me to resolve this problem!
SOS! help needed!!
http://sbf.droid-developers.org/umt...PDRICSRTCEE_HWp2b_Service1FF_fastboot.xml.zip
Flash this one.
Gesendet von meinem XT890 mit Tapatalk 2
I just tried. Same result :crying:
Does anyone have any solution?
Stayers said:
Does anyone have any solution?
Click to expand...
Click to collapse
Go to recovery, make the wipes and flash the stock rom again
Semseddin said:
Go to recovery, make the wipes and flash the stock rom again
Click to expand...
Click to collapse
I can't go to recovery. If I select "Recovery", I get the "Dual Core" Motorola logo for a while, and then the following screen again:
invalid flash mode (s) (boot failure)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
device is LOCKED, Status Code: 0
Battarey OK
OK to Program
Transfer mode:
USB Connected
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X0056)
Invalid CG OTV (CG: system)
The only screen I can get to is the AP Fastboot
you need to get the factory cable from ebay and flash sbf for your region
romdroid. said:
you need to get the factory cable from ebay and flash sbf for your region
Click to expand...
Click to collapse
I flash with a factory cable, i made it with this video: http://www.youtube.com/watch?v=XwwI_6doBWk
somebody else can help?
I flashed stock ISC (SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIGNED.xml) with RSD 5.7. The result was "PASS" but i still have a same problem! =((((
What can i do else? Maybe i can erase all partitions and flash it again?
fastboot erase userdata
fastboot erase cache
fastboot reboot
it didn't help me =(
factory cable
romdroid. said:
you need to get the factory cable from ebay and flash sbf for your region
Click to expand...
Click to collapse
What is the difference between factory cable and normal cable? Will I able to flash official stock with factory cable?
Hello!
My phone: XT910
Stock rom: ICS
Safestrap 3.11
2nd rom: AOKP (http://forum.xda-developers.com/showthread.php?t=2162827)
So then I decided to flash new kernel:
http://forum.xda-developers.com/showthread.php?t=2223517
JBX-Kernel-1.0-Hybrid_2013-08-30 was flashed, starting picture was changed to the JBX, but aokp rom stopped to load.
As written in tutorial I have flashed rom and gapps. And everything become fine.
I have tried several times to flash your kernel, but it was the same.
Then I downloaded Edison version of the kernel, and my phone become a brick
i have smth like this:
Code:
AP Fastboot Flash Mode (S) (Boot Failure)
0A.77
eMMCInfo: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code: 0
Battery Low
Cannot Program
Connect USB
Data Cable
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status 0X0056)
Invalid CG OTV (CG: system)
The only menu that I can reach is "AP Fastboot". Please,help me if you have an idea how to unbrick it
P.S: Now my phone is detected as SPYDER_S by RSDLite (like a XT912, am I right?)
I have a xt912 that i tried to root and install a custom rom. It all went successful. I was installing CM11 from custom recovery. It showed that the installaion was not successful. It did not turn on so I used Droid Razr Utility (which was successful previously) to flash it back to the stock firmware. It said thhat battery is low so it couldnt flash the stock rom. Now its stuck in fastboot mode and battery is low. When I reboot to bootloader and select the last option that says "tools", it does nothing and there is a text that says ap fastboot flash failure. I am now stuck. Can you help me out
Hi,
You need to charge the battery to do anything at this point. Here's a thread about that... You can ask for help on it here too..
http://forum.xda-developers.com/showthread.php?t=1549625
Good luck!
tried it, not working
@Darth I have tried it, its not working. After the motorola logo there is a screen that shows the following text:
Invalid flash mode (S) (Boot failure)
0A.77
eMMC Info: Size 16G
To return to normal mode- first press power key to power down
Device is locked, status code: 0
Battery low
Cannot program
Connect usb
Data cable
Invalid CC OTV (CG: system): Invalid SP data
Invalid CC HAB (CG: system, status: 0X004E)
Invalid CG OTV (CG: system)
I will have your thread moved to your device section.
?