So my phone has been acting up lately and I was thinking of returning it howver I had the nasty yellow triangle and my flash counter was at one. So I needed a jig. I said forget it Ill deal with it. Well I decided to take out the battery as a means of fixing the issues i was having and when I placed the battery back in the phone booted into download mode and my flash counter read zero. I still have root access I still have CWR and I can still flash custom roms and the counter is at zero and there is no yellow triangle it is the stock att gs2 boot up. Idk what happened but I removed the battery wiped off some dust and boom no more triangle and a flash counter at zero with a jig and by complete accident! lol anyone got an explanation?
No idea what happened, but seems to me like you got lucky!
Sent from my Samsung Galaxy S II running ICScrewD.
Via XDA Premium
Related
If I'm rooted and have Unamed Rom installed and I use a jig to get rid of the dreaded yellow triangle, will it do a factory reset? Will I have to re root and re flash? Or does the root stay intact?
mrmercedes said:
If I'm rooted and have Unamed Rom installed and I use a jig to get rid of the dreaded yellow triangle, will it do a factory reset? Will I have to re root and re flash? Or does the root stay intact?
Click to expand...
Click to collapse
You will not lose root, you will not lose any data either all the Jig does is get rid of the dreaded yellow exclamation point and will tell you Reset Counter. I did this after I rooted my phone when I was running the stock launch rom.
HTH,
Charlie
If you have a jig then go for it... But it sounds a if you don't yet have one. In that case make a nand backup, flag with Odin the rooted stock rom... This will remove the yellow triangle. Then use mobile Odin to flash cwm and finally restore. It sounds difficult but it really wasn't. It's a good alternative if you dint want to get a jig and you only care about the triangle and not the counter
Sent from my SGH-I777 using XDA App
Sorry about the stupid appearance of this question.
I flashed to unnamed last October and I bought a JIG to remove my yellow triangle and reset the counter. It worked.
I read that the new ICS roms disable the JIG ability and the counter gets updated.
I'm planning to flash to either CM9, Phone Bricker, or ShoStockv2. When I flash to those roms, how can I do so without updating my flash counter?
I tried reading the guide, but I'm confused as to what exactly I should make sure I do. The guide looks like a normal flash.
As long as you flash from CWM it won't trigger the count or triangle. Flash just like a GB ROM, no special prep. Only the odin-one-click of the leak has a bootloader (that is what causes the jig to stop working). The zipped ROMs won't have a bootloader.
Sent from my Galaxy S II (i777)
crewxp said:
Sorry about the stupid appearance of this question.
I flashed to unnamed last October and I bought a JIG to remove my yellow triangle and reset the counter. It worked.
I read that the new ICS roms disable the JIG ability and the counter gets updated.
I'm planning to flash to either CM9, Phone Bricker, or ShoStockv2. When I flash to those roms, how can I do so without updating my flash counter?
I tried reading the guide, but I'm confused as to what exactly I should make sure I do. The guide looks like a normal flash.
Click to expand...
Click to collapse
the triangle will not come back. Just wipe and flash. Your already rooted and have a kennel installed.
Sent from my SGH-I777 using Tapatalk
crewxp said:
Sorry about the stupid appearance of this question.
I flashed to unnamed last October and I bought a JIG to remove my yellow triangle and reset the counter. It worked.
I read that the new ICS roms disable the JIG ability and the counter gets updated.
I'm planning to flash to either CM9, Phone Bricker, or ShoStockv2. When I flash to those roms, how can I do so without updating my flash counter?
I tried reading the guide, but I'm confused as to what exactly I should make sure I do. The guide looks like a normal flash.
Click to expand...
Click to collapse
As long as you don't flash boot loaders you'll be triangle less. Check out the mobile Odin thread also.
Also, TriangleAway (free on XDA, paid on Market) will nuke the triangle if you're on ICS.
Doesn't work when running GB.
Sent from my GT-P7510 using Tapatalk
I bought a jig to prevent the triangle after it popped up. I flashed a ton of times with CWM it has never revered its head. You're fine and I'm on ICS now. Like others said just say no to new bootloader
Sent from my SGH-I777 using xda premium
As long as you don't flash any of the newer 1click which flashes the boot loaders like uckk6 and newer you should not have any issues. I went from unnamed 2.2.1 to fakerom than to shostock rc2 than up to rc3, rc4, rc5 and v1.0 with out any issues! Plus shostock does not flash any bootloaders in fact I am still running uckh7 2.3 bootloaders.
Hth,
Charlie
Sent from my SGH-I777 using Tapatalk
Hello,
I've just got myself a USB Jig! And I turn off my phone and plug it in. The phone goes into download mode but the flash counter doesn't reset
Any reason why this is? Cause I don't wanna use triangle away as I am scared of bricking my phone. I'm running Super Nexus ROM with Syiah kernel.
Adarzannh said:
Hello,
I've just got myself a USB Jig! And I turn off my phone and plug it in. The phone goes into download mode but the flash counter doesn't reset
Any reason why this is? Cause I don't wanna use triangle away as I am scared of bricking my phone. I'm running Super Nexus ROM with Syiah kernel.
Click to expand...
Click to collapse
use "Triangle Away" ma8, thats the best way to remove Yellow triangle and reset ur counter when on latest ICS build Roms
Adarzannh said:
Hello,
I've just got myself a USB Jig! And I turn off my phone and plug it in. The phone goes into download mode but the flash counter doesn't reset
Any reason why this is? Cause I don't wanna use triangle away as I am scared of bricking my phone. I'm running Super Nexus ROM with Syiah kernel.
Click to expand...
Click to collapse
The USB jig couldn't reset the binary counter because you have a new bootloader. USB jig only works on older bootloader.
I seriously don't know why you are so scared of triangle away app. I've used it many times for myself and friends.
Read the instruction on the OP very well, then use the app.
Happy Independence Day!
The last time I used Sammy kernel was when I reverted my phone to stock before going to JellyBean. What I did was I flashed my S2 with the bootloader came from Gingerbread days. Luckily my JIG reset my counter but recently people suggest the triangle away app rather than flashing an old bootloader.
Sent from my GT-I9100 using Tapatalk
UnwiredDroid said:
The last time I used Sammy kernel was when I reverted my phone to stock before going to JellyBean. What I did was I flashed my S2 with the bootloader came from Gingerbread days. Luckily my JIG reset my counter but recently people suggest the triangle away app rather than flashing an old bootloader.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
flashing/changing Bootloader is a messy thing compared to using the well known method ie 'Triangle Away app' ma8
Thanks all, I used the triangle away app and it worked great! I was just kinda scared as it says it can break your phone in the description and when you click to reset the counter. But I'm super pleased now, thanks a bunch
Hi guys, i'm going to sell my galaxy s2 and the buyer want it all stock. I'm using the cm10 ROM on it. I've already downloaded the factory stock firmware on sammobile.com. Until there everything was ok, but now I'm not sure about the way to flash the stock firmware. Should I flash it by clockworkmod, as the customs Roms I've flashed before? Or should I flash it by Odin, like an unrooted phone?
Since now, thanks a lot for your help
Sent from my Nexus 7 using xda app-developers app
Flash it via Odin as PDA
Then wipe all in recovery
Sent from my GT-I9100 using xda app-developers app
when doing this, will the yellow triangle go away, phone get unrooted, and flash counter reset to 0?
cus im sure the buyer would want any avaliable warranty back aswell.
It would probably be good to reset counter before flashing, maybe with Triangleaway. Once i flashed original rom over custom with MobileOdin. Everything went well.
Sent from my GT-I9100 using xda premium
aliendna99 said:
when doing this, will the yellow triangle go away, phone get unrooted, and flash counter reset to 0?
cus im sure the buyer would want any avaliable warranty back aswell.
Click to expand...
Click to collapse
No, to reset counter and remove triangle you can do it either with a usb jig or by downloading chainfire app "triangle away" (Search it on the play store")
aliendna99 said:
when doing this, will the yellow triangle go away, phone get unrooted, and flash counter reset to 0?
cus im sure the buyer would want any avaliable warranty back aswell.
Click to expand...
Click to collapse
When u're flashing samsung stocks it'll does full wipe include rom itself, kernel, root, user data & caches then turn all to factory value. So don't even too worries about all u said above. But it worth to use stock 4.0.3 & avoid stock 4.0.4 in case to avoid emmc superbrick bug if u still doubt about advancing..
Sent from my GT-I9100 using xda app-developers app
If you flash a "samsung official rom" it will take the triangle away but it does not reset the counter.
I have flashed CM9 CM10 and 2.3 stock , 4.0 stock a few times and my count is at 7, each time i flash stock the triangle goes away but the counter keeps counting.
I have my S3 in a Revolution HD v51 custom rom. Everything was working very smooth until the phone all the sudden crashed and never passed the sammy screen again.
I tryed varies reflashes, recoveries roms etc. it seems it cant mount the internal sd. I've been reading for hours about possible solutionsI'm guessing some hardware error.
Is there a way to reset flash counter WITHOUT triangle away?
Any method or suggestion welcome. since the phone is already screwed.
fuleng66 said:
I have my S3 in a Revolution HD v51 custom rom. Everything was working very smooth until the phone all the sudden crashed and never passed the sammy screen again.
I tryed varies reflashes, recoveries roms etc. it seems it cant mount the internal sd. I've been reading for hours about possible solutionsI'm guessing some hardware error.
Is there a way to reset flash counter WITHOUT triangle away?
Any method or suggestion welcome. since the phone is already screwed.
Click to expand...
Click to collapse
Im having a similar problem except triangle away isnt working for me.... I follow steps and manage to load app on phone and then it reboots into its own recovery thingy and i press vol up and it does the thing to reset flash but when i got back into download mode i still have 6 flash counts!!:crying:
No, there is no other method to reset flash counter.
Triangle away only works on older bootloaders.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
No, there is no other method to reset flash counter.
Triangle away on works on older bootloaders.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
So is there any other way to fix mine? I bought my phone late january 2014 and TA isnt working for me...dosnt reset the counter even though it states it does...
Triangle away will work, but not with the bootloader you have now.
Sent from my GT-I9300 using Tapatalk
Please take a look at this thread, may be it would help.
http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847
all you gotta do is downgrade your bootloader to the one other than the JB bootloader and follow the steps as mentioned on the guide so that the JB bootloader would not set the flash counter to an integer again other than 0.
Credits to @doovd who prepared this guide.