[Q] Advice needed please - Galaxy S II Q&A, Help & Troubleshooting

I recently got a S2 gt-i9100 which was O2 uk branded.
I debranded it with I9100XXKL1_I9100OXAKL1 which went smoothly.
Ever since then this seems to be the only firmware the phone will accept.
I9100XXLPQ (Official Final Build) just hangs at the boot screen, I9100XWKJ1_I9100O2UKJ1 (the original o2 firmware) loops. and other firmwares do the same.
Is there a way around this, is it something I've done wrong.
Please, any help would be appreciated as I'm pulling my hair out with this thing.

Try do this with the official final build but i ain't sure if it is going to work out ..but its worth trying put ua phone into recovery mode & do a clean wipe / factory reset & wipe cache
Then reboot
This is how to put you Galaxy S II into Recovery Mode:
1. Turn off your Galaxy S II phone.
2. Now hold the Volume Up + Home + Power buttons of your Galaxy S2 smartphone until the Samsung logo comes up.
3. When you see the Samsung logo; quickly release the buttons for half a second and then hold them again.
Now your Galaxy S II will boot into its Recovery mode.
Use the volume keys to navigate and the home button to make your selection.

Just done that but Whilst I was there I noticed my csc code was KOR, so I have changed it to CPW. I'll see if that makes a difference.
Edit...
Still not installing ICS

Hasn't anyone else came across this peoblem before, or even have a clue what it could be

Related

S3 stuck in safe mode

My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Switch off your phone..
Press the power button..
Once you see the logo screen press and hold the left capacitive button..
Sent from my GT-I9300 using Tapatalk 2
zoot1 said:
Switch off your phone..
Press the power button..
Once you see the logo screen press and hold the left capacitive button..
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I already did that....still stuck in safe boot.
alphaola said:
I already did that....still stuck in safe boot.
Click to expand...
Click to collapse
I think its:
Switch off your phone..
Press the back or cancel(left) button..
Once you see the logo screen press and hold the left capacitive button..
Hey,
I'm having the exact same issue with my note 2. Wondering if you found a solution.
Anybody can help with this? I am having the same issue
use search, asked and answered too many times
I did search..
I tried everything.
full wipe, cache, dalvik, factory reset and it keeps saying safe mode.
so please help
EDIT:
i just installed slim rom, and it keeps saying safe mode...
s3 safe mode
one way work for me..
1-turn off the phone
2- remove battery
3- short + and - in battery connector for few minute
4-insert battery and turn it on
alphaola said:
My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Click to expand...
Click to collapse
It's Volume button work fine??
The problem has nothing to do with reboot. As you can see have already mentioned reboot as part of the solutions I tried.
My device is fine with ICS firmwares but has issues with Jellybean (stock and modded rom including CM10.1). Currently am running ICS on it as thats the only way the phone works properly.
I installed 4.0.4 (XAALF2) via Odin, but it got stuck on samsung logo. Then turned it off and flashed CWM to do factory reset as the volume key doesnt work on stock recovery. After that everything worked fine. I was able to update to the latest 4.0.4 via OTA.
The problem is hardware, so you might want to contact Samsung.
I found some information about "Safe Mode".
It seems that every Android phone has a safemode.
"On Samsung’s devices, almost all users will be able to access Safe Mode with by pressing and holding the menu button during start up. If it’s a capacitive menu key, make sure to release and press again each time the LED under the key comes back on. You don’t want to miss the catch for Safe Mode because the button released itself."
Here is the link where i get the information: http://www.tested.com/tech/android/...ds-safe-mode-to-save-a-phone-from-boot-loops/
You can try it this way, maybe it will work.
Good luck.
Ic3y83 said:
I found some information about "Safe Mode".
It seems that every Android phone has a safemode.
"On Samsung’s devices, almost all users will be able to access Safe Mode with by pressing and holding the menu button during start up. If it’s a capacitive menu key, make sure to release and press again each time the LED under the key comes back on. You don’t want to miss the catch for Safe Mode because the button released itself."
Here is the link where i get the information: http://www.tested.com/tech/android/...ds-safe-mode-to-save-a-phone-from-boot-loops/
You can try it this way, maybe it will work.
Good luck.
Click to expand...
Click to collapse
I think u missing the point, the phone works fine with 4.0.4 firrmwares, it only get stuck in safe mode when updated to Jellybean 4.1.1 and above. No amount of key combination, factory reset or even custom rom was able to fix the safe boot.
The best option is to send it back to samsung, its definitely hardware issue.
alphaola said:
I think u missing the point, the phone works fine with 4.0.4 firrmwares, it only get stuck in safe mode when updated to Jellybean 4.1.1 and above. No amount of key combination, factory reset or even custom rom was able to fix the safe boot.
The best option is to send it back to samsung, its definitely hardware issue.
Click to expand...
Click to collapse
I'am sorry for misunderstanding u. I think you could be right. Maybe it is a hardware issue.
Don't forget to "unroot" and reset the "flash counters".
Greetz.
alphaola said:
My galaxy s3 has been stuck in safe mode for two days now which is frustrating as only the stock apps can be used. I have tried different solutions, which I list below.
How it happened.
I was initially on 4.1.1 and when I woke up I saw a notification to upgrade to 4.1.2, after that it did its thing and rebooted into safe mode.
solutions tried
1. Reboot - didnt work
2. take out battery for few minutes and reboot - didnt work
3. boot into stock recovery to try to factory reset phone, Volume button not working so cant select other option apart from reboot. - didnt work
4. Download stock rom from samfirmware and flash using odin - didnt work
5. Flash CWM using odin, didnt factory reset and flashed custom rom (omega). It boots into safe mode as well
6. Downloaded stock ics firmware, flashed using odin . it boots but stuck on samsung logo.
I dont know what else to do. Although am thinking downgrade the bootloader to one meant for ICS the try to flash to ICS stock rom again, would try this later in the day.
p.s Ignore more signature I own a galaxy s3 as well.
Click to expand...
Click to collapse
i did a reboot and it removed the safe mode :good:
My personal experience, i overclocked my SGS3 with Boeffla kernel on ARHD then i got freeze screen and phone reebot into safe mode, I entered into recovery and reebot then everithing was fine again.
Safe mode occurs when something in the phone is not working properly , could be hardware or software, however, stuck on it is not a good signal.
my advice is to send the device to service.
Do not forget to reset flash counter via Triangle Away and flash stock factory firmware.
Good Luck! :good:
note 3 stuck in save mode window
This problem occurs after changing to a new simcard not already installed before in the device.
1. Power off the galaxy note 3.
2. Remove the micro simcard from the slot by sliding.
3. Power on the device without the simcard.
4. It will run in a normal mode, if so, this will actually diagnosed that there is a simcard defined by the administrator as default. In the security setting in setting menu and for protection against theft, the original simcard must be insert to unlock this choice of detection of any change in new simcard. New simcard is defined as strange and theft suspected.
I hope this make you reach some solution for your trouble.
S3 SAFE MODE issue
Plz help....
On my s3 i9300, its always on safe mode. Tried FACTORY DATA RESET. Still on safe mode. Other issue is that on power on and off, back LED turns on for few seconds. Also volume down not working. These issues started after s3 went on safe mode. Any sloution??
shoeb_v said:
Plz help....
On my s3 i9300, its always on safe mode. Tried FACTORY DATA RESET. Still on safe mode. Other issue is that on power on and off, back LED turns on for few seconds. Also volume down not working. These issues started after s3 went on safe mode. Any sloution??
Click to expand...
Click to collapse
Same issue here, it is hardware
I went through a lot of threads and not one had a solution. So I will post here what worked for me.
Customer came to my store with Galaxy S3 (SPH-L710T) that was stuck in safe mode. I tried everything on this thread, nothing worked. Luckily I had a older Galaxy S3 (SPH-L710) with a broken screen, so I switched over the motherboard from the customer's phone to the old one - I did connect the customer's original LCD to the motherboard since my old phone had its LCD broken. Powered it on, no safe mode.
So at this point I just transferred the volume buttons flex cable to the customer's phone. Powered it on, no safe mode again.
Hope it helps someone!

[Q] Could it be that i accidentally bricked my Samsung Galaxy s Advance I9070p

Hello my fellow people. I have a question.
I had factory reset my Samsung galaxy s advance i9070p and then wanted to root it from 2.3.6 gingerbread to 4.1.2 JB.
I used odin to root it but i used I9070XXLQ4_I9070SERLQ4_SER as the md5 file. With i used the original i9070p download package what had the tar file. The firmware my phone originally had was xxlk4 but instead of that i used xxlq4. But after rooting and odin saying pass i unplugged the phone and saw that it was at the black screen and nothing came up. I tried holding the power button down but nothing i tried going to download mode with holding the power, volume down button plus menu button, but still nothing.
Could it be that i had hard-bricked my phone?
When i plug it in to my PC it makes a double beep at first then after a second it does a single beep. But it doesn't show any connection signs.
If it's hard-bricked then is there any chance to get it back to life.
My Phone is: Samsung Galaxy S Advance I9070p 2.3.6 GB. Firmware is originally xxlk4.
Razor112 said:
Hello my fellow people. I have a question.
I had factory reset my Samsung galaxy s advance i9070p and then wanted to root it from 2.3.6 gingerbread to 4.1.2 JB.
I used odin to root it but i used I9070XXLQ4_I9070SERLQ4_SER as the md5 file. With i used the original i9070p download package what had the tar file. The firmware my phone originally had was xxlk4 but instead of that i used xxlq4. But after rooting and odin saying pass i unplugged the phone and saw that it was at the black screen and nothing came up. I tried holding the power button down but nothing i tried going to download mode with holding the power, volume down button plus menu button, but still nothing.
Could it be that i had hard-bricked my phone?
When i plug it in to my PC it makes a double beep at first then after a second it does a single beep. But it doesn't show any connection signs.
If it's hard-bricked then is there any chance to get it back to life.
My Phone is: Samsung Galaxy S Advance I9070p 2.3.6 GB. Firmware is originally xxlk4.
Click to expand...
Click to collapse
Something very similar just happened to me. I got a Samsung Galaxy S Advance from my company, but since I have another phone I decided to upgrade it to Jelly Bean 4.1.2 using odin to root it. Just like the poster above, oding said "PASS" but didn't reboot my phone. Not even a flicker on the screen, I see no activity that the phone is even charged or anything. The battery is charged, so I have no clue what could be wrong. What I've tried so far:
1)
Unplugged it and tried to boot it normally, didn't work.
2)
Took the battery hour for 1h+, boot normally, didn't work.
3)
Took the battery out for some time again, boot into download mode, didn't work.
4)
Take the battery out, put it in again. Hold down volume UP and volume DOWN simultaneously, power on. Didn't work -- NOTE! When the phone is plugged into my PC, the computer makes a noise that beep is being recognized as plugged into the computer, a second later it makes a beep indicating something was unplugged... nothing more happens.
Please help. I'm rather new to Android phones, and I would appreciate any assistance

Typical First Post - sorry

Right, to cut a lonnnnng first post story short, basically, rooted my phone yesterday, went well, installed some rooted apps and was having fun, one app, 3D something, from Google Play. it asked me to restart my phone after setting superuser (i thought this was quite weird) anyway i boot locked my phone - got the typical "Samsung GALAXY Note GT-N7000" and the phone woundnt move from there, i can gt into vol+ home and power and vol- home and power still. so after some research i found i had to flash therelivant stock ROM using odin - so i did. and it worked. then at somepoint today my phone got stuck in a boot loop consisting of the GT-N7000 screen then the samsung spash screen. when i do vol+ home power, i get in red text "E:/error%20in%20/data/recovery_last_kernal_log.txt" - what does this mean? and how(if at all) do i fix it?
i have curently re-flashed stock ROM and vol+ home power & "wipedata/factory reset" and so far so good......
any help or shed light would be a great help
Phone is Samsung GALAXY Note GT-N7000

[Q] s3 doesnt reboot after the 4.3 upgrade on the unlocked phone

s3 doesn't reboot after the 4.3 upgrade on the unlocked phone
Hi All,
Today, i updated my new unlocked Samsung galaxy s3 gt-9300 from JellyBean 4.1.2. to Official JellyBean 4.3 using below mentioned file
I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5
After successful upgrade using the odin 3.07, the phone didn't reboot automatically. Instead, keeps on blinking the initial screen "Samsung galaxy s3 GT9300"
Please suggest me some ideas on how to resolve this issue, thanks
regards,
sanmani
sanmani said:
s3 doesn't reboot after the 4.3 upgrade on the unlocked phone
Hi All,
Today, i updated my new unlocked Samsung galaxy s3 gt-9300 from JellyBean 4.1.2. to Official JellyBean 4.3 using below mentioned file
I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5
After successful upgrade using the odin 3.07, the phone didn't reboot automatically. Instead, keeps on blinking the initial screen "Samsung galaxy s3 GT9300"
Please suggest me some ideas on how to resolve this issue, thanks
regards,
sanmani
Click to expand...
Click to collapse
Probably just need to do a factory reset. It's not uncommon to need to do that after an update, even when successful, because the Odin flash does not wipe data (unless otherwise noted).
es0tericcha0s said:
Probably just need to do a factory reset. It's not uncommon to need to do that after an update, even when successful, because the Odin flash does not wipe data (unless otherwise noted).
Click to expand...
Click to collapse
Please let me know the steps to factory reset the phone, since the phone is not booting and i cant do literally anything(not even able to switch off the phone)
Pull the battery. Then pop it back in. Reboot by holding Vol Up + Home + Power and release when you see the blue letters at the top left about entering recovery. Volume buttons should navigate and I think Power selects or Home if it isn't Power. Haven't used the stock 3e recovery in awhile.
es0tericcha0s said:
Pull the battery. Then pop it back in. Reboot by holding Vol Up + Home + Power and release when you see the blue letters at the top left about entering recovery. Volume buttons should navigate and I think Power selects or Home if it isn't Power. Haven't used the stock 3e recovery in awhile.
Click to expand...
Click to collapse
Thanks for the reply,
As you suggested i did the recovery mode method, but it doesnt work.
Seems to be bootlooping. please suggest the methods to resolve the boot loop issue

S3 9300 stuck boot screen no recovery mode access

Hi everyone.
My case is similar to this one: http://forum.xda-developers.com/galaxy-s3/help/i9300-wont-boot-recovery-mode-isnt-t2993235
- Only that me cellphone has never been rooted or flashed.
It happened two days ago, I sent a message through WhastApp, close it, open up the radio, I plugged the headphones, and in that precise moment there was an "updating" notification message, then everything went black and it reboot, getting stuck in the "Samsung Galaxy S3 - GT-I9300" screen.
I have tried:
- Stuck Power button solution -> Not worked.
- Disassembler the cellphone to clean the Power button -> Not worked.
- Trying to get to Recovery mode (Volume Up + Home + Power buttons pressed)-> Not possible to get into that stage.
- The cellphone is not recognize by Window 7 SP1 with latest USB drivers for Samsung phones as USB Flash storage device.
I would like to have my photos/images back because they hold a great emotional value. In simply words, I need to save the my user data from the phone.
So, I have some questions:
- Can I get/save my data back by flashing the cellphone?
- I read I can flash a recovery partition through or with Odin, would this erase the data I want to backup?
Well, anyone who want to give me advice and some guide here, let me thank you before hand and I'm ready to listen I try whatever comes your mind, just point me out what do I have to read or do.
:highfive:

Categories

Resources