hi Guys ,
I come to you as a friend in need, I have a serious problem bwith the internet sharing on my ameo, as you can see I am on it now typing this, but I can't for the life of me get it to share the connection, I don't have a bluetooth dongle for it, so its usb all the way, here is what happens:
my pc running windows xp doesn't have a modem attached, only thing connected to it network wise is my playstation 3, I don't have the interet at home, hence wanting to use the ameo for the connection.
plug the ameo in, bink active sync goes on, leave it to sync, then I have tried a couple of things to no avail, just hitting internet sharing then, ameo dumps the usb connection then restarts it, nadda no I-net explorer, nothing pinging
I have tried starting the sharer before connection the usb lead nadda,
is there a set of setup needs I am blatantly missing? everyone seems to jus say they plug it in and it works, but I can't seem to get over this hurdle.
perhaps its simply a network setting on windows?
Can anyone thinks they can help suggest something I am doing wrong? even if it sounds obvious to u I might just be missing something simple
ps I am running pk dual touch
Many thanks in advance
Peter
hmm, just did a soft reset and now its working....hmm...
would still like to know what caused it, i turned off advanced usb features could that have made it start working?
whats that for anyways?
Peter
I get this sometimes, the ameo acts as a DHCP server and assigns the computer an IP addy, sometime however it does not assign an addy and so there can be no data transfer !! a simple reset of the ameo appears to sort it every time !!
i always found that the modem link, Wireless modem and Internet sharing applications always worked better if you activate them BEFORE connecting the USB cable.
Either that or the dodgy power supply on my USB hub is causing the problem!!! :-D
rhedgehog said:
i always found that the modem link, Wireless modem and Internet sharing applications always worked better if you activate them BEFORE connecting the USB cable.
Either that or the dodgy power supply on my USB hub is causing the problem!!! :-D
Click to expand...
Click to collapse
I completely agree, connecting the service before connecting the USB is much more reliable
PS did you guys know that we aren`t supposed to be able to do this, apparently to connect to your laptop you are supposed to use web and walk pro at £12.50 per month not just web and walk my mate can`t do this through his nokia cos it does not support internet connection sharing
well this problem happened to me today..what i did was right click my network places and disabled the LAN.coz win xp was choosing my LAN as default.once i disabled it it chose my athena and wala i got internet sharing.hth
Related
Hello all, I have the xv6800, dcd rom 3.3.4 and activesync and internet sharing setup on Windows just fine. However, I have recently gotten a MAC, and I have not been able to get the internet sharing to work via BT or USB. I can understand BT cause I was never able to get it set up on windows either. I don't mind the USB connection, it's alwasy been more stable and a snap to set up with the ROM. However I can't get it working on the MAC. Is there a driver or app that needs to be installed on the mac side? The only think I remember doing on the WIN side is installing the modem driver.
On Mac, I have installed Missing Sync installed and I have been able to attach and sync my winmo phone without issue, so I know I have connection. but I cannot get the internet sharing to work. I checked out the verizon site and they state that they do not make a modem driver for the mac os.
I should also mention that I have winXP set up on the mac thru VMware, but I have been unsuccessful getting this to work the way my original windows laptop is setup. I dont want to set it up that way anyway if I can avoid it.
I am curious if anyone has this working via USB?? I apologize if this has been covered elsewhere. I couldn't find anything related and certainly not specific to this ROM.
I did find this, http://www.keithtastic.com/post/3997...-to-sprint-htc, but it states to buy an app called USB Modem program from www.mobile-stream.com. but wouldnt the ISC app on the dcd rom provid the same functionality?
Thanks for any/all help
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
bmorrisj said:
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
Click to expand...
Click to collapse
then just use internet sharing form the phone as normal?
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
goon55: Like you, I always used a VM workaround to tether back when I had a Mac. I haven't tried this, but I've heard Syncmate allows Internet Sharing on Mac systems. Good luck!
I have no issues connecting my macbook for my 6800.
After you set it up like the other poster told you to, you should have a phone icon next to the bluetooth icon at the top right of the screen. click the phone icon then "connect bluetooth".
goon55 said:
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
Click to expand...
Click to collapse
also when setting up the BT relationship, make sure you select the network services (i believe, there are one or two services you can check)...on the phone make sure you start BT and internet sharing (with BT selected) and when you go to the BT menu on the mac, your phone name should be under "devices", expand your phone name and select connect to network.
just trying to clarify a bit.
i had it
i had bt working for a bit and then was disconnected abruptly.
after deleting the profiles of the pairings on both the titan and the mac, it still wont share the connection although the phone will be connected in bt system prefrence pane, (where you select devices).
when it worked, i would select the phone in the device select, and underneath clicking on the gear to a menu option to 'connect to network'
it worked that wayfor 3 mins.
also, when i configure the device, if i set the phone to internet share while the mac is discovering the services, i get two options to select instead of just one:
access the internet
use device as network port.
edit: got it, apple talk active
best software you can use is http://www.wmwifirouter.com/ it works over BT or wifi and uses your phone's regular data access address which means you don't get tethering charges. NOTE I use the free version, and I have tried the tiral and although it does work, my mogul does not seem to like it and has little quirks after I install it (wifi turns on when I reset even if the switch is off, I don't why but its there).
Hi everyone, I've been trying to use my Windows Mobile phone as a modem for the Macbook, but so far I only see people being able to connect via BT. Problem with that for me is that BT drains both my laptop and phone battery quicker, so I'm trying to find a solution to connect via USB instead. Has anyone been able to surf on their Mac using their Windows Mobile phone as a modem via USB cable?
What you want is Mobile Stream USB Modem for Windows. Windows here being Windows Mobile, it works with my Mac.
Once you set it up, your phone is seen as a USB Modem and you dial from the Mac to this port. There is a free trial, take time to test it, read the forums, I had some initial issues to get it work right, but now it is good, I ended up purchasing it.
Tried BT sharing too, but too instable and drops. Tried the WiFi sharing, but eats battery...
Only downside: as you dial the data modem, it will fail if it is already in use (background email checking on your phone...). I have to disconnect the data connection on the phone to be able to dial from the Mac, otherwise it reports Port Busy.
Thanks for the recommendation, will try it out. Any other solutions in the meantime to connect and share the Internet connection from my Windows Mobile phone to Mac via USB?
I had the same problem, and tried everything recommended in the thread - no dice. I ended up just installing WMWifiRouter and that works like a champ.
http://networkjew.com/2009/03/30/tether-windows-mobile-phone-mac/
This is for cingular, but I'm sure this can be attempted no matter what the provider.
I've been looking for a solution as well, and have yet to find one for USB Internet Sharing on a Mac. I currently just use Bluetooth with an external charger on the phone and laptop since it'll eat the battery of both quickly.
I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?
Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.
Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW
I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.
So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.
I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!
For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.
SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.
RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.
I try to share my sprint touch pro's internet to pc by Internet shareing in conn mgr.When I click connect ,it try to connect ,then the status show check usb cable connection.And then report error ,and ask me to check my username and password.But I just can connect to internet in my phone.Anybody got ideas for this?Thanks!
1 - Do you connect your phone to the internet using your data plan?
2 - Do you tell Internet Sharing to use your Sprint connection and USB cable?
3 - When you get the message to check your USB connection, do you make sure your phone is connected to the PC with a USB cable?
1、Yes
2、How to tell Internet Shareing to use Sprint connetion?
3、Yes,I have connected the pc and my phone with usb cable already.
Now,I do active data connection by hand through conn mgr, and the status now could be waiting for network.but when I try access internet from pc the error still exists and cannot connect
ICS on
vincentchan said:
I try to share my sprint touch pro's internet to pc by Internet sharing in conn mgr.When I click connect ,it try to connect ,then the status show check usb cable connection.And then report error ,and ask me to check my username and password.But I just can connect to internet in my phone.Anybody got ideas for this?Thanks!
Click to expand...
Click to collapse
So, I've noticed that flashing with the recent update (http://www.htc.com/us/SupportDownload.aspx?p_id=195&cat=2&dl_id=683) from HTC for Sprint Touch Pro kills the hack* used to circumvent Phone As Modem. The steps used for the Touch Pro 2 do not work, either: there is no CM_Guardian or HTC_CM_Guardian in any of the registry (there is a HTC_CM_Guardian process running, though and the file is in the Windows root dir, protected of course).
*Entails deleting the registry key: HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings\ForceCellConnection
Thanks dwellman.It works now.
BTW,what is the Sprint Touch Pro MR?
I meant to say: has anyone found a work around-- short of flashng a custom ROM or rolling back-- to the problem? The problem being that there seems to be no way to tether the Touch Pro with the new updte from HTC.
[UPDATE]
Aha! See, juggling multiple forums is taking it's toll, but I found what I was looking for: http://forum.ppcgeeks.com/showthread.php?t=88014.
Hopefully this will work. I haven't tested it yet, but I wanted to go ahead and put this in as well as flesh out the post to make the indexers find it better-- I've been searching for about 5 days.
Most of the problem with the Internet Sharing connection is because the Internet connection Sharing in the Windows Device Manager is disable. Press Enable button and problem solved.
If the internet is not connected by any reason verify always in Device manager.
how does it work? im trying this for a long and for me is almost impossible:
my tg01 seems to work with it but in fact there is no connection.
Thanks in advance
papoble said:
how does it work? im trying this for a long and for me is almost impossible:
my tg01 seems to work with it but in fact there is no connection.
Thanks in advance
Click to expand...
Click to collapse
Connect it to your PC with a USB cable, and make sure the ActiveSync partnership is working (ie, you can browse the phone from within My Computer).
Now head into the Start Menu on your TG01 and click "Internet Sharing". Make sure the PC Connection is set to USB, and the Network Connection is set to your Mobile Network. Hit the Connect button at the bottom.
That's it
Thanks, for your time, but is the way to connect with pc wireless i meant (and i dont want connect bluetooth) so i just wanna know the way to use my tg01 as wifi router.
perhaps with the program called 'wifi router' ?
http://forum.xda-developers.com/showthread.php?p=4170499
google might help you out finding another program if that doesn't work. but that's not for free.
best regards
papoble said:
Thanks, for your time, but is the way to connect with pc wireless i meant (and i dont want connect bluetooth) so i just wanna know the way to use my tg01 as wifi router.
Click to expand...
Click to collapse
Then I think you need a seperate application - http://global.wmwifirouter.com/consumer/ should do the trick !
Wifi router software
Wifi router software
Hello guys,
I'm sorry if the reply to my question was already posted by I was unable to find it here or through google search.
I'm new to the Android world so this might be very easy to achieve although I was unable to find it.
I'm trying to connect my SGS2 stock KE7 to the internet through my PC. I wanted to connect the phone with the data cable to a usb port on my laptop and then route all the traffic. I went through the options but couldn't find anythign that could achieve this.
Can someone, please, give me some pointers?
Thanks in advance for your help.
Just go in to wi-fi settings and set up a hotspot. Your phone now works as a "wireless router/modem" and your computer should detect your wi-fi hotspot created by the phone
I thought Wifi/usb Tethering was to allow other devices to connect to the internet through your phone.
computer -> phone -> internet
And I want to achieve the opposite, Connecting to the internet with my phone by going through a laptop/workstation.
phone -> computer -> internet
tosheeba said:
I thought Wifi/usb Tethering was to allow other devices to connect to the internet through your phone.
computer -> phone -> internet
And I want to achieve the opposite, Connecting to the internet with my phone by going through a laptop/workstation.
phone -> computer -> internet
Click to expand...
Click to collapse
This is a bit off-topic, and I may have misunderstood your question, but this might be what you are looking to do -
1. Setup your computer in wifi adhoc sharing mode, so that any other wireless device can find that network.
2. Use your phone as the wifi device to connect to that network.
This is pretty easy - just setup a wifi network.
Many videos available on youtube -
Again, this is just one way of doing what I think you want to do-
http://www.youtube.com/watch?v=ADpHIeBSFUk
What if wireless is not available?
Is it possible to reverse tether a phone to use a PC's internet connection via a USB cable?
monkley said:
What if wireless is not available?
Is it possible to reverse tether a phone to use a PC's internet connection via a USB cable?
Click to expand...
Click to collapse
Don't think that you can use the network over the usb cable it is not designed for that, may be someone else may know a bit more.
Theoretically a proxy agent app on pc should be able to do what you want above, over the usb cable, but it is better to use a wireless modem instead.
androidsos said:
Don't think that you can use the network over the usb cable it is not designed for that, may be someone else may know a bit more.
Theoretically a proxy agent app on pc should be able to do what you want above, over the usb cable, but it is better to use a wireless modem instead.
Click to expand...
Click to collapse
Ok, thanks for the reply. Unfortunately I often find myself in the situation where I do not have phone signal or wireless available :-/
Maybe I should invest in a wireless access point to carry around with me!
Yeah, it's a pity. There are a couple of scenarios where this would be useful for me.
Thanks anyway for replying to my question.
AFAIK this a HTC sense only feature as i remember having this on my HTC desire
What I use is an Edimax Wireless USB adapter - EW-7711UAn. The hardware works really well, the software works well once it is set-up, but configuring XP to share its network connection through this is a bit tricky
This may help, I am sure there is similar for Vista Windows 7 around on the Internet
http://www.labnol.org/software/ad-hoc-wireless-network-in-windows-xp/11486/
This might help you out guys!
Heres the explanation of how to do it (sorry it's in Portuguese, but google translator will do the trick!
http://pplware.sapo.pt/smartphones/android/internet-no-android-a-partir-do-pc-sim-possvel/