Hey everyone,
So, I flashed my phone using the flash GUI app with a boot.img, and went on in the recovery and flashed a compatible rom. When I rebooted, it goes to the screen that says "***UNLOCKED***".
Thinking I must have flashed the rom incorrectly, I went into recovery twice and flashed a rom twice. It's actually quite weird, this has never happened to me before, usually it boots at least and gets stuck in a boot loop, but this is not the case.
Any ideas how to at least boot?
boot into fastboot and reflash the kernel using adb
amad99 said:
Hey everyone,
So, I flashed my phone using the flash GUI app with a boot.img, and went on in the recovery and flashed a compatible rom. When I rebooted, it goes to the screen that says "***UNLOCKED***".
Thinking I must have flashed the rom incorrectly, I went into recovery twice and flashed a rom twice. It's actually quite weird, this has never happened to me before, usually it boots at least and gets stuck in a boot loop, but this is not the case.
Any ideas how to at least boot?
Click to expand...
Click to collapse
Pull battery, then boot into bootloader by holding down volume down + power button. Select fastboot. Next connext phone to computer via usb cable. On the computer extract the kernel zip, open the folder, and open flash.bat. this will flash the kernel and fix your problem, IF if is a kernel problem...
Wat rom and what kernel did u try flashing?
Sent from my NRGized Amaze...
via xda premium
Related
So I was walking my girlfriend through rooting her new Evo3D, and we couldn't get the phone to get past the 'MI' logo, so I figured it was a kernel thing. After four kernels and two versions of MIUI I realized that it wasn't the issue, it was the hboot.
She didn't back up, she has only had it since last night. I now know what I need to do to flash the ROM, but how can I get her back to stock so I can get the app needed?
Any help?
She has HBOOT 1.5, right?
Go back to the folder where you did all the rooting. Get the stock MIUI kernel (boot.img from the flashable zip) and place it in that folder. Open up a cmd and navigate to that folder.
Boot her phone into fastboot mode. (Vol down + power while the phone is off. Hit power button to select fastboot once it goes into bootloader) Plug the phone into the computer via USB
Type 'fastboot flash boot boot.img' in the kernel. If it successfully flashes, you are done! MIUI should boot up now that it has the appropriate kernel. You will need to do this for any ROM you flash.
As long as you have a recovery, just flash whatever rom you want through fastboot and the kernel will stick.
Or just download a stock rooted rom and flash that the same way you just tried to flash MIUI. It will work since you still have the original kernel.
Sent from my PG86100 using XDA App
flonker said:
As long as you have a recovery, just flash whatever rom you want through fastboot and the kernel will stick.
Or just download a stock rooted rom and flash that the same way you just tried to flash MIUI. It will work since you still have the original kernel.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Well, ROM's cant be flashed through fastboot. The ROM is flashed through recovery. Then you go to fastboot and flash the kernel with my guide above. After that, everything should be working fine.
yousefak said:
She has HBOOT 1.5, right?
Go back to the folder where you did all the rooting. Get the stock MIUI kernel (boot.img from the flashable zip) and place it in that folder. Open up a cmd and navigate to that folder.
Boot her phone into fastboot mode. (Vol down + power while the phone is off. Hit power button to select fastboot once it goes into bootloader) Plug the phone into the computer via USB
Type 'fastboot flash boot boot.img' in the kernel. If it successfully flashes, you are done! MIUI should boot up now that it has the appropriate kernel. You will need to do this for any ROM you flash.
Click to expand...
Click to collapse
Hopefully this works! Shes at church right now but I will have her do this ASAP and I'll report back!
(Awesome response time BTW)
Roms are flashed through fastboot just by loading your recovery into fastboot.
I never flash roms and kernels separately. Just go into fastboot, load your recovery, and flash as you normally would.
Sent from my PG86100 using XDA App
I had something similar when flashing MIUI. if you boot the recovery.img from fastboot it should work. you may want to re download just in case of a bad download.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
I'm having the same problem as epicchase. have attempted to flash miui many times. at first i tried to do it through my recovery. it didn't work. then i tried to use the fast boot method and flash it from the recovery that i opened from fast boot. i'm quite frustrated. it just wont boot miui, is it the kernel, i'm new to rooting in general but i think i know what i'm doing. i have spent who knows how many hours trying everything i can. i tried flashing the boot.img and the ROM separately. I have successively flashed android revolution hd, but that's no fun, its nearly the same as the stock ROM any suggestions would be appreciated. it boots but i guess it must be a boot loop but idk all i know is it freezes in the middle of the boot animation.
ps. i am rooted using the htc official method (unfortunately) and am s-on)
redstrike120 said:
I'm having the same problem as epicchase. have attempted to flash miui many times. at first i tried to do it through my recovery. it didn't work. then i tried to use the fast boot method and flash it from the recovery that i opened from fast boot. i'm quite frustrated. it just wont boot miui, is it the kernel, i'm new to rooting in general but i think i know what i'm doing. i have spent who knows how many hours trying everything i can. i tried flashing the boot.img and the ROM separately. I have successively flashed android revolution hd, but that's no fun, its nearly the same as the stock ROM any suggestions would be appreciated. it boots but i guess it must be a boot loop but idk all i know is it freezes in the middle of the boot animation.
ps. i am rooted using the htc official method (unfortunately) and am s-on)
Click to expand...
Click to collapse
Did you do a full wipe before you flashed? Find Virus's Superwipe tool (.zip), boot to recovery with fastboot, flash the superwipe.zip, then flash MIUI.
Twolazyg said:
Did you do a full wipe before you flashed? Find Virus's Superwipe tool (.zip), boot to recovery with fastboot, flash the superwipe.zip, then flash MIUI.
Click to expand...
Click to collapse
I will try that tonight thanks very much in advance
Sent from my PG86100 using XDA App
Twolazyg said:
Did you do a full wipe before you flashed? Find Virus's Superwipe tool (.zip), boot to recovery with fastboot, flash the superwipe.zip, then flash MIUI.
Click to expand...
Click to collapse
well it didn't work it did the same exact thing. I've been giving it about 10 mins to attempt to boot is that long enough? I'm new to non sense roms I've only ever used sense, is there something I'm forgetting to do that is different for non sense roms. *frustration* (and i thought i was beginning to understand this)
---------- Post added at 09:43 PM ---------- Previous post was at 08:46 PM ----------
okay well i tried to flash cyanogenmod 7 still no dice. I must be an idiot, sorry for being a noob.
this is what im doing.
im placing the .zip on root of my sd card. then opening my cmd.
i then type " cd c:\android" (i saved the recovery image in a folder named android) it says
"c:\android" just as it should i then type "fastboot boot recovery.img"
it restarts my phone in recovery
i press install .zip from sd card then click wipe cache and dalvik cache it goes and does its work
i then select the superwipe.zip it says flash compete however it says error or something but i just kind of ignored it.
i then select my miui.zip that i got from www.miui.us
i then select install .zip files the first thing that comes up is "md5 check fail- ignoring" and the continues and flashes (i have no clue what that part means but i continue anyway)
i select reboot and it starts to boot my phone i get the white screen with green htc.
i then get the miui boot animation for anywhere from 2-5 seconds and then it freezes.
i sit and nearly just stare at it and the clock. i wait at least 5 mins but have waited up to 30 mins.
the boot animation never restarts i just freezes there making me think it is not a boot loop (however the definition of an actual bootloop is slightly vague to me.)
anyway thanks for reading and if you have any suggestions i will be very happy for now im just gonna run my android revolution hd rom.
If superwipe isn't working, fastboot to recovery, go to the wipe menu, not install a zip, wipe dalvik, cache, and factory reset. Don't do the factory reset in android, do it in recovery. I'm guessing you got a corrupt download of superwipe, I would redownload it and try it again if I were you.
Try using this one.
Twolazyg said:
If superwipe isn't working, fastboot to recovery, go to the wipe menu, not install a zip, wipe dalvik, cache, and factory reset. Don't do the factory reset in android, do it in recovery. I'm guessing you got a corrupt download of superwipe, I would redownload it and try it again if I were you.
Try using this one.
Click to expand...
Click to collapse
Yayyyy perfect thankyou sooooo much I'm speechless thank you so much!!! it flashed like it was mardi gras.
Sent from my HTC EVO 3D using XDA App
this process doesnt work for me, i have been trying it for 2 mnoths..No avail, is there anyone who can make this work?
EVO 3D HBOOT 1.5
rcquartz said:
this process doesnt work for me, i have been trying it for 2 mnoths..No avail, is there anyone who can make this work?
EVO 3D HBOOT 1.5
Click to expand...
Click to collapse
What didn't work for you?
rcquartz said:
this process doesnt work for me, i have been trying it for 2 mnoths..No avail, is there anyone who can make this work?
EVO 3D HBOOT 1.5
Click to expand...
Click to collapse
make sure your phone is actually rooted if it is hboot 1.5 make sure to use htvdev.com
make sure you have a recovery image
My phone's battery was low so i tried to boot it a couple of times including a recovery boot (hold buttons down), but since that i kees booting into recovery. the samsung screen loads, then re-flashes and boots into recovery. i tried to delete cache/reset/even complete SD card install but to no avail.. please help!
30secs said:
My phone's battery was low so i tried to boot it a couple of times including a recovery boot (hold buttons down), but since that i kees booting into recovery. the samsung screen loads, then re-flashes and boots into recovery. i tried to delete cache/reset/even complete SD card install but to no avail.. please help!
Click to expand...
Click to collapse
What Rom are you running? It sounds like you are stuck in a boot loop.
Sent from my SCH-I500 using xda app-developers app
scarfman4 said:
What Rom are you running? It sounds like you are stuck in a boot loop.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
AOKP. I am stuck in a boot loop.. tried installing other ROMs but keep getting back in the boot loop into recovery.
I need some help ASAP!
Try pulling the battery for 10 minutes then make sure it's fully charged then go into recovery. and flash rom again
you might have to use odin and flash your phone back to stock.
None of my attempts to recover worked.. so i decided to ODIN to stock and back to AOKP. So far so good.. AOKP stock loaded, now i'm going to try and do a backup restore.
One thing i missed though --- i didn't install the atlas file with the stock ROM.. does it matter? what does it do anyway?
The reason you bootlooped was because you 3 fingered to recovery on an ics rom, which is a big no-no. Always boot to recovery via power menu. You should have re-partitioned using the pit file, but if everything works I wouldn't sweat it. If you start to get fc's then you know where you went wrong.
Sent from my SCH-I500 using xda premium
mezster said:
The reason you bootlooped was because you 3 fingered to recovery on an ics rom, which is a big no-no. Always boot to recovery via power menu. You should have re-partitioned using the pit file, but if everything works I wouldn't sweat it. If you start to get fc's then you know where you went wrong.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
You're right.. that i did. My phone was blank and the power button just wouldn't boot the phone so i resulted to the force-recovery. Everything seems to be working, and i'm going to flash to milestone 6 while i'm at it. Anything i should watch out for other that FC's? i've actually read while doing research that Atlas may actually cause instabilities..
GT-s6500D
Hello i was in CWM recovery advanced menu when i accidentaly pressed reboot recovery option.
Now the phone always boots in recovery. Help please. i have downloaded stock ROM, but lost USB cable. I placed ROM in sd using adapter and tried to install it but it didn't work.
CastroBoy1975 said:
Hello i was in CWM recovery advanced menu when i accidentaly pressed reboot recovery option.
Now the phone always boots in recovery. Help please. i have downloaded stock ROM, but lost USB cable. I placed ROM in sd using adapter and tried to install it but it didn't work.
Click to expand...
Click to collapse
1yr old thread dude just flash stock ROM in Odin and get another USB cable wait how do you charge IMO
Sent from my SCH-I500 using Tapatalk 2
Thanks
bbrad said:
1yr old thread dude just flash stock ROM in Odin and get another USB cable wait how do you charge IMO
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. Can you please tell me how to flash ROM using Odin please.
P.S.This was the only place to come to.
Ok everything is fine now.
Thanks for help.
hi, I have SGS-II I 9100. I was using root box 4 rom on my SGS-II with default kernel. All of a sudden day before yesterday the baseband and IMEI just vanished. Flashing the OEM rom seemed as solution. So I flashed the Android 4.1.2 India rom. It did flashed it successfully. The phone restarts and shows android logo and does something. When it restarts again it goes directly into recovery. I have tried with different versions but its still the same. Tried to flash Siyah kernel and Install custom rom. It still does that goes directly into CWM recovery screen. Can anyone help with this issue. I am clueless on how to fix it. Forgot to mention it does not reboot automatically. When clicked on reboot it shuts down. I then need to pull out the battery and get it back into it and then start the phone.
dimitrix730 said:
hi, I have SGS-II I 9100. I was using root box 4 rom on my SGS-II with default kernel. All of a sudden day before yesterday the baseband and IMEI just vanished. Flashing the OEM rom seemed as solution. So I flashed the Android 4.1.2 India rom. It did flashed it successfully. The phone restarts and shows android logo and does something. When it restarts again it goes directly into recovery. I have tried with different versions but its still the same. Tried to flash Siyah kernel and Install custom rom. It still does that goes directly into CWM recovery screen. Can anyone help with this issue. I am clueless on how to fix it. Forgot to mention it does not reboot automatically. When clicked on reboot it shuts down. I then need to pull out the battery and get it back into it and then start the phone.
Click to expand...
Click to collapse
Flash stock firmware again via Odin when you phone booting after flashing press volume up+home +power button for 10sec it's give you stock recovery then select wipe data factory reset then reboot your Device it will successfully boot
Sent from my GT-I9100 using xda premium
gauravgymnast08 said:
Flash stock firmware again via Odin when you phone booting after flashing press volume up+home +power button for 10sec it's give you stock recovery then select wipe data factory reset then reboot your Device it will successfully boot
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I did it twice. flashing 4.1.2 roms from different regions.did try factory reset. that too doesnt work. Still stuck at recovery screen. it just wont step out of it.
You flashed stock with odin and it go's to cwm? What did you flash? Were did you get it from?
andrewwright said:
You flashed stock with odin and it go's to cwm? What did you flash? Were did you get it from?
Click to expand...
Click to collapse
Thank-you for your reply. I flashed Stock i9100 from Sam firmwares. Gave a try to India, UK and italy edition. It does not go to CWM but rather goes into android recovery wizard. The screen where you see red triangle with android died or something. Its been more than a day and still cant find how to fix it. After flashing the stock firmware when i reboot my phone I get to a screen with android and status bar right at the bottom of it. Probably installs boot loader or something it the second screen once you reboot your phone after flashing the stock firmware. The next time you reboot you should be getting to OS right? But it takes me to recovery instead? What does it expect me to do in the recovery screen? I really don't know. I can access only 2 modes Download and recovery.
Here's the thing..3e recovery is the samsung default recovery mode whereas CWM is a customized one.
You either flash it via Odin or you flash a custom kernel via odin to get it.
Anyway, as long as you are NOT on 4.0.4 you can factory reset and wipe cache via stock recovery (3e).
Again, what did you flash exactly?
Sent from...this is not even my S2
Hi at all
I've flashed the elite kernel coming from the latest hxore kernel and elegancia rom without whiping (i never did a whipe for a kernel change before).
right now i got the problem that i can't get into the recovery (twrp 2.6). my phone keeps rebooting. now i can't do a restore because i'm stuck in the bootloader. any tipps or ideas?
thanks guys!
Fast boot then flash stock ROMs. You'll have to start all over but tour phone will be operational.
If phone keeps rebooting hold down power button till it turns completely off. Take awhile. Also charge phone before flashing in fast boot.
fire6water said:
Fast boot then flash stock ROMs. You'll have to start all over but tour phone will be operational.
If phone keeps rebooting hold down power button till it turns completely off. Take awhile. Also charge phone before flashing in fast boot.
Click to expand...
Click to collapse
thanks mate! how can i get the stock rom? i got a ruu on my computer, but is it the same or do i need a stock zip?
cheers
Did you flash the kernel to boot partition and not recovery? Are you using the right recovery for your device? (International or AT&T)
Sent from my HTC One X+ using Tapatalk 4 Beta
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
iPusak Gaoq™ said:
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
Click to expand...
Click to collapse
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
jan019 said:
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
Click to expand...
Click to collapse
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
iPusak Gaoq™ said:
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
Click to expand...
Click to collapse
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
jan019 said:
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
Click to expand...
Click to collapse
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
iPusak Gaoq™ said:
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
Click to expand...
Click to collapse
Okay, I'll give it a shot and come back with how I did.
jan019 said:
Okay, I'll give it a shot and come back with how I did.
Click to expand...
Click to collapse
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
jan019 said:
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
Click to expand...
Click to collapse
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
jan019 said:
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
Click to expand...
Click to collapse
Hmmmm...how many times did i have to tell you, you need to FLASH STOCK ROM first...stock rom has stock kernel inside it...flashing STOCK rom will factory reset your phone...it should make your phone like new...after your phone boot normally then you can flash custom kernel (fxp kernel) and boot into recovery using that kernel...then only then you can flash CM10 into your phone....
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
bejunk said:
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
Click to expand...
Click to collapse
Okay guys, I'm really confused right now. I just couldn't manage to boot into CWM with CM, I tried many versions, none worked. I then applied the exact same steps onto LX and it worked perfectly, I was in CWM after pressing the volume down butto na few times. Now it's been almost a month since I did this and I wanted to change to a differet version again, so I wanted to try CM again, but it's the same thing, I can't get to CWM. Any ideas?
Thanks