[Q] Galaxy S2 - Unknown USB Device - Device Not recognized - Galaxy S II Q&A, Help & Troubleshooting

Disclaimer:
I've searched all over the forum and found few close to my problem but this seems different
Background:
I recently flashed my Galaxy S2 International version with CM9 nightly build. Since then, when I turn off the phone and put it for charging, the battery charging animation stays like that till the phone is fully charged unlike the stock ROM where that animation disappears after some time.
Simultaneously I've noticed something else, when my phone is plugged to USB cable attached to my computer, a pop up appears at the bottom right (notification area) which says "USB Device not recognized" and in Device Manager it's listed as "Unknown Device"
I ignored it thinking that it might be an issue with the CM9 Build as it's not fully functional. I've had the phone that way for around 10 days.
Recently I thought of switching to XXLPQ(Official ICS Update) and I got into Download Mode but Odin doesn't see the phone. No "communication" establishing between phone and computer.
I also had CM7.1 on SD Card and I thought flashing that old CM might bring my USB functionality back.
So got into ClockWork Mod Recovery and flashed it. Flash was successful. But now phone is in boot loop with "Samsung Galaxy S2" with an exclamation.
If I try to press and hold the power button, it comes back to that battery charging screen even though phone is not plugged to either USB or charger.
I can get into download mode(Odin can't see the phone) but not into Recovery Mode.
Three things that I see as of now on my phone are the boot loop I mentioned above or Download Mode (but not recognized by Odin) or Battery Charging animation.
I'm sure there's nothing wrong with USB Cables or Drivers or Kies or anything else. Because my brother's S2 works just fine which is on "Stock ROM".
I need help. I'm sure that CM9 nightly broke that basic USB Device functions on the phone.
Please let me know if there is any alternative for recovering my S2. I know that the worst is, it goes to Repair Center.
But I hate to give up on this!!
Are there any other tools or recovery softwares which can be used to re-flash the phone other than Odin no matter what screwed up state the phone is in!?

Deleted - sorry, hadn't read your post properly.

firstly i want to ask does your phone charges? if it does it sounds like u dont have development option enabled.. or ur usb port is broken.. if it doesnt charges then im pretty sure ur usb port is broken...
about the recovery.. can u use ur SD card on ur brother's SG2 and put stock rom into it? and then insert it into ur SG2 and try flashing it throught CWM

warrez said:
firstly i want to ask does your phone charges? if it does it sounds like u dont have development option enabled.. or ur usb port is broken.. if it doesnt charges then im pretty sure ur usb port is broken...
about the recovery.. can u use ur SD card on ur brother's SG2 and put stock rom into it? and then insert it into ur SG2 and try flashing it throught CWM
Click to expand...
Click to collapse
Thanks for the response Warrez!
- Phone charges (but that battery charging logo stays like that)
- When I flashed CM9 nightly I'm sure I haven't checked or played with Development option (It's not enabled)
- And last, I'm not able to get into Recovery Mode as well (already mentioned above)
Any other inputs!?

I have the EXACT same problem

Me too exact same problem .
I've confirmed my setup is fine as it works with Odin for my tab 7.7
Exact same issue, stuck at Samsung logo with exclamation mark. Can't get into recovery, can get into download but computer says device not recognised .
I was running Slim ics at the time then about to switch to cm9 and siyah kernel

crunchie-uk said:
Me too exact same problem .
I've confirmed my setup is fine as it works with Odin for my tab 7.7
Exact same issue, stuck at Samsung logo with exclamation mark. Can't get into recovery, can get into download but computer says device not recognised .
I was running Slim ics at the time then about to switch to cm9 and siyah kernel
Click to expand...
Click to collapse
I was using Siyah kernel too. hmmm

It doesnt look good

crunchie-uk said:
Me too exact same problem .
I've confirmed my setup is fine as it works with Odin for my tab 7.7
Exact same issue, stuck at Samsung logo with exclamation mark. Can't get into recovery, can get into download but computer says device not recognized .
I was running Slim ics at the time then about to switch to cm9 and siyah kernel
Click to expand...
Click to collapse
Well.. I made some progress in last few days! I've taken out the battery and got into Download Mode. I was holding buttons and my brother inserted the battery. What I did was I powered of the system and connected the phone while it was in "Download Mode". I waited for some time.. Say more than 3-4 mins.
Rebooted my PC and once it's back it wasn't saying anything. For my surprise I see the "Yellow COM" established in Modem. Without delay I grabbed recovery ROM which is posted in one of the sticky threads. Flashed the phone.
Now, it got little interesting! When the phone is booted back post flashing it shows that "MTP Device" even though USB Cable isn't plugged into it!
When I turn off the phone, it either reboots back without hesitation or ends up at "big green battery charging" animation!
To get back into OS, I have to get into recovery mode and then I use "Reboot System"!
And that "USB Device malfunctioned or not recognized" thing is intermittent.
At times it says that and at times it establishes "COM connection" in Odin.
I re-flashed old bootloader thinking that it might be a phone's basic operating driver issue. But that didn't solve the issue!
I've even flashed latest stock European ICS Firmware.
And with ICS, things got even more interesting!
It started throwing up new message "Charging Paused due to over voltage"
What I'm sure of is.. It's definitely got to do with CM9 ICS. Because when I was on beta official ICS before I switched to CM9 Nightly phone was working like a charm! As soon as I flashed CM9 Nightly, I started getting that "USB Device Not recognized" issue with the battery irregularities.
I wasn't sure how I could get the phone recognized in Odin. Hastily I flashed CM7.1 on CM9 compatible ClockWorkMod Recovery enabled Kernel. That is when the problem got more complicated!!

I'm about to give up and pay someone to fix it via Jtag.
I've tried several computers, several cables , multiple reboots and everything else.
Windows just still says usb device not recognized so the phone must be corrupted somewhere.

Please change ur USB cable, i had this problem n its only frm the cable.

I don't believe this.........
I had tried two other cables ( a nokia usb>micro usb and another one ) as i had lost my samsung usb>micro usb lead and both those said unrecognised device....
I had just given up, ordered a jtag repair and then my old dear finds the samsung cable!!!!
Bizarely it now recognises the phone.

Hi Guys
I am having the exact same problem and am still looking for a solution.
My phone is not recognised by the PC after installing CM9 Nightly and now I am stuck until I can get the device driver installed again so that I can use Odin.
I am using the official Samsung USB cable which worked fine until the CM9 flash.
I am assuming this is a common problem so am hoping that somebody can supply a fix asap.
Any help will be appreciated
Ta

I had the almost the same problem .. I took it to the place I bought from .. and fix it .. they told me it was a hardware problem ( I remember with the hard disk .. I forgot )

The same thing, after using the Custom ICS LPQ roms!!
Now there's no way i can't use Odin to flash official rom!

Hey Guys
Check the link
http://forum.cyanogenmod.com/topic/44994-cm9-20120320-usb-mtp-device-not-installing/
Fingers crossed
---------- Post added at 02:37 PM ---------- Previous post was at 02:33 PM ----------
Has worked for me

lenny74 said:
Hey Guys
Check the link
http://forum.cyanogenmod.com/topic/44994-cm9-20120320-usb-mtp-device-not-installing/
Fingers crossed
---------- Post added at 02:37 PM ---------- Previous post was at 02:33 PM ----------
Has worked for me
Click to expand...
Click to collapse
Finger crossed
Sent from my SGH-I897 using XDA

crunchie-uk said:
I'm about to give up and pay someone to fix it via Jtag.
I've tried several computers, several cables , multiple reboots and everything else.
Windows just still says usb device not recognized so the phone must be corrupted somewhere.
Click to expand...
Click to collapse
Last time I checked.. My phone is getting detected in Odin. But not always! Every 5 attempts it sure is seen by Odin 2-3 times. And it's on ICS 4.0.3 XXLPQ with "Charging Paused high voltage detected" message even though it's not plugged to charger or USB Cable.
My brother advised me to leave the phone that way and wait till it goes dead and then keep it dead for at least a week and then try charging it fresh with phone's stock charger. Now 5 days passed and I'm waiting for another 2 days to try this out!
Cheers,
A.

lenny74 said:
Hi Guys
I am having the exact same problem and am still looking for a solution.
My phone is not recognised by the PC after installing CM9 Nightly and now I am stuck until I can get the device driver installed again so that I can use Odin.
I am using the official Samsung USB cable which worked fine until the CM9 flash.
I am assuming this is a common problem so am hoping that somebody can supply a fix asap.
Any help will be appreciated
Ta
Click to expand...
Click to collapse
Gee.. Try this! Take the battery out of the phone and press the power button for few secs with the battery out. Take someones help to put the battery back while you are holding the download mode button combination.
When you get into download mode, leave the phone that way and do not plug it to the USB Cable. Power off the PC and wait of 3 mins. Now connect the phone to the USB Cable while the PC is still off and phone is in Download mode.
Turn the PC on and wait for till it reaches desktop and then give it 3-4 mins. Now launch Odin. If you have any luck you should see that "yellow COM"!
The same procedure worked for me! If you happen to see that "yellow COM" on Odin don't delay anymore. Just flash any stock ROM. 2.3.6 or 4.0.3!
P.S.
Odin may not see the phone on the first attempt. If so.. Repeat the steps for 2-3 times
All the best!
Cheers,
A.

MAJED.y said:
The same thing, after using the Custom ICS LPQ roms!!
Now there's no way i can't use Odin to flash official rom!
Click to expand...
Click to collapse
You could try the same instructions that I posted to lenny74!
Cheers,
A.

Related

HELP - Odin and kies won't detect my phone !

Here's the thing guys: a week ago i was at a bar whith some friends and one of them spilled a glass of beer on my phone.I queckly removed the beer from it,removed the battery,sim card and sd card and left it for 1 hour to dry.After that i put the battery back and turn it on.The soft just wen't crazy so i decided to go in CWM and flash the soft back and everything was working fine.During the night i left the battery and the sim out of the phone.In the morning after i used an hair-dryer to be sure that there was no liqued in it, i decided to charge my phone.All wen't well untill i unpluged it and got the a message saing : battery still charging.I pluged it back and left the phone there for 4 hours.Again the same problem.I restarted the phone and wiped battery status,still no efect.After this i decided to flash the stock firmware.I put the phone in downloade mode and connected to my laptop.First odin added the device,the removed it then added it again.After that i put the 3 files and hit flash,but the an error appeared: odin removed it again and windows 7 gaved my this message: usb not recognized.i tried every metode on the internet.No effect.Now odin and kies wont see it.
I've installed the drivers again and again.I am abble to enter downloade mode,but as i said odin wont see it.When i turn on the phone,i get this message: firmware upgrade encounted an issue.please select recovery mode in kies and try again.
I know that this is a soft brick problem,not a hard brick problem,because previosuly i had hard brick and repaired it with JTAG at a local service.
Before this problem appeared,i was using Rootbox Rom.
Please help me.I'm begging you.!
p.s: should i try to reinstall my windows ? and sorry for any grammar mistakes.
You need to clean up your device, usb por at least. 99% alcohol should do the trick.
Formatting win7 or clean samsung drivers & kies uninstall should do it too.
This is trial & error, you can always use that guy who spilled the beer's laptop
Sent from the little guy
Your USB-Port is wrong. you should clean this up and also the whole phone as posted before. All this problems are caused by the USB-Port...
Disassemble it and clean it with q-tips and isopropyl alcohol,
Sent from my GT-I9100 using xda premium
Isopropyl is tha sh*t
Sent from the little guy
gastonw said:
Isopropyl is tha sh*t
Sent from the little guy
Click to expand...
Click to collapse
OK guys.Il come buck with a post to anounce you if i fixed the phone.One more thing: should i install Kies or download only the drivers provided on xda by daerragh or Faryaab [ the link by daerragh if for version v1.5.20.0 (latest as of 26th February 2013) and by Faryaab is v1.5.5.0 (10-06-2012)] ?
p.s: i have allready reinstalled my windows 7 ultimate and updated it to latest version.
Moral:
Do not drink......
Do the kies thing, bulletproof.
Sent from the little guy
I'm buck guys: i did wthat you told me,but no effect.I have cleaned my phone from top to buttom and my laptops usb.I have installed Kies.But no effect.When i connect the phone is says usb not recognized and unknown device.Any other solutions ? please help me.
Try another usb port / cable / pc.
And reinstall kies.
Sent from the little guy
Consult him and make him pay for a galaxy s4 ;p.
Sent from my GT-I9100 using xda app-developers app
Allready tried that.Same problem.
Ummmmmm...sneaky little device, is it charging at least?
If not, usb is completly busted.
Anyways, if it does charge doesn't actually mean your pc will see it, are you using s2's genuine cable? Does your pc sees ANY DEVICE CONNECTED at all? An a unknown device at least?
Sent from the little guy
I eventualy figuared out that my usb was broken, so i send it to a friend who works at samsung service.the repair cost 30 dollars.He told me that i was lucky,because at first he tought that the motherboard was damaged,but it wasn't.Now i have my phone and i recenty installed neatrom lite v4.4 and i have some problems:
1.When i lock the phone,my lockscreen won't appear ? how can i fix that ? i tried from setting,but nothing.
2.Should i install Siyah/Dorimanx or just stay whith the stock kernel ? i don't want my phone to have overheating problems,stability problems etc.I'm not a fan of OC,i just want the phone to move faster and that it won't get stuck,freeze,laggy.
3.How can i install those addons ? i'm interested in the aosp lockscreen with shortcuts and weather info,keyboard aosp,to have the circle battery note gallery and some camera options.thats all
4.How can i add more icons in the notification center ?
5.When i hold the powerbutton,the phone shuts done.Why is that ? I don't have the 4 options that were with the stock version(airplaine mode,data enabler,silent profile and power off).How can i have these back ?
Once again guys,thank you very much for your help.
i am having issue with samsung kies. odin recognizes my phone but kies wont why it is happening so?????
samundra sen said:
i am having issue with samsung kies. odin recognizes my phone but kies wont why it is happening so?????
Click to expand...
Click to collapse
You have problem with drivers. Make clean reinstall the drivers and it should be fine.

S3 Bricked [Soft?]

Hello all, I have a GS3 international GT-I9300
I'll try to go through the story as fast as I can and give as much detail so you guys can understand how I got here.
Bought the phone unlocked, I was stock, I rooted and then I decided to install a new ROM. I went with Resurrection Remix, it was working great. I did this on a desktop back home. They released a new update to RR so I did a OTA update with "Update Me" apparently the thing flashed but it didn't, the phone still worked but NFC wasn't working as well as having lost root access and some other stuff wasn't working correctly, but I lived with it.
I moved to Florida (home is in NY) and I have a laptop with me, for some reason my laptop used to be able to transfer files to my S3, but it wasn't doing it any more after a while. So it would just charge it. I was in a hotel room last week trying to tether via USB but the PC wasnt having it, it could not locate the phone. This week I moved to a different hotel with internet and decided I would flash stock on my S3 to get rid of all these bugs and get root again, I tried flashing stock through recovery and it wasn't going, so I tried flashing RR again (this time downloaded from the site RR site) and it worked. Still no USB connection but I had root back. I looked around my PC and apparently the Samsung drives are not installing or something on my PC. I installed Kies, but nothing, I tried a stand alone driver install and nothing, so I just gave up and bought Mobile Odin pro from Gplay to try to flash again.
Mobile Odin for some reason (I blame it on myself) wasn't finding/flashing stock so again I decided to try and flash RR and see what would happen. It flashed RR and turned on fine. Then I just decided to look for an NFC fix on XDA. Once I found my NFC fix (http://forum.xda-developers.com/showpost.php?p=32029713&postcount=8367) I decided to just copy the files to the system folder, NFC still not working, rebooted and NFC still no working, so I figured I would try to flash the fix through mobile odin seeing as how I can't get my PC to pick up on the USB. I tried flashing but MO just kept bouncing it back and re-booting into RR. Tried again and no flash. So I decided to again try and flash stock. I tried going into Recovery, the phone shut off like it always does, came back on but stayed in the Galaxy S3 GT-I9300 logo and would not move. I shut it off again, tried turning it on again and still stuck on the galaxy logo. Now, if I leave the phone off and plug in the USB, it won't show the battery charging image, it will actually turn straight onto the galaxy logo again and stay there. I can get the phone into download mode, but like I said my pc won't recognize the drivers.
Now, here are my questions:
What happened?
Can this be fixed?
Am I an idiot?
If I can get the drivers installed on another PC as well as Odin (1.85), will the new PC "see" the S3 or are the drivers on the phone deleted as well? (if that sort of thing can happen, idk.)
I'm going to see if I can borrow a buddy's PC and download the drivers as well as odin to try and bring my S3 back to life, I just want to know, what happens if I can't get the other PC to pick it up ether because the drivers on the phone are deleted (if that's a thing) or what I can expect if it is connected.
What are the steps or guides to follow here? I just got it into Download mode and it says on the top of the screen:
ODIN MODE
Product name: GT-I9300
Custom Binary Download: Yes (2 counts)
Current Binary: Custom
System Status: Custom
sorry , i am sometime getting headache reading long english text so i just briefly look over.
your PC doesn't recognize your S3 ? is that correct ? hmmm , is it possible that your PC (Microsoft Windows I assume?) system is damaged due to something like virus or some reasons ? i have encountered that kinda problem before and be OK after i reinstalled the system.
If it's a soft brick, then it can defiantly be fixed. You might, however, lose your data along the process.
Be glad it's not hard bricked
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
djembey said:
It happened to me many times, USB error "unknown device" connected. Only fix for it was reinstalling Windows so better if you can use different PC or laptop. Install Kies and other USB drivers. Restart computer, download and run Odin v 3.0x. Flash your phone.
If this doesn't work then maybe your phone have a problem with USB port?
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Don't forget to delete kies as you only need the drivers
Sent from my GT-I9300 using Tapatalk 2
Thanks for the replies guys. I'll try to fix tit today, I didn't get a chance to do it last night. If anything I'll update you guys with what's going on.
Like I was saying, I'll try using a different PC to fix it. Now, if I can't get Odin to recognize the phone, what would be the next step?

[Q] Battery problem and connect to pc problem

Hello,
I have a very big problem with my Samsung Galaxy S3 I9300.
The problem started when my battery ran down very very fast. I can use my phone for no longer than maybe 6 hours, and that is in stand by. If I want to charge my phone till it's completely full it might take two days on the charger as well, even when my phone is off. I tried to reset my phone to factory defaults, but that didn't fix the problem. I even bought a new battery, hoping that would solve the problem, but even no luck with that. The phone also becomes hot in the bottom. Now I wanted to bring it back to the store for warrenty but there lies the next problem, my phone is rooted.
I know it is possible to unroot the phone, and it's nog too hard to do. But every time I connect my phone with USB to my computer, my computer doesn't recognize it. I get the next error message "USB device not recognized". I tried different cables, I tried on an other computer, but still I get the same error. I also tried the S3 of a friend on my computer and with his phone I do get a connection. So I know there is nothing wrong with the drivers on my computer or something like that. There must be something wrong with my phone.
Now the problems won't stop here because there is even a third problem. Like I said before I have rooted my phone, but I can't use SuperUser. When I start SuperUser it says "The SU Binary needs to be updated. Continue?". Then when I press continue I get the message "Installation failed !". I can't use CWM as well. I wanted to use Triangle Away before bringing it back for warrenty, but I can't use it because I can't use SuperUser.
If some one would have an idea to unroot my phone without using USB so I can bring it in for warrenty. Or find a way to get my USB port running again, I think that would fix my problems.
I spend a few hours trying to fix these problems, but now I've come to a point I don't know what to do anymore, I hope anyone of you is willing to help me. I'll be for ever gratefull.
Grtz Nathan...
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Mord0rr said:
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Click to expand...
Click to collapse
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
droogje said:
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
Click to expand...
Click to collapse
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Mord0rr said:
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Click to expand...
Click to collapse
What exactly do you mean with hard reset? If you mean powering on with home button and volume up button pushed, and then select "wipe data/factory reset". Then yes, I tried that.
In setup I did check USB debugging. The thing is, when I power on with home button and volume down button, I enter download mode. But even in download mode my computer does not recognize my phone. I'm not sure, but I think the computer should.
I'm really stuck here :crying:

Phone not detected by windows 7 help!

Hi guys,
I'm new to this forum. I've got a Samsung i777 on android 2.3.6 kernel 2.6.35.7 build number gingerbread.uckk6
I've recently bought this phone off ebay
My phone does not get detected by windows 7 or Macbook. I've tried changing the USB flex cable with I9100 v2.3 but still no luck.
When I connect USB port it beeps and shows mtp-initialization/mtp-connected on the phone but it is not shown on windows. It says USB cannot recognise the device. I've got a s3 and ideos x3 both of them are detected.
I've installed kies 3 on my laptop.
I had to swtich off the wifi on the phone because it consumes a lot of battery, I think it is because of the android version I'm using!
I want to root the phone and unlock it!!
Any help is appreciated!
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I'm guessing the problem is the Samsung drivers you have installed for the s3. Try uninstalling those and installing the correct drivers for s2.
Sent from my GT-p511x
you can check this thread for driver
http://forum.xda-developers.com/showthread.php?t=961956
You most likely need a new cable. Happened to me once! Could be the drivers but I HIGHLY recommend just trying a new USB cable.
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
kshah1606 said:
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
Click to expand...
Click to collapse
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
You could also download an app that allows you to enter download mode.
SighIsAnonymous said:
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
Click to expand...
Click to collapse
How would I be able to change the ROM if the phone is not detected
jpasher said:
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
Click to expand...
Click to collapse
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Yes I guess this rom is useless, if the wifi is switched on then battery would not even last 6 hrs!
kshah1606 said:
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Click to expand...
Click to collapse
Are you saying to get a balloon notification in the tray that says the USB device is not recognized? A possible reason for that is a faulty USB cable or USB port (funny enough, I actually got that message last night when I was playing around with my Captivate, and switching USB ports made it work). I know you said you've tried other computers an another USB cable, but that's about my only idea. Maybe there's some debris inside the connector that's messing up the connection.
When you say you changed the "USB flex cable", are you talking about the internal connector and board inside the phone? If so, perhaps the I777 connector board is actually a little different than the I9100 board and causing a compatibility issue.
The bug in UCKK6 related to wifi didn't affect everybody, but it definitely affected a lot of people (based upon reports here).
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
If you have an SD card, you can download another ROM on that SD card from your computer and then you can install custom recovery (CWM) and then install the ROM from SD card.
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
First ill run you through the problem I had. Just for reference did you use Mr. Cooks script before flashing Cyanogenmod 11? One of his scripts for cleaning before flashing, actually deletes a certain file, not to keen on which one. What it results in though is not being able to flash OF ROMS and some certain custom ROMS! So id recommend alliance's ROM! As for the "Getting the ROM on your device, you could put the ROM on your SD though recovery "Mount and storage/Mount mass storage/" or just use a micro sd card adapter and move it on there that way.
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Your help is appreciated
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
kshah1606 said:
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Click to expand...
Click to collapse
What state is your phone currently in? Is it still not detected by the computer? You are still on 2.3.6, correct?
If it's still not being detected by your computer, I'm not sure if you can flash anything needed using the stock recovery. I know that when I flashed stock JB, I was able to boot into stock recovery and directly apply the standard CWM update file here. It will give boot into a temporary CWM that should allow you to flash other ZIP files (like a ROM), although I had trouble doing that (so I ended up flashing the AJK_v4.9_NoSwap.zip kernel using the MobileOdin android app, which gave a permanent CWM recovery).
I'm not sure if this same process works with the 2.3.6 recovery. However, in order to get the stock recovery to see the internal SD card, I had to run adb shell commands to mount the partition (meaning I had to have a working connection from the computer).
Solved!!!
HI Guys,
Many many thanks for all your responses!
I have changed the USB flex cable again to an older version v2.2 and my phone is currently being detected by kies! So relieved thanks a lot for all your help..now the rooting begins!!:laugh:

[Q] S3 Stuck on samsung logo after attempted update to 4.3

I have an unrooted Samsung S3, i just received yesterday the notification of the jelly bean 4.3 update (originally ran on 4.1.2) so i went for it OTA via wifi, long story short, after download was finished and the phone automatically rebooted itself, it got stuck on samsung logo, i have waited for hours beside it (since i have modest experience about this) and finally nothing happened, so i started researching the issue, i have tried wipe data/factory resetting (didn't work) along with wipe cache partition, and no use, i have tried kies emergency firmware upgrade and initialization, but it can't see the phone in Download mode, i tried flashing the phone with Odin307 but it also cannot see my phone in Download mode, and i have heard that if the phones usb debugging was active, the phone would be seen, but i never used it, my phone was stock all the way, please help me get my phone working again.
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
andrewwright said:
Make sure kies is completely shut down and retry. You could also try reinstalling driver's and Odin and different USB lead or different PC/laptop
Click to expand...
Click to collapse
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
herculese911 said:
actually i have done all of that, i ran odin while kies was completely shut down (killed all kies from task manager) and downloaded latest drivers from samsung and installed them, tried 3 different wires on 2 different PCS, still my phone cannot be seen inside odin or kies
that is why i'm frustrated
is it possible to use the option "apply update from external storage" from system recovery menu? since my phone cannot be seen by any software, and if possible to use that option, what are the files that i should add to my MicroSD Card? and from where should i download them?
Click to expand...
Click to collapse
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Brownpanda said:
i guess problem is in charging port than , try fixing charging port , have you checked if you can see your device in device manager ???
Click to expand...
Click to collapse
before the update, the charging port worked just fine, the phone was recognized in windows in device manager, and inside KIES, now both of them can't see it, so how could it be faulty?
and for the record guys, i'm not lazy, i never post a thread until i have exhausted all other researching methods
boomboomer said:
In download mode is the product name blank?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
no its not, showing GT-I9300
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Try ODIN v1.85. It always worked fine for me, other versions don't.
Here is a compatibility list for what is worth it.
Brownpanda said:
please check in device manager if you can see your device , try reinstalling the device drivers, try different cable or it could be charging port .. Good luck ..
Click to expand...
Click to collapse
Can you get into recovery still??
boomboomer said:
In that case try a different pc, lead, version of odin. Either your problem is with the pc (most common) or your bootloader is corrupt, which is very unusual and difficult to fix.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
herculese911 said:
Thank you so much for your suggestions, but actually none of the above, i have done the fix that i was asking about (recovering from external card), its a twisted fix but it worked for eventually, i have added the Android 4.3 file (1.43 GB) to my Micro SD Card, and started recovery mode, and went for that option, the device started reading it, and then restarted itself but still stuck on samsung logo, but what i have noticed is that this time when i hooked up my phone to pc, the sweet sound of discovering my phone played, so i know that now i could use odin or even kies, so i went for odin, it recognized the phone, flashed it with the version i downloaded, and it worked. what a relieve
thanks to all of you guys for your help, i hope that this thread would help someone else who hit a dead end.
Best Regards,
herculese911
Click to expand...
Click to collapse
Thanks for sharing your experience
Hey, i have the same issue.
Can you please link me to the recovery from external sd??
Thanks.
Shahar.

Categories

Resources