Hello Guys i need some advice,i trying to fix my friend brand new motorola razr xt910 en.eu.handset is restarting himself every 20-60 sec. can't really do anything i was trying update to version 2.3.6 via sd card and i get info E:signature verification failed installation aborted.Ok so i copy this update.zip to internal storage reboot and again can't even see update.zip.
Fine,i connected to pc and is restarting himself even more often.
I have no idea what to do next.I think i was trying every possible way.
Maybe that is not software problem but hardware any idea?
Thank for help
neovisage.HD2 said:
Hello Guys i need some advice,i trying to fix my friend brand new motorola razr xt910 en.eu.handset is restarting himself every 20-60 sec. can't really do anything i was trying update to version 2.3.6 via sd card and i get info E:signature verification failed installation aborted.Ok so i copy this update.zip to internal storage reboot and again can't even see update.zip.
Fine,i connected to pc and is restarting himself even more often.
I have no idea what to do next.I think i was trying every possible way.
Maybe that is not software problem but hardware any idea?
Thank for help
Click to expand...
Click to collapse
Please connect your phone via usb to your pc & enter fastboot mod. Flash orginal firmware with this tool: http://forum.eternityproject.eu/mot...a****-ed-motorola-razr-official-roms-t27.html.(for En.Eu you should try this fastboot files: SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot).
Related
When ever I try either the Fast boot android recovery, or Factory Reset from the Atrix [rooted W locked boot loader, stock gingerbread] it will reboot only to stop at Failed to Boot 2.
Removing the battery usually recovers the phone.
How to I get around th is problem, or do I have to take it back to AT&T for a swap out? [Or is that possible on a rooted phone?
Going in circles here other wise.
Thanks in advance.
I have a botched CWM install attempt and i am at the same screen whenever i turn on the phone. I am going to flash using RSD and see if that recovers it. Ill post once i find out.
Got tired of going in circles, found the OEM ATT stuff, used RSD lite, and installed the SBF
Now I'm back to normal, bloat and all.
jesgrew said:
Got tired of going in circles, found the OEM ATT stuff, used RSD lite, and installed the SBF
Now I'm back to normal, bloat and all.
Click to expand...
Click to collapse
bro, i oso facing same problem w u. the screen only shows "failed to boot 2. starting rsd mode"
would u like plz to give me step by step to recover it? thx so much, i really appreciate it
c1asis said:
bro, i oso facing same problem w u. the screen only shows "failed to boot 2. starting rsd mode"
would u like plz to give me step by step to recover it? thx so much, i really appreciate it
Click to expand...
Click to collapse
I read the NooB guide here on XDA and there are links to get the needed files: RSD Lite, and the AT&T OEM Gingerbread & current firmware SBF file.
I pulled the battery to recover my phone, then fully charged it up.
Made sure it was in USB debug mode.
Then did the Hardware Reset again.
When it stopped at "failed to boot 2. starting rsd mode" I started RSD lite on my PC, Pointed it at the SBF file, and installed.
It took some time, maybe 5~12 minutes?
But it rebooted a few times and I was good to go.
To test it I did several hardware resets, All A Ok.
Peace here till they get Cyanogen stable
jesgrew said:
I read the NooB guide here on XDA and there are links to get the needed files: RSD Lite, and the AT&T OEM Gingerbread & current firmware SBF file.
I pulled the battery to recover my phone, then fully charged it up.
Made sure it was in USB debug mode.
Then did the Hardware Reset again.
When it stopped at "failed to boot 2. starting rsd mode" I started RSD lite on my PC, Pointed it at the SBF file, and installed.
It took some time, maybe 5~12 minutes?
But it rebooted a few times and I was good to go.
To test it I did several hardware resets, All A Ok.
Peace here till they get Cyanogen stable
Click to expand...
Click to collapse
whats ur version before ur device got bricked? i dont know my version.
and if i used atnt unlocked phone, but i used it in singapore. can i use the atnt US version or OEM South East Asia? thx. realy confusing phone.
also when i connect my phone and i open RSD. it won't detect the phone. the device list in the RSD is empty.
c1asis said:
also when i connect my phone and i open RSD. it won't detect the phone. the device list in the RSD is empty.
Click to expand...
Click to collapse
Here is what little I know:
Put the Atrix in USB debugging mode.
Connect the phone to the USB cable, and the PC.
Change the USB mode to none.
Click OK
Start RSDlite, then it should see your phone.
And if you have a None US AT&T phone you will need that providers OEM SBF file.
Next move for me is unlocking the boot loader.
I used Pete's Motorola Tools for rooting.
Hi,
With ATT 4.5.91 rooted unlocked phone upgrading to 4.5.141, the process failed after RSD lite 99% completed, the atrix stoped there with the message as follows:
"fail to boot 1 PwrReason: PWR_KEY_PRESS
Starting fastboot protocol support", and I re-fastbooted and
found out "recovery error 0x180004" and "OEM unlock is not implemented".
Please help. Thanks a lot.
If you still have full battery life you will need to flash 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011-unlocked.sbf. I'm guessing you flashed 1ff-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-att-us-gas_na_olpsgbattspe_p011.sbf....I had this exact issue just yesterday. But you have to have a full life battery or at least enough to fully flash otherwise you're in serious trouble after that. By the way, what method were you using to upgrade to .141? It's not recommended on an unlocked bootloader though I tried it over Moto software update and it worked fine (only tried this cus the OTA update screwed up my wifi and bluetooth). Hope the info helps, good luck!
weisey9 said:
If you still have full battery life you will need to flash 1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011-unlocked.sbf. I'm guessing you flashed 1ff-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-att-us-gas_na_olpsgbattspe_p011.sbf....I had this exact issue just yesterday. But you have to have a full life battery or at least enough to fully flash otherwise you're in serious trouble after that. By the way, what method were you using to upgrade to .141? It's not recommended on an unlocked bootloader though I tried it over Moto software update and it worked fine (only tried this cus the OTA update screwed up my wifi and bluetooth). Hope the info helps, good luck!
Click to expand...
Click to collapse
WEISEY9 thanks, I failed the OTA to 2.3.4-4.5.141, so I used manual update using sd card to update.
Sorry I can't find out the unlocked.sbf you mentioned above. Can you inform where I can download it. Thanks again.
This happened to me before, just open rds lite, connect ur phone yo ur PC, if is not!! It might be detected like fast mode on rsd lite on ur PC!! Pull out the battery, till fastmode(status) disappears from rsd lite! ( u can try power button + volume up key I don't remember how I get it) then just use pudding (the small file, ) ..
Sent from my MB860 using XDA App
fail to boot 1 updating to ATT 2.3.6 4.5.141
narezese said:
This happened to me before, just open rds lite, connect ur phone yo ur PC, if is not!! It might be detected like fast mode on rsd lite on ur PC!! Pull out the battery, till fastmode(status) disappears from rsd lite! ( u can try power button + volume up key I don't remember how I get it) then just use pudding (the small file, ) ..
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Yes that is the reason I request for help to get pudding or UNLOCKED.sbf to flash back to ATT 2.3.4 4.5.91.. As in China I can't access to those websites that provides said file as below (don't know what is the reason).
"1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011-unlocked.sbf."
Please help if you can acess the file please send to my email below
"[email protected]" Thanks.
The file size is big
Hello guys!
I've a no-brand italian Galaxy S2 and since i've installed the first official ICS version (the LPQ from Poland) i started having some serious issues.
The problem number one: i can't install any different firmware than ICS or Gingerbread 2.3.6 (ILA2 and ILA3). If i try 2.3.4 or 2.3.3 the result is a bunch of red words like "E: failed to mount /cache (No such file or directory)" or "E: failed to mount /efs (No such file or directory)".
The second problem is about the USB specifically when i use the phone as a mass storage. Suddently it disconnects. It can be after 5 minute, 10 minute or even after 30 seconds. It's not a PC problem since i've formatted it and the phone keeps disconnecting!
I believe the two things are linked somehow, that's why i made only one thread.
Hope to get through this with you
PS: Of course i've tried a factory reset, a deep clean 1 and 2. Still nothing.
How are you trying to downgrade?
Sent from my GT-I9100 using XDA
By Odin with only PDA avaiable.
A few things regarding the USB.
Have you tried it with different usb ports and different computers? If they both still cause the problem, have you tried using a different USB cord?
First I'd try what the person above me said.
If it doesn't work on other computers, I recommend you to try to install another firmware thorough recovery. Something like CyanogenMod or MIUI to check if the problem exists there too.
Sent from my GT-I9100 using XDA
IssamGS2 said:
Hello guys!
I've a no-brand italian Galaxy S2 and since i've installed the first official ICS version (the LPQ from Poland) i started having some serious issues.
The problem number one: i can't install any different firmware than ICS or Gingerbread 2.3.6 (ILA2 and ILA3). If i try 2.3.4 or 2.3.3 the result is a bunch of red words like "E: failed to mount /cache (No such file or directory)" or "E: failed to mount /efs (No such file or directory)".
The second problem is about the USB specifically when i use the phone as a mass storage. Suddently it disconnects. It can be after 5 minute, 10 minute or even after 30 seconds. It's not a PC problem since i've formatted it and the phone keeps disconnecting!
I believe the two things are linked somehow, that's why i made only one thread.
Hope to get through this with you
PS: Of course i've tried a factory reset, a deep clean 1 and 2. Still nothing.
Click to expand...
Click to collapse
If you are still facing USB connection problem to ODIN,
try this method to root your phone without a PC....http://forum.xda-developers.com/showthread.php?t=1501719 since your are on the ICS official ROM
after rooting choose any Custom GB version of ROM put it on the SD card, and use the clockworkmode update file again to flash CWM and choose zip file from SD card and flash the ROM.....
Hi Developers
I wish some one help me in this
i have razr xt910 and i made upgrade to Jb And for some reason i got stuck on the customer id error screen
i'm able to boot the device throw BP tools only it's ok but the problem is that i need to use my usb cable but the usb cable is not reading in this mood (BP tools only) and also the phone is not rooted now and unable to root it because the pc can not find the device so please does any one can help ?????
Any answers???
mostafas60 said:
Any answers???
Click to expand...
Click to collapse
Hello there, yesterday I had the same problem, so I find a thread in the forum It will help you to resolve the problem you have, but, the error is that the CID was erased, I hope you have a backup of your phone.
Just follow the steps. I have to tell you, when I did it, an error was on screen, "Flash Fail", or "Build Error".
I Fixed it installing other JB Retail but this time a FULL one and I made a Factory Cable (because of Battery Low). So thats it.:laugh:
Try to Flash it in AP FLash Mode, your PC will recognize your razr! make sure you hace the drivers installed.
montdeska said:
Hello there, yesterday I had the same problem, so I find a thread in the forum It will help you to resolve the problem you have, but, the error is that the CID was erased, I hope you have a backup of your phone.
Just follow the steps. I have to tell you, when I did it, an error was on screen, "Flash Fail", or "Build Error".
I Fixed it installing other JB Retail but this time a FULL one and I made a Factory Cable (because of Battery Low). So thats it.:laugh:
Try to Flash it in AP FLash Mode, your PC will recognize your razr! make sure you hace the drivers installed.
Click to expand...
Click to collapse
Thanks for your reply&support but actually I like this room of jb and it's very fast and also I don't have cid or any backup so I'm looking for special solution without erasing current job
All what I need is to make the boot menu manager but all what it needs is to root my phone
Is there any developer to help?/?
no one
Developers Heeeeeeeeeeeelp
some one answer me please
Hi,
I just tried the rooting method using Kingroot, but the phone got soft-bricked and stays in endless loop after the vodafone logo.
I already booted into stock recovery and did a factory reset, but the problem subsists, so i am desperate for a STOCK rom (kingroot must have messed up some files ... )
I have a V895N-2GVDPT1 (Vodafone Portugal)
-- EDIT --
I have found the KERNEL SOURCE under the "Open Source Code" here: http://www.vodafone.com/content/index/about/what/devices/smartprime6.html !!!
Thanks in advance!
Hi,
How You use that source code for reinstall the system?
I bricked the phone...
Can you boot to fastboot/download mode?
Try to use ADB to restore the stock ROM files, unfortunately I don't know where to find the stock ROM files
Sent from my VF-895N using XDA Free mobile app
Please help
trentinmarco said:
Hi,
How You use that source code for reinstall the system?
I bricked the phone...
Click to expand...
Click to collapse
i bricked my smart prime 6 aswell do you know how to use the sorce code?
Num3 said:
Hi,
I just tried the rooting method using Kingroot, but the phone got soft-bricked and stays in endless loop after the vodafone logo.
I already booted into stock recovery and did a factory reset, but the problem subsists, so i am desperate for a STOCK rom (kingroot must have messed up some files ... )
I have a V895N-2GVDPT1 (Vodafone Portugal)
-- EDIT --
Thanks in advance!
Click to expand...
Click to collapse
Hi,
sorry to read that, actually I got this phone from a friend who lost mine (here in Czech Republic) and I did root it, but I saw that many people had problem after rooting so I un-rooted and at the moment it's working properly... I think there is also this "Purify" maybe it did mess with the rom uninstalling things or who knows what...
I hope you find the way to restore the software...
Hi guys i m looking for rom for this phone as well i have 2 phone after i update phone phone stuck now can some one give me firmware for this phone plz
Hey, I bricked this phone as well
any stock rom to download and flash in recovery?
please, thanks a lot
Hi, i am looking for the stock rom for this phone.
Please share link.
Thanks
dragontass said:
Hi, i am looking for the stock rom for this phone.
Please share link.
Thanks
Click to expand...
Click to collapse
I need too
Plus88 said:
I need too
Click to expand...
Click to collapse
Try this htcmania.com/showthread.php?p=20641051
I do this and working ! Cheers !!
Plus88 said:
Try this htcmania.com/showthread.php?p=20641051
I do this and working ! Cheers !!
Click to expand...
Click to collapse
Many thanks - it worked perfectly! :good:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
could you explain in more detail how you shorted the phone please iv bricked my v895n
alverchristopher said:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
Click to expand...
Click to collapse
peraoterangi said:
Click to expand...
Click to collapse
Hi,
What exactly is:
"Short the test point next to the sim card holder to ground"
dragontass said:
Many thanks - it worked perfectly! :good:
Click to expand...
Click to collapse
Can someone help I went on the link provided htcmedia and download the unbrick zip when I used suger flash tool it got stuck at 2 percent does anyone have password or can post steps on how you got to work thanks guys u da best
Should I put my phone in download mode when connected to sugar qct-sp when I press upgrade because I get to 2percent even after 15 mins didn't budge I hope someone can help
If you try to root with KingRoot, works. But follow the next steps:
-reboot your phone into recovery mod using POWER BUTTON + VOLUME UP BUTTON
-next select english using POWER BUTTON
-next select "WRITE PROTECT SWICH" and select "set write protect off"
-now reboot your phone and start the KingRoot and Root.
-Now your device is rooted.
I need a stock ROM so badly. I removed some system apps I don't use but now I can't update.
Here's the log:
nstalling zip file '@/cache/recovery/block.map'
Installing zip file '@/cache/recovery/block.map'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
sysutil: mmapped 19 ranges
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
sysutil: mmapped 19 ranges
Verifying current system...
failed to stat "/system/app/Calendar/Calendar.apk": No such file or directory
file "/system/app/Calendar/Calendar.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: "/system/app/Calendar/Calendar.apk" has unexpected contents.
"/system/app/Calendar/Calendar.apk" has unexpected contents.
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
Error installing zip file '@/cache/recovery/block.map'
alverchristopher said:
Useful information for anyone that cant get the phone to go to QDL mode
I tried the unbrck method above and could not get it to work as windows did not detect any com port.
after some mucking around i found if you cant get into QDL mode as needed you have to:
Open your phone. (have to unscrew phone)
Remove battery.
Connect usb cable.
Short the test point next to the sim card holder to ground.
Insert battery.
Windows detects phone.
Remove short from test point.
Proceed with unbrick
Hope this helps
Chris
Click to expand...
Click to collapse
What you mean "Short the test point next to the sim card holder to ground." Sorry, I not understand! Can you show a picture please!?
1st custom ROM for VF-895N: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/