Related
hi there,
recently i encountered a iPhone that had on it an amazing case. the case was solid in my hand and felt like it count take on tons of damage. i really liked the case and was hoping to find one for the g1.
The case was made by otterbox but I looked on their site and they dont have any cases listed for the g1. has anyone found similar high quality cases to otterbox?
here is a link to the iPhone case so you can better compare.
http://www.otterbox.com/iphone-cases/iphone-3g-3gs-cases/iphone-3g-3gs-defender-case/
austriker27 said:
hi there,
recently i encountered a iPhone that had on it an amazing case. the case was solid in my hand and felt like it count take on tons of damage. i really liked the case and was hoping to find one for the g1.
The case was made by otterbox but I looked on their site and they dont have any cases listed for the g1. has anyone found similar high quality cases to otterbox?
here is a link to the iPhone case so you can better compare.
http://www.otterbox.com/iphone-cases/iphone-3g-3gs-cases/iphone-3g-3gs-defender-case/
Click to expand...
Click to collapse
My brother has that case, and I doubt you'll find anything like that for the G1. That right there is a DAMN nice case. It has a TWO cases. Inner case is plastic, and outer is rubber. Both nice and thick. Also a built on screen protector. Its just HUGE. As I said, though, don't expect anything like that for the G1. They have one for a myTouch, but I doubt it compares to the iPhone one.
For the most part you probably wouldn't need a case like that unless you are bringing your phone into a war zone. However, the G1 is a bit of an awkward phone in the way its designed. It has a strange sliding mechanism and that bizarre chin which makes cases a little more difficult to design. I've used a Fishbone case for over a year now. It is a hybrid silicone and hard plastic case, here is a link:
http://www.amazon.com/HTC-Titanium-..._1_3?ie=UTF8&s=wireless&qid=1279768828&sr=8-3
When I bought it over a year ago, it was around $7 for everything including shipping... the cost has gone up quite a bit for reasons unknown.
Alternatively you can try the metal cases
http://www.amazon.com/T-Mobile-G1-A..._1_3?ie=UTF8&s=wireless&qid=1279768873&sr=1-3
But this case actually doesn't allow you to use the touch screen nor slide the phone open, it locks in place, you have to unlock it and open the case to use your phone, it really is more of a carrying case rather than a protective phone cover.
Here is another one you might like, it is a full silicone case for the phone:
http://cgi.ebay.com/Soft-Silicone-S...ewItem&pt=PDA_Accessories&hash=item1c0c6bbafa
The cost is okay, but after hearing some reviews from fellow members on the site, I would avoid getting the clear one, because apparently it has a yellowish tint to it.
Out of all these cases the only one I have used is the Fishbone case (and an Invisible Shield). You probably aren't considering an Invisible Shield, because they seriously ONLY protect your phone from scratches and nothing else, there is no impact resistance to it. It covers 95% of your phone, the 5% it doesn't cover is the corners of your phone, also the most likely places to get damaged when you drop it or just have it in your pocket.
So, again, I say go with the Fishbone case. It actually looks pretty cool, considering the G1 isn't a very spectacular looking phone in the first place. (don't get me wrong, I love my G1)
sweet thanks for the help!!
Yea well who knows, maybe I AM going into a warzone hehe.. Nah I just like the feel of that otterbox case.
Thanks for the heads up on that amazon case, I will check it out! And yea I heard those certain ebay cases are a wee bit yellowy.
http://www.amazon.com/Optimus-E970-HYBRID-Silicone-Black/dp/B00ATIEB4E/ref=cm_cmu_pg__header
This is a pretty decent hybrid case. I uploaded a few pictures to Amazon to give more people a better chance to see what it looks like since the seller only uploaded a picture of the back, and I have the only review on Amazon as well if you want to hear what I thought about it. Basically, it's a good fit but I'm not the biggest fan of how it feels in my hand and how much thickness it adds. I honestly feel like they could have made the silicone thinner where it's covered by hard plastic and reduced the overall thickness by a lot. It's not the end of the world, but we'll see how long I have it on there before I take if off and go all slim-n-sexy again.
Also, for whatever reason Amazon didn't like my picture of the packaging so I'm attaching a picture of the mailer it comes in and the packaging you have to open. It's pretty standard stuff, but it's here for you to look at just in case.
Edit: Typo.
How do the buttons feel?
They are a little bit cheaper if you order from
eBay Seller: hc-power --- Multiple Colors and Hybrid Designs
http://www.ebay.com/sch/m.html?_odk...046732.m570.l1313&_nkw=e970+silicone&_sacat=0
This is the case I decised on too. I works, very light, but I'm not sure how much protection it offers. Coming from a Seidio Active case on an iPhone 4, this is a let down, but there aren't many choices. I'd rate it a 6 overall
KarlP said:
This is the case I decised on too. I works, very light, but I'm not sure how much protection it offers. Coming from a Seidio Active case on an iPhone 4, this is a let down, but there aren't many choices. I'd rate it a 6 overall
Click to expand...
Click to collapse
Agreed - But there's not much case love for the AT&T OG so we're at the mercy of this type of case unless Seidio or Otterbox or such changes their mind about making something for us.
I got this case off eBay, just received it yesterday. For a case being under $10 its not bad and I feel it will protect it from a mild drop just fine. Also the silicone on the front has a raised lip so if you set the phone face down its not on the screen. The only real down side is that the case covers the power button so no notification light now.
I'll add pictures of mine, since its blue might be easier to see then the black case.
Sent From My LG Optimus
How does the case feel?
I purchased the one from Ventev that looks identical to this case. I sent that one back because the "TPU" it said the case was made of was really hard kinda felt like plastic. That made the buttons hard to push. Is the rubber the case made out of hard or soft like tradition TPU? I want this case because I like the two layers of protection but I dont want another case that was like the Ventev case. For now I have the Diztronic case on it and I took the plastic shell off the Belkin case and it fit over the Diztronic TPU case with little force and its like a makeshift Otterbox Commuter.
REDFOCZ said:
I got this case off eBay, just received it yesterday. For a case being under $10 its not bad and I feel it will protect it from a mild drop just fine. Also the silicone on the front has a raised lip so if you set the phone face down its not on the screen. The only real down side is that the case covers the power button so no notification light now.
I'll add pictures of mine, since its blue might be easier to see then the black case.
View attachment 1641419
View attachment 1641420
Sent From My LG Optimus
Click to expand...
Click to collapse
I just replaced mine with the Fusion Hybrid, I like it much better...
After only like 2 weeks, the "silicone" was stretching. It's actually more like a molded foam, and the plastic hard shell only holds it to the phone in a few areas. The plastic shell on the Fusion Hybrid actually seems to be a lot more stiff and holds it on three sides. The silicone feels a lot better on the new case as well, seems more dense...
For less than $10, neither is terrible, but I'd spend on the Fusion Hybrid...
Hello friends,
I thought I'd share some thoughts on the four cases I have for my Note 3. They are, from left to right: A Samsung view case which came with my phone, a Wave case by Mob:C, a Neo Hybrid case by Spigen, and a Slim Armor case also by Spigen.
First, the flip/window case. This was free when I bought my phone in Korea. It has a window and finger grooves on the side. I'm fairly certain it's an official Samsung product, but it's not very good. I only used it for about three days before buying a new case, and I noticed the following:
1. The window was already very scrathed and didn't look very good.
2. The case didn't stay shut that well.
3. The finger groove design makes it difficult to put into and remove from the pocket.
4. The build quality isn't very good. The case feels cheap and fragile.
5. It's also not a smart flip case. Would not recommend.
The second case, called the Wave by Mob:c was the first non flip case I found In Korea. I liked the drop protection this case offered, but the enormous rubbery bumpers also added a significant amount of girth to the phone. I also liked the deeply recessed camera cutout, which kept the camera well away from tabletops. The s pen cutout is also very generous, allowing for easy access. Things I dislike about this case are as follows:
1. The wave shape is perhaps intended to make the phone fit the hand better, but in reality it seems to make it worse, possibly because it makes the phone so wide.
2. The wave shape, like the fingergrooves on the flip case, tends to make this case get hung up on pockets when going in or coming out.
3. The bezel around the screen is quite shallow, making it dangerous to set the phone down face down.
This case is alright overall, but I can't really recommend it unless you're in love with the shape.
The third case is the well known Neo Hybrid from Spigen. This case arrived at the same time as the Slim Armor, as I liked both designs but wasn't sure which I'd prefer. This case is very slim and therefore doesn't feel like it would offer much protection. It's also a bit slick in the hand. The only other thing I'm not crazy about with this case is the very low bezel on the screen and the very shallow recess for the camera. It didn't offer the protection I wanted, but I still think it's an attractive design and will work perfectly for those looking for a trim case that still offers a bit of protection.
Lastly, my favorite of the four, the Slim Armor. Things I like about this case include the just deep enough bezel, the just deep enough camera recess, and the rock solid feel in the hand. It honestly feels like a suit of armor for your phone, and while it doesn't appear to offer the maximum protection you'd get from the Otterbox or similar designs, I'd still trust it to save the phone from a realistic drop. Things I don't like about it: it's quite slick in the hand, and the buttons aren't quite as easy to use as they are on the naked phone or with the other cases.
Overall, I'd highly recommend this case. The feeling in the hand is just fantastic, and the case is attractive but still minimalist.
Hope you enjoyed these mini reviews, thanks for reading.
Sent from my SM-N900K using Tapatalk
I am using the slim armor myself in slate. Absolutely love it. I also tried the neo and wasn't impressed. The outer ring didn't fit properly and the overall feel in the hand wasn't for me.
Sent from my SM-N900V using xda app-developers app
The slim armor in my opinion is hell to put on I have the white and black one
Sent from my SM-N900T using Tapatalk
troyd28 said:
The slim armor in my opinion is hell to put on I have the white and black one
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I have the Slim Armor on my N3 right now in white. The fit and finish is at a very high level. The protection seems about right for normal use. It is an impressive case. Very solid and polished. But, I am not sure I am going to be able to continue to use it for two reasons. First, it is slippery. Common sense tells me I am going to drop this case more often and that just does not make sense to me. Second, the power button takes an effort to push and that is annoying because you are always using it. I could probably live with the buttons, but worrying about dropping the phone is a deal breaker for me. My last case was the CruiserLite on my Note 2. I used that case for a year ... very grippy with texture on each side ... dropped it one in a year of use. I've tried the CruiserLite for the Note 3, but it did not fit well and I returned it.
Any suggestions on a grippy case for the Note 3?
UCSB said:
I have the Slim Armor on my N3 right now in white. The fit and finish is at a very high level. The protection seems about right for normal use. It is an impressive case. Very solid and polished. But, I am not sure I am going to be able to continue to use it for two reasons. First, it is slippery. Common sense tells me I am going to drop this case more often and that just does not make sense to me. Second, the power button takes an effort to push and that is annoying because you are always using it. I could probably live with the buttons, but worrying about dropping the phone is a deal breaker for me. My last case was the CruiserLite on my Note 2. I used that case for a year ... very grippy with texture on each side ... dropped it one in a year of use. I've tried the CruiserLite for the Note 3, but it did not fit well and I returned it.
Any suggestions on a grippy case for the Note 3?
Click to expand...
Click to collapse
I have about 5 case for my phone right now so far this spigen is the 1 that would slip out hand the most but I haven't broke it yet then I have the knock off griffin case that has protection and has grip and it's kind like the otterbox then I have some cheap 9$ one I won on a ebay bid then I have the blason one which has alot of grip then I have a caseology one but the spigen is semi tough because I dropped it once on tile floor the knockoff griffin is pretty touch I dropped it while biking on pavement and it survived surprisingly because the case was 10$ from Japan
Sent from my SM-N900T using Tapatalk
Disclaimer : I do not benefit in any way for saying anything good or bad about these products. I am giving you guys my honest opinion on these cases to help provide some assistance on buying a case.
Let’s start with the first case I bought from them.
Orzly Flexicase (Clear)
Link to the case: https://www.amazon.co.uk/dp/B072MZCQB6/ref=cm_sw_r_cp_dp_T1_v8mFzb704M66R
Price :£12.99
Things I like: Simple case, adds much need grip to the OnePlus5. Doesn't detract from the overall phones aesthetic or feel. , Good lip around the camera bump and the front.
Things of concern: It's a simple case, it's mainly there to prevent scratches. Not going to protect your phone from anything major
Comments: I really like this case, there is a craft to a making something simple and effective and this is it. No fancy features it just protects your phone from scratches, adds grip and protects from small drops. It doesn't over stay it's welcome and I congratulate on that.
I was happy with my purchase at the price I paid but since it has gone down. I think anyone wanting a simple case you can't really go wrong with this.
Also like to note, I haven't had problems with any holes in the case. Some people on other forums have asked me about the quality of the finish. No evident problems with the finish of my case.
Photos: http://imgur.com/a/c8eOF
Orzly Wallet Case (Black)
Link to the case : https://www.amazon.co.uk/dp/B072QV1VRT/ref=cm_sw_r_cp_dp_T1_qInFzbCVEWP0X
Price: £14.99
Things I like: Protects the screen while it’s closed, Magnet keeps the wallet closed well, Effective card slots and pocket slot, Effective stand, I like the case that holds the phone in the wallet, not too bulky.
Things of concern: It’s a wallet case, people either love them or hate them.
Comments: I had this case for my HTC 10 and they have improved this case immensely. Now having three card slots instead of two allows me to take my bank card, ID and my public transport card without having to double up in the slots (That can create further issues). The main issue with last years was the case that held the phone in place. Last year was a hard shell, now throughout my time working with phones, more than half of wallet cases I have seen have broken inner shells because they use a hard shell inside. This year they have basically taken the great Flexicase design and used it as the holder for the wallet case. That was a great move and make the wallet case great.
For a wallet case, this is a solid wallet case. You can’t really go wrong with it.
Photos: http://imgur.com/a/j1FFv
Orzly Slim Stand Case
Link to the case : https://www.amazon.co.uk/gp/product/B073S7BWQQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Price:£12.99
Things I like: THIS THING IS SLIM, the case itself may be the lowest profile case I have used on the OnePlus5, The stand can withstand a lot, stand can be rotated in different ways.
Things of concern: This case may not work with some in-car phone holders, the stand bulges out and made it hard for my vent holder to hold it.
Comments: I picked up this case because I was intrigued. I didn’t think I would like it but I really did! The case has a really nice soft touch finish and provides protection for the camera bump which is surprising as the case is really low profile , it provides a very small lip on the front so it may or may not protect the phone from if you put your phone screen down. The case doesn’t really take much away from the buttons which is nice.
The ring stand is really handy, A couple of times I’ve used it. I do find myself playing with the ring stand itself and hanging my phone off my finger, the case fits very well I can trust that my phone will stay there hanging. The stand really is quite strong. I can put a lot of force on the stand and it didn’t feel like it would break, (I have posted a video demoing that) The things I would say is that I would like the stand to have different standing points, it would be nice to have the phone to stand at different angles, while this isn’t a major thing, I thought I’d point it out.
I really like this case, nuff said.
Photos: http://imgur.com/a/kHBlm
Video:
Orzly Fusion Case
Link to the case : https://www.amazon.co.uk/gp/product/B072MPYX9Y/ref=od_aui_detailpages00?ie=UTF8&psc=1)
Price: £9.99
Things I like: Not bulky, feels like it would protect the case.
Things of concern: Can’t think of anything…
Comments: This is the case I have on my OnePlus5, I really like it. It’s like the FlexiCase but better. This honestly feels like this case has been designed by someone who’s wanting a make a case for themselves. There is extra grip points around parts of the case which your hand is in contact with. That’s a smart move. There is some little feet on the back around the clear back, this is a expert level move from Orzly, clear plastic scratches easily by doing this the plastic clear back from the ground. The clear back is quite hard and seems like it could withstand a drop, this is the motto of this case: it’s solid.
Photos: http://imgur.com/a/CqoVz
Comments About Orzly
One thing I have noticed is Orzly has revamped their packaging. It’s more like you would see in a shop and has nice little touches to them. Having a little tab to pull to open the box and having nice information (To read on the toilet obviously) adds to the over. Here is some photos : http://imgur.com/a/vZ4eu
Please ask any questions and if this helped someone, if you liked it I may do more.
Thanks so much for this. I agree with the flexicase and slim case, both have been great for me and I have already used the stand on the slim case for a train journey. Worked out great. I am looking forward to receiving my fusion bumper case from the reviews both you and niijonodhg have been giving!
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
abe2912 said:
Thanks for your review. Can't decide between slim stand and fusion case. I don't like a lot of bulk as the phone itself isn't the smallest one and I like to keep the look of it. Generally I'm very very careful with my phones but
Unfortunately I already cracked my screen (first time ever). Currently in repair.
Click to expand...
Click to collapse
If it helps, my favourite case so far has been the Fusion!
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
abe2912 said:
Yes you do make it harder ?. I never used cases mainly for protection but more for the extra grip but dropping my OP5 makes me reconsider this. But when I dropped it I didn't have any case installed so it was pretty slippy. Maybe I try both cases as they are not that expensive .
Click to expand...
Click to collapse
Getting both of them might be a good option. My favorite is the fusion but the slim case is really good. The slim case adds grip to the phone without much bulk or extraprotection where as the fusion is really grippy as well as adding more protection.
DarkExistence said:
Ouch hopefully you get it back soon! As for the slim case, it has virtually no screen protection but the stand is very useful and it is also a grippy case. You can put your finger in the ring part while your using it to help you stop dropping it.
I've made your decision even harder
Click to expand...
Click to collapse
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
AnabolicAndroidz said:
Yeah the stand feature for me is a must. Personally I prefer the Wallet Case version, as it's got that extra bit of screen protection with the fordable lid. But they're all nice in different ways.
Click to expand...
Click to collapse
Any stand is nice really, what I like about the slim stand case though is that you can put your finger in the ring and it will mean your phone cant drop, very useful actually
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
abe2912 said:
Just received my Orzly Fusion today and have to say: that thing is amazing! Adds minimal bulk but seems to be good protection. And the best thing is that it adds so much grip to the phone and makes it really comfortable to use.
Click to expand...
Click to collapse
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
Looks really good with that dbrand skin! Glad to know you had the same sort of material that didn't yellow
ab7casper said:
I also received mine today and I completely agree with everything.
I had the Ringke case on my Nexus 6P, which had the same type of back plastic and I know for a fact it does not yellow over time.
I also have a dBrand skin on my phone, and the case fit perfectly over it with no hassle at all. Dragon Skin with Orange Logo and Camera Cutout.
I also have the Orzly Tempered glass installed and the case fits perfectly around the glass as it should... Since it's from the same company.
Click to expand...
Click to collapse
That is beautiful!
Finally got my video up:
niijonodhg said:
That is beautiful!
Finally got my video up:
Click to expand...
Click to collapse
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
ab7casper said:
Good video, I definitely agree. There's not much else to say about it.... Its a good case. It really compliments the phone.
Click to expand...
Click to collapse
Thanks!
Hi:
Has anyone found a reasonably high quality case for the LG X Venture/X Calilbur V9?
I love my X Venture, but I've already tried 3 cases for it. The first case-a MiniTurtle was complete garbage-unusable.
https://www.amazon.com/gp/product/B06Y2KZPD9/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
The second one, a Spevert, sold on Amazon
https://www.amazon.com/gp/product/B073XCWJ6P/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
was almost usable, but provided minimal protection, and was also somewhat junky.
The third, a Zizo Bolt, looked to be quite well-made in many ways, and provides good protection. However, the buttons are inline or even slightly recessed from the edge of the case, and also stiff. That makes them extremely difficult to press. The case is also a little too slippery in the hand.
Does anyone know of a quality case for the X Venture? I'd prefer all TPU for grip, but two layers would be fine.
I'm using an Incipio NGP case and I really like it. I wish it was clear because I really like the design of the X venture and I would prefer not to hide it, but the case does give a nice extra layer of protection and I really like how it makes the buttons feel (the buttons on my phone require barely any force to press, which I really don't like. The case provides a little bit of extra stiffness so it makes the buttons feel a lot better. Definitely not too stiff though). It's also pretty grippy, but not quite as grippy as the bare back of the phone in my opinion.
I also tried a Speck clear case and I really didn't like it. It made the buttons feel awful and the material that it's made of - I didn't like how it felt in the hand and it's also totally smooth so it has much less grip than the bare back of the phone.
Thanks Rich. Is it fairly thick as cases go, thin, or somewhere in between?
Rich:
Thanks. Compared with other cases, is it thick, thin, or somewhere in between? Any chance you could measure its thickness? It's made of TPU, right?
RichBordoni said:
I'm using an Incipio NGP case and I really like it. I wish it was clear because I really like the design of the X venture and I would prefer not to hide it, but the case does give a nice extra layer of protection and I really like how it makes the buttons feel (the buttons on my phone require barely any force to press, which I really don't like. The case provides a little bit of extra stiffness so it makes the buttons feel a lot better. Definitely not too stiff though). It's also pretty grippy, but not quite as grippy as the bare back of the phone in my opinion.
I also tried a Speck clear case and I really didn't like it. It made the buttons feel awful and the material that it's made of - I didn't like how it felt in the hand and it's also totally smooth so it has much less grip than the bare back of the phone.
Click to expand...
Click to collapse
Shplad said:
Rich:
Thanks. Compared with other cases, is it thick, thin, or somewhere in between? Any chance you could measure its thickness? It's made of TPU, right?
Click to expand...
Click to collapse
It's decently thick, a little bit more than I expected, and it feels very sturdy. It's not one of those cheap thin cases. If I had to guess I would say it's somewhere around 1.5mm thick. I don't know if it's made out of TPU but the website says it's made out of a polymer material. It's flexible but still feels very sturdy.
I don't know if this will help at all but I took a picture of the back camera cutout so you can kinda get an idea of how thick the case is: https://i.imgur.com/BdDx5zo.jpg Like I mentioned before, to me it looks like maybe 1 - 1.5mm.
Rich:
Thanks again. I know what you mean-the X Venture is elegant looking, isn't it.
Mmmm..that looks like more than 1.5mm to me, but it's hard to tell. The other thing I really was hoping for was a belt clip, which the Incipio doesn't have. I will consider getting one anyways, though. I can use it on my second LG X Venture. I like the phone so much I bought a second one as a backup.
I'm emailed Armor-X to see if they have a case to fit the Venture. Why is this so hard?
Shplad said:
Rich:
Thanks again. I know what you mean-the X Venture is elegant looking, isn't it.
Mmmm..that looks like more than 1.5mm to me, but it's hard to tell. The other thing I really was hoping for was a belt clip, which the Incipio doesn't have. I will consider getting one anyways, though. I can use it on my second LG X Venture. I like the phone so much I bought a second one as a backup.
I'm emailed Armor-X to see if they have a case to fit the Venture. Why is this so hard?
Click to expand...
Click to collapse
Oh, if you're interested in one with a belt clip Pelican makes a heavy-duty case that comes with a belt clip I believe: http://www.pelican.com/us/en/product/phone-and-tablet-cases/lg-case/voyager/c31030 (a little bit too big for me)
Unfortunately it's not a super popular phone so our case options are a bit limited compared to, say, a flagship. Plus, it is a rugged phone so it does have some pretty good protection by itself.