I hooked up my TP to my old CRT TV (please don't laugh at me) through a small digital to analog converter. Audio and video come through fine, except the video is "squished" thinner than it should be. The converter and TV don't seem to have options for changing the aspect ratio, so the responsibility falls on my TP. Problem is, I can't find info about changing aspect ratios anywhere. Any ideas? Thanks!
Hanshananigan said:
I hooked up my TP to my old CRT TV (please don't laugh at me) through a small digital to analog converter. Audio and video come through fine, except the video is "squished" thinner than it should be. The converter and TV don't seem to have options for changing the aspect ratio, so the responsibility falls on my TP. Problem is, I can't find info about changing aspect ratios anywhere. Any ideas? Thanks!
Click to expand...
Click to collapse
Get Dice player, it has options for size, rotation and so on, but that is for local videos and I am not sure it will do anything for web video.
Ready2Mosh said:
Get Dice player, it has options for size, rotation and so on, but that is for local videos and I am not sure it will do anything for web video.
Click to expand...
Click to collapse
Thanks Mosh! I'll give it a try.
Ready2Mosh said:
Get Dice player, it has options for size, rotation and so on, but that is for local videos and I am not sure it will do anything for web video.
Click to expand...
Click to collapse
Come to think of it, I mostly run the Netflix app, so yeah, I would need to somehow change the aspect ratio for the HDMI video output (or on the Netflix app, which doesn't seem to have that option).
Anyone else have ideas?
Related
Hey does anybody know how to change the aspect ratio on videos streamed through AllShare? When ever I play a extra widescreen movie, it stretches it out and makes it 16x9. Any way to change this? Thanks.
You can't. Lame, huh? I worked around this by changing the aspect ratio on the TV.
Edit: You guys are talking about the other way round, huh? Phone to TV rather than server to phone. If so, NM, lol.
Does Allshare use the standard Video UI? I was all sorts of frustrated with stretching on 4:3 videos, and then I realized that little square button on the right changes it between stretch, shrink to fit, and original. I haven't messed with Allshare much (our wifi is not very good =/) so I dunno if it uses the regular video player.
I was actually talking about watching on the phone from a server. It appears to use the standard video player but it doesn't have that button to change the aspect ratio. It has a button that looks like it but it is the stop button.
Sent from my SGH-T959 using XDA App
Is there still no aspect ratio adjustment solution for playing movies through Allshare (on the phone)?
So lame that allshare doesn't allow you to change the player in order to get subtitles
I've owned the phone for about a week now and I like it a lot except I'm not sure how to get videos converted on here? I had to find a trial version of AVS video converter which doesn't even support Galaxy S2, I just changed the resolution but it wasn't as good + watermark in the center.
How can I get movies on here and utilize the full screen or at least get good quality? Does Samsung Kies do this?
I know with apple products (i.e. the iPhones, iPods) it easy with itunes and I already have Videora ipod converter which is extremely easy and flawless for my iPod.
I just cant find anything that easy with the Galaxy s2? Honestly it feels like this is the deal breaker for me as much as I love this phone.
You don't have to convert anything. The phone plays divx and mkvs. Converting is in the past. At worst you need to get Dice Player from the market for mkvs with DTS. I have a huge collection and converting is history.
If you want to convert it for downsizing the file size try Handbrake. Free program and open source.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Media Converter looks pretty cool.
CB650 Wolf said:
If you want to convert it for downsizing the file size try Handbrake. Free program and open source.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Click to expand...
Click to collapse
Handbrake is the way to go. Free, open source, and uses one of the best H.264 encoders out there (x264).
I have attached the preset I use for encoding - note that this can probably use some tuning to be more appropriate for the GS2 as it's more capable than the Android devices I've encoded to before for media playback. It'll work just fine on the GS2, it just won't achieve quite the quality and compression ratios possible by enabling some of the more advanced H.264 features.
I disagree on conversion being unnecessary - 720p/1080p videos are pointless unless you're using the MHL adapter, they'll play but are a waste of storage space. Also, some codecs/formats may fallback on software decoding, eating your battery more than hardware-decoded formats.
poofyhairguy said:
You don't have to convert anything. The phone plays divx and mkvs. Converting is in the past. At worst you need to get Dice Player from the market for mkvs with DTS. I have a huge collection and converting is history.
Click to expand...
Click to collapse
and here I was searching the ends of the earth looking for a program to convert the files. I could have sworn I saw somewhere that Galaxy S2 didn't support avi's. Boy was I wrong. Thanks!
DivX or XviD are just codecs for .avi files right? Most of my movies are all avi's and I just drag and dropped one and it played great just now.
Do you all your movies play with black borders too? I know I could resize it on my Galaxy S2 but there is some loss in quality. This seems like a universal thing as my iPod Touch does the same thing. It's not a problem really it's just I'd like to be able to utilize the full screen.
Entropy512 said:
Handbrake is the way to go. Free, open source, and uses one of the best H.264 encoders out there (x264).
I have attached the preset I use for encoding - note that this can probably use some tuning to be more appropriate for the GS2 as it's more capable than the Android devices I've encoded to before for media playback. It'll work just fine on the GS2, it just won't achieve quite the quality and compression ratios possible by enabling some of the more advanced H.264 features.
I disagree on conversion being unnecessary - 720p/1080p videos are pointless unless you're using the MHL adapter, they'll play but are a waste of storage space. Also, some codecs/formats may fallback on software decoding, eating your battery more than hardware-decoded formats.
Click to expand...
Click to collapse
I've heard of Handbrake, basically it's if I have full DVD's right? And you can't see true 720p or 1080p videos on this phone right? Only on a hdtv through the MHL adapter?
just-another said:
Do you all your movies play with black borders too? I know I could resize it on my Galaxy S2 but there is some loss in quality. This seems like a universal thing as my iPod Touch does the same thing. It's not a problem really it's just I'd like to be able to utilize the full screen.
Click to expand...
Click to collapse
Yes, it does for movies but not TV thanks to the aspect ratio. Some player from the market (Moboplayer, Dice Player) let you resize to fill the screen.
I've heard of Handbrake, basically it's if I have full DVD's right? And you can't see true 720p or 1080p videos on this phone right? Only on a hdtv through the MHL adapter?
Click to expand...
Click to collapse
Handbrake can re-encode almost any video source. You can watch 1080p movies on the phone but they only display in WVGA resolution. With MHL out the phone will playback full Blu Ray rips in 1080p (I do this often).
Depends on the movie. If it's a 16:9 movie, it should have little to no black bordering.
If it's a 2.35:1 movie - it's going to have black bars above/below.
4:3 content will have black bars left/right.
While you can directly watch 1080p content (we've got a beefy GPU), it gets scaled down to 480p - so it'll just waste storage space.
The preset I linked preserves the aspect ratio and limits to a max of 800 pixels wide or 480 tall, so basically scaling video to the optimal resolution for our phone - not too small, not any larger than the native resolution.
If you want to use the MHL adapter, I can post the 720p preset I use on my Tab 10.1
Entropy512 said:
Handbrake is the way to go. Free, open source, and uses one of the best H.264 encoders out there (x264).
I have attached the preset I use for encoding - note that this can probably use some tuning to be more appropriate for the GS2 as it's more capable than the Android devices I've encoded to before for media playback. It'll work just fine on the GS2, it just won't achieve quite the quality and compression ratios possible by enabling some of the more advanced H.264 features.
I disagree on conversion being unnecessary - 720p/1080p videos are pointless unless you're using the MHL adapter, they'll play but are a waste of storage space. Also, some codecs/formats may fallback on software decoding, eating your battery more than hardware-decoded formats.
Click to expand...
Click to collapse
Thanks a lot for attaching your preset. It works great. You mentioned that it can use some tuning for our phone to achieve the quality and compression ratios possible. I don't know how to do that so I don't know if it's quick and simple to do or not. Can you do that and attach it for us to download?
Thanks
Basically go into Advanced and try enabling various features until something breaks.
I tried it on my Infuse at one point and it just caused audio and video to desync. Haven't had time to fiddle with it on the GS2. It's basically trial and error in the Advanced tab of Handbrake.
Entropy512 said:
Basically go into Advanced and try enabling various features until something breaks.
I tried it on my Infuse at one point and it just caused audio and video to desync. Haven't had time to fiddle with it on the GS2. It's basically trial and error in the Advanced tab of Handbrake.
Click to expand...
Click to collapse
ok. thanks
can you post the preset you use for your tab 10.1?
thanks again
It's basically the exact same preset except the resolution limits are 1280x720. The resolution limits are hard to find, you only see them when saving a profile.
Is anyone else having part of their android screen cut off (just the two side edges) when they are plugged into the hdmi port on TVs? Any idea how or if you can fix that?
Depends on the resolution of your TV and the picture mode/scaling you have set.
TF201 / XDA premium
I want to be able to turn my screen off while watching a movie, is that possible? I have watched 2 movies so far and the screen stays on the whole time while I watch the movies, I feel that this drains the battery more this way. Is there a way to turn off the screen while watching a movie?
I have not yet found a way to do so
What player did you use? I watched a 720p mkv using BSPlayer Lite and I think at some point the screen timed out and the video kept going on the TV.
TalynOne said:
What player did you use? I watched a 720p mkv using BSPlayer Lite and I think at some point the screen timed out and the video kept going on the TV.
Click to expand...
Click to collapse
I tried modoplayer and mx player
i used mxplayer and my screen turned off but i was using hw not sw mode
A lot of TVs have "overscan" enabled by default, which cuts off the outer edge of the screen and stretches the image. It's a carryover from the SDTV days, since CRT TVs wouldn't display all the way to the edge and TV shows and video games were designed with this in mind. That might be the issue. There's usually a setting in the TV's menu to disable overscan.
When using Gallery to play video to HDMI, my screen actually does go off for 1080p videos (no mirror function due to the high res).
I still can't get more than left channel audio when playing an H.264 stereo AAC MPEG4 video out to my 2 HD TVs. My several other tablets and phones don't have this issue. I've tried with 2 HDMI 1.4 cables that work for the other devices.
If I play a video with 5.1 channel audio and run it through my AV receiver, the receiver detects the 5.1 input, but I get only left front channel out and sub. I'm still not sure if this is a defective Prime or a buggy implementation of 5.1 on the tablet.
Is anyone getting both left and right channel audio when plugging the Prime into an HD TV?
i'm actually not being able to see anything on my tv, am i doing or missing something wrong?
I've got both side speakers working on my TV. I have a samsung sound bar hooked up to my tv and it sounded awesome last night while watching my movie.
Cuyabro, the only thing I did was plugged the HDMI cable to my TV and TP and it worked. I didn't do anything special.
Tried rebooting the tablet and unplugging-replugging the cable, cuyabro?
Ok, firstly, i used the search, found this thread, didnt help.
http://forum.xda-developers.com/showthread.php?t=1427587
I know the prime can read pretty much any video file given the right player, thats not my question.
My problem is most of my bluerays have been converted to digital, in some cases the files are over 10 gigs. Now i CAN play those files on my prime however i can only fit a couple on my sd card before i run out of space.
What im looking for is settings to optimize conversion for best quality the prime can show while reducing the file size to the smallest possible.
For instance, a 1080P video will play at a max resolution of 1280 x 800. Audio can be stripped to stereo instead of 5.1 surround since the prime wont output much better anyways.
Most of my files are MKV format.
WinFF is my software of choice, its worked well for me in the past but there were specific config files for it. Unfortunately i dont know enough about video encoding to know which settings to use for the prime.
Anyone have experience with WinFF? Have other software you use that works better? If anyone has suggestions im open to them. Thanks!
If I remember right, AVS vide converter has that option but it's not free. I'm sure there are free alternatives but I can't name any
Sent from my sgs2 running cm9
edited first post. WinFF is my software of choice but im not sure what settings to use other than 1050x800 for the resolution. What bit rates should i use, what presets? any ideas?
I wouldn't use x800.
Down-convert to 720p and stick to the Scene rules (attached) and you'll be good.
Edit: looks like the .png attach gets resized to useless. Grab the .c file and rename to .png.
I stick to CD size 700Mb downloads and they seem to work fine whatever the resolution.
I use handbrake (free) to convert my movies. If the movie is 1080p scale it down to 720p. i use the profile from here http://forum.xda-developers.com/showthread.php?t=1060825
movies end up being like 2 gb tops and play great. they will even stream with the average wifi signal on the prime.
I do my conversions with RipBot264.
For the Prime, I convert:
Video down to 720p mkv with quality set to High-Profile CQ19 or CQ20. No sense in 1080p unless I'm watching on 40"+ big screen that can show the extra resolution.
I set audio to DD/DTS "5.1 core only" because I use the same files with my laptop (Lenovo X220) which can output 5.1 via HDMI or optical equipped USB sound card ($25 SIIG soundwave in my case). I can understand why some would go down to stereo, but audio data is small compared to video data.., so there's not that much of a size penalty for keeping 5.1 audio since I might actually use it.
Main reason I use RipBot is to deal with movies that have forced subtitles. I can identify the forced subtitle track and have it build/render the subtitles into the video frames. This is so I don't have to deal with whether my device/player supports subtitles correctly. Watching something like District 9 (heavily subtitled) would be a disaster, otherwise.
Size wise, I usually see around an 80-85% reduction in size vs the original source m2ts file.
But this is what I love about the TF201. If I'm in a rush to make a flight, I don't have to convert. It will play the same 1080p CQ18 mkv I use on my XBMC / NAS setup. Heck, it'll even play the raw Bluray m2ts file straight off the disc. Love my TF201.
Ya, as stated in OP PLAYING the videos is never a problem, its just storing more than a couple of those extra high res videos takes a toll on my onboard memory
Thanks for the tips all around, will definately give them a go.
Just use ttorrent. Problem solved.
Sent from my Samsung iDroid
dnar56 said:
Just use ttorrent. Problem solved.
Sent from my Samsung iDroid
Click to expand...
Click to collapse
Not quite. Not all movies make it to a torrent. Hand brake as was previously posted is what I've been using for a while and it works great. SUPER works and has presets for quite a few screen types and sound codecs.
Sent from my ADR6425LVW using xda premium
gunz.jones said:
Not quite. Not all movies make it to a torrent. Hand brake as was previously posted is what I've been using for a while and it works great. SUPER works and has presets for quite a few screen types and sound codecs.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
what presets are you using? how do the movies turn out? what file size would an average length movie turn out to?
Hello, first time posting.
Problem: when I attach my xperia P to my TV (Vistron 32in DB32) via the Sony included HDMI cable the picture quality for movies or streaming is terrible. In fact it is Windows 95 terrible.
When the phone is attached via the HDMI cable the TV resolution defaults to 720 HD, it is capable of full HD.
I spent along time reading this forum and established that my TV is not CEC HDMI capable, so I cannot use my remote to navigate. Also, I found the Service Menu thanks to this site. I found the TV Out settings and.changed them to 1080p, selected SET but the settings would not hold. Everytime I navigated away from the settings they reverted back to 720i. On a separate note, I noticed HDCP was enabled when the phone was attached.
That is as far as I have got. Can anyone else help? I did buy the phone as it had an HDMI port, but I cannot use it. I just want the P to display movies, streaming movies with some basic quality.
How you gonna get 1080p on a panel that has only 1366x768 pixels that is what I want to know.
ChikeD said:
How you gonna get 1080p on a panel that has only 1366x768 pixels that is what I want to know.
Click to expand...
Click to collapse
I see! Surely the picture should be watchable at 720?
onebody said:
I see! Surely the picture should be watchable at 720?
Click to expand...
Click to collapse
With my poor sight probably LOL
I'll try on my Dell screen see whats the difference.
I have no way telling what resolution I'm at but display settings report optimal resolution 1920x1200.
Wasn't impressed with YT HQ videos but a 720p file I played looked good even if not as when played on PC.
pc3refarfrom
ChikeD said:
I have no way telling what resolution I'm at but display settings report optimal resolution 1920x1200.
Wasn't impressed with YT HQ videos but a 720p file I played looked good even if not as when played on PC.
Click to expand...
Click to collapse
Hi, thanks for helping. I will try and download a 720i file ans playback and see how it goes. /B