[Q] Restore stock recovery? - Asus Eee Pad Transformer Prime

So I been trying to unlock bootloader but give me this error "An unknown error occurs, which maybe network connection issue please try again later" each time I try to unlock. already logged in acc on atp no login pop up from unlock tool.
I installed cwm but I can't do anything in recovery mode since bootloader is locked is there any way to restore recovery without bootloader unlocked
been trying unlock app every 1hr or so past 2 days but still gives the error still
any help would be appreciated

Uhh... You can't have ClockworkMod recovery unless you're already unlocked. ..
Sent from my ADR6425LVW using XDA Premium.

Yeah I Know I just get an image of android with red triangle caution sign when boot to recovery that why I want to restore stock title of thread.
installed cwm via rom manger buy mistake when first loaded app now all get is an image described above then resets

k9chan said:
Yeah I Know I just get an image of android with red triangle caution sign when boot to recovery that why I want to restore stock title of thread.
installed cwm via rom manger buy mistake when first loaded app now all get is an image described above then resets
Click to expand...
Click to collapse
As already stated you can't install CWM without beein unlocked. You still have the stock recovery. No need to do anything.

oh so when I power on atp with vol down + power button then press up it should then give me an image of andriod lying down open chest with a red triangle with ! in it?
Just trying to make sure

k9chan said:
oh so when I power on atp with vol down + power button then press up it should then give me an image of andriod lying down open chest with a red triangle with ! in it?
Just trying to make sure
Click to expand...
Click to collapse
Correct.
Sent from my ADR6425LVW using XDA Premium.

SteveG12543 said:
Correct.
Sent from my ADR6425LVW using XDA Premium.
Click to expand...
Click to collapse
thanks for the update
but have to rma again just had it back for 2 days new screen even more screen bleed and no OTA update had to do manually + cannot unlock bootloader(know void warranty)
guess world wants me to rma again since cannot unlock bootloader lol

Related

[Q] Need some help. Yes i'm a noob. But i've been doing homework

Atrix 2.3.4 - 4.5.91
First off, I've done like 10 hours of researching today so please bare with me.
I thought I had unlocked my bootloader and rooted my phone in the past. I'm able to tether so that was a sign I did it.
Today I attempted to install romracer cwm based recovery with rom manager. When i tried to install Rom from the sd. it restarted and said "failed to boot 2" after doing some research it said it was possible my bootloader was not unlocked. Now I think i did the right steps back when.
How do I find out for sure if my boot loader is unlocked.
I'm doing all this because Im attempting to get my phone back to stock as can be. I want to get it back to warranty for the following reasons
1) my video play back is all messed up on my recorder. (will a sbf fix this)?
2) when i insert a external sd card to my atrix, my screen sometimes turns black when it wants to).
So this is where i'm stuck. I read the newbie threads. Thanks for all the info. But man this "failed to boot 2" scared me. Luckily it didn't brick my phone. Took out battery and it started back up.
Help please
If your unlocked it will say unlocked in red letters at top of screen when turned on. If you aren't unlocked its possible you have just rooted your phone I think not positive that a factory reset would unroot your phone. Just go into recovery hold volume down when turning it on cycle down with volume down and choose with volume up in recovery both volume rockers are used to navigate and power is choose.
Sent from my MB860 using XDA App
freshbakd'
.tried what you told me. Got a android guy and “!” next to him. My phone doesn't say unlocked. I took out battery to restart it cause it froze with android guy. Any more info
So i did a factory reset. I guess there was more steps i need to take when I saw the android logo and "!". is my phone unrooted thanks for anyone who can help. As mentioned before. I don't think my phone was ever unlocked because I didn't see it when I started up my phone.
lambdaman4 said:
freshbakd'
.tried what you told me. Got a android guy and “!” next to him. My phone doesn't say unlocked. I took out battery to restart it cause it froze with android guy. Any more info
Click to expand...
Click to collapse
Use pudding thread to unlock your bootloader, install Rom Racers CWM via fastboot after you are unlocked. If you want to make sure you are rooted after that, use the Moto root, stuck at top of the General section.
Sent from my MB860 using xda premium
Actually man if yer trying to get back to stock for warranty stuff or whatever just flash the 2.3.4 sbf. And be done with it.
Sent from my MB860 using Tapatalk
Phalanx7621 said:
Actually man if yer trying to get back to stock for warranty stuff or whatever just flash the 2.3.4 sbf. And be done with it.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
i doubt I can flash without being bootloader being unlocked. I did a hard reset. wiped everything out. So thats why I was asking if that unrooted my phone.
lambdaman4 said:
i doubt I can flash without being bootloader being unlocked. I did a hard reset. wiped everything out. So thats why I was asking if that unrooted my phone.
Click to expand...
Click to collapse
You can flash to stock if your bootloader is locked. I did it and worked like a charm.
Sent from my MB300 using XDA App
pre4speed said:
You can flash to stock if your bootloader is locked. I did it and worked like a charm.
Sent from my MB300 using XDA App
Click to expand...
Click to collapse
+10 char. This. .sbf are flashed with rsd on your computer. Not with the phones recovery. That's why I mentioned this option for ya.
Sent from my MB860 using Tapatalk
O yeah forgot haven't used that in awhile when u get to the Droid with the I push in volume up and down at same then it enters stock recovery
Sent from my MB860 using XDA App

Photon Recovery missing??!!

Came from MIUI v4 and did a factory reset, then flashed 154_5, then 198_7 and OCR-root successfully. Then failed to get unlocked!
Realized I don't have Android Recovery anymore, just a yellow triangle when Vol-Dn+Pwr and selecting Recovery. Does stock recovery get re-installed when going back to stock with 154_5 sbf?
I've done this whole procedure a few times but am by no means an expert. How can I get stock recovery back functional?
THANKS for any help!!
its vol dn and vol up. no need to press power btn
Sent from my MB855 using xda app-developers app
Doballa said:
its vol dn and vol up. no need to press power btn
Click to expand...
Click to collapse
Not sure I understand.
Does anyone know how to get recovery back to be functional?
HackGerm said:
Not sure I understand.
Does anyone know how to get recovery back to be functional?
Click to expand...
Click to collapse
Once on the screen with the yellow triangle push vol up and down for options.
mof9336 said:
Once on the screen with the yellow triangle push vol up and down for options.
Click to expand...
Click to collapse
Ok, sorry. I have done that. Used that small menu to wipe system and cache. That allowed me to reboot the phone. However, I still don't have stock recovery. Unless that is stock recovery and only a custom recovery provides more options. Strange that it would give the error message though ....
Do you know?
HackGerm said:
Ok, sorry. I have done that. Used that small menu to wipe system and cache. That allowed me to reboot the phone. However, I still don't have stock recovery. Unless that is stock recovery and only a custom recovery provides more options. Strange that it would give the error message though ....
Do you know?
Click to expand...
Click to collapse
That is the stock recovery.
mof9336 said:
That is the stock recovery.
Click to expand...
Click to collapse
Thanks!
And I thought it something to do with me not getting root. I went back from MIUI v4 by factory reset, 154_5, 198_7, rooted successfully with OCR, flashed derpunlock.sbf, but moto-fastboot oem unlock just returned <searching device>.
Flashed derpunlock.sbf again, checked drivers, no success.
Do you know what it could be. I'm ready to start over!
HackGerm said:
Thanks!
And I thought it something to do with me not getting root. I went back from MIUI v4 by factory reset, 154_5, 198_7, rooted successfully with OCR, flashed derpunlock.sbf, but moto-fastboot oem unlock just returned <searching device>.
Flashed derpunlock.sbf again, checked drivers, no success.
Do you know what it could be. I'm ready to start over!
Click to expand...
Click to collapse
no need to OEM unlock again. you only need to OEM unlock once after that just flash deprunlock and youll be unlocked.
mof9336 said:
no need to OEM unlock again. you only need to OEM unlock once after that just flash deprunlock and youll be unlocked.
Click to expand...
Click to collapse
Cool, didn't realize that. I thought factory reset and flashing 154_4 fully returns the phone to stock. So I take it from here I can just move on with installing CWM and then flashing MIUI and other Roms, right?!
HackGerm said:
Cool, didn't realize that. I thought factory reset and flashing 154_4 fully returns the phone to stock. So I take it from here I can just move on with installing CWM and then flashing MIUI and other Roms, right?!
Click to expand...
Click to collapse
Yes as long as when you power on your phone on the m logo screen it should say unlocked right?
Sent from my MB855 using xda app-developers app
mof9336 said:
Yes as long as when you power on your phone on the m logo screen it should say unlocked right?
Click to expand...
Click to collapse
It sure does! You have been most helpful, thank you!
In the meantime I successfully installed Jokersax's recovery, tomorrow I'll install MIUI 2.7.6. I AM STOKED!! :highfive:
Glad it worked out
Sent from my MB855 using xda app-developers app

Cant get to recovery mode

Hello,
I just unlocked my prime after realising that stock .28 firmware is doing so much of playing on my nerves, but after trying to go to recovery mode (power on + vol down) and selecting vol up in 5 sec. it begins to boot to recovery the little green droid spins and then it dies showing little droid with red triangle and it wont boot to recovery, eventualy it just reboots to ROM.
I used viperMOD 4.6 to unlock and to install TWRP 2.1 and after that i tried 2.2 but the same red triangle. Did anyone encouter this problem erlier and maybe can provide solution to this nonsence?
FINAL EDIT: Ok, I fuguered it out. somehow every time I tried to proceed I failed to unlock. Finally I downgraded to .21 (think it is optional) and did a factory reset (wiped all data) and then tried to unlock again. Success!
I think this would be helpfull for those who get into same situation.
Try using goo manager to install TWRP.
Sent from my LS670 using xda app-developers app
epeereboom said:
Try using goo manager to install TWRP.
Sent from my LS670 using xda app-developers app
Click to expand...
Click to collapse
Thanx for a direction doing asap. And what does that mean red triangle with "!" in it? stock recovery or something like HTC phones have?
EDIT: In some way even after instaling TWRP with goo manager red triangle is there and I cant access recovery. strange
nikoltu said:
Hello,
I just unlocked my prime after realising that stock .28 firmware is doing so much of playing on my nerves, but after trying to go to recovery mode (power on + vol down) and selecting vol up in 5 sec. it begins to boot to recovery the little green droid spins and then it dies showing little droid with red triangle and it wont boot to recovery, eventualy it just reboots to ROM.
I used viperMOD 4.6 to unlock and to install TWRP 2.1 and after that i tried 2.2 but the same red triangle. Did anyone encouter this problem erlier and maybe can provide solution to this nonsence?
Click to expand...
Click to collapse
I'm afraid that you device is not UNLOCk. That happened to me. But that was .21 version.
Sent from my Transformer Prime TF201 using xda premium
skarfreak said:
I'm afraid that you device is not UNLOCk. That happened to me. But that was .21 version.
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
Well I used Asus tool apk "UnLock_Device_App_V6.apk" from support site to unlock and after finishing my tab rebooted creating log file in internal storage about unlocking my device. I believe that viperMod uses the same unlocking method as original app do. Can you provide workaround or other methods or anything to solve this unlocking problem? meenwhile I'll try searching forum and web for directions.

Help! S3 stuck in Samsung Logo. Need urgent advice.

Hello. This is my first time to post in XDA and unfortunately, I seem to have bricked (or soft-bricked) my phone.
I tried to unroot my phone, however, I got stuck in an infinite bootloop between the Samsung Startup, and the following message: Android upgrading screen saying Manual mode, Applying Multi-CSC, Applied the CSC code: BTU. Successfully applied Multi-CSC.
In an attempt to solve, I flashed the stock firmware in download mode through Odin. I got a success message, however, I cannot get past the Samsung Logo.
I would really appreciate if anyone can guide me through on how I can restore my phone. Thanks in advance.
Reboot into recovery mode and full wipe/ factory reset. Then reboot as normal
Sent from my GT-I9300 using xda premium
alchopop said:
Reboot into recovery mode and full wipe/ factory reset. Then reboot as normal
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I can't get into recovery. Is there a way to install cwn from download/Odin?
Are you sure that you can't enter into recovery mode bypressing the buttons? You was with usb debugging on? You can try to use adb "adb reboot recovery" to enter in recovery mode.
raulrooolz said:
I can't get into recovery. Is there a way to install cwn from download/Odin?
Click to expand...
Click to collapse
CF Root 6.4 Injects CWM via ODIN.
Your problem seems to be settings related tho, usually you get that fixed cleaning cache and dalvik, as stated before. Try to get into recovery mode to check that, and if that dont work I would try reflashing all over step by step.-
SkzBR said:
Are you sure that you can't enter into recovery mode bypressing the buttons? You was with usb debugging on? You can try to use adb "adb reboot recovery" to enter in recovery mode.
Click to expand...
Click to collapse
Yup pretty sure. Sorry I probably sound naive but how do u use adb reboot recovery?
To get to recovery press and hold 'up volume + home button + power button together'
Sent from my GT-I9300 using xda premium
alchopop said:
To get to recovery press and hold 'up volume + home button + power button together'
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I tried but it doesn't work....
raulrooolz said:
I tried but it doesn't work....
Click to expand...
Click to collapse
You need to hold them until your phone reboots. Takes a few seconds maybe 5-10
Sent from my GT-I9300 using xda premium
raulrooolz said:
Yup pretty sure. Sorry I probably sound naive but how do u use adb reboot recovery?
Click to expand...
Click to collapse
You will have to set adb on your pc.. Search for how to.. There are numerous tutos and vids.. Then fire up cmd from the adb directory and then type those commands..
Sent from the iPoop killer ==>>>
zoot1 said:
You will have to set adb on your pc.. Search for how to.. There are numerous tutos and vids.. Then fire up cmd from the adb directory and then type those commands..
Sent from the iPoop killer ==>>>
Click to expand...
Click to collapse
Congrats on your 1000th post
Sent from my GT-I9300 using xda premium
I'm sure the OP should be able to enter Download Mode and flash another ROM via ODIN. Try that if you can't access recovery.
Im 100% he's not doing it the right way.
If you can get in downloadmode to use Odin, you can also get in the Recovery menu.
Hold volume up , home, and power untill it reboots.
Keep holding it untill you see the white text, release power, but keep holding volume up and home.
Its not so difficult.
Verstuurd van mijn GT-I9300 met Tapatalk
This really makes you want to help people out. Ffs let us know if we helped or not
Sent from my GT-I9300 using xda premium
Bloody hell. I just went through the same thing.
I accessed Recovery, wiped data and cache. Then I rebooted. It worked. (>_>)
Well done mate. Glad you managed to sort it. Now, i wonder what happened to the OP
Sent from my GT-I9300 using xda premium
Helpful for me.
Thx guys!!!
please help guys ...flashed to stock rom in uk but couldnt still enter recovery...only download mode..ive also installed all types of custom recoveries but after a successful installation the phone just reboots back to screen logo and hangs there:crying:
Zibams said:
please help guys ...flashed to stock rom in uk but couldnt still enter recovery...only download mode..ive also installed all types of custom recoveries but after a successful installation the phone just reboots back to screen logo and hangs there:crying:
Click to expand...
Click to collapse
This happened to me to... i flashed a nordic stock rom, from JB because I wanted to go back to android 4.0.4.. now I'm stuck at the logo screen. I have noot rooted or anything so I cant go to recovery, only download mode.. What do I do?
same with the guys above but i had 4.0.4 and when i flashed stock i am stuck with the samsung logo. my s2 was fixed with the new stock rom as it seem it didnt support old stock after flashing new roms. may be is should try jb instead. all i did was used samsung tool should have done one by one myself. instead of using tool.
***Edit***
Okey I fixed it by going to recovery and then wiped up everything (dalvik/cache-data/cache partition) so it worked now... Here is the question. I bought the cell 2nd hand with paper and everything here is my question. on the box and back sticker of the cell phone it is XXXXXX/XX/XXXXXX/6 when i got the phone and did *#06# I got XXXXXX/XX/XXXXXX/04 and then when i tried to use samsung toolkit it went hanged in samsung logo so after i fixed it when i got back to the phone i checked my imei again now its XXXXXX/XX/XXXXXX/01 just the last is different is it okay or is something screwed my cell? btw it was locked to 3 and i used galaxysimunlocked (after) checking imei it is working but still i am concerned about the last number all the 14 numbers are right nothing changed.

[Q] Atrix Orange UK CWR removal. HELP...

Hi.
Please help.
I need to reset my phone to factory defaults. (as im sending it back to orange for a replacement).
I have rooted my phone, but havn't unlocked the bootloader. (rooted using peet's tools)
Its running stock orange UK 45.31.0.MB860.Orange.en.GB. (have never applied a rom to the phone).
I installed the CWM manager(months ago, as i was looking at the roms) from the play store, which installed the clockwork mod Recovery on my phone.
(however this i know wont work as i havnt unlocked the bootloder !)
Now when i try and perform a factory reset, (on button and vol down button).
I get the option for Android recovery.(as well as a shed load of other options).
When i select this with the vol up button, it errors with the following.
Failed to boot 2
Then when i press the vol up button the following is displayed.
Starting RSD Protocol Support.
I dont want to unlock the bootloader, i just need to ability to run android recovery and return the phone to its original state.
(So Orange accept the phone under the orange care agreement).
Please can you advise...
Stu.
Stuart-0 said:
Hi.
Please help.
I need to reset my phone to factory defaults. (as im sending it back to orange for a replacement).
I have rooted my phone, but havn't unlocked the bootloader. (rooted using peet's tools)
Its running stock orange UK 45.31.0.MB860.Orange.en.GB. (have never applied a rom to the phone).
I installed the CWM manager(months ago, as i was looking at the roms) from the play store, which installed the clockwork mod Recovery on my phone.
(however this i know wont work as i havnt unlocked the bootloder !)
Now when i try and perform a factory reset, (on button and vol down button).
I get the option for Android recovery.(as well as a shed load of other options).
When i select this with the vol up button, it errors with the following.
Failed to boot 2
Then when i press the vol up button the following is displayed.
Starting RSD Protocol Support.
I dont want to unlock the bootloader, i just need to ability to run android recovery and return the phone to its original state.
(So Orange accept the phone under the orange care agreement).
Please can you advise...
Stu.
Click to expand...
Click to collapse
flash the stock sbf via rsd
Sent from my MB860 using xda app-developers app
palmbeach05 said:
flash the stock sbf via rsd
Can this be done without an unlocked bootloader ?.
Im just trying to undo the work the CWM manager did..
I dont want to install a new rom, i need to return the phone to its factory defaults.
Stu
Click to expand...
Click to collapse
Stuart-0 said:
palmbeach05 said:
flash the stock sbf via rsd
Can this be done without an unlocked bootloader ?.
Im just trying to undo the work the CWM manager did..
I dont want to install a new rom, i need to return the phone to its factory defaults.
Stu
Click to expand...
Click to collapse
Flashing via rsd can be done anytime, regardless of the state of the device.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
palmbeach05 said:
Stuart-0 said:
Flashing via rsd can be done anytime, regardless of the state of the device.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Thankyou so much for your help...
I found the correct sbf file for my stock Orange uk GB 2.3.4 phone.
and managed to flash it, all be it with a couple of heart stopping moments.
(whilst the phone restarted into different modes, windows started searching for drivers !!!. even though i had installed them already..
This caused it to fail early on !.. after the main download.
However a restart later, and another issue. the phone has now been flashed back to the correct stock image..
Note to self, ensure windows is never set to auto install windows updates....
flippn thing caused the usb drivers to reload for the atrix phone.
still. one happy atrix customer..
Thanks for your help !!.
Click to expand...
Click to collapse
Help help.could u give me link which have you found?please.because im realy need the correct sbf firmware because i cant find it.......pleaseeeeee))) thanks sooo much
Cheers
Sent from my GT-I9000 using xda app-developers app
lidohd2 said:
Help help.could u give me link which have you found?please.because im realy need the correct sbf firmware because i cant find it.......pleaseeeeee))) thanks sooo much
Cheers
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
No problems.
I performed a google search for orange.sbf and came up with the following.
http://www.das8nt.com/sbffiles.html
This has a load of sbf files..
Specifically, the one i needed was.
1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31-release-keys-signed-Orange-GB.sbf
This worked a dream, putting the phone back.
(ive now got this replaced by orange).
Good luck....
and remember, before you do it, ensure windows is set to not auto update windows updates !!!!....
:cyclops:
I've had 3 phones changed by orange all rooted with unlocked bootloader.. never had a problem. Tho I do pay for orange care package...
Sent from my HTC One using xda app-developers app

Categories

Resources