Hi,
Hope u help me guys as im really sad my TG01 looking completely dead.
What i did. I wanted just flash new soft from Miro so i charged the phone and did flash my phone from SD card as i did many times. After my phone stack in Logo TOSHIBA and just flash over and over. So i found the way how to unbrick the phone. So as they said i conected the phone to charger and after i connected pin 1-3 and press the power button the mobile vibrate and that was the last thing hi did. After that i cant charge it, screen is black, mobile is not connecting to PC at all (pc dont even recognise that the phone was connected to USB no sign of new usb item or start to instal drivers or so) so i dont really know what happend or whats wrong. I installed TG down loader with driver but there is no sign of connection after i connect phone to PC.
Can anybody help pleas ????
MarvX said:
Hi,
Hope u help me guys as im really sad my TG01 looking completely dead.
What i did. I wanted just flash new soft from Miro so i charged the phone and did flash my phone from SD card as i did many times. After my phone stack in Logo TOSHIBA and just flash over and over. So i found the way how to unbrick the phone. So as they said i conected the phone to charger and after i connected pin 1-3 and press the power button the mobile vibrate and that was the last thing hi did. After that i cant charge it, screen is black, mobile is not connecting to PC at all (pc dont even recognise that the phone was connected to USB no sign of new usb item or start to instal drivers or so) so i dont really know what happend or whats wrong. I installed TG down loader with driver but there is no sign of connection after i connect phone to PC.
Can anybody help pleas ????
Click to expand...
Click to collapse
hey my friend
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
why press power button
plase do this step! by step!:
2 Short-Pin unbrick method
1. Copy a functional ROM on SD Card. PRG folder
2. Rename to TG01WP_00.enc
3. Put the battery in and plug Power- Kable. Charging LED flash RED *
4. short pin 1 and 3 (back side under sim card, remove black plastic) Hold the short and RESET. Hold short pin 1 and 3 for 10 sec. Display go on and ROM flash beginn
Yes i did tray this couple of times but with no success , when i plugged charger the charging red light dont flash red but i tray it anyway with charger on and off aswell.
I did it with the power button cose i read that somewhere and im scared i did burn or so something in MB as i had power charger plugged in i then short the pin 1 and 3 and then press power button. this is probably very bad way to go. the mobile is not responding to anything i tray
My TG01 has the same problem. I tried many times to flash a new ROM by "2 Short-Pin unbrick method" but nothing. @mirolg if you have some other ideas we are glad to hear you and to try on our dead phones.
Related
Hi
I was using my phone. It suddenly turned off. Now it won't turn on.
When I connect it to a charger there is red light for one second then phone looks dead (no LED, nothing). (normally there was constant red light).
Tried to reset it using buttons, tried connecting it with fastboot mode, flash mode - NOTHING.
What can I do?
Main problem is that this phone is under warranty but it has unlocked bootloader and there was CM9 loaded on it..
take to service centre ,.. if u cant turn it on they cant too
Force off the phone
Volume down plus power button until u feel 3 vibrations
Then dun try to switch on
And try flashing ftf
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Force off the phone
Volume down plus power button until u feel 3 vibrations
Then dun try to switch on
And try flashing ftf
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
please read topic.
phone is not even charging. reboots using volume down / power are not working.
Fastboot not working
flashmode not working.
Well, will send my phone
kubek1334 said:
please read topic.
phone is not even charging. reboots using volume down / power are not working.
Fastboot not working
flashmode not working.
Well, will send my phone
Click to expand...
Click to collapse
Yes I read it bro
It has never happened before that a phone has hardbricked just by itself
If u send it... U will b asked for money... Alot I mean :/
u can try removing the battery by yourself. then recharge the battery using all purpose chargers like This >>>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it will probably work then
probably...
kubek1334 said:
probably...
Click to expand...
Click to collapse
it worth try. better than a Brick
for me this trick worked. not sola though
The bootloader is broken. Send it to the repairing point or use JTAG to flash it.
zhy0919 said:
The bootloader is broken. Send it to the repairing point or use JTAG to flash it.
Click to expand...
Click to collapse
Jtag works for xperia novathors??? :/
kubek1334 said:
Hi
I was using my phone. It suddenly turned off. Now it won't turn on.
When I connect it to a charger there is red light for one second then phone looks dead (no LED, nothing). (normally there was constant red light).
Tried to reset it using buttons, tried connecting it with fastboot mode, flash mode - NOTHING.
What can I do?
Main problem is that this phone is under warranty but it has unlocked bootloader and there was CM9 loaded on it..
Click to expand...
Click to collapse
Take the battery out for about 20 seconds and put it back on again, dont turn it on, press the volume down button and get a usb cable and plug one end to the pc and and the other to ur phone keeping the volume down button pressed. If there is a green light that means it can be fixed.
will send it for warranty.
I didn't agree for extra charge so it wont be a problem,
got my device replaced under warranty
Device was full bricked with unlocked bootloader via sony site (twice!) and loaded cyanogenmod with custom kernel
Hi people, I have problem. I tried flash my LG to back original stock ROM V10J_00.kdz, but this not work. I flash another kdz file (P713) but after that i found that will be very big problem. And here is it. Phone doesnt on, when i turn on, on the display appears blue stripes and thats all. When i want to get to EMERGENCY mode, again displayed a blue strips and thats all..
So please, is here anybody who can help me?
I have the same problem
I have a lg L5 II E450F and all screen is black dont display anything I tried with pressing both buttons I searched a lot and the unique solution I tried is pressing the two buttons of volume and connect but in lg support tool told me that all is fine and flashing correctly but my screen don't display or the phone dont vibrate or sound nothing please help me too
Pecan6 said:
Hi people, I have problem. I tried flash my LG to back original stock ROM V10J_00.kdz, but this not work. I flash another kdz file (P713) but after that i found that will be very big problem. And here is it. Phone doesnt on, when i turn on, on the display appears blue stripes and thats all. When i want to get to EMERGENCY mode, again displayed a blue strips and thats all..
So please, is here anybody who can help me?
Click to expand...
Click to collapse
Onilink90 said:
I have a lg L5 II E450F and all screen is black dont display anything I tried with pressing both buttons I searched a lot and the unique solution I tried is pressing the two buttons of volume and connect but in lg support tool told me that all is fine and flashing correctly but my screen don't display or the phone dont vibrate or sound nothing please help me too
Click to expand...
Click to collapse
First read this :
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
*CLICK THIS AND IN NEW TAB IN ADDRESS BAR REPLACE "INSERT_YOUR_IMEI_HERE" FOR YOUR ORIGINAL IMEI (BEHIND THE BATTERY) THEN YOU WILL SEE LINK ON THE PAGE CLICK THAT AND YOU WILL DOWNLOAD DIRECT FROM LG SERVERS
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button or VOL+ or VOL+ and VOL-
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
EDIT 5a BROKEN SCREEN SPECIAL
since your screens don't display you will have to test all key combinations
you can recognise download mode by opening device manager on pc and checking if only the 2 marked drivers are installed *(NOTE THAT PORT NUMBER MAY VARY)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
Enjoy your NEW OLD phone
Click to expand...
Click to collapse
2 Report back
Tablet Z with unlocked bootloader and rooted 10.1.C.0.370
My issues occured after a downgrade to 4.1.2.
I CAN:
1) Start my tablet. Camera doesnt work though (Error: Camera not available)
2) Charge my tablet (Only partially... When the tablet is ON, it doesn't charge. When OFF it charges to about 50% - odd behavior)
3) Go into safe mode
4) Go into fastboot mode (solid BLUE LED)
5) Use the memory card and use root apps (maybe this could help restore?)
I CAN NOT:
1) Get my PC to recognize that a USB device is connected. Neither in Mass Storage mode, Media mode, nor fastboot mode.
- Tried with several cables and computers (this is not a driver issue, since it won't show up at all in device manager)
- Flashtool obvious;y says, no device connected
2) Get in to flashmode: device blinks red for about half a second, then green for half a second, and then LED is off. Nothing recognized via USB on PC
3) Get into recovery mode
4) Update over WIFI (fails because unlocled bootloader I suppose)
Any help would be greatly appreciated!
--------------------------------------
I managed to make an adb connection to my PC via WIFI
On the tablet:
1) Opened a root terminal
2) setprop service.adb.tcp.port 5555
3) stop adbd
4) start adbd
On my PC:
1) adb connect <network IP of tablet>
Printscreen of Flashtool connected via adb WIFI:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does this get me any closer to fixing my USB problem or to flashing an update/recovery?
Another update:
I hadn't tried using my camera at all. I just tried and it says: Error: Camera not available
Maybe its related to the USB connectivity issue...
Will pay 60 bux via paypal to whoever solves my problem, since Sony won't!
Possible?
Is it possible to flash in flashboot mode via SD Card (No recovery present on tablet) using some kind of script before putting the tab in flashboot mode??
Interesting Info
Hey guys,
got some interesting info regarding charging cycles from: http://sony-xperiasp.blogspot.de/2013/08/recover-all-2012-xperias-from-soft-brick.html
Its not really for the tablet Z, but sounds very similar.
My charging cycle is about at 3. When phone is off, it will start at a RED led, and go upto abot 20-30%, where the Kernel kicks in. As soon as that happens, as described in the article, a short click of the power button shows the battery icon. BUT, it doesnt show the battery charging anymore!
In short, as soon as the Kernel comes on, my battery stops charging. Now my QUESTION: Is it possible there is a minimum charge to be able to go into flashmode?? Because when I try to go into flashmode, it blinks green and then red. Maybe this means not enough battery charge to go into flashmode?
Can someone PLEASE, check this on their working Tablet Z?! With an extremely low battery charge, if they are able to go into flashmode! (steady green)
Would really appreciate! Thanks!!
Problem solved... 2 USB cables faulty, got a new one. Now it charges and goes into flashmode. Flashed stock, all OK except the Camera. Still says Camera unavailable. Thats maybe really the thin wire inside loose!
centinel_x said:
Still says Camera unavailable. Thats maybe really the thin wire inside loose!
Click to expand...
Click to collapse
99% flexible cable that connects camera to motherboard got loose.
Hello everyone, i have hard bricked my PhonePad Duo S7 / ppxs7 (MT6737) while installing firmware update by accidentally unhooking the cable. I am wondering if anyone can help me fix this issue. The phone hardware is all in good condition but the software seems to be completely wrecked, the phone doesn't start at all no matter what combination of buttons and how long i hold it. I tried to flash it again, to no avail because my PC doesn't recognize the phone anymore. I tried to charge it and it didn't do anything either. When i connect the phone to the PC i hear the connection sound and a warning pops up "device not recognized", you can see it in the image i attached below ( also image of what it looks like now in device manager ). I am confident there is a way to fix this, i just need to find a way to make it recognizable once more. Ive sent an email to the manufacturer as well but i hope i might in the meanwhile find a solution as they are not guaranteed to respond, i do not have warranty on this phone. I would be extremely super thankful to any input related to my case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As long the the hardware is not damaged, it is recoverable. First, are you unchecking preloader when flashing? If still it doesn't work., then keep phone charging overnight to see if you get a response. Other than that, you might have to get your motherboard replaced. :good:
minute214 said:
Hello everyone, i have hard bricked my PhonePad Duo S7 / ppxs7 (MT6737) while installing firmware update by accidentally unhooking the cable. I am wondering if anyone can help me fix this issue. The phone hardware is all in good condition but the software seems to be completely wrecked, the phone doesn't start at all no matter what combination of buttons and how long i hold it. I tried to flash it again, to no avail because my PC doesn't recognize the phone anymore. I tried to charge it and it didn't do anything either. When i connect the phone to the PC i hear the connection sound and a warning pops up "device not recognized", you can see it in the image i attached below ( also image of what it looks like now in device manager ). I am confident there is a way to fix this, i just need to find a way to make it recognizable once more. Ive sent an email to the manufacturer as well but i hope i might in the meanwhile find a solution as they are not guaranteed to respond, i do not have warranty on this phone. I would be extremely super thankful to any input related to my case.
Click to expand...
Click to collapse
Hope I helped.
I was experimenting on an old device (lenovo tab 2 a7 30hc) and hard bricked it.
I've been trying to install the stock rom from SP Flash tool and installed the mtk vcom preloader drivers but the phone still won't get detected.
Someone please help me out here please.
rishabhrocks said:
I was experimenting on an old device (lenovo tab 2 a7 30hc) and hard bricked it.
I've been trying to install the stock rom from SP Flash tool and installed the mtk vcom preloader drivers but the phone still won't get detected.
Someone please help me out here please.
Click to expand...
Click to collapse
Install vcom and Lenovo drivers.
minute214 said:
my PC doesn't recognize the phone anymore. I tried to charge it and it didn't do anything either. When i connect the phone to the PC i hear the connection sound and a warning pops up "device not recognized",
Click to expand...
Click to collapse
I had similar soft brick problem with MTK tablet. Generally you need to remove battery (or unplug the battery connector) and install (plug) it back. If your battery has soldered wires you need to unsolder Vcc (usually red) wire and solder it back after a while (like a couple minutes after). If your battery is not able to remove/unsolder/unplug your only solution is discharge the battery and it can takes a long time.
After I updated pixel 6 to android 13,phone doesn't work became bricked and I can't fix it because when I plug it into my computer and see the device manager in windows,but it is not detected by `adb devices` or `fastboot devices`.I see it detected in seconds and disappear by watching device manager as a " USB serial port device (COM 3)" in windows 11
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
in windows 7 & ubuntu detected as pixel CDC- ACM (Pixel ROM Recovery )device because devices manager in win7 can't find any driver compatible so it detected as itself in "Other devices"
in VM box :
while I hold down the power button so I can't fix it,how to restore my phone and flash it in this mode I think this mode is EDLI tried to boot in bootloader by pressing press power + volume down and power + volume up and all together but nothing work , the phone is deadI have tried to fix by this post but unfortunately it doesn't work https://forum.xda-developers.com/t/guide-unbrick-pixel-6-oriele-or-pixel-6-pro-raven.4441245/I have escalated this issue in google tracker since 2 months but i got NO ANSWER and NO HELP https://issuetracker.google.com/issues/243636259
is anyone have any idea to fix my ? i will appreciate any try PLZ help me
Very likely you can't.
From your description, when you flashed it, A13 was updated only on one slot with the new bootloader, while the second slot is still stuck with the previous bootloader. During the flashing (how did you flash?), something went wrong, so the Pixel wanted to boot from the second slot with the "old" bootloader and the "Anti-Roll-Back" kicked in.
RMA and hopefully get an exchange
Cheers
Follow this steps and let us know if it worked for you
1. Unplug the cable from your phone
2. Press and hold for at least 15 seconds the power button then release
3. Connect a cable from your pc to your phone but you need to press volume up and hold it until you connect the cable, once connected release the button your phone shall turn on fastboot mode, it it worked just proceeded and flash a13 again, just download it from it's official source
14. Profit
tom1807 said:
Very likely you can't.
From your description, when you flashed it, A13 was updated only on one slot with the new bootloader, while the second slot is still stuck with the previous bootloader. During the flashing (how did you flash?), something went wrong, so the Pixel wanted to boot from the second slot with the "old" bootloader and the "Anti-Roll-Back" kicked in.
RMA and hopefully get an exchange
Cheers
Click to expand...
Click to collapse
i have flashed using fastboot commands and that was on both-solts
Do you have idea how manufacturing put the Rom on devices? OR about
cdc-acm connection?
J0nhy said:
Follow this steps and let us know if it worked for you
1. Unplug the cable from your phone
2. Press and hold for at least 15 seconds the power button then release
3. Connect a cable from your pc to your phone but you need to press volume up and hold it until you connect the cable, once connected release the button your phone shall turn on fastboot mode, it it worked just proceeded and flash a13 again, just download it from it's official source
14. Profit
Click to expand...
Click to collapse
i have tried but nothing work