Check it out =)
http://www.androidpolice.com/2012/0...id-4-0-build-3-11-605-22-for-the-htc-rezound/
Ronn Plae said:
Check it out =)
http://www.androidpolice.com/2012/0...id-4-0-build-3-11-605-22-for-the-htc-rezound/
Click to expand...
Click to collapse
I'm looking now. Thanks for the heads up!
You have to be locked to flash the radios right? Im still on the GB radio. Im iffy about flashing leaked radios.
mighty_markus12 said:
You have to be locked to flash the radios right? Im still on the GB radio. Im iffy about flashing leaked radios.
Click to expand...
Click to collapse
Yes, until we get s-off.
already posted
Can we undo the HTC Dev Unlocker, install the stock, install the leak, and do the HTC Dev Unlock again?
MisfitsTimmy said:
Can we undo the HTC Dev Unlocker, install the stock, install the leak, and do the HTC Dev Unlock again?
Click to expand...
Click to collapse
Yes. See the other post for download and instructions
Just a warning guys, it updates your h-boot AGAIN. This time to 2.21
Sent from my ADR6425LVW using XDA
i dont think the radio is updated based on the ss's of about phone, same as what i have now
downloading,thanks.
nghtmr3 said:
i dont think the radio is updated based on the ss's of about phone, same as what i have now
Click to expand...
Click to collapse
That's what I was thinking.
Sent from my ADR6425LVW using Tapatalk
It does update the radio. You need to relock bootloader then flash.
Sent from my Incredible, faster than a Thunderbolt, Rezound
md5s are different in radio and mdm9k images,for whatever thats worth
has anyone that ran the full RUU and unlocked tried to re-install an older gingerbread or ICS custom rom? if so did it work,or are you now "stuck" on this leak?
not being quite sure if i wanted to run the whole thing,i flashed the boot and system images and the phone is unusable because of the bootloops
im thinking the factory images are not happy with the 2.01.605.11 firmware so im wondering now if once you install the new hboot,radio,etc, if the older custom roms do not work
scotty1223 said:
md5s are different in radio and mdm9k images,for whatever thats worth
has anyone that ran the full RUU and unlocked tried to re-install an older gingerbread or ICS custom rom? if so did it work,or are you now "stuck" on this leak?
not being quite sure if i wanted to run the whole thing,i flashed the boot and system images and the phone is unusable because of the bootloops
im thinking the factory images are not happy with the 2.01.605.11 firmware so im wondering now if once you install the new hboot,radio,etc, if the older custom roms do not work
Click to expand...
Click to collapse
Yes, the older custom roms will not work well with the new firmware. They run fine, but in my case you suddenly didn't have access to your external SD card . Some have lost both cards . Restoring with Scott's rom fixed this for some, I had made a backup of the stock RUU rom so just flashed back and all was good again. Then I flashed Scott's rom. Sounds like something changed with either the mounting points or the mmcc dev block on the new firmware.
scotty1223 said:
md5s are different in radio and mdm9k images,for whatever thats worth
has anyone that ran the full RUU and unlocked tried to re-install an older gingerbread or ICS custom rom? if so did it work,or are you now "stuck" on this leak?
not being quite sure if i wanted to run the whole thing,i flashed the boot and system images and the phone is unusable because of the bootloops
im thinking the factory images are not happy with the 2.01.605.11 firmware so im wondering now if once you install the new hboot,radio,etc, if the older custom roms do not work
Click to expand...
Click to collapse
From my understanding the new firmware doesn't play nice with the older roms. I'm very leery of running the ruu myself. What if the actual release uses the old hboot? Is that even possible?
sent from ics land
its possible that the official OTA may contain a different hboot,but not likely the old one. they have obviously changed some things that would ahve to be re-engineered to work with the old hboot,and their wouldnt really be a point. as much as it seems like a possibility i doubt theyd go to the trouble of releasing a leak just to eff with us
if it contains something different,it would be newer,like 2.22+. but im pretty sure the 2.21 will be the release hboot.
im not sure i want to upgrade yet,either,tho i beieve with the evo3d method we will be able to donwgrade if needed.
my main issue is that i still want to be able to use these older roms,at least long enuff everyone has updated their base and made the old version obsolete. i dont really care about getting back to gingerbread,but without s-off i think its best not to rush into anything.
grrr this whole s-on thing really ticks me off on my thunderbolt or sensation id just run the RUU and not care,as i could always go back to old firmware
scotty1223 said:
grrr this whole s-on thing really ticks me off on my thunderbolt or sensation id just run the RUU and not care,as i could always go back to old firmware
Click to expand...
Click to collapse
I hear you, I want to do this so badly but I'm leery of not being able to go back if something went down with my phone and I had to take it in. Talk about itchy trigger finger.
scotty1223 said:
its possible that the official OTA may contain a different hboot,but not likely the old one. they have obviously changed some things that would ahve to be re-engineered to work with the old hboot,and their wouldnt really be a point. as much as it seems like a possibility i doubt theyd go to the trouble of releasing a leak just to eff with us
if it contains something different,it would be newer,like 2.22+. but im pretty sure the 2.21 will be the release hboot.
im not sure i want to upgrade yet,either,tho i beieve with the evo3d method we will be able to donwgrade if needed.
my main issue is that i still want to be able to use these older roms,at least long enuff everyone has updated their base and made the old version obsolete. i dont really care about getting back to gingerbread,but without s-off i think its best not to rush into anything.
grrr this whole s-on thing really ticks me off on my thunderbolt or sensation id just run the RUU and not care,as i could always go back to old firmware
Click to expand...
Click to collapse
again this is why we need s-off achieved somehow. i feel your pain scotty.
Well, from what I see in the Amon Ra thread, the mount points for storage are definitely different. (The changelog over on Android Police even mentions a "fix" for storage issues.) As for me, I'm going to wait until drellisdee updates Amon Ra for the new firmware, by which point everyone ought to have their ROMs updated and most of the new "gotcha's" that arise worked out.
mjh68 said:
Yes, the older custom roms will not work well with the new firmware. They run fine, but in my case you suddenly didn't have access to your external SD card . Some have lost both cards . Restoring with Scott's rom fixed this for some, I had made a backup of the stock RUU rom so just flashed back and all was good again. Then I flashed Scott's rom. Sounds like something changed with either the mounting points or the mmcc dev block on the new firmware.
Click to expand...
Click to collapse
scrosler from Scott's Rom's posted a flashable zip file that fixes the SD Card Issue.
Link
Related
I'm brand new to this phone and the rezound section on xda. I bought two of these phones yesterday and have both of them S=OFF at the moment. (Last night's fun)
In hboot they say "locked" even though S=OFF on both devices. I'd like to install an ICS ROM, but I'm not really sure what I need to install first before installing the ROM so it doesn't get all messed up.
I remember installing/flashing something on my Sensation to get ICS running on that device, but I'm just a little confused with the steps in the Development section because I'm new here.
Help?
you need to flash a modified Hboot for whichever firmware u are on
http://forum.xda-developers.com/showthread.php?t=1641670
yojoe600 said:
you need to flash a modified Hboot for whichever firmware u are on
Click to expand...
Click to collapse
Software Number: 2.01.605.11
Does it matter which one?
graymonkey44 said:
http://forum.xda-developers.com/showthread.php?t=1641670
Click to expand...
Click to collapse
I spent last night reading that.
yes if you are on GB you need the eng Hboot if you are on ICS firmware you need the jhboot from the s-off method
yojoe600 said:
yes if you are on GB you need the eng Hboot if you are on ICS firmware you need the jhboot from the s-off method
Click to expand...
Click to collapse
HBOOT 2.11.0000
I flashed the hboot after jhboot and I'm not sure if this is the right one for ICS?
android Version: 2.3.4
I would suggest running the latest RUU and then installing whichever ICS ROM you want.
woah wait what
what are you guys saying?
I was stock,GB,rooted, SOFF.
my hboot said 's-off' and '***LOCKED***'.
you don't need to do anything special, you are s-off!
just get the 600mb ph98img.zip from the latest leak and drop it on your SD card.
it'll have to flash twice (first reboot after boot/recovery is flashed, then it does the rest the second time through)
that's how i went to the leak, still locked and s-off. and it runs great!
thatsricci said:
woah wait what
what are you guys saying?
I was stock,GB,rooted, SOFF.
my hboot said 's-off' and '***LOCKED***'.
you don't need to do anything special, you are s-off!
just get the 600mb ph98img.zip from the latest leak and drop it on your SD card.
it'll have to flash twice (first reboot after boot/recovery is flashed, then it does the rest the second time through)
that's how i went to the leak, still locked and s-off. and it runs great!
Click to expand...
Click to collapse
Which one is the latest leak? I'm really not trying to be a moron.
thatsricci said:
woah wait what
what are you guys saying?
I was stock,GB,rooted, SOFF.
my hboot said 's-off' and '***LOCKED***'.
you don't need to do anything special, you are s-off!
just get the 600mb ph98img.zip from the latest leak and drop it on your SD card.
it'll have to flash twice (first reboot after boot/recovery is flashed, then it does the rest the second time through)
that's how i went to the leak, still locked and s-off. and it runs great!
Click to expand...
Click to collapse
So its just that simple for those of us SOFF and GB?
1) Put the PHxxxx.zip image on the SD
2) Boot it into HBoot twice (not flashing via recovery)
3) Flash over our favorite ICS Rom
No patches, no nothing? Is this right?
There are like 10 files in this link.
http://forum.xda-developers.com/showthread.php?t=1365654
I have S=OFF, I'm running GB, with the stock ROM and all the specs I told you. I'm not exactly clear on which one I need to install before installing a ICS ROM.
Do I install an ENG hboot... Do I install a ICS RUU file or a GB one? I'm assuming the bigger the number the newer RUU?
I'm not sure when you say about rom... i'm flashing the 600mb leak file from yesterday (5/7/2012) : http://forum.xda-developers.com/showthread.php?t=1641249
it has the radios, boot, recovery, kernel, rom, everything. I just did it all, like an OTA upgrade.
thatsricci said:
I'm not sure when you say about rom... i'm flashing the 600mb leak file from yesterday (5/7/2012) : http://forum.xda-developers.com/showthread.php?t=1641249
it has the radios, boot, recovery, kernel, rom, everything. I just did it all, like an OTA upgrade.
Click to expand...
Click to collapse
I want to Install the RUU file then a modded ROM (Clean ROM ICS)
If I install the ROM before flashing the RUU won't it bootloop?
jdmba said:
So its just that simple for those of us SOFF and GB?
1) Put the PHxxxx.zip image on the SD
2) Boot it into HBoot twice (not flashing via recovery)
3) Flash over our favorite ICS Rom
No patches, no nothing? Is this right?
Click to expand...
Click to collapse
Is this all that all I have to do?
2Noob4U said:
I want to Install the RUU file then a modded ROM (Clean ROM ICS)
If I install the ROM before flashing the RUU won't it bootloop?
Click to expand...
Click to collapse
I'm not sure... I didn't have any trouble going straight to the leaked RUU from yesterday. I have not flashed any custom roms.
thatsricci said:
I'm not sure... I didn't have any trouble going straight to the leaked RUU from yesterday. I have not flashed any custom roms.
Click to expand...
Click to collapse
Is there something wrong with the Custom ROMs? (Please Developers don't stone me)
I just came from a device with tons of custom ROMs that were way better than anything stock and would install a kernel and everything through recovery when you were installing the ROM...
I'm just not used to the process yet with this device.
I don't think there's anything wrong with them.
I just haven't taken the plunge yet, still researching.... regardless, Once you're fully up to date on the latest RUU, going to a custom rom based on it will be a piece of cake. But i'm not sure the developers have updated their roms to all the latest leaks, in which case, check with the rom you're trying to upgrade to - I'm not certain they all include new kernels/radios...etc. like the leaked ICS does.
thatsricci said:
I don't think there's anything wrong with them.
I just haven't taken the plunge yet, still researching.... regardless, Once you're fully up to date on the latest RUU, going to a custom rom based on it will be a piece of cake. But i'm not sure the developers have updated their roms to all the latest leaks, in which case, check with the rom you're trying to upgrade to - I'm not certain they all include new kernels/radios...etc. like the leaked ICS does.
Click to expand...
Click to collapse
Okay. Can I wifi tether with the new RUU link you gave me?
2Noob4U said:
Okay. Can I wifi tether with the new RUU link you gave me?
Click to expand...
Click to collapse
Great question, let me test that right now.
Edit: seems to not work straight up with the one from the market. i'll check a different .apk that I have here, i know the custom roms use their own .apk's usually.
as i recall from doing this on GB, you gotta configure it right, and then it'll work. But you DO need root, so after you RUU, install AmonRA 3.15, and run the su/superuser install from the recovery menu.
So, coming from a Thunderbolt...rooting and getting s-off on a rezound seems like rocket science in comparison. I've read and read for the past four weeks but I'm asking for your guys' help and clarification before I proceed.
Here is what has happened so far: My buddies Rezound is currently HTC dev unlocked with a custom ICS rom on it with S-on. I want to get him s-off so flashing roms and kernels will be a piece of cake without adding a bunch more steps. I figured out how to do it and understand the process myself pretty clearly but trying to explain it to my buddy...yeah, I might as well be trying to teach him another language.
Now, I assume he is on Gingerbread firmware since I haven't flashed the leaked ICS RUU(have to install gingerbread firmware patch on his ICS roms). This already is getting complex to me. On my good old thunderbolt I just had to use revolutionary to get s-off then it was flash whatever I wanted, gingerbread or froyo and flash compatible radios.
Here's what I want to do. I figure I should get him off of gingerbread firmware since the phone will eventually be getting ICS via OTA. To do this, I believe I have to re-lock the phone and then flash the ICS ruu. After that I can proceed to get s-off using the wire trick.
My questions are these: do I have to flash a stock rom before I re-lock the phone and flash the ICS ruu, or can I just leave his current rom on there(rezrom)?
And finally, what ICS version am I supposed to flash in order to get s-off? I see conflicting reports of this will work, any one will work, or only a certain one will work with the s-off method. Could one of you be kind enough to send me a link to download said RUU? I tried downloading one but it would check it in HBOOT and after the 5 minutes it took to check it, it didn't give me the option of running it...just went to the main hboot menu(fastboot, recovery, reboot, etc.). I don't know if it's because I was UNLOCKED (i realize you can't flash ruu while unlocked), or if the file was bad.
Sorry for the long wordy post but I felt like I should be thorough. Thanks in advance.
antiseen said:
So, coming from a Thunderbolt...rooting and getting s-off on a rezound seems like rocket science in comparison. I've read and read for the past four weeks but I'm asking for your guys' help and clarification before I proceed.
Here is what has happened so far: My buddies Rezound is currently HTC dev unlocked with a custom ICS rom on it with S-on. I want to get him s-off so flashing roms and kernels will be a piece of cake without adding a bunch more steps. I figured out how to do it and understand the process myself pretty clearly but trying to explain it to my buddy...yeah, I might as well be trying to teach him another language.
Now, I assume he is on Gingerbread firmware since I haven't flashed the leaked ICS RUU(have to install gingerbread firmware patch on his ICS roms). This already is getting complex to me. On my good old thunderbolt I just had to use revolutionary to get s-off then it was flash whatever I wanted, gingerbread or froyo and flash compatible radios.
Here's what I want to do. I figure I should get him off of gingerbread firmware since the phone will eventually be getting ICS via OTA. To do this, I believe I have to re-lock the phone and then flash the ICS ruu. After that I can proceed to get s-off using the wire trick.
My questions are these: do I have to flash a stock rom before I re-lock the phone and flash the ICS ruu, or can I just leave his current rom on there(rezrom)?
And finally, what ICS version am I supposed to flash in order to get s-off? I see conflicting reports of this will work, any one will work, or only a certain one will work with the s-off method. Could one of you be kind enough to send me a link to download said RUU? I tried downloading one but it would check it in HBOOT and after the 5 minutes it took to check it, it didn't give me the option of running it...just went to the main hboot menu(fastboot, recovery, reboot, etc.). I don't know if it's because I was UNLOCKED (i realize you can't flash ruu while unlocked), or if the file was bad.
Sorry for the long wordy post but I felt like I should be thorough. Thanks in advance.
Click to expand...
Click to collapse
Just s-off on GB. You can do it on ICS or GB works the same way. Just if you RUU to ICS you will have to reunlock to soff.
Once s-off he can flash any ruu he wants in any order and keep s-off.
Also on a secondary note, you must have not had a thunderbolt when we first got s-off as getting s-off manually took about 30+ mins of constant cmd line use.
S-off on the rezound is much easier than it sounds. The only part that gives people trouble is the wire trick and mainly because it is all about timing.
Sent from my ADR6425LVW using XDA
I will say this outright: you can S-off right now using the GB package option on unlimited.io since that is the firmware you have. Answering the rest of this assuming an upgrade to ICS firmware, but that is the simplest path.
antiseen said:
Now, I assume he is on Gingerbread firmware since I haven't flashed the leaked ICS RUU(have to install gingerbread firmware patch on his ICS roms).
Click to expand...
Click to collapse
Correct. If you're patching the firmware is still Gingerbread. Check in the bootloader for "hboot 2.11" to confirm this. Only way you can update firmware and radios while S-on is to run a RUU.
antiseen said:
Here's what I want to do. I figure I should get him off of gingerbread firmware since the phone will eventually be getting ICS via OTA. To do this, I believe I have to re-lock the phone and then flash the ICS ruu. After that I can proceed to get s-off using the wire trick.
Click to expand...
Click to collapse
When a phone gets an OTA update, it is expecting you to be on the latest official release. That currently is the 2.01.605.11 Gingerbread build, the first OTA we had. That means you need to be on the GB firmware, and stock everything else, not on ICS firmware.
That said, last part is correct: You would re-lock, flash an ICS RUU, unlock again, put recovery back on, and either flash a pre rooted stock ROM based on the leaks, or root the stock ROM yourself. Then you are on ICS firmware, ready for S-off.
antiseen said:
My questions are these: do I have to flash a stock rom before I re-lock the phone and flash the ICS ruu, or can I just leave his current rom on there(rezrom)?
Click to expand...
Click to collapse
Leave the ROM. Do a nandroid backup. Re-lock and flash the RUU. You can restore the nandroid afterwards, just be sure to repatch the thing to new ICS firmware if you go that route. Check second listing in the Roll Up Sticky post in the Dev section.
antiseen said:
And finally, what ICS version am I supposed to flash in order to get s-off? I see conflicting reports of this will work, any one will work, or only a certain one will work with the s-off method. Could one of you be kind enough to send me a link to download said RUU? I tried downloading one but it would check it in HBOOT and after the 5 minutes it took to check it, it didn't give me the option of running it...just went to the main hboot menu(fastboot, recovery, reboot, etc.). I don't know if it's because I was UNLOCKED (i realize you can't flash ruu while unlocked), or if the file was bad.
Sorry for the long wordy post but I felt like I should be thorough. Thanks in advance.
Click to expand...
Click to collapse
Unlimited.io has files for GB firmware and the first three out of four ICS leaks. Note this last leak, the fourth one, is compatible with the unlimited.io files for the third leak ("5/7 leak"). So little was changed, so you're safe going with that combo if you wish.
nosympathy said:
Also on a secondary note, you must have not had a thunderbolt when we first got s-off as getting s-off manually took about 30+ mins of constant cmd line use.
Click to expand...
Click to collapse
You're actually right. I didn't get my TB til June and I spent months reading how to get s-off and finally did it in...august or september, I forget. It was MUCH easier by then.
I was familiar with the original process(only by reading, but felt confident in doing it that way) but by the time I was done learning everything about it, revolutionary method came out and I did it that way.
I know that I can get s-off right now on his gingerbread firmware, my only question is what happens when ICS does get released and all the good ROMS start to come out? I want to get him on an AOSP rom when they come out. I feel like he'll be stuck on gingerbread firmware and when it comes time to flash any of the ICS roms, he'll be clueless. I could figure out how to do it if it required an extra step or two but explaining that to him might be a bit much. I'd rather him be geared for ICS (he has no intention of going back to gingerbread, ever).
Also, I was under the impression that flashing a RUU would make it S-on. So if I ever wanted to upgrade his firmware to ICS we would have to do the wire trick again to achieve s-off once more.
Anyway, Thanks a ton guys for your feedback already. Love this community and you're both a great help. Thanks for the clarification/instructions phantasm.
antiseen said:
I feel like he'll be stuck on gingerbread firmware and when it comes time to flash any of the ICS roms, he'll be clueless. I could figure out how to do it if it required an extra step or two but explaining that to him might be a bit much. I'd rather him be geared for ICS (he has no intention of going back to gingerbread, ever).
Click to expand...
Click to collapse
Hop through S-off with the GB files from unlimited.io. Keep the stock bootloader for now rather than flashing the JuopunutBear hboot when their program asks you. (Note S-off makes the bootloader "Locked" again, but the JB files are hacked so you can use them *as if* they are Unlocked status... handy and makes it simpler to get the phone ready for warranty exchanges again. But! We want to make sure we get ICS firmware and radios first...then slap on an *ICS* JB bootloader...)
antiseen said:
Also, I was under the impression that flashing a RUU would make it S-on. So if I ever wanted to upgrade his firmware to ICS we would have to do the wire trick again to achieve s-off once more.
Click to expand...
Click to collapse
Nope. Once you achieve S-off you keep S-off. The only thing that affects S-off is turning the flag back on manually yourself with some fastboot commands.
So now you will be S-off and with a Locked stock bootloader. Download the RUU from the 6/10 leak here, rename to just PH98IMG.zip and flash it in bootloader:
http://www.androidfilehost.com/main/-Support_Files-/RUU/Vigor/RUU_Vigor_3.14.605.10_PH98IMG.zip
Then grab "[ICS][2.25][JB][5-7]PH98IMG.zip" from SuperChilPil's repository. (Note the 6/10 leak and the 5/7 leak have the same bootloaders just like the first pair of leaks did, so this is fine to use.) Rename to PH98IMG.zip and flash in bootloader:
http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
This will make you S-off with a JuopunutBear hacked hboot, running the latest firmware and ROM available. Choose a recovery to flash, preferably TWRP or AmonRa. ClockworkMod has charging issues, there is a fix floating around thanks to NilsP and his own source if you insist. You can then proceed to flash the ICS custom ROM of your choice.
TWRP:
http://forum.xda-developers.com/showthread.php?t=1613576
AmonRa:
http://forum.xda-developers.com/showthread.php?t=1339679
CWM (fixed):
http://forum.xda-developers.com/showthread.php?t=1722989
Edit: User zhp pilot claims this version of CWM is also not functioning properly at this time, see the thread. Proceed with caution on CWM.
And don't forget to make a splash screen now that you are S-off lol, stop blinding yourself with that white HTC screen:
http://forum.xda-developers.com/showthread.php?t=1615811
~~~
Other useful files for S-off if you don't have them on the PC... The latest HTC drivers (extracted from HTC Sync so you don't have to download all of that) and an adb/fastboot mini console:
https://rapidshare.com/files/1796700693/HTCDriver_3.0.0.021.exe
http://rapidlibrary.com/files/adb-fastboot-and-other-tools-zip_ulcmnmxxtci89on.html
antiseen said:
Anyway, Thanks a ton guys for your feedback already. Love this community and you're both a great help. Thanks for the clarification/instructions phantasm.
Click to expand...
Click to collapse
Nope, thanks you for asking.
antiseen said:
So, coming from a Thunderbolt...rooting and getting s-off on a rezound seems like rocket science in comparison. I've read and read for the past four weeks but I'm asking for your guys' help and clarification before I proceed.
Here is what has happened so far: My buddies Rezound is currently HTC dev unlocked with a custom ICS rom on it with S-on. I want to get him s-off so flashing roms and kernels will be a piece of cake without adding a bunch more steps. I figured out how to do it and understand the process myself pretty clearly but trying to explain it to my buddy...yeah, I might as well be trying to teach him another language.
Now, I assume he is on Gingerbread firmware since I haven't flashed the leaked ICS RUU(have to install gingerbread firmware patch on his ICS roms). This already is getting complex to me. On my good old thunderbolt I just had to use revolutionary to get s-off then it was flash whatever I wanted, gingerbread or froyo and flash compatible radios.
Here's what I want to do. I figure I should get him off of gingerbread firmware since the phone will eventually be getting ICS via OTA. To do this, I believe I have to re-lock the phone and then flash the ICS ruu. After that I can proceed to get s-off using the wire trick.
My questions are these: do I have to flash a stock rom before I re-lock the phone and flash the ICS ruu, or can I just leave his current rom on there(rezrom)?
And finally, what ICS version am I supposed to flash in order to get s-off? I see conflicting reports of this will work, any one will work, or only a certain one will work with the s-off method. Could one of you be kind enough to send me a link to download said RUU? I tried downloading one but it would check it in HBOOT and after the 5 minutes it took to check it, it didn't give me the option of running it...just went to the main hboot menu(fastboot, recovery, reboot, etc.). I don't know if it's because I was UNLOCKED (i realize you can't flash ruu while unlocked), or if the file was bad.
Sorry for the long wordy post but I felt like I should be thorough. Thanks in advance.
Click to expand...
Click to collapse
In order to S-off the Rezound, you need to be HTCDEVunlocked, Rooted and on Stock Rom.
Kernel 3.0.16---I hope this is all you guys need to help me diagnose this issue.
Anyway, I have a long day of flying ahead of me and it would really suck to have no phone. I have S- on and ClockworkMod.
A buddy of mine had previously rooted my Rezound and put (I believe Scott's rom) on it. I tried the Venom rom, bam, no radio. Switched to the Vigor Stock Deodex rom and same issue. No radio.
This seems like a quick fix, what do I need? All of the threads on radios say S-Off only.
Thanks guys.
mantle88 said:
Kernel 3.0.16---I hope this is all you guys need to help me diagnose this issue.
Anyway, I have a long day of flying ahead of me and it would really suck to have no phone. I have S- on and ClockworkMod.
A buddy of mine had previously rooted my Rezound and put (I believe Scott's rom) on it. I tried the Venom rom, bam, no radio. Switched to the Vigor Stock Deodex rom and same issue. No radio.
This seems like a quick fix, what do I need? All of the threads on radios say S-Off only.
Thanks guys.
Click to expand...
Click to collapse
To flash a radio, yes you need S-OFF.
It's better to use Amon-Ra recovery since ClockworkMod has given users a hard time.
If you have S-ON then the last radio flashed was with the last PH98IMG that was loaded onto the phone. So technically it's a rom issue.
Are you trying to flash an ICS ROM over a gingerbread radio? That could be your problem
Tachi91 said:
To flash a radio, yes you need S-OFF.
It's better to use Amon-Ra recovery since ClockworkMod has given users a hard time.
If you have S-ON then the last radio flashed was with the last PH98IMG that was loaded onto the phone. So technically it's a rom issue.
Are you trying to flash an ICS ROM over a gingerbread radio? That could be your problem
Click to expand...
Click to collapse
I actually have a 4g signal now, I didn't do anything but reboot the phone again.
Now, I just realized that the phone will not read the SD card, nor will it handle phone calls - when a call comes in it will reboot, when making a call it will reboot.
I also believe that the radio is an ICS one. Any way to double check?
Are you saying I should S-Off now? Or is there a short time fix of something I can flash now? (will be at the airport soon and won't be able to flash anything)
Baseband is 0.95.00.118r, 0.95.00.1223r
Running Android 4.03
Another question, can I S-OFF without ADB?
mantle88 said:
I actually have a 4g signal now, I didn't do anything but reboot the phone again.
Now, I just realized that the phone will not read the SD card, nor will it handle phone calls - when a call comes in it will reboot, when making a call it will reboot.
I also believe that the radio is an ICS one. Any way to double check?
Are you saying I should S-Off now? Or is there a short time fix of something I can flash now? (will be at the airport soon and won't be able to flash anything)
Baseband is 0.95.00.118r, 0.95.00.1223r
Running Android 4.03
Click to expand...
Click to collapse
That is gb radio. Flash the old firmware patch
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
That is gb radio. Flash the old firmware patch
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Any idea where to find that?
Thanks by the way
Installed patch, no dice. Still crappy radio.
How can I revert back to stock? I have the leaked ICS rom already downloaded 3.14.605
So I have Scott's CleanROM GBE 1.7.5 on my phone. I was wandering through my phone's settings, and accidentally hit something in the update area. I do not know what I was thinking, but I know I expected it to ask me if I was sure I wanted to update. So far it has only done the first part where it prepares the phone for the update. I do not know when the other part is coming but I assume it is automatic. I was planning on updating to a rooted ICS once I felt comfortable with it (just seemed a little harder than my original flash of rooted GB). So if it would be easier to just update to ICS some way now, I would be very willing to do that. I am s-on, I believe I installed Amon Ra, but I am not sure how to check and not sure if I have an actual recovery rom or not.
I checked around and found similar problems, but nothing really like mine since my update has not gone all the way thru yet. If anyone could help, it would be greatly appreciated. THank you.
Easiest way is to relock your bootloader, run the newest ruu, unlock and flash recovery again. That way you will be set up to run any ics Rom without having to worry about flashing a patch
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
Easiest way is to relock your bootloader, run the newest ruu, unlock and flash recovery again. That way you will be set up to run any ics Rom without having to worry about flashing a patch
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Ok just to make sure I know and don't mess anything else up. I relock (should be easy to.find a guide) . Then run the update on my phone? Then unlock thru HTC again, and flash the actual amon or CWM to my phone? And from there I will be able to flash any ICS Rom with more ease?
And thank you for the quick reply.
Edit: I searched the internet more for less-similar situations. I think all I have to do is re-lock. Download the newest RUU from Android police and put it in the root of the SD card as PH98IMG.zip (I'm assuming it should be the internal memory, but please correct me if I am wrong.) Hold volume down & power to boot into bootloader, then the phone takes it from there?
Also,nothing I have to do as far as unrooting?
malignancyy said:
Also,nothing I have to do as far as unrooting?
Click to expand...
Click to collapse
Nope just relock the bootloader
AshtonTS said:
Nope just relock the bootloader
Click to expand...
Click to collapse
Okay, thanks a lot. And I edited this into a prior post, but I just wanted to make sure:
I have to re-lock. Download the newest RUU from Android police and put it in the root of the SD card as PH98IMG.zip (I'm assuming it should be the internal memory, but please correct me if I am wrong.) Hold volume down & power to boot into bootloader, then the phone takes it from there?
malignancyy said:
Okay, thanks a lot. And I edited this into a prior post, but I just wanted to make sure:
I have to re-lock. Download the newest RUU from Android police and put it in the root of the SD card as PH98IMG.zip (I'm assuming it should be the internal memory, but please correct me if I am wrong.) Hold volume down & power to boot into bootloader, then the phone takes it from there?
Click to expand...
Click to collapse
Then you just have to press continue when it tells you to.
PS: Another way to get to the bootloader is to use adb (make sure USB debugging is enabled on your phone)
Command:
adb reboot bootloader
I find it easier than holding down buttons for a long time, but that's just my personal preference.
(Also, most custom ROMs can reboot to bootloader from within the ROM. I forget if CleanROM GBE includes the advanced power menu.)
pwned3 said:
Easiest way is to relock your bootloader, run the newest ruu, unlock and flash recovery again. That way you will be set up to run any ics Rom without having to worry about flashing a patch
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Good advise, and if he RUUs to ICS, then he should not even get asked to install the update because it will already be installed on his phone.
Also RUU twice. Just reboot into bootloader right away and install the RUU a second time. Then boot up normally and remove the zip file from the sdcard.
Thanks, you all helped a lot. I was able to get the stock rom, rooted, and running smoothly. But, once I tried to install custom roms I had problems. I decided to S-off to make it easier from here on out. After a few tries, it said I had successfully done the S-off. I tried to install Juopunutbear custom hboot, directly afterwards and it said it installed but I was stuck on the Juopunutbear screen. After this, I have not been able to get past hboot.I do not think the custom hboot actually installed. It is saying from the top:
***TAMPERED***
***LOCKED***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.27.0000
RADIO-2.22.10.0801r/2.22.10.0803r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Aug 6 2012, 19:24:37
My external sd card needed formatting, so I just did that. And my plan is to RUU again (i guess twice), flash recovery (when clicked on currently, nothing happens), I guess root although I am not sure about this part, then try to install a custom rom.
Didn't want to make another thread just to check on this, but does this sound about right?
And as far as installing rom since I am now s-off, just go to recovery and flash it, nothing else at all to worry about?
malignancyy said:
Thanks, you all helped a lot. I was able to get the stock rom, rooted, and running smoothly. But, once I tried to install custom roms I had problems. I decided to S-off to make it easier from here on out. After a few tries, it said I had successfully done the S-off. I tried to install Juopunutbear custom hboot, directly afterwards and it said it installed but I was stuck on the Juopunutbear screen. After this, I have not been able to get past hboot.I do not think the custom hboot actually installed. It is saying from the top:
***TAMPERED***
***LOCKED***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.27.0000
RADIO-2.22.10.0801r/2.22.10.0803r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Aug 6 2012, 19:24:37
My external sd card needed formatting, so I just did that. And my plan is to RUU again (i guess twice), flash recovery (when clicked on currently, nothing happens), I guess root although I am not sure about this part, then try to install a custom rom.
Didn't want to make another thread just to check on this, but does this sound about right?
And as far as installing rom since I am now s-off, just go to recovery and flash it, nothing else at all to worry about?
Click to expand...
Click to collapse
The jbear hboot might have failed because you are on the newest global update with 2.27 hboot, and I believe the controlbear tool still has the 2.25 hboot. (someone correct me if I'm wrong)
I think there is an unguarded 2.27 hboot somewhere, so you should flash that manually.
Sent from my NeoMax Rezound
Right now, like I said the hboot says at the top 2.27.0000
When I reboot from there, or boot it regularly it goes to a JuopunutBear, black and green writing screen.
I have tried to install this forum.xda-developers.com/showthread.php?t=1843030 ([HBOOT] HBoot 2.27 (from 4.03.605 OTA) Unlocked) from both, but cannot figure out how to do so.
edit: within JuopunutBear, wiping says "can't open" and applying update gives "failed to open loopdevice" and "failed to mount /sdcard" when I try to update.
Within the regular hboot, I get "no image" as it searches for files.
Well, I put the same file on a new sd card, and it worked on the first try, kinda.
Now it appears my phone is bricked. It will not boot at all. She barely lasted a few hours s-off before I messed it up. Any tips anyone out there can give to this sad fellow, or am I off to get a replacement?
A little more info on this. Windows tries installing QHUSB_DLOAD driver for it when plugged in, but unsuccessfully. The charging indicator does not come on either. Have tried to turn it on plugged in with battery out, and battery in both ways.
malignancyy said:
Well, I put the same file on a new sd card, and it worked on the first try, kinda.
Now it appears my phone is bricked. It will not boot at all. She barely lasted a few hours s-off before I messed it up. Any tips anyone out there can give to this sad fellow, or am I off to get a replacement?
Click to expand...
Click to collapse
Depending on what caused the brick, it may be recoverable.
Check out the unbricking thread in the dev section.
Sent from my NeoMax Rezound
Wanted to post this in the NeoMax thread, but I am currently not allowed to. I gave up on my last Rezound, and am getting a replacement here soon. I did a bunch of reading before and after I got my Rezound, and a bunch more the past few days as I wanted to get an ICS rom. Unfortunately, the one time I deferred from guides I followed (installing the JBear hboot), I killed my Rezound. I now want to stay S-on, at least until I gain some more familiarity and skill with this whole process.
What I plan on doing is once I get the Rezound, installing the OTA update, possibly having to wait for it to do so. I assume this would be the newest, .2, global update. I plan to unlock, flash recovery, then root. The rom I really want however is NeoMax. There are limited instructions on how I go about this. But from what I understand I change the filename to PH98IMG and flash it from hboot? The file name is originally, GlobalRuuPH98IMG.zip, but the thread title claims ICS De-Sensed 3.14.605.12, which I believe is two versions prior. So here I am lost. If it is in fact older, I have to flash the rom through recovery, then flash the kernel, correct? If so, do I just use the 3.14.605 that was in the NeoMax thread?
Sorry to bother you all with what i'm sure others have done many times. Like I said, I have read a lot on this, its just that I either did not understand in the least what the guides were saying, or it seemed like this situation was much different. And on a side note, if there is any other rom out there that someone would recommend that would make this easier (such as being on the latest kernel), I wouldn't be opposed to trying it. I just want one that is desensed, as it is one of my main reasons for wanting a custom rom.
malignancyy said:
Wanted to post this in the NeoMax thread, but I am currently not allowed to. I gave up on my last Rezound, and am getting a replacement here soon. I did a bunch of reading before and after I got my Rezound, and a bunch more the past few days as I wanted to get an ICS rom. Unfortunately, the one time I deferred from guides I followed (installing the JBear hboot), I killed my Rezound. I now want to stay S-on, at least until I gain some more familiarity and skill with this whole process.
What I plan on doing is once I get the Rezound, installing the OTA update, possibly having to wait for it to do so. I assume this would be the newest, .2, global update. I plan to unlock, flash recovery, then root. The rom I really want however is NeoMax. There are limited instructions on how I go about this. But from what I understand I change the filename to PH98IMG and flash it from hboot? The file name is originally, GlobalRuuPH98IMG.zip, but the thread title claims ICS De-Sensed 3.14.605.12, which I believe is two versions prior. So here I am lost. If it is in fact older, I have to flash the rom through recovery, then flash the kernel, correct? If so, do I just use the 3.14.605 that was in the NeoMax thread?
Sorry to bother you all with what i'm sure others have done many times. Like I said, I have read a lot on this, its just that I either did not understand in the least what the guides were saying, or it seemed like this situation was much different. And on a side note, if there is any other rom out there that someone would recommend that would make this easier (such as being on the latest kernel), I wouldn't be opposed to trying it. I just want one that is desensed, as it is one of my main reasons for wanting a custom rom.
Click to expand...
Click to collapse
Don't worry, you're not bothering anyone.
The people who claim to have bricked their phones when they have a boot loop and say nothing about their rom and firmware are bothering people.
Keep doing what you are currently doing and people will always be willing to help you.
Ok, so back to helping...
Of you're starting on GB, make sure you update to 3.14.605.12 before updating to the most recent one.
If you update via OTA then you don't need to worry.
Keep in mind that NeoMax is based off of the 3.14.605.12 build, so you'll have to mix n match the right way to get it to work on the latest firmware.
I believe it was you have to use the new kernel if you use the new radios and hboot.
So after installing NeoMax, flash the PH98IMG that contains the newer kernel, not the 3.14.605.12 version.
Or use fastboot to flash the kernel. (my preferred method while s-on)
Sent from my NeoMax Rezound
PS: A good way to get the required 10 posts to post in the dev section is post random stuff in the off topic thread.
wlmeng11 said:
Don't worry, you're not bothering anyone.
The people who claim to have bricked their phones when they have a boot loop and say nothing about their rom and firmware are bothering people.
Keep doing what you are currently doing and people will always be willing to help you.
Ok, so back to helping...
Of you're starting on GB, make sure you update to 3.14.605.12 before updating to the most recent one.
If you update via OTA then you don't need to worry.
Keep in mind that NeoMax is based off of the 3.14.605.12 build, so you'll have to mix n match the right way to get it to work on the latest firmware.
I believe it was you have to use the new kernel if you use the new radios and hboot.
So after installing NeoMax, flash the PH98IMG that contains the newer kernel, not the 3.14.605.12 version.
Or use fastboot to flash the kernel. (my preferred method while s-on)
Sent from my NeoMax Rezound
PS: A good way to get the required 10 posts to post in the dev section is post random stuff in the off topic thread.
Click to expand...
Click to collapse
As far as which kernel, this is what was said in the NeoMAX Q&A:
Q: "I flashed your rom and my phone gets really hot after a while. In fact, Ive noticed it on all the newer roms lately. What could be causing it and how can I attempt to fix it?"
A: "Make sure you have updated your radio to the latest available and then flash the 2nd to latest kernel. This combination has been known to have the best rom performance for all my roms and decreased heat"
SO this means I should use the 4.03.605.1? And the newest radio will automatically still be on there from the OTA update, or will I have to flash those as well? I have no experience in flashing radios so this is new ground to me.
malignancyy said:
As far as which kernel, this is what was said in the NeoMAX Q&A:
Q: "I flashed your rom and my phone gets really hot after a while. In fact, Ive noticed it on all the newer roms lately. What could be causing it and how can I attempt to fix it?"
A: "Make sure you have updated your radio to the latest available and then flash the 2nd to latest kernel. This combination has been known to have the best rom performance for all my roms and decreased heat"
SO this means I should use the 4.03.605.1? And the newest radio will automatically still be on there from the OTA update, or will I have to flash those as well? I have no experience in flashing radios so this is new ground to me.
Click to expand...
Click to collapse
That QA is outdated.
It was referring to using the 3.14.605.07 kernel as opposed to the then-most-recent 3.14.605.10
Back then those two builds were similar enough that they could mix n match without issues.
Between 3.14.605.12 and 4.03.605.1 is a lot of changes. (whole number change to represent it) Specifically, new hboot and radios. Therefore, it is incompatible with the older kernels.
When you're S-ON you can't touch the radios except through an official RUU.
Even with s-off I doubt you can flash radios from recovery (not sure on this one), and NeoMax doesn't have any radio files anyway. (nor does any rom I know for this phone)
If you haven't yet updated to 4.03.605.1 then I recommend that you stay on 3.14.605.12 until Neo updates the ROM.
If you already updated, it is still possible to run NeoMax. You just have to manually flash the new 4.03.605.1 kernel after installing the ROM.
Sent from my NeoMax Rezound
So I'm currently on Flyhalf's CM10.1 (S-ON), and I checked the recommended firmware/radios for the ROM and realized I'm outdated. It calls for Hboot 2.26 and radio 2.23.10.0123r, 2.23.10.0124r. but I'm on 2.25 and 1.22.10.0421r/1.22.10.0424r. I just updated to the latest version of the rom and I keep getting random bootlooping as well as the rom being way more unstable than the previous build I was on for about 4 months.
So, I'm trying to use Wildhorse's guide to updating firmware through RUU in hopes that it will solve my problems and it just plain isn't working. I've put the RUU in my external SD as PH98IMG, waited for my battery to charge to 90%, shut off the phone, pulled the battery, then gone into Hboot to flash it but I keep getting "No Image or Wrong Image" and it just goes back to the main Hboot screen every single time. Can anyone explain to me why this is happening even though I'm following everybody's directions exactly? I've been searching through the forums for about 2 hours now and I can't get an answer.
I'm still kind of new to HTC devices and how they work, so if anyone could help me figure this out I'd be very thankful.
BrahManty said:
So I'm currently on Flyhalf's CM10.1 (S-ON), and I checked the recommended firmware/radios for the ROM and realized I'm outdated. It calls for Hboot 2.26 and radio 2.23.10.0123r, 2.23.10.0124r. but I'm on 2.25 and 1.22.10.0421r/1.22.10.0424r. I just updated to the latest version of the rom and I keep getting random bootlooping as well as the rom being way more unstable than the previous build I was on for about 4 months.
So, I'm trying to use Wildhorse's guide to updating firmware through RUU in hopes that it will solve my problems and it just plain isn't working. I've put the RUU in my external SD as PH98IMG, waited for my battery to charge to 90%, shut off the phone, pulled the battery, then gone into Hboot to flash it but I keep getting "No Image or Wrong Image" and it just goes back to the main Hboot screen every single time. Can anyone explain to me why this is happening even though I'm following everybody's directions exactly? I've been searching through the forums for about 2 hours now and I can't get an answer.
I'm still kind of new to HTC devices and how they work, so if anyone could help me figure this out I'd be very thankful.
Click to expand...
Click to collapse
You are on a leaked firmware, the currently available RUUs are all older than that, and you can't go back when you are S-ON. You need to S-OFF then you can RUU back to 3.14.605.12 and then OTA back up to the current 4.5.605.14
acejavelin said:
You are on a leaked firmware, the currently available RUUs are all older than that, and you can't go back when you are S-ON. You need to S-OFF then you can RUU back to 3.14.605.12 and then OTA back up to the current 4.5.605.14
Click to expand...
Click to collapse
Okay, I was really hoping that wasn't the case. I hate to ask for more help, but I don't really understand how I'm supposed to get S-Off when I need to be on the stock RUU to do it, and I can't get on the stock RUU because I need to be S-Off to do so...
I hope I'm not stuck this way. Technically I'm on all the same software as I was yesterday, but now I'm getting random reboots all the time as well as bootloops that either go on for ten minutes or never end. I was on a build of CM10.1 from may with Amon Ra recovery, then tried to flash the newest TWRP that requires the new firmware (didn't realize I was on older firmware) and it bricked my phone. So I put on an older CWM recovery, tried to backup and it froze in the middle of every backup it tried to make. Put on an old TWRP, backups worked, so I flashed the newest version of CM10.1 (again not knowing I didn't have newest firmware) and that's when the bootlooping/rebooting started. I recovered to the old version of CM10.1 and the issue didn't go away, so now I'm just trying to figure out what I can do to get my phone in a usable state again.
BrahManty said:
Okay, I was really hoping that wasn't the case. I hate to ask for more help, but I don't really understand how I'm supposed to get S-Off when I need to be on the stock RUU to do it, and I can't get on the stock RUU because I need to be S-Off to do so...
I hope I'm not stuck this way. Technically I'm on all the same software as I was yesterday, but now I'm getting random reboots all the time as well as bootloops that either go on for ten minutes or never end. I was on a build of CM10.1 from may with Amon Ra recovery, then tried to flash the newest TWRP that requires the new firmware (didn't realize I was on older firmware) and it bricked my phone. So I put on an older CWM recovery, tried to backup and it froze in the middle of every backup it tried to make. Put on an old TWRP, backups worked, so I flashed the newest version of CM10.1 (again not knowing I didn't have newest firmware) and that's when the bootlooping/rebooting started. I recovered to the old version of CM10.1 and the issue didn't go away, so now I'm just trying to figure out what I can do to get my phone in a usable state again.
Click to expand...
Click to collapse
Hey, wait a sec... :laugh:
My bad, I just double checked, and with that Hboot/radio combination you are on stock ICS firmware already! Just RUU version 3.14.605.12, that should work without issues if done correctly and you should be back to pure ICS and can then allow the OTA to upgrade you in a few steps to 4.5.605.14
acejavelin said:
Hey, wait a sec... :laugh:
My bad, I just double checked, and with that Hboot/radio combination you are on stock ICS firmware already! Just RUU version 3.14.605.12, that should work without issues if done correctly and you should be back to pure ICS and can then allow the OTA to upgrade you in a few steps to 4.5.605.14
Click to expand...
Click to collapse
Oh, thank god. Hahah. I didn't remember ever flashing any leaked firmware before, so I was kind of confused there. I figured I may have done it somewhere in the unlocking/rooting process and just couldnt remember. Okay, thanks again for the help. RUU's have always confused me with the way they work. I should be stable in no time hopefully.
And now I'm having more issues... I can't use the Rom Updater because somethings wrong with my usb connection. I can plug it in and transfer files and such, but trying to use any ADB commands results in "Device not found" and the Rom Updater says it can't connect to my device either. My HTC Drivers are up to date, so I'm not sure why this is happening. Is there any way I can just get the PH98IMG.zip for 3.14.605.12 instead of having to use the RUU?
Not really sure what you are trying to run, I didn't think there was a 3.14.605.12 executable RUU, but use this page and instructions and grab the file: http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
Remember you will need to RELOCK the bootloader if I am not mistaken it is possible to hard brick if you don't!
Then copy to external SD card, name the file PH98IMG.zip (beware of the Windows "double zip" issue), verify MD5 on the SDcard, then reboot into hboot and go. Do it twice!!! Let it boot up and sit for about 10 minutes to calm down, then remove the PH98IMG.zip file from the SD card. Everything should be smooth sailing from there...
You should then be S-ON, completely stock. You will need to unlock again to do anything more
acejavelin said:
Not really sure what you are trying to run, I didn't think there was a 3.14.605.12 executable RUU, but use this page and instructions and grab the file: http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
Remember you will need to RELOCK the bootloader if I am not mistaken it is possible to hard brick if you don't!
Then copy to external SD card, name the file PH98IMG.zip (beware of the Windows "double zip" issue), verify MD5 on the SDcard, then reboot into hboot and go. Do it twice!!! Let it boot up and sit for about 10 minutes to calm down, then remove the PH98IMG.zip file from the SD card. Everything should be smooth sailing from there...
You should then be S-ON, completely stock. You will need to unlock again to do anything more
Click to expand...
Click to collapse
Strange, re-locking the bootloader was all I needed to get the RUU to update in my bootloader. No one else said to do that in any of the instructions, but I did it and immediately it started updating with the PH98IMG that I was originally trying to flash (from here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331).
I'm back to stock now, but firmware is 4.03.605.2, not 4.03.605.14. Is that going to be an issue or can I go right ahead with re-unlocking the bootloader and flashing recovery/roms?
BrahManty said:
Strange, re-locking the bootloader was all I needed to get the RUU to update in my bootloader. No one else said to do that in any of the instructions, but I did it and immediately it started updating with the PH98IMG that I was originally trying to flash (from here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331).
I'm back to stock now, but firmware is 4.03.605.2, not 4.03.605.14. Is that going to be an issue or can I go right ahead with re-unlocking the bootloader and flashing recovery/roms?
Click to expand...
Click to collapse
Well, I have some good news and bad news...
Bad news is you are now on a leaked firmware and will have to S-OFF to go up or down in versions unless a full RUU is released for the current OTA of 4.5.605.14...
Good news is you are the global leak, and you can use the JuopunutBear S-OFF exploit from http://unlimited.io/index.htm just as if you were on the original ICS release. Also, you can S-OFF and use most ROMs and recoveries as you are now on a global mode firmware.
acejavelin said:
Well, I have some good news and bad news...
Bad news is you are now on a leaked firmware and will have to S-OFF to go up or down in versions unless a full RUU is released for the current OTA of 4.5.605.14...
Good news is you are the global leak, and you can use the JuopunutBear S-OFF exploit from http://unlimited.io/index.htm just as if you were on the original ICS release. Also, you can S-OFF and use most ROMs and recoveries as you are now on a global mode firmware.
Click to expand...
Click to collapse
Lol, all right, I would have tried to get the right firmware on there but my phone got so buggy that it wouldn't even boot into the rom anymore. So I couldn't get it on the SD card and I had to make do with what I had on there. At this point, I'm just glad the phone is usable again and I might leave it stock for a while. Thank you so much for all your help, I couldn't have figured this out without you!
BrahManty said:
Lol, all right, I would have tried to get the right firmware on there but my phone got so buggy that it wouldn't even boot into the rom anymore. So I couldn't get it on the SD card and I had to make do with what I had on there. At this point, I'm just glad the phone is usable again and I might leave it stock for a while. Thank you so much for all your help, I couldn't have figured this out without you!
Click to expand...
Click to collapse
Cool, glad you got it working.
That firmware is actually pretty decent and rock solid stable, you shouldn't have any more software related issues... Plus you can root/ROM like normal from that version, the radios may be slightler lower than most recommended versions, but they should work fine. If you do decide to go the ROM route again, I would suggest going S-OFF before starting, it will just make it easier in the long run.
Hey, just wanted to ask some questions as a follow-up since this seems to be the most relevant (and active) thread to my issue:
Long story short, got a new (to me) Rezound. It was running CM10, from the forthnightly thread. New SIM card from Verizon and I was getting data, but the no mobile network found error. After reading the threads I could find on the error, went with the suggestion of a wipe and so I did. A few too many beers while reading thru the forums, and I did the wipe a bit too thoroughly. Now I have a no OS found, and instead of thinking I know what I'm doing I'd like to ask to make sure I understand this correctly.
Currently, the phone is S-OFF, with TWRP 2.5.0.0. It's saying I'm not rooted, but then again no OS to be rooted. The dump from my bootloader is as follows:
*** TAMPERED ***
*** LOCKED ***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.28.0000
RADIO-2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Sep 20 2012, 17:40:22
Click to expand...
Click to collapse
After checking this thread and this one here it looks like the following applies:
* I can just run the regular RUU (executable) to load a stock image without having to revert back to S-ON first.
* I will have to re-unlock the bootloader thru htcdev after RUUing
* I'll need to reinstall TWRP
Is this right? Am I missing anything?
JoeKamel said:
Hey, just wanted to ask some questions as a follow-up since this seems to be the most relevant (and active) thread to my issue:
Long story short, got a new (to me) Rezound. It was running CM10, from the forthnightly thread. New SIM card from Verizon and I was getting data, but the no mobile network found error. After reading the threads I could find on the error, went with the suggestion of a wipe and so I did. A few too many beers while reading thru the forums, and I did the wipe a bit too thoroughly. Now I have a no OS found, and instead of thinking I know what I'm doing I'd like to ask to make sure I understand this correctly.
Currently, the phone is S-OFF, with TWRP 2.5.0.0. It's saying I'm not rooted, but then again no OS to be rooted. The dump from my bootloader is as follows:
After checking this thread and this one here it looks like the following applies:
* I can just run the regular RUU (executable) to load a stock image without having to revert back to S-ON first.
* I will have to re-unlock the bootloader thru htcdev after RUUing
* I'll need to reinstall TWRP
Is this right? Am I missing anything?
Click to expand...
Click to collapse
You should be able to just boot into twrp and flash a rom
Sent from my ADR6425LVW using xda premium
izzaeroth said:
You should be able to just boot into twrp and flash a rom
Click to expand...
Click to collapse
Okay, that's good to know. For now though, if I just wanted to get my phone working, make sure there's not a SIM issue and such I could go back to a stock image without worrying? I just would rather do a lot more reading and make sure I understand what I'm doing before I try to put a rom on and screw things up further.
JoeKamel said:
Okay, that's good to know. For now though, if I just wanted to get my phone working, make sure there's not a SIM issue and such I could go back to a stock image without worrying? I just would rather do a lot more reading and make sure I understand what I'm doing before I try to put a rom on and screw things up further.
Click to expand...
Click to collapse
No doubt its good to be cautious when you are s-off. If you are just wanting plain jane stock then you could just flash a ruu from boot loader.
Sent from my ADR6425LVW using xda premium
izzaeroth said:
No doubt its good to be cautious when you are s-off. If you are just wanting plain jane stock then you could just flash a ruu from boot loader.
Click to expand...
Click to collapse
Okay, so if I go with the image here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331
Would I still need to relock the bootloader since I'm S-OFF or can I just flash that from TWRP and go from there?
JoeKamel said:
Okay, so if I go with the image here: http://forum.xda-developers.com/showpost.php?p=38527788&postcount=745&nocache=1&z=1965375486761331
Would I still need to relock the bootloader since I'm S-OFF or can I just flash that from TWRP and go from there?
Click to expand...
Click to collapse
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Click to expand...
Click to collapse
Recovery as in HBoot or TWRP? Because I still have TWRP. I can get the windows executable RUU for ICS if need be.
JoeKamel said:
Recovery as in HBoot or TWRP? Because I still have TWRP. I can get the windows executable RUU for ICS if need be.
Click to expand...
Click to collapse
Recovery = twrp
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Honestly I don't remember if you would have to relock to flash that in boot loader sine you are s-off, but I do know it won't flash from recovery
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
S-off is S-off... installing a RUU wont change that, it may set you back to 'Locked", but you are S-off so it doesn't matter, you can stay locked&s-off and its no different than unlocked/S-off.
If you are going back to stock and are S-off I would use the Global Mode Leak (4.3.605.2) available on AndroidPolice and flash in Hboot... rename file to PH98IMG.zip and place in root of SD card (how it gets there is a irrelevant) then reboot into Hboot, confirm and wait.
Sent from my HTC Aria (Liberty) running CM 7.2 using xda app-developers app