My dock arrived a little while ago, so I charged it and then connected to the tablet. It showed that an update was available so I installed the update.
While the mousepad works and it is currently charging the tablet ... none of the keys seem to work.
Any idea what could be wrong? Is mine defective or is there a simple configuration I'm not aware of? Just in case I disabled Thumb Keyboard and I have the Asus keyboard selected (Use physical keyboard is set to ON as well).
Pull tablet out of dock.
Put tablet back in dock.
Fixed?
Unfortunately no. Same situation. Cursor and multi-touch work, but no keys.
Should I assume no one has seen this issue?
try lock key
In the upper right? Doesn't appear to do anything
raistlin_ht said:
My dock arrived a little while ago, so I charged it and then connected to the tablet. It showed that an update was available so I installed the update.
While the mousepad works and it is currently charging the tablet ... none of the keys seem to work.
Any idea what could be wrong? Is mine defective or is there a simple configuration I'm not aware of? Just in case I disabled Thumb Keyboard and I have the Asus keyboard selected (Use physical keyboard is set to ON as well).
Click to expand...
Click to collapse
Did you try the keyboard prior to the update, or is this a new problem post update?
Sent from my CM7 Supersonic
rockcrawler said:
Did you try the keyboard prior to the update, or is this a new problem post update?
Sent from my CM7 Supersonic
Click to expand...
Click to collapse
Unfortunately I didn't try it prior to the update since the notification appeared basically right away.
At that point I had only used the pad to move the cursor around. So it is possible the keys never worked, but I suppose it is also possible they worked pre-update.
dock problems of my own
I got the transformer about a little less than a week ago, installed the update, everything was fine. today i got the dock, it seemed to work, saw the firmware update, clicked to update, "Update Failed." Tried again, again failed. Now the transformer doesn't even recognized that its connected. No matter what I do, it won't be recognized... what should i do?
Thanks in advance.
Hi
yesterday, I bought my TF with keyboard. After playing a while, I decided to root them. After succesfully rooting process I installed custom ROM (3.1 from moDaCo page) . It was all the time inserted into dock station but for customising I pull it out. When I insert TF to dock the keyboard stops response. TouchScreen was active. I saw small icon with "!" that update for dock station failed. I re-run the update process (using touch navigation) but it won't progress at all (still 0). Then I reboot TF, and try to start update again. With success. Now all is working perfectly.
Maybe this description helps you somehow.
good luck.
Keyboard not working
I am now experiencing the original issue from this thread. I can not find any other threads describing this exact issue.
Here is the message that I sent Asus support. No reply yet.
--------------------------------------------------------------------------------
Keyboard on my docking station stopped working. no errors it just stops. Battery still charges the tablet....Touchpad still works (and buttons)....closing and opening the tablet still shuts off and turns on screen.
No keys work. If I disable the keyboard through the android interface (Use Physical Keyboard = Off) the onscreen keyboard works fine (Current Keyboard is set to ASUS Keyboard).
I have tried
multiple apps
rebooting
undocking and redocking
hitting every key one at a time
hitting every key at the same time
closing the tablet and reopening it
device has not taking any shocks
battery is full
no contact with water
Last time I touched it it worked. it just stopped working.
Here is some additional information that I have learned.
I have tried a second keyboard dock and it does not work either.
I have done a restore to factory state with no change.
Tablet: B50 32gb Not Rooted and current on all asus updates.
Keyboard: B60 no updates available from asus.
I have the same issue
First, put your keyboard on another tablet and make sure the keyboard works. If the keyboard fails on two tablets the keyboard ribbon tape in the dock may be bad, e.g. RMA.
Then, two steps that might work:
(1) reapply the latest update via manual update
(2) factory reset
Might try in any order:
1 & 2
2 & 1
others.
Good luck.
Bob Smith42 said:
First, put your keyboard on another tablet and make sure the keyboard works. If the keyboard fails on two tablets the keyboard ribbon tape in the dock may be bad, e.g. RMA.
Then, two steps that might work:
(1) reapply the latest update via manual update
(2) factory reset
Might try in any order:
1 & 2
2 & 1
others.
Good luck.
Click to expand...
Click to collapse
As i stated above i tried two docks and both experienced the issue.
Mine started while the dock was plugged in so a damaged port is unlikely.
As stated above a factory reset has already been done.
I downloaded the firmware updater from the asus ftp site and extracted the asus folder to /microSD with no effect. I can't get a manual update to run. What might i be doing wrong.
I confirmed that the downloaded firmware and current firmware are US
I Confirmed that the zip file is in /asus/update
Sent from my Transformer TF101 using Tapatalk
sancmat said:
...
I downloaded the firmware updater from the asus ftp site and extracted the asus folder to /microSD with no effect. I can't get a manual update to run. What might i be doing wrong.
I confirmed that the downloaded firmware and current firmware are US
I Confirmed that the zip file is in /asus/update
...
Click to expand...
Click to collapse
Might check:
download file corruption
file name extension .zip or .ZIP ?
various folder locations, e.g. root folder microsd vs update
directory or filename might be case sensitive?
I searched for instructions from a couple threads and the ASUS pdf and tried a few things before it worked for me. I do not remember exactly which worked, sorry.
Best wishes and good luck!
This worked for me:
1.Make it so your screen is set to "NEVER" turn off. Put max brightness, maybe play a game or something. Let your battery die. (without the dock)
2.Charge your pad without the battery until it's 100% full. Test to see if it is working. It should be but no guarantees.
3. If you have a dock, charge it as well. You should be able to use your keyboard and the battery life should be visible.
mine has been fine. Not sure if step 1 is needed. If mine stops working again I'll try to reply here.
chickeneaterguy said:
This worked for me:
1.Make it so your screen is set to "NEVER" turn off. Put max brightness, maybe play a game or something. Let your battery die. (without the dock)
2.Charge your pad without the battery until it's 100% full. Test to see if it is working. It should be but no guarantees.
3. If you have a dock, charge it as well. You should be able to use your keyboard and the battery life should be visible.
mine has been fine. Not sure if step 1 is needed. If mine stops working again I'll try to reply here.
Click to expand...
Click to collapse
I put screen to Never Turn off, max brightness, and played a game until the battery completly died.
I charged my pad with out the keyboard to 100%.
No effect.
I'm charging the keyboard right now.
Battery life has always been visible for me.
Well I finally got ahold of ASUS Support. They are having me RMA both my tablet and keyboard (not sure why the keyboard is being RMA'd since it works fine on my friends tablet) I hope I don't get a bad unit back as my current unit has minimal light bleed (not even noticable outside the boot screen) no creaking and my keyboard is a B60 so no issue with battery drain.
I had this issue but fixed it doing what I said. It hasn't come back for days! Also installed different roms and whatnot.
I just updated to gingerblur v4 today.
My car dock no longer works like it used to. Before I used to just pop my phone into it and it would bring up the stock car dock screen.
Now it no longer does that and also won't auto rotate the home screen!
I tried searching the forums and couldn't find anything!
Is there anyone else having this problem? Is there a fix?
Thanks!
weird I don't have that problem at all on v4
colin8868 said:
I just updated to gingerblur v4 today.
My car dock no longer works like it used to. Before I used to just pop my phone into it and it would bring up the stock car dock screen.
Now it no longer does that and also won't auto rotate the home screen!
I tried searching the forums and couldn't find anything!
Is there anyone else having this problem? Is there a fix?
Thanks!
Click to expand...
Click to collapse
Sounds like a battery pull will help.
Sent from my MB860 using XDA App
Atrix greyblur cardock
Having same priblem. The home screen isnt rotating. I used the gadroot tutorial and restored to 1.2.6 to 5.8. Everything else works fine. I love grey blur otherwise. Phone is rooted no problems other then this. Could anyone help?
Hi all, got my Tab 10.1, in the uk, yesterday, and it seems the homepage digital clock does not seem to change time, or when it does, it does it at random times. Anyone know what is going on?
AllyGraham said:
Hi all, got my Tab 10.1, in the uk, yesterday, and it seems the. homepage digital clock does not seem to change time, or when it does, it does it at random times. Anyone know what is going on?
Click to expand...
Click to collapse
I have the same problem, uk tab 10.1. It might be one of the reasons samsung pulled the touchwiz update for the rest of the world. Sometimes my tab locks up so i cant press anything, i have to press the power button off then on to get functionality back.
A while ago I flashed Wolfbreak's 2.3.3 rom on my X10 and all seemed to work absolutely great. That is until I let the power on my phone run out. When I plugged it in and booted it up all the widgets and shortcuts on my homescreen (LauncherPro) were gone and replaced with 3 default ones. It has happened twice so far and suffice to say that it's a tad annoying. This doesn't seem to happen when I reboot the phone or if I turn it off myself.
Was just wondering if anyone ever experienced something like this and what you did to fix it? The apps in question aren't being saved to the SD card as far as I can tell, so that can't be it. Hope someone is able to help me out
Hello planet earth! I recently broke my galaxy s screen. In order for my pc to connect to the phone is by mounting it through a usb. Without the display i cant mount it. Is there anyway I can go around that situation and collect myfiles through maybe aprogram or software thats out there? I really need help please. thanks!!