Hi guys pls could someone help me im unable to get my computer to recognize my galaxy sii it just say usb unrecognised it used to recognise it but now it doesnt iv tried every thing any help would be greatly apreciated!!!!
Sent from my GT-I9100 using xda premium
try installing/updating KIES on your computer. Disable USB debugging from phone settings. then try connecting again. Launch KIES and see if the device is recognized. You havent mentioned if you made any changes on the phone from Stock ROM.
Also check windows update...for any driver downloads
At least you could tell us that you solved your problem
Sent from my sgs2 running cm9
port76 said:
Hi guys pls could someone help me im unable to get my computer to recognize my galaxy sii it just say usb unrecognised it used to recognise it but now it doesnt iv tried every thing any help would be greatly apreciated!!!!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
First make sure you have proper drivers installed
install PDAnet and select samung. Now connect your s2
if it still doesnt install the drivers, its the fault in the computer because if it says usb device not recognised, then its his fault
try in the backside usb ports --> worked for me one
or power off your PC and remove the plug and wait for five seconds and then turn it on (im mean power it on )
now you should be able to connect your device
Related
Hello, I'm trying to connect my s5830 to my PC; Phone and computer beep like they are working, but it keeps giving me a "USB device Not Recognized" message. (it does charge by the way)
As per my previous research, this is what i've tried so far:
- On other computers, windows 7 and xp, same message.
- replaced usb cable, same message.
- factory wipe, same thing.
- cache wipe, wont run(?) - maybe this is a clue?
Its running on stock 2.2.1 firmware with no mods, not even extra apps. I actually have another s5830 (from a friend) and it works fine when i connect it to my home computer (windows 7) or my laptop (windows xp)
Any ideas of how to solve the problem? Thanks in advance.
Delete your drivers, reinstall kies and reconnect.
XDA ♥
Just tried that, no luck,thanks for the advice.
Sent from my GT-S5830L using XDA App
Delete the usb driver, uninstall kies then restart your pc.
After restart, dont plug your phone to the pc yet. Install kies.
After installing kies, plug your phone and let kies detect it.
Sent from my GT-S5830 using XDA Premium App
No luck...maybe something is wrong with the phone itself?
Sent from my GT-S5830L using XDA App
Just CONNECT to another USB port.
If its not helping and like I see you have same problem with other PC-s too, then I think its your phone HARDWARE problem. Bring it to SAMSUNG service.
CHEERS!
Thanks, im going to take it tomorrow to see about getting it fixed.
Sent from my GT-S5830L using XDA App
I'm facing the similar problem too. Kies on my pc couldn't detect my SGA. N there's no "usb connection" n " usb debugging" icon appear on my SGA. What actually is the problem?
I had this problem after upgrading kies the solution was inside kies under tools there is a install driver option kies then loaded what I presume are newer drivers and it worked
i tried install driver for a few times. the problems remain unsolved! i connect my SGA to pc, the only thing it can do is charging...
kirokiroshin said:
i tried install driver for a few times. the problems remain unsolved! i connect my SGA to pc, the only thing it can do is charging...
Click to expand...
Click to collapse
Try to install THESE USB DRIVERS. They worked for me very well!
CHEERS!
casiocas said:
Try to install THESE USB DRIVERS. They worked for me very well!
CHEERS!
Click to expand...
Click to collapse
thx for helping! but i hv Kies installed in my pc. doesn't that mean i hv the driver already?
My seem irrelevent... but you may want to check your permissions for USB... may be the USB permission has been turned off.
Try using any externel drive see if it works.
matrixloaded said:
My seem irrelevent... but you may want to check your permissions for USB... may be the USB permission has been turned off.
Try using any externel drive see if it works.
Click to expand...
Click to collapse
thx for helping! i tried any external drive n usb port i hv... external drive works very well. only SGA has problem.
Hi :
I am having a problem with my Galaxy ACE. Every time i connect it to the computer, i get the 'USB Device not recognized' error message.
However, the phone does charge, either connected via USB or at the charger.
I've already tried on different computers, with different cables, both on Windows 7 and XP, and with KIES installed and not installed.
On some pages, i found that the problem was solved by changing USB and UART to PDA instead of MODEM in the PhoneUtil menu. And that the PhoneUtil menu is accessed by pressing *#7284# . When i press that on my ACE, i get a ServiceMode menu that seems to make diagnostics, but don't let change anything to PDA or MODEM.
I still have not tried if ODIN recognizes it... i will try later, but any help will be highly appreciated.
sjrm said:
Hi :
I am having a problem with my Galaxy ACE. Every time i connect it to the computer, i get the 'USB Device not recognized' error message.
However, the phone does charge, either connected via USB or at the charger.
I've already tried on different computers, with different cables, both on Windows 7 and XP, and with KIES installed and not installed.
On some pages, i found that the problem was solved by changing USB and UART to PDA instead of MODEM in the PhoneUtil menu. And that the PhoneUtil menu is accessed by pressing *#7284# . When i press that on my ACE, i get a ServiceMode menu that seems to make diagnostics, but don't let change anything to PDA or MODEM.
I still have not tried if ODIN recognizes it... i will try later, but any help will be highly appreciated.
Click to expand...
Click to collapse
I had this problem too. Turns out I didn't have the driver for the phone.
I use Linux on a daily basis, and totally forgot that Windows needs driver software for most of its hardware.
Sent from my GT-S5830
neither ODIN
neither ODIN is recognizing the phone... what else can i do ? any help, plz ?
Give it at service center.
Sent from Galaxy Ace GT-S5830 using Grif's Cyanogenmod & allinone ram script.
Dont jus say thanks, use d 'THANKS' button. [XDA RULE]
What do you need to connect to the PC for?
Make sure USB debugging is off:
Settings-Applications-Development-USB Debugging
Connect to PC, if you still get the message download and install the phones drivers from the Samsung website.
Hi :
I need the USB connection for :
1. Use the USB tetherig to connect my laptop to internet using cell phone data plan
2. Read the SD Card sometimes
I installed CWM4 on the phone.. and flash a custom ROM CM7, believing this was a software issue.. but problem remains the same.
I will try to leave the phone to service next week. But as i had flashed it, i¿m not sure if the provider will accept it as warranty.
Are you using the original USB cable?
Sent from my GT-S5830 using XDA Premium App
-SGA- said:
Are you using the original USB cable?
Sent from my GT-S5830 using XDA Premium App
Click to expand...
Click to collapse
Yes.. i have used the original, and also two other different cables
I am traveling this week, i will try to take the phone to service next week
Hi all,
I've got a Galaxy Tab P7510 and when I connect it to USB to my PC, it installs the drivers for the GT-P7510 - Success, Samsung Mobile USB Composite Device - Success, and then it starts to install Samsung Mobile USB Modem, gets to 100% then says Failed. And when I try to use Kies it endlessly says "Connecting" I've tried reinstalling Kies, debug mode on and off, reinstalling the drivers, rebooting my PC inbetween etc etc. I can't even get ODIN to detect it on COM while its in Download mode even though on screen on the Tab it says its ready. Trying to do anything in ODIN though results in no successes and no fails.
Can someone help me with this please
Thanks
Have you tried using the the USB ports on the rear of the pc?
Sent from my GT-I9100 using xda premium
stoney73 said:
Have you tried using the the USB ports on the rear of the pc?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes I have
Try another computer like a friends or something. Do you have a laptop to try it on. Might work you never know..?
dvirring said:
Try another computer like a friends or something. Do you have a laptop to try it on. Might work you never know..?
Click to expand...
Click to collapse
Trying it on a laptop now.
Managed to get it to work fine on a laptop, The problem is that the SAMSUNG Mobile USB Modem driver install always fails on my PC. Why is this!?!?!
No Idea why it failed but drivers do fail from time to time installing in some cases.
Glad you got it working!
You can try the other USB ports.
And search for the USB drivers in this or the gt-i 9000 forum. I never ever use kies even it is similar to my name
Hi guys,
Suddenly some issue appeard with my phones USB. When I connect the phone to PC, it can't identify the phone - USB Device Not Recognized message appears
In Canada everything was OK. returned home and here it is, the issue
Please help. Without USB connection I can't unlock it for my current network
PC requires USB drivers is the first step .
jje
USB Driver is stalled. At least it was and working with my previous Samsung Captivate
If you provide link for the latest driver will be great
samsung .com support Kies software .
jje
Kies doesn't help. The phone is connected but unrecognized.
Any Idea?
UP///
Sent from my SAMSUNG-SGH-I897 using xda premium
Donmarques72 said:
Kies doesn't help. The phone is connected but unrecognized.
Any Idea?
Click to expand...
Click to collapse
You have a driver issue, please don't try to tell us, the experiences the problem is something else, use common sense, uninstall Kies, reboot your computer and install again. If that doesn't do it then you have a problem with your cable or your phone
Whenever I connect my SGS3 to my pc running windows 7 , it shows usb device not recognized.. I have installed the usb drivers... I reinstalled it to make sure.. Still this shows.. I cannot copy files into my device nor can I flash a firmware. What should I do ?? Is anyone else experiencing the same problem ?? Sorry for creating this thread.. But I thought this is important !!!!
THANKS IN ADVANCE
qwertyedu said:
Whenever I connect my SGS3 to my pc running windows 7 , it shows usb device not recognized.. I have installed the usb drivers... I reinstalled it to make sure.. Still this shows.. I cannot copy files into my device nor can I flash a firmware. What should I do ?? Is anyone else experiencing the same problem ?? Sorry for creating this thread.. But I thought this is important !!!!
THANKS IN ADVANCE
Click to expand...
Click to collapse
i have the same problem with my archos 80g9.
when i asked in here i was told that it was most likely a damaged cable.
not sure though as i dont have another cable to test this theory
Did you try to change from MTP to PTP when you connect your phone?
Connect phone notification connexion usb pc click on it and change to see if it works...
Every question should be on Q/A section.
Sent from my GT-I9300 using Tapatalk 2
Instal pdanet.exe
Sent from my GT-I9300 using xda app-developers app
No, I dint change mtp to ptp !!! and I dint follow the second sentence of your reply !