Related
I have been having this problem of stylus keep falling off from the silo.
Does anyone know how to fix it??
Thanks.
I don't know the solution (never needed it) but i remember seeing posts with tips when i registered last year. You must make a more extensive search
I put a piece of scotch tape around mine and I've had no problems since I did that. One wrap around was enough to keep it snug - right in the middle of the stylus.
here you go, maby it will help someone:
http://www.pdagold.com/articles/detail.asp?a=274
I've been having this problem,and just tried this solution. Give me a day and I'll tell you how it works out
Edit:
Well, it's been a day, and the stylus is being held in there better than ever. Definitely a recommended fix if you are having this problem
yeah, i find that the scotch tape trick works perfect. i put it right around the "neck" of the stylus - that would be nearest to the gray head part.
Falling Stylus
I've read on a website, don't have any link anymore, that if you will turn your mobile on the back, and remove your battery, there will be 2 openings where you can see some steel. If you take some sort of pen, or mini-screwdriver you can push against it, and when it clicks, your stylus must be a little tighter in his case. Didn't test it, because i lost my stylus because of the same problem
coldejong said:
I've read on a website, don't have any link anymore, that if you will turn your mobile on the back, and remove your battery, there will be 2 openings where you can see some steel. If you take some sort of pen, or mini-screwdriver you can push against it, and when it clicks, your stylus must be a little tighter in his case. Didn't test it, because i lost my stylus because of the same problem
Click to expand...
Click to collapse
yeah me too did it last year in sep2007.my kjam since then works well & i haven`t lost any thing up to date.
precaution- there are some plastic parts so pls be carefull
Solution to stylus falling out
I bought some sticky tack (you can get it at office supply stores) and placed a small amount in the channel. That seems to hold my stylus in with no problems.
Tape option is the best. I lost two stylus due to falling stylus and this time I put a small amount of tape on the outer edge and its perfectly fit in the phone. No more falling stylus.
I opened the phone, added a drop of hot-glue behind the little plastic pin and it holds the stylis like it was new.
The same trick I also applied to my universal, only there I added a bit to much, and the stylus now doesn't come out easily, so I need to use a little more force.
Before we were so rudely interrupted in the original thread, we were discussing the G1 hardware keyboard replacements. Please folks, if you must flame each other do it via PMs to avoid locking legitimate threads.
I've been able to find some inexpensive after market replacements on eBay, but still am not sure how difficult it is to actually do that. All the sites I've been able to find on the subject only provide time-lapse dis-assembly instructions of the entire phone. If anyone has done the replacement themselves, I'd greatly appreciate pointers on how to keep my phone operational after I put it back together.
I replaced the white keyboard in my Dream with a black one. It was a scary operation as it takes a bit of force to dismantle. I accidently pulled my antenna off and disconnected a flylead. ment my phone had no signal at all. later when i got home (did it in work ) i took it apart again and fixed it.
Take your time and have patience, alot of it is plastic and clipped together so requires a bit of force.
May I ask what is wrong with the keys on the bronze one? I did a quick skim of the old post and gather that you can't see the keys in daylight but I don't get why?
I'm just genuinely interested, I have a black G1 so never had such a problem.
brummiesteven said:
May I ask what is wrong with the keys on the bronze one? I did a quick skim of the old post and gather that you can't see the keys in daylight but I don't get why?
I'm just genuinely interested, I have a black G1 so never had such a problem.
Click to expand...
Click to collapse
It's the combination of silver keys with light-silver backlight that make the lettering almost impossible to see in day light conditions. I'd take a picture if I had a camera with me today. Whoever came up with that color combination should be fired. Or at least made to stare at it every day for the next year. I have to tilt the keyboard at a weird angle just to distinguish the letters. From what I understand the white G1s suffer from the same problem.
The "Backlight Off" app definitely helps as it lets you toggle the backlight with a keyboard shortcut. I'm looking for a more hardware solution though.
I've been thinking about changing keyboards and housings too. But from what ppl are saying it seems to be pretty exhaustive. Do any of you guys have the service manual? I DL'ed it from somewhere and it goes through each step of disassembly and also shows assembly. I'm sure it would help out to give an idea of what you need. But like I said, even having read the service manual, it's still quite scary.
A full housing from my understanding is a bitc(....doing the KB I can see why. The LCD portions look ridiculously complex in comparison to other phones.
That said if you have the proper tools , good organization or memory , steady hands and patience really shouldnt be "that" tough to do the keyboard.
Heres the thing. Its really not that hard to unscrew things etc...but the piece you need to move in order to get proper access to the KB has 2 ribbons that are a PAIN IN THE ASS to take off and put back properly. Theres so little room for error.If youve never worked with ribbons before BE CAREFUL.
I will say G1 is pretty unique in how its put together , I swear they were determined to make it as complicated as possible
The really pain in the ass part is that the online manual/guide will merely tell you something like "remove part A" but no explanation how. Theres also 2 screws I swear it glossed over leading to frustration when I did the trackball/front keys.
Torx 5 and really good mini screw driver are mandatory.
Nice lil workstation is really helpful..(masking tape ,towel , table lamp or LED headlamp , vitamin/pill cases etc)
Im no mechanical engineer but Ive opened up damn near everything Ive ever owned at some point. Took me a solid 3 hours from start to finish. With major time spent on organizing the screws pieces and those damn ribbons.
I will say the black KB makes a HUGE difference. Black key on the front arent necessary but do look better and add much needed contrast.
KOF33 said:
I will say the black KB makes a HUGE difference. Black key on the front arent necessary but do look better and add much needed contrast.
Click to expand...
Click to collapse
Pics, or it didn't happen
Thanks for the tips!
Chahk said:
Pics, or it didn't happen
Thanks for the tips!
Click to expand...
Click to collapse
As you can see I also replaced the trackball with a glowing white one.
lol at the trackball
doing a case swap is only bad the first time LMAO. I learned a lot, like for example the brass inserts that the screws go into...are not pre-installed. You must CUT Them out of the old housing and HAMMER them into the new oneBut in the end, it turned out very nice.
As far as just replacing the keyboard, it isnt too bad actually once you know what screws hold what down!
-Remove the 6 torx screws for the back housing
-GENTLY pry open the TOP of the casing with a plastic case tool, work your way down to the bottom of the housing. The bottom is a PITA to remove. I usually get it by rocking it gently back and forth
-remove the long and short coax leads from the motherboard side. swing them out of the way
-peel back the tape and GENTLY pull the bottom connector (mouthpiece module) from the motherboard.
-peel back more tape and lift the latch for the keyboard connector (the one on the side)
-Peel the camera module up SLOWLY (it is double side taped down) as well as the imei card. The cam cable is routed under it, lift it all as a unit. When you get to the motherboard, STOP
-Now, gently twist the whole camera and motherboard unit as a whole until it is free of the latch on the side. Gently lift the camera end exposing the 2 small ribbon connectors on the bottom.
-Peel back the tape and GENTLY lift the ribbon connectors out of the board. Place the motherboard/camera unit to the side for now.
-Remove all the black and silver screws for the metal piece. The lcd should stay in place as the mouthpiece plastics kinda hold it for you, but you should still support it to keep from hurting the connections.
-Viola, keyboard access. Remember when you put it back together be sure to re-tape all the connections, else when you drop your phone one of them may pop loose.
Keeping the motherboard and camera/imea plate all as one module saves you from a very difficult connection and will help you keep everything aligned when reassembling it.
I guess the spacebar has 2 functioning buttons, (left and right) ... well my right side just konked on me, and i was wondering if a replacement keyboard off ebay will fix this, or are they just the button "covers"?
the "buttons" are just plastic nubs that make contact on a board behind it. That board would be what you need. I dont know if there are any on eBay, but I have a spare one if you want to PM me for details.
I dropped my G1 about 6 months ago and was devastated. After entirely too much research I finally got the guts to purchase a replacement digitizer and managed to install it successfully. However, in the process I managed to rip the LCD ribbon cable. I then had to order a replacement LCD screen. I've also damaged one of the black ribbon cables pretty severely causing the touchscreen to become unresponsive sporadically. I've just placed an order for one of those ribbon cables and will hopefully have that up and running soon. I've also purchased an entire new housing unit to rebuild the phone to make it look as new.
Now when I first took this thing apart I was by NO MEANS an expert or have ever done something like this before. I'm just an avid enthusiast who wanted to save a little money, feel a sense of accomplishment and to learn a few things along the way. I technically paid nearly the same amount of money it would have cost me to send the unit to HTC for repair, however i've learned everything there is to know about my phone's hardware. I know which board does what and are extremely confident about fixing ANY hardware problem in the future.
If you have the time, patience, and truly want to become confident about the workings of your phone, then I highly recommend fixing it yourself. I've bought my parts for VERY cheap off of reputable ebay buyers. You can find EVERY single piece for your phone on Ebay. My LCD has 1 dead pixel, but I guess that's the risk you take when you buy really cheap parts.
Hope this helps.
Hello all,
I purchased an M1 Official Malata Case for my Gtab. I ordered it from it2steve, received it yesterday and it looks and fits great.
One problem...
It now seems that my screen is less responsive. I specifically notice it around the corners and around the right edge (same edge as home keys). Its becoming a problem with ADW as it is difficult to hit the onscreen button to open the program launcher and difficult to hit the Home button located at the top taskbar.
When I take the tablet out of the case there does not seem to be a problem. I have tried recalibrating using the took by gojimi and it does not seem to make a difference. I also have a Skinomi screen protector on, which I do feel had reduced the response already slightly, but it is now much worse with the case. I am also running Vegan 5.11.
Let me know what you think.
Maybe,Magnet will affect the capacitive touch screen.
I have noticed that the right hand side of my screen is a bit less sensitive than the left, but I had not associated that with the use of the case. (I have an m1 case as well). I also remember this being mentioned in another forum by a frequent contributor here.. (the lack of sensitivity, not its associated with the case).
It is a bit annoying to have to hit a button twice (and sometimes messes me up in angry birds) but it is not that severe in my case.
Dan
I too have chimed in on a couple of these posts adn I origionally thought it was the case as well, as it just seemed to be in the upper right hand corner. However I still have that issue and noticed last week (when I actually started typing more) that I was having an issue with anothe spot, right around my 'A' key.
I know that this has nothing to do with magnets or the edges of the case as now I'm playing around in the CLIP. I use Gojimi's calibration app but I'm personally leaning more to 'it doesn't like to wake up properly' as it seems to go away when I reboot?
I am pretty sure this is because of the case (to be precise, it is the part that wrap around and infront of the tablet)case.
I have an apad case and had the same problem. My tab has no problem outside of the case.
To solve the problem, I had to cut out the leather part that wrap around the tab and use a piece of velcro to keep the tab inside the case. I had no prolem now.
I am with you steve, that A key gets messed up.. and it does appear to be software, because it appears (my subjective opinion) that you can improve the sensitivity by doing simple things like hiding and exposing the keyboard. It also seems to be different depending on what you are doing.. for example, you would think that if it were a dead spot on the touchscreen, it would interfere with typing when you held it vertically, but it does not seem to.
BTW, is the clip case any good? I am debating whether to buy a dock from you
Dan
Maybe its just me but since i've received my M1... which i love. My touch screen seems too sensitive... i'm click stuff when its suppose to be scrolling... I'm going to say its not the case... Because my is doing the exact opposite.
on a side note when i originally got my gtab sensitivity was awful... i switched to the gingerbread rom and it seemed to fix itself.
All the more reason for making the switch once it pops into Beta!
I have one of the M1 cases and the Skinomi screen protector and just did some tests with and without the case. I can not discern any difference at all when the case is on.
The main problem is that your fingertip is less compatible than your finger pad due to calluses, etc... With the case on you cannot get a clean shot at the extreme most corners. You can only hit it with your fingertip. This will vary by person. A construction worker will have a harder time than a surgeon. When you take it out of the case, you are hitting the area square with your whole pad.
Is anybody else still experiencing this with the M1 case? I'm trying to decide between the M1, P3 and the Clip and decreased screen response would be a huge deal breaker for me.
clankfu said:
Is anybody else still experiencing this with the M1 case? I'm trying to decide between the M1, P3 and the Clip and decreased screen response would be a huge deal breaker for me.
Click to expand...
Click to collapse
Did you read my response? It is not the case.
TEK112 said:
Did you read my response? It is not the case.
Click to expand...
Click to collapse
Yea, I did but not sure I totally follow what you're saying. Why would a person use only fingertips with a case as opposed to their whole finger pad without one?
clankfu said:
Yea, I did but not sure I totally follow what you're saying. Why would a person use only fingertips with a case as opposed to their whole finger pad without one?
Click to expand...
Click to collapse
The case is not flush against the device. On the edges where it covers the screen there is an ever-so-slight upward curve (just the nature of dealing with this material). So, when you try to press the edge of the screen where it meets the edge of the case your finger is partially blocked by the case. That means that sometimes only the tip of your finger makes contact and sometimes that is not enough to trigger the action you desire. So, I think people were experiencing this occasional malfunction and blaming it on the case. The case is sort-of to blame, but it does not reduce screen sensitivity.
Do that make more sense?
TEK112 said:
The case is not flush against the device. On the edges where it covers the screen there is an ever-so-slight upward curve (just the nature of dealing with this material). So, when you try to press the edge of the screen where it meets the edge of the case your finger is partially blocked by the case. That means that sometimes only the tip of your finger makes contact and sometimes that is not enough to trigger the action you desire. So, I think people were experiencing this occasional malfunction and blaming it on the case. The case is sort-of to blame, but it does not reduce screen sensitivity.
Do that make more sense?
Click to expand...
Click to collapse
Yea, I think I got it. Thanks for the clarification.
Maybe I'll opt for the Clip since it doesn't seem to cover any of the screen.
clankfu said:
Yea, I think I got it. Thanks for the clarification.
Maybe I'll opt for the Clip since it doesn't seem to cover any of the screen.
Click to expand...
Click to collapse
I am looking to do the same, eventually. However, even if I didn't buy the M1, I still can't justify $50 for a case. That is almost the price of 2 M1's.
Yea, the price is making me think twice about it.
Hi all,
Today I suddenly noticed a click sound when putting my keyboard on the side and I found out that the case on the side of the hinge would come apart with little force.
It is easily replicated when you push the hinge push the hinge to the bottom and while holding the back case.
The problem is shown on the video below,
http://youtu.be/XS9zTEvvbzk
now, is it normal ? it seems like there are no screws holding that part together so it seems like it is bound to happen!
--------------------------------------
For the Fix
--------------------------------------
Just curious, how long have you had the dock? And how often do you connect and disconnect the prime from the dock?
My guess (and it's just a guess) is that the chassis on the edge uses snaps to keep the plate seams together. If this is true then it could be that something caused the snaps to break.
From what you're showing in the video, it definitely does not seem normal to me. I'm really hesitant to reproduce the issue with my own dock, so hopefully someone else in the forums whose had experience opening up the keyboard will provide some insight. In the meantime, if I were you, I would avoid any actions that would forcefully pry apart the chassis edge like that; it could aggravate the problem.
like i said, I barely need to use any force at all, just a a very small push.
I also figure out that the position of the hinge makes a difference as well.
If the hinge is in the "closed" position (imagine tablet docked with screen closed), it will not snap open.
it's when the hinge is opened up, the problem appears.
oO_SwooP_Oo said:
My guess (and it's just a guess) is that the chassis on the edge uses snaps to keep the plate seams together. If this is true then it could be that something caused the snaps to break.
From what you're showing in the video, it definitely does not seem normal to me. I'm really hesitant to reproduce the issue with my own dock, so hopefully someone else in the forums whose had experience opening up the keyboard will provide some insight. In the meantime, if I were you, I would avoid any actions that would forcefully pry apart the chassis edge like that; it could aggravate the problem.
Click to expand...
Click to collapse
Anyone ?
just a yes or no so I can try to return it !
babadudu said:
Anyone ?
just a yes or no so I can try to return it !
Click to expand...
Click to collapse
Two weeks ago I started having this same problem. The slightest pressure pops it right back together. I don't know that I'll bother to return it. I would assume there is a good chance they all do, and that it may have something to do with the way we insert it and remove it from the dock.
I just noticed this problem the other day. It does it about half way when opening or closing. Kinda like the pins of the hinge push it open just a little.
Sent from my Transformer Prime TF201 using XDA Premium HD app
looks like it's not just me then, i am baffled that they didn't design screws to keep it together......
I have the same issues. The dock is generally just not well made. the back panel is too flexible, it pops open at the edges, and Ive noticed the hinges have gotten looser, and have a dead spot now, where the tablet can flap back and forth, similar to most laptops.
Same problem here. Just went to the shop on saturday and they sent it to Asus. Don't know yet, what happens.
Bought the prime about 10 weeks ago, so they don't want to exchange it without sending in here in Germany. I just wish there'd be ASUS-stores like Apple stores, where this would have been handled more easily...
As someone who has taken their dock apart to see what makes it tick i know there are several hidden screws inside the dock part of the keyboard (under a black sticker, hard to see or find if your not looking) that help hold the hinge together. i found my screen protector was adding pressure on the dock and removed some of the material so everything fit better tho after doing what i did i dont really recommend it to others.
I too am rather unimpressed with the construction of the dock however im not going to worry too much about it, if it gets too flimsy for my liking ill just take it apart again and tighten things up again.
I had this once but i just pressed it toghether slightly and it never happened again.
Pileot could you make a small video or take pictures of the screws you did tighten to make it better?
This just happened to me last night and I'm very deeply saddened.
I take the tablet out of the dock about once every two days, Max. I've had the dock for 12 days now. C1OKA to start the S/N. Amethyst. Bought it from Amazon 3/2.
No screen protector, no added weight. I noticed it happened when I grabbed the dock with the tablet open by the Asus sticker on the keyboard, with my hands on both side of the touchpad.
Entire backend popped open, both hinges, and alongside the bacl under the tablet slide.
Im going to see if Amazon will take it back and exchange otherwise Asus will get my backend fixed.
Any ideas to those of you who have opened it that will keep it in place? i don't want to put tape on it. But i understand the weight of the tablet in the dock fully extended changes the center of gravity putting more pressure on the bottom of the dock and if it only has tabs that is the reason it is popping open.
No breaks cracks scratches damage of any kind.
I too have a clicking dock.
Got the same problem with mine. It's only a month old and it seems to be the way I hold it whilst docked. I tend to hold it one handed by the black sticker whilst opening it with my left hand. Gonna send it to asus for a repair as it seems the catch as snapped. ANOTHER desgin floor.
Is there not a screw underneath the rubber ?
Sent from my Transformer Prime TF201 using xda premium
My docking station was also having this issue. THere's screws under the rubber feet of the dock. I had to tighten both screws near the hinge down and that resolved the hinge splitting. Who knows if it'll happen again, but it's a pretty simple fix.
Hi,
No issues with the dock whatsoever, however I did notice that at a 45degree angle the prime just closes by itself. Not sure if it was like that from the beginning but it seems like opening and closing does loosen the hinges hold a bit.
Anyone experienced this?
Hinge FIX
I meant to write this a few weeks ago.
So I have a C3 keyboard....My C1 from Amazon worked great for 13 days...then it "popped" at the hinge and i was like...oh ****...
In the pictures you can see where it pops and the hinge came apart.
What I found was the little old chinese lady who put these together on that specific day must have had a serious case of Arthritis....when i examined underneath the rubber feet, both screws on both sides were completely unscrewed. I got the right sized 6 star driver, popped the hinge back together (especially underneath the hinge-release area in the middle of the keyboard), and screwed them in but didn't overtighten. I checked to make sure the dock wouldn't pop out again by placing tablet in and holding it on both sides of the trackpad and it didn't pop open. Voila! Put a dollup of rubber cement on pads, stuck them back on, and let it dry. Happy again! I hope this works for you guys.
edit: screws are Phillips head, not 6 star. opened rest of dock with 6 star (not necessary for this fix); sorry for confusion. PS super glue works well too if no rubber cement
Your images are dead.
And they're back.
Perfect, thank's a lot. I had the same problem, and your solution worked 100% for me as well.
My screen registers a touch from my S Pen when it is about a half inch away from the screen. This makes it difficult to take a note or to even just use the pen. From my understanding it is because the white tip is stuck in a little bit. I tried to contact Samsung and the only thing they told me to do was a factory reset or take it to an AT&T store. The problem is I go to school in Iowa and the closest AT&T store is 60 miles away. Any suggestions on fixing the S Pen?
You are correct in thinking the stylus tip is pushed in too far to create an "always on" effect. It is possible the stylus is simply defective, but there's one way to find out.
A lot of styluses come with a tool for removing and/or replacing the tip, as a stylus tip generally wears out after several years.
WHAT TO DO: Take a pair of tweezers and gently clamp down on the nub where it meets the stylus pen, then try to pull it out a little. DO NOT GRAB OR CLAMP THE NUB FROM THE TIP OR OTHERWISE SQUEEZE THE VERY TIP or you could misshape the tip and then it could scratch your screen over time. All you need to do is pull the nub out a little without accidentally compromising the tip that meets the screen.
After you pull the tip out a little (or all the way), push in gently but firm with your fingers to re-seat the nub.
Here's a video: http://www.youtube.com/watch?v=aertF9yb6n0
You can also try the aluminum tape method to resolve the screen interference issue, it's worked with my 2 s-pens that had the same symptom.
I dropped my S Pen in the toilet......
Had this problem after washing it until it dried. I do seem to still have the same problem occasionally though.
ny2k1012 said:
My screen registers a touch from my S Pen when it is about a half inch away from the screen. This makes it difficult to take a note or to even just use the pen. From my understanding it is because the white tip is stuck in a little bit. I tried to contact Samsung and the only thing they told me to do was a factory reset or take it to an AT&T store. The problem is I go to school in Iowa and the closest AT&T store is 60 miles away. Any suggestions on fixing the S Pen?
Click to expand...
Click to collapse
The tip doesn't move much, it's almost impossible to see unless you're looking at it pressing into a flat surface from the side. It might move .5 to 1mm at most.
Anyway, lots of threads on this already...