Hi all,
I have a - stupid - question about kernels used by the DSC Roms.
The should be freq mini = 128, but is it possible to set this mini freq CPU without using a CPU Tuner program ? i'm using CPU Tuner to enable this mini freq. but this program like other ones use about 20 mo of ram, seems quite a lot of ram used to gain some battery life...
JB
DSC ROM has CPU Master Free included.
Besides, you can edit /etc/init.streak.post_boot.sh
Thanks for the answer.
I uninstalled CPU master Free a long time ago, and even when i upgraded to 0.74 CPU Master was not installed.
But It's not an affair, i prefer CPU Tuner.
I'll try anyway to edit /etc/init.streak.post_boot.sh to see if i can use it without CPU Tuner.
JB
Edit : seems to work if i believe on System panel ! thanks a lot !
Related
Hi,
at once, my english is very bad.
I have a problem with the Elelinux-7.1.0-RC1-Hero-v3.0.
The Status bar is very laggy and the launcher pro app drawer too :'( What can i Do.? thanks.!
wipe and clear everything, flash again!
Tried to overclock? I've used this app https://market.android.com/details?id=com.jrummy.droidx.overclock&feature=search_result and set the CPU to min 264 / max 672 governor: smartass for profile: screen on.
Be careful with overclocking, as with a computer electronic components doesn't like it
Don't use separate app to overclock Ele Rom. Go to Settings - Cyanogenmod Settings - Performance and adjust CPU clock there. Do it incrementally, though, for safety. I'm running 164/710 quite happily.
I should add: Smartass governor. Seems the cleverest, therefore saving a little battery...
flyxer said:
Hi,
at once, my english is very bad.
I have a problem with the Elelinux-7.1.0-RC1-Hero-v3.0.
The Status bar is very laggy and the launcher pro app drawer too :'( What can i Do.? thanks.!
Click to expand...
Click to collapse
For information v3.1 (based on Android 2.3.5) has been released, maybe it will fix your problem
Update to Eli's latest release and overclock is your best bet. I have my processor clocked at 264/748 SmartAss at the minute and it runs smooth as very smooth.
Also, as a note, I use SetCPU and have no problems.
Hi, first of all i would like to know if there is any uncomplicated way to overclock the gpu (and cpu) of the x10i (adreno 200) or is it even possiple?
My x10i is rooted, xrecovery is installed as well as the fps uncap (54 fps). (but i dont want to unlock the bootloader!)
Also i would like to be able to set the cpu frequency as i want it to be, which (free) app would you recommend, should be stable and reliable (should maybe also show the current frequency)?
If thats possible, it wouldnt be bad being able to set the gpu speed/frequency as well.
Until now I've found cpu tuner and antutu cpu master...
Thanks in advance guys
First u will need a custom kernel that supports OC, then u can use no frills cpu master (free from market) to overclock
OK thanks, but as i read in some other threads you cant really go much past 1100 mhz (cpu) because it will get unstable, so i just want to set the cpu frequency i want (so just underclocking or permanently stick it to 998mhz).
Which (free) app is best for this?
Raex said:
OK thanks, but as i read in some other threads you cant really go much past 1100 mhz (cpu) because it will get unstable, so i just want to set the cpu frequency i want (so just underclocking or permanently stick it to 998mhz).
Which (free) app is best for this?
Click to expand...
Click to collapse
Dont know about free but if youre willing to spend a little, SetCpu from the market works wonders
Sent from my X10i using xda premium
No frills cpu is free
So then i'm gonna try no-frills cpu control, but why is it better than antutu cpu master (free), or is it even better(?), both of them got an average of about 4,5 stars....
I've also seen that antutu cpu master (free) has advanced options with gpu control, but i dont really understand what can be done in these settings....there are no listed frequencies or anything.....(https://market.android.com/details?id=com.antutu.CpuMasterFree&hl=de)
I would say that other cpu apps may have more options but no frills is simple and elegant.As a normal user we dont need more than this.
Just my opinion
Works perfectly and has a nice statistic about the frequency(s) used
If u search xda forum properly u can find set CPU for free as a treat for xda members from the dev.
Sent from my X10 using XDA
Thanks but i'm happy with no-frills cpu control at the moment, has everything i need:
- full control over the current frequency
- widget showing the current frequency
- statistic about frequency(s) used (total and last 5 seconds)
- option to set my desired frequency right after booting
So for now thats all i need, maybe when i want to overclock it a bit (future, not now), then i'll use setcpu.
i am on mean rom GB v45 + anthrax kernel included in it.The problem is when i play 3D game it run on 1.5 ghz and make my phone overheat even with simple 3D game like paper monster so i want downlclock it
using set cpu latest version(2.0.3.2 and 3.0.7 version)wth max 1.2 ghz and min 194 mhz but i see in widget it back to max 1.5 ghz sometimes
using system tuner pro, but it make my phone restart maybe there's conflict with the rom
using cpu antutu master pro , i cant adjust voltage but successly adjust the min and max clock speed eventough the min clock speed always going up same as max clock speed in antutu setting . Installing system tuner pro after adjusting antutu master and the cpu clock is the same as my setting on antutu cpu master pro.
if you have any experiece please share
thanx
amdultra said:
i am on mean rom GB v45 + anthrax kernel included in it.The problem is when i play 3D game it run on 1.5 ghz and make my phone overheat even with simple 3D game like paper monster so i want downlclock it
using set cpu latest version(2.0.3.2 and 3.0.7 version)wth max 1.2 ghz and min 194 mhz but i see in widget it back to max 1.5 ghz sometimes
using system tuner pro, but it make my phone restart maybe there's conflict with the rom
using cpu antutu master pro , i cant adjust voltage but successly adjust the min and max clock speed eventough the min clock speed always going up same as max clock speed in antutu setting . Installing system tuner pro after adjusting antutu master and the cpu clock is the same as my setting on antutu cpu master pro.
if you have any experiece please share
thanx
Click to expand...
Click to collapse
First of all, the kernel in MeanROM GB 4.5 is a dodava kernel. The settings for OC/UV are controlled by parameters in the postboot script, not with apps like SetCPU and System Tuner. If you try to set them with those apps, they will be reset when the phone goes to sleep and wakes up again. There are some instructions for setting up the parameters in this post within the MeanROM GB thread, and the script has more information in the comments.
This post by mpgrimm2 is a good guide to setting up the postboot script parameters, including some recommended values. You might be better off posting further questions in the MeanROM GB thread if they are related to that ROM because there are still a lot of people using it that monitor the thread.
ramjet73
thank you very much for explanation
hello to all, i noticed that my redmi note 3 pro KATE ( i am on globerom 8.1.1.0 stable) has the minimum clock for big cluster, setted at 883mhz , and little cluster 691mhz BUT i can select on kernel adiutor the min freq of 400/ 400 mhz.
QUESTION 1 about freqNow i am with L speed app , and applied battery profile, but i don't understand why it does not automatically set the value to the MINIMUM POSSIBLE. Is there a reason?
Is there any CON to set the minimum cloto to cpu at 400mhz? i don't understand why xiaomi.eu and globerom modders did not set this freq to lowest possible, is it maube harmfull for the device?
should i have to set it by myself in kernel adiutor app? please help me to use this app, i just suppose i must apply 400mh setting, THEN choose to apply to boot ( there is a toggle).
What if i set at 400 and NOT toggle it?
QUESTION 2 about differences L speed and gov tuner flashable zip.I am sorry to admit that i'm not such skilled into android development and i have difficulties to understand terms like init.d or script meanings.....
For what i know i found pre installedon globerom the gov-tuner project zip file, then i discovered that that optimizations to the GOVERNOR, are also incorporated in another app called L speed. so i uninstalled gov tuner in this way:
1) entered into console, and entered the letter to disable gov tuner. ok,
2)then rebooted into recovery and flashed the zip for uninstaller.
DELETED! and i can say with that mod my battery life was really good almost perfect.
then i installed L speed, but still being a nice app with lots of features and explanatiions for EACH of them, i just setted overall provile to BATTERY, and cheched some other tweaks....EXCLUDING THE ONES that are described as battery wasting.
Then i asked to officiial thread if i have to reboot to apply, they said no... but it's PREFERABLE. OK I REBOOT.
by now i have worse battery life ( much worse) and i can't understand why.
I tested with console if gov tuner is still present, but NO. so there shoudn't be any conflict at all
sorry....if this 2nd question is THE BIGGEST ONE, but i really need to read someone suggestion and a simple explanation to understand if it's better l speed or gov tuner to me.
L speed seems very much powerful and can mod much more things... but is it safe? maybe there are so much options and i choosed 1 or 2 too much, and now i see bad battery life. but it's nearly impossible what is the option that causes me this.
And last important thing.... is it the same thing to implement these script or optimizations at the boot (i think gov tuner do it so) or after the boot like do L speed? ( i noticed into app a setting to choose 10 seconds after boot to apply scripts, in fact i see after each boot a notification about these applied scritps)
Hello,
sorry I can only answer question 1 since I dont use Lspeed.
Set it to 400MhZ Dude!
Doesnt harm your device, its still not laggy or anything.
Set apply on boot option and you`ll be golden.
RN3 has awesome battery life just stock. If you want more, install skynet. (was on xda, moved to google+)
There is even a guide somewhere out there for setting it to 400Mhz.
Cheers mate
I am Using honor 8 frd L02 emui 5.0.1....
And device is Rooted ...
I want the maximum possible frequency while gaming...and maximum allowed is 2.3ghz ... Kernel auditor works fine in setting up maximum performance at 2.3ghz(on demand as well as performance)... But after few minutes frequency sets to 1.8ghz or 1.5ghz... It maybe due to emui... But I don't want to switch to custom ROM as there are problems like camera or calling....
So what is the solution to overclocking the CPU....
I am thinking about using open kernel tweaks like AKT(advance kernel tweaks), or LKT(legendary kernel tweaks)... Will it solve my problem... Or is there any other solution ???