Hi,
at once, my english is very bad.
I have a problem with the Elelinux-7.1.0-RC1-Hero-v3.0.
The Status bar is very laggy and the launcher pro app drawer too :'( What can i Do.? thanks.!
wipe and clear everything, flash again!
Tried to overclock? I've used this app https://market.android.com/details?id=com.jrummy.droidx.overclock&feature=search_result and set the CPU to min 264 / max 672 governor: smartass for profile: screen on.
Be careful with overclocking, as with a computer electronic components doesn't like it
Don't use separate app to overclock Ele Rom. Go to Settings - Cyanogenmod Settings - Performance and adjust CPU clock there. Do it incrementally, though, for safety. I'm running 164/710 quite happily.
I should add: Smartass governor. Seems the cleverest, therefore saving a little battery...
flyxer said:
Hi,
at once, my english is very bad.
I have a problem with the Elelinux-7.1.0-RC1-Hero-v3.0.
The Status bar is very laggy and the launcher pro app drawer too :'( What can i Do.? thanks.!
Click to expand...
Click to collapse
For information v3.1 (based on Android 2.3.5) has been released, maybe it will fix your problem
Update to Eli's latest release and overclock is your best bet. I have my processor clocked at 264/748 SmartAss at the minute and it runs smooth as very smooth.
Also, as a note, I use SetCPU and have no problems.
Related
Hi, i have strange problem. Most time my x10 works just perfect, Fast&Stable, no lag in games etc. but sometimes it starts to lag SO MUCH that i have to reboot.
After reboot it works fine again. Lag appears only in games or advanced-graphics apps.
Currently im using DiXperia 3 ROM and DoomKernel v6 (min 192 MHz max 998MHz). Im using OnDemand governor, which one do you recommend?
Oxynium said:
Hi, i have strange problem. Most time my x10 works just perfect, Fast&Stable, no lag in games etc. but sometimes it starts to lag SO MUCH that i have to reboot.
After reboot it works fine again. Lag appears only in games or advanced-graphics apps.
Currently im using DiXperia 3 ROM and DoomKernel v6 (min 192 MHz max 998MHz). Im using OnDemand governor, which one do you recommend?
Click to expand...
Click to collapse
Dixperia 3 is a very quick and stable Rom but it does seem to load up sometimes, especially Maps and ADW. I just use "fast reboot" when there is any sign of slowdown. I use 245/1119 on interactiveX as my phone won't go into deep sleep with OnDemand.
tal333
Might be low RAM
Sent from my X10a using xda premium
TAL333 said:
Dixperia 3 is a very quick and stable Rom but it does seem to load up sometimes, especially Maps and ADW. I just use "fast reboot" when there is any sign of slowdown. I use 245/1119 on interactiveX as my phone won't go into deep sleep with OnDemand.
tal333
Click to expand...
Click to collapse
I don't have Google Maps or ADW Launcher. Maybe it's just too high amount of apps.
There are rumors about DiXperia 4 200-210 MB RAM and even more speed.
Hey guys. I'm looking for an app that is similar to SetCPU, but I can set my CPU overclock/underclock settings specifically for different applications. Meaning, I could have my Mantano Reader always at 300MHz but have Modern Combat 3 always at 1300MHz.
Anyone know of how to do this? I'm trying to maximize my battery. I'm on CM7.2 (Mirage Kang) and I have V6 but I'm still seeing some depressing battery loss just browsing with Wi-Fi on.
That's what your governor is for, it up clocks and/or down clocks the CPU according to what type of task is being performed.
joenathane said:
That's what your governor is for, it up clocks and/or down clocks the CPU according to what type of task is being performed.
Click to expand...
Click to collapse
Ah, I see. I just got my Nook Color around a week ago and I've installed Mirage Kang so I am extremely new to all this.
Could you point me in the right direction? What app for this would you suggest, SetCPU or something like Tasker?
Its under cyanogen mod settings in the settings menu.
Setcpu won't work with CM7.
gallahad2000 said:
Its under cyanogen mod settings in the settings menu.
Setcpu won't work with CM7.
Click to expand...
Click to collapse
I know of those settings (along with Nook Tweaks). What I was looking for was setting specific CPU settings for different apps. Like,
Mantano Reader : Always 300MHz
Andy-83 Calculator : Always 300MHz
Modern Combat 3 : Always 1300MHz
etc, etc, etc.
Specific settings for each app, not just generalized overclock/underclock settings for all apps.
(I hope I am explaining this well enough.)
I think you can set up rules such as those with Tasker.
tjw345 said:
I know of those settings (along with Nook Tweaks). What I was looking for was setting specific CPU settings for different apps. Like,
Mantano Reader : Always 300MHz
Andy-83 Calculator : Always 300MHz
Modern Combat 3 : Always 1300MHz
etc, etc, etc.
Specific settings for each app, not just generalized overclock/underclock settings for all apps.
(I hope I am explaining this well enough.)
Click to expand...
Click to collapse
There is no need to set it for each app. Just set it to on demand and the governor will automatically adjust the clock speed as it is needed.
Sent from space
Ok guys this is my first overclocking app, including the following features:
Simple management of Processor Frequencies (Min and max)
Governors management with a gesture (Swipe down)
IO Schedulers management with a gesture (Swipe up) *new
Save as safe feature, wich means you have less chance to make some excesive overclock damage
Run at boot option
Visualization Settings
Requirements:
Android 2.2+
Kernel support for overclocking
Rooted device
Features planned:
-Profiles and notifications
-Voltage control (if kernel supports)
-AutoSet best config *new
Links at second post.
Some screenshots
02/04/2012 - v1.2
Fixed some fc while switching frequences on SeekBar
Fixed wrong sort of frequencies (now always from lesser to greater)
New ICS UI (only for ICS devices)
Almost done time / temperature profiles
Changed write method to command echo "frequency" > /sys/blah...
Current ram usage - 5MB, size 45.9KB
24/01/2012 - v1.1
Profiles implemented
Save as safe feature is better now (long click to show current saved)
Profiles (for now only battery level)
Notification system (also customizable led color settings*)
Independent performance settings submenu (for now just "pi" test, wich means a load test calculating pi number on loops)
Bugfixes and improvements
Current ram usage - 2.3MB, size 45.4KB
*This feature may not work on some devices
20/01/2012 - v1.0
First release
Official List of Current Working Devices:
Samsung Galaxy S / S2 - Fully working
Sony Ericsson Xperia Family - Fully working
Huawei U8800 (IDEOS x5) - Fully working
Milestone 1 - Fully working
LG Optimus One / 2X - Fully working
LG GT540 - Fully working
Which kernel is better for this app??
icerebro said:
Which kernel is better for this app??
Click to expand...
Click to collapse
That doesn't depends on kernel, app will adapt on any kernel if it support overclock (all kernels in mini and mini pro does support oc)
I've tested and works perfectly...!
I used with Naa Kernel and Rom
As soon as I set vlaue 768 and apply phone reboots. I this just me?
hey!! D4.
nice to see u again in this forum. thank you
Banwell13 said:
As soon as I set vlaue 768 and apply phone reboots. I this just me?
Click to expand...
Click to collapse
this happens to me too (not thru the app, i OC using CMsettings) some minipro's can seemingly go only upto 691 MHZ withh one oc module..
for example with nAa kernel i can go only upto 691Mhz but with zombipanic kernel i can go to 800Mhz dunno y...
hey! d4. i saw gpu overclock stuff in ur github sources. any progress??
siddardha21 said:
hey! d4. i saw gpu overclock stuff in ur github sources. any progress??
Click to expand...
Click to collapse
Nope, GPU clocks seems to be complex to mod. And now im not in vacations so my time is not a lot cuz im almost always busy
Good work D4!!
and the app it's really small 33KB!!
just suggestions:
1
it's possible to have the stability test in a single option too?
...not linked to the save as safe feature??
2
..to write somewhere the swipe options
just in case of memory loss
thanks
ciribaski said:
Good work D4!!
and the app it's really small 33KB!!
just suggestions:
1
it's possible to have the stability test in a single option too?
...not linked to the save as safe feature??
2
..to write somewhere the swipe options
just in case of memory loss
thanks
Click to expand...
Click to collapse
I will do your first suggestion, was already planned, the other one i dont know if is so relevant
It seems my kernel doesn't support over clocking
The sliders are not moving, I guess I will have to replace the kernel. which one do you suggest? I have an Arc S.
DeepUnknown said:
It seems my kernel doesn't support over clocking
The sliders are not moving, I guess I will have to replace the kernel. which one do you suggest? I have an Arc S.
Click to expand...
Click to collapse
Could you tell me your Kernel's name (even better upload a screenshot of about phone in settings)?, also 2 more things, is your phone rooted, and did you allow superUser permissions to simple OC ?
Hi,
I cannot choose any IO schedulers - I have only 'noop' in every governor.
HTC Desire Z here and my kernel is 2.6.35.14-Andromadus-Flinny-v1 (from Andromadus ICS v8 rom).
Any suggestion?
Greets & thx for the app!
can i use this to underclock stock kernel?
stemer said:
Hi,
I cannot choose any IO schedulers - I have only 'noop' in every governor.
HTC Desire Z here and my kernel is 2.6.35.14-Andromadus-Flinny-v1 (from Andromadus ICS v8 rom).
Any suggestion?
Greets & thx for the app!
Click to expand...
Click to collapse
Can you upload a screenshot?, that may be because your kernel only supports noop io scheduler.
EDIT: On my stock kernel with no custom io schedulers, the list is reduced, so that does means your kernel only supports Noop scheduler.
romy134 said:
can i use this to underclock stock kernel?
Click to expand...
Click to collapse
Im not sure, but i will try and say you
EDIT: Yes you can, but with the new version, will release soon. Also, sliders cant be moved if your kernel does not support overclock, but you can setup easily a powersave governor, wich will underclock your cpu
universal?
what devices does this app support? all androids running 2.2+ or just xperia? i would assume that with SetCPU mentioned in the op that it is universal, but wanted to make sure. TIA
esthernrob said:
what devices does this app support? all androids running 2.2+ or just xperia? i would assume that with SetCPU mentioned in the op that it is universal, but wanted to make sure. TIA
Click to expand...
Click to collapse
My aim is to make it universal and lightweight as hell! ill need support from all devices owners, for now, it should work on any device, anyway please test it. I will release a "more universal" version soon, im talking about 2 days, almost done now.
ok nice app but its been done alread about the exac same thing with NOFRILLS CPU thats out in the market for free and has been out longer and suports more languages . so dont know why this app got recognition on xda while nofrills cpu didnt and its been out longer... if anyone intrested look up nofrills cpu its the same thing ..... ps. im not tolling or hateing just thought id point it out ...
Hi all,
I have a - stupid - question about kernels used by the DSC Roms.
The should be freq mini = 128, but is it possible to set this mini freq CPU without using a CPU Tuner program ? i'm using CPU Tuner to enable this mini freq. but this program like other ones use about 20 mo of ram, seems quite a lot of ram used to gain some battery life...
JB
DSC ROM has CPU Master Free included.
Besides, you can edit /etc/init.streak.post_boot.sh
Thanks for the answer.
I uninstalled CPU master Free a long time ago, and even when i upgraded to 0.74 CPU Master was not installed.
But It's not an affair, i prefer CPU Tuner.
I'll try anyway to edit /etc/init.streak.post_boot.sh to see if i can use it without CPU Tuner.
JB
Edit : seems to work if i believe on System panel ! thanks a lot !
Hi All..
First lemme give my phone details:
Galaxy S3 International (i9300)
Kernel : Siyah 1.8.9
ROMs (Dual Boot)
: WanamLite v5.5 (based on ZSEMA1)
CM10.1 Nightly
MODS : JKAY framework
My problem is that there is noticeable UI lags when in the homescreen or the app drawer.
I have not overclocked/underclocked the CPU. Have no undervoltage setting as well. In STweaks, the max CPU freq is set to the stock 1400Mhz and the min CPU freq is set to the recommended 200Mhz. And I have kept the "touch boost level" to 1200Mhz.
When I see the UI lags, I used CPU spy to monitor the CPU speeds. What I could see was that the speeds were at the lower end (200 - 800 Mhz) !!! Since the touch boost level is set to 1200, shouldn't the CPU jump to 1200 Mhz when I unlock/touch the screen ? I agree that the CPU speed needn't stay at 1200Mhz after the speed boost, but shouldn't it stay at a freq to ensure that there is no UI lag ?
If the operating freq is at 1400Mhz, the UI is perfect !!! It goes to this state automatically usually (takes a while ), or manually I can make this happen by setting the min CPU freq to say 1300 MHz from STweaks. Once this state is hit, the UI wrks with no lag until say I lock the screen, or maybe the device goes to sleep for a while.
Any ideas as to why the CPU freq stays at lower values and doesn't come up enough to give a lag free UI ?
stanzlavos said:
Hi All..
First lemme give my phone details:
Galaxy S3 International (i9300)
Kernel : Siyah 1.8.9
ROMs (Dual Boot)
: WanamLite v5.5 (based on ZSEMA1)
CM10.1 Nightly
MODS : JKAY framework
My problem is that there is noticeable UI lags when in the homescreen or the app drawer.
I have not overclocked/underclocked the CPU. Have no undervoltage setting as well. In STweaks, the max CPU freq is set to the stock 1400Mhz and the min CPU freq is set to the recommended 200Mhz. And I have kept the "touch boost level" to 1200Mhz.
When I see the UI lags, I used CPU spy to monitor the CPU speeds. What I could see was that the speeds were at the lower end (200 - 800 Mhz) !!! Since the touch boost level is set to 1200, shouldn't the CPU jump to 1200 Mhz when I unlock/touch the screen ? I agree that the CPU speed needn't stay at 1200Mhz after the speed boost, but shouldn't it stay at a freq to ensure that there is no UI lag ?
If the operating freq is at 1400Mhz, the UI is perfect !!! It goes to this state automatically usually (takes a while ), or manually I can make this happen by setting the min CPU freq to say 1300 MHz from STweaks. Once this state is hit, the UI wrks with no lag until say I lock the screen, or maybe the device goes to sleep for a while.
Any ideas as to why the CPU freq stays at lower values and doesn't come up enough to give a lag free UI ?
Click to expand...
Click to collapse
ANNNNNNNNNNNND what rom are you talking about!?! CM10.1 or Samsung? if you want a LAGG FREE phone do the following.
1: OverClock the CPU to 1.6ghz, then set min to 500mhz, use a -25mV or a -50mV
2: Set Governor to LULZACTIVEQ
3: Set MIN GPU freq to 266mhz
4: Set MAX GPU freq to 640mhz
5: Disable "gentle fair sleepers" on the CPU tab
6: Set the SCHEDULER to CFQ
7: Go to settings and enable GPU rendering
and FINALLY if non of the above work, FLASH Null_22.1 for a Samsung ROM. and Revolt, cm10.1, jellybam for a AOSP rom.
IF NON OF THAT WORK'S download super wipe and flash a new phone.
Can I just say, 1200mhz?!?! Default is 800 and I'm using 700 on my device. It's a bit extreme.
Perhaps your governor is affecting smoothness. Try using pegasusq. Or it may be the app your using to change CPU frequency doesn't even have ROOT access
International S III 16GB / CM10.1 / Gokhan's SK
paintball23456 said:
ANNNNNNNNNNNND what rom are you talking about!?! CM10.1 or Samsung? if you want a LAGG FREE phone do the following.
1: OverClock the CPU to 1.6ghz, then set min to 500mhz, use a -25mV or a -50mV
2: Set Governor to LULZACTIVEQ
3: Set MIN GPU freq to 266mhz
4: Set MAX GPU freq to 640mhz
5: Disable "gentle fair sleepers" on the CPU tab
6: Set the SCHEDULER to CFQ
7: Go to settings and enable GPU rendering and disable hardware overlays (resets on boot)
and FINALLY if non of the above work, FLASH Null_22.1 for a Samsung ROM. and Revolt, cm10.1, jellybam for a AOSP rom.
IF NON OF THAT WORK'S download super wipe and flash a new phone.
Click to expand...
Click to collapse
No. Do not disable hardware overlays. That will, if anything, cause your device to lag more.
Theshawty said:
No. Do not disable hardware overlays. That will, if anything, cause your device to lag more.
Click to expand...
Click to collapse
O_O not in my case..
paintball23456 said:
O_O not in my case..
Click to expand...
Click to collapse
This is a quote from a guy over at rootzwiki
Without a hardware overlay every application that is displaying things on the screen will share video memory and will have to constantly check for collision and clipping to render a proper image, this can cost a lot of processing power. With a hardware overlay each application gets its own portion of video memory, getting rid of the need to check for collision and clipping.
Basically, using hardware overlays can reduce CPU usage by quite a bit, so I would leave it enabled.
Click to expand...
Click to collapse
Theshawty said:
This is a quote from a guy over at rootzwiki
Click to expand...
Click to collapse
Right.. then why dafudge is my s3 SMOOTHER with it enabled?
paintball23456 said:
Right.. then why dafudge is my s3 SMOOTHER with it enabled?
Click to expand...
Click to collapse
Maybe you're just lucky, I dunno. It's better to let a real dev share his/her input on this. I'm merely a noob who knows how to Google...
Theshawty said:
Maybe you're just lucky, I dunno. It's better to let a real dev share his/her input on this. I'm merely a noob who knows how to Google...
Click to expand...
Click to collapse
L.O.L but not that big of a noob... thanks for the info - and also reminding me for the 100,000,000,000,000 time to sign up to rootwiki
paintball23456 said:
L.O.L but not that big of a noob... thanks for the info - and also reminding me for the 100,000,000,000,000 time to sign up to rootwiki
Click to expand...
Click to collapse
Heh, maybe not.
Uhm, you're welcome, I guess? :good:
It's probably smoother due to the fact that the CPU will be working at a higher frequency more often. Those that have disabled hardware overlays are causing their CPU to ramp up every time an application has to render an image
paintball23456 said:
ANNNNNNNNNNNND what rom are you talking about!?! CM10.1 or Samsung? if you want a LAGG FREE phone do the following.
1: OverClock the CPU to 1.6ghz, then set min to 500mhz, use a -25mV or a -50mV
2: Set Governor to LULZACTIVEQ
3: Set MIN GPU freq to 266mhz
4: Set MAX GPU freq to 640mhz
5: Disable "gentle fair sleepers" on the CPU tab
6: Set the SCHEDULER to CFQ
7: Go to settings and enable GPU rendering
and FINALLY if non of the above work, FLASH Null_22.1 for a Samsung ROM. and Revolt, cm10.1, jellybam for a AOSP rom.
IF NON OF THAT WORK'S download super wipe and flash a new phone.
Click to expand...
Click to collapse
The lag is more obvious in the Touchwiz based Wanamlite ROM.
1) As i said, when running at 1.4Ghz (with stock voltage settings) itsef the UI is smooth. So I don't actually want to overclock. . The problem is that the CPU speed doesn't rise up and stays between 200-800 causing the lag.
2) Will try changing the governor (first let me read how it is different from pegasusq ).
3,4) Again, with stock settings itself the UI is smooth. The problem is what i have said under point 1.
5) Already done.
6) WIll try setting scheduler to CFQ (again, lemme read bout it first )
7) GPU rendering is already ticketd. Hardware overlays are not disabled (thought this would increase the lag).
Is NULL_22.1 a Touchwiz based ROM ? And Jelybam is an AOKP ROM I supose ?
Wouldn't want to do the last option.
Also, I saw that you have mentioned three ROMs in your signature. Siyah lets you dual boot right, how come 3 ? Or were you just talking about your preference ?
And, does siyah 1.8.9 for the S3 let us boot with NULL_22.1 and jellybam in dual boot? Are all these combos possible ?
Sammy + CM10.1 (this works, I knw )
Sammy + AOKP
AOKP + CM10.1
raminica seemed
23Six said:
Can I just say, 1200mhz?!?! Default is 800 and I'm using 700 on my device. It's a bit extreme.
Perhaps your governor is affecting smoothness. Try using pegasusq. Or it may be the app your using to change CPU frequency doesn't even have ROOT access
International S III 16GB / CM10.1 / Gokhan's SK
Click to expand...
Click to collapse
From what I understood, it just boosts upto 1200Mhz on touch and needn't stay there. Right ? The only downside there is battery life I suppose ?
Am already using pegasusq and yes, sTweaks does have root access.