Hello.
Galaxy S2 I9100 ICS (LPQ) finds my Acer N551 bluetooth mouse, but when try to pair the phone asks for PIN (passcode), tryed 0000 , 1111 , 1234 .... but no succes!
When connecting the same mouse to laptop it doesn't ask for any PIN (passcode). But my phone don't allow me to hit OK without any symbol...
Not supported or what? Please help
I had this problem and tried several times and finally it worked with 0000.
try it more than 10 times.
no... I cant connect... 100 times tryied, restarted phone and mouse... maybe Acer have entered some code? Google didn't help me...
Did you reset the mouse? Look under the mouse or look at instructions papers.
Sent from my GT-I9100 using Tapatalk
there is no reset buton... only ON/OFF and SCAN button... and yes, i have switched ON/OFF several times and still the same problem
I dont have instructions for the mouse... it was gift with laptop
Did you press the scan button?
Does your phone say "Attention. Unable to establish communication with Acer N551"?
If it does, then it's all about the reset button.
I tried connecting my mouse without reseting it and it says that above. it maybe somewhere inside where the battery is.
Edit: Never mind googled your mouse and I can see it only has a scan button. I dont really no how to help here.
yes, I pres scan and Galaxy S2 finds it and trying to connect but asking for PIN... thanks for helping
someone else got this problem?
Just got my Razer ProClick mouse to work with SGS3.
At first SGS3 software always promted me for a PIN code and I know that my mouse has none. It wouldn't allow me to input a blanck code...
What I did was I connected a normal USB mouse (well, not really normal - a Cyborg RAT 7 lol) via a micro USB to USB cable then disconnected it. Then I simply tried pairing the Bluetooth mouse again and it didn't ask me for any PIN code! It just paired automatically. Must have picked up some mouse drivers via USB from another mouse, I don't know.... but it works flawlessly now.
Maybe someone will find it helpful...
Related
hi Guys ,
I come to you as a friend in need, I have a serious problem bwith the internet sharing on my ameo, as you can see I am on it now typing this, but I can't for the life of me get it to share the connection, I don't have a bluetooth dongle for it, so its usb all the way, here is what happens:
my pc running windows xp doesn't have a modem attached, only thing connected to it network wise is my playstation 3, I don't have the interet at home, hence wanting to use the ameo for the connection.
plug the ameo in, bink active sync goes on, leave it to sync, then I have tried a couple of things to no avail, just hitting internet sharing then, ameo dumps the usb connection then restarts it, nadda no I-net explorer, nothing pinging
I have tried starting the sharer before connection the usb lead nadda,
is there a set of setup needs I am blatantly missing? everyone seems to jus say they plug it in and it works, but I can't seem to get over this hurdle.
perhaps its simply a network setting on windows?
Can anyone thinks they can help suggest something I am doing wrong? even if it sounds obvious to u I might just be missing something simple
ps I am running pk dual touch
Many thanks in advance
Peter
hmm, just did a soft reset and now its working....hmm...
would still like to know what caused it, i turned off advanced usb features could that have made it start working?
whats that for anyways?
Peter
I get this sometimes, the ameo acts as a DHCP server and assigns the computer an IP addy, sometime however it does not assign an addy and so there can be no data transfer !! a simple reset of the ameo appears to sort it every time !!
i always found that the modem link, Wireless modem and Internet sharing applications always worked better if you activate them BEFORE connecting the USB cable.
Either that or the dodgy power supply on my USB hub is causing the problem!!! :-D
rhedgehog said:
i always found that the modem link, Wireless modem and Internet sharing applications always worked better if you activate them BEFORE connecting the USB cable.
Either that or the dodgy power supply on my USB hub is causing the problem!!! :-D
Click to expand...
Click to collapse
I completely agree, connecting the service before connecting the USB is much more reliable
PS did you guys know that we aren`t supposed to be able to do this, apparently to connect to your laptop you are supposed to use web and walk pro at £12.50 per month not just web and walk my mate can`t do this through his nokia cos it does not support internet connection sharing
well this problem happened to me today..what i did was right click my network places and disabled the LAN.coz win xp was choosing my LAN as default.once i disabled it it chose my athena and wala i got internet sharing.hth
hi there,
since froyo the A101IT is perfect for me. i was wondering if I can pair my speedlink bluetooth mouse which I use for my thinkpad but i'm not able to pair it with my tablet, because android always wants me to enter the bleutooth passcode. the speedlink mouse does not use a passcode, it pairs BT without a code.
how do I tell android to pair the bluetooth mouse without code? if I dont enter anything the OK button is greyed out ...
Did you try entering 0000 as a passcode?
Moved to general as not android development
gomork said:
Did you try entering 0000 as a passcode?
Click to expand...
Click to collapse
yea, and 1234, neither work as it tells me that the code is incorrect - I have a MS wireless BT mouse. I was frustrated, and glad to see im not alone.
did you try leaving the passcode blank - seems obvious - but that is what you are "TOLD" to do on Windows
- Stephen
sure i tried leaving it blank but you can't continue because the button is grayed out.
i also tried 0000 and 1234 of course but the 101 just tells me, that the code is incorrect.
as soon as you enter something in the input field the button is clickable. if i delete the entered code the button keeps clickable for a second, but if i press it quick, it still says incorrect code i thought there is an app for everything ....
@Mr. Clown
sorry for that
other default i have seen is 1111
- Stephen
no chance... my mouse requests a blank code ...
I have the same problem on my at&t streak running official froyo 340 . My bluetake bt510 white bluetooth mouse requires no passkey but the dell streak always asks for one I also tried 0000, 1234 and many others with no pairing success but I think I found the answer well sort of not really well because on my at&t samsung captivate running froyo also (ji6) it automatically pairs with no pop up to enter pin or passkey obviously theres a diference but I highly doubt its hardware related but this info in the right hands should help all of us no passkey bluetooth pairers lol...
Any solution for this?
Is this really something that no one can solve? Sorry for bumping old post but I'm also having this problem with Interlink Bluetooth Mouse + Galaxy Tab 10.1. It does not give me the option to choose no passkey; however, the mouse *requires* no passkey.
Anyone find out yet? I have the same issue?
Just got my Razer ProClick mouse to work with SGS3.
At first SGS3 software always promted me for a PIN code and I know that my mouse has none. It wouldn't allow me to input a blanck code...
What I did was I connected a normal USB mouse (well, not really normal - a Cyborg RAT 7 lol) via a micro USB to USB cable then disconnected it. Then I simply tried pairing the Bluetooth mouse again and it didn't ask me for any PIN code! It just paired automatically. Must have picked up some mouse drivers via USB from another mouse, I don't know.... but it works flawlessly now.
Maybe someone will find it helpful...
If i remember you can enter 0000 or 1234 try those codes. Check archos fans forum mentioned the accessories section.
Thinkpad bt mouse pair problem UBUNTU
Hi guys.
I've got Thinkpad Bluetooth mouse(0A36407), IBM T43, Ubuntu 13.04 and I couldn't pair this mouse with my laptop.
With W-7 it runs perfectly.
~$ hcitool dev
Devices:
hci0 00:0E:9B97:84
~$ hcitool scan
Scanning ...
F0:65D:68:0E:C5 ThinkPad Bluetooth Laser Mouse
~$ sudo bluez-simple-agent hci0 F0:65D:68:0E:C5
RequestPinCode (/org/bluez/814/hci0/dev_F0_65_DD_68_0E_C5)
Enter PIN Code:
and I dont have any PIN code.
Im really disappointed what shall I do
any ideas?
Thank you in advance
Try 0000 or 1234
Try this https://code.google.com/p/android/issues/detail?id=26041#c33
Hey! Just found a solution!!! https://play.google.com/store/apps/details?id=com.jpn.frontia.waka.Bluetooth
Worked on my Samsung N7000 and BT Genius mouse:
1.Install app and open it
2.Make BT devices search and find your mouse
3.Push single button on the top of application screen
4.Little message apperes below like "ChineseSymbols!"
5.Turn your BT off and on
6. Take a look at you paired BT devices
7. PROFIT!!!
Click to expand...
Click to collapse
got this problem with my Sony tablet s
it says paired to the device but not connected
no matter what i do it still doesn't connect to the device ,ive tried my pc
my galaxy s 2
had to unpair them again and again but still no luck
have also tried to turn the WiFi off but stil same problem
has any got the same problem
any comments
It would probably be helpful to know what devices specifically you're trying to pair and which side you're using to start the connection. Try and be as specific as possible.
im trying to to connect my pc running vista with it and other way areound it pairs but cant connect
.same with my galaxy s2 running ics
it recognises the pc and sends a code for it to pair but then it says paired but not connected in the tablet s
any comments
thanks
Same problem
If the combo of PC <---> Sony Tablet
and of PC <---> Galaxy S2
gets the same result, then it's probably the PC.
If that's not what you're saying then go into the Bluetooth Devices section of your Vista PC and see if the Sony is appearing there. If so, right click on it and choose Connect. If it's not listed, then you haven't paired it right.
Sorted after the ics update
Sent from my GT-I9100 using Tapatalk
Hey guys, I have been looking for a way to control my CM 10.1 DNA through my PC (Windows XP SP3) and have tried a few things with no luck. I got android screencast working, but found that I couldn't operate the phone through the PC (and it was very laggy). If I might be missing something here, then let me know.
I also tried using apps like 3CX DroidDesktop and when I attempt to connect from my PC I get errors. I'll enter in the IP and port and I usually get an error that says my phone refused the connection. I've tried Real VNC, Tight VNC, and even just the browser. I'm a total noob at this so I apologize if this question has already been asked or something. And yes the phone and laptop are both connected to the same Wi-Fi connection.
Thanks for any and all help guys!
Edit: So I've gotten it to work through USB, and realvnc but I do not have the ability to control with the keyboard or mouse
Hi all,
I've an Artes Q812 Tablet and i want to use my Usb Wireless Modem (TP-Link wn-7200nd) with it. I've searched the web but couldnt fint any ways to run it. When i connect the modem to the tablet, nothing happens. Cannot see it in the settings. Also there is no connected notice when i plug in it.
Waiting for your helps.
Thnx.