Hi guys i have a little dout about it
i've been flashing a few roms lately like the RESURRECTION and the FOXHOUND
my first room was the resurrection 9.5 an it was perfect but when i flash the 9.7 been havin kernel panic message and a few problems when typing messages in programs like Whatsapp where the background of the typing box shows Gray and all the hold press in here the menu shows BLACK and the letters black too, i have to guess whats the option i'm lookin for, (like the attached screenshoots)
then i though it was the rom so i flash another one that i hate it, then i flash FOXHOUND 0.5 and it runs well but have the same trouble with tex box and popup messages also some crashing promblems like the RESURRECTION, so by discarting it cant be the roms.
now thats the question it is the KERNEL?
my phone says i have
[email protected] #3
im not sure what kernel i installed it when i first install the stock ICS LPB to root the phone.
Any ideas? and what can i do?
MANY THANKS!!
Did you wipe before flashing? And if the problem occurred after some time then it's not kernel. If it happened after a kernel flash then it's kernel (although I doubt it).
You can always flash another kernel.
bpivk said:
Did you wipe before flashing? And if the problem occurred after some time then it's not kernel. If it happened after a kernel flash then it's kernel (although I doubt it).
You can always flash another kernel.
Click to expand...
Click to collapse
I wipe everything before every flash including dalvik cache thats what bothers me
and I've already flashed the latest Chainfire 5.4 kernel through CWM and the problem still there with my current ROM (foxhound)
the problem happens when i flash the RESURRECTION 9.7 and still there so thats why i think it wasn't the rom because it can be three roms in row with the problem.
getabu said:
I wipe everything before every flash including dalvik cache thats what bothers me
and I've already flashed the latest Chainfire 5.4 kernel through CWM and the problem still there with my current ROM (foxhound)
the problem happens when i flash the RESURRECTION 9.7 and still there so thats why i think it wasn't the rom because it can be three roms in row with the problem.
Click to expand...
Click to collapse
If you at the moment Remix 9.7 and from screen shoots I can see it`s theme bug. This version came with Vertumus theme build in. Change you rom or wait a Remix update. West was promise today will update.
078gregory said:
If you at the moment Remix 9.7 and from screen shoots I can see it`s theme bug. This version came with Vertumus theme build in. Change you rom or wait a Remix update. West was promise today will update.
Click to expand...
Click to collapse
But thats the strange thing because in the Foxhound also its happening and what about the KERNEL error messages some times in the remix 9.7, do far in Fox hound it havent happens since i flash it yesterday.
and just in case i have the international version of galaxy s2 i9000
I really hope so! i really love the Resurrection remix roms, and this FoxHound its very good too and its just BETA
here is a screenshot of the typebox bug.
Even with the new RESURRECTION 1.0 the problem insist on my phone, i even wipe all my data SD FORMAT, and before install WIPE DATA, CACHE, DALVIK, even BATERY STATS, and still the the bug insist i dont know what else to do! please help!!
it's starting to anoy me a lot!!
Flash a stock rom after a full wipe .
Test phone .
my phone says i have
[email protected] #3
It says SIYAH LPQ kernel
jje
JJEgan said:
Flash a stock rom after a full wipe .
Test phone .
my phone says i have
[email protected] #3
It says SIYAH LPQ kernel
jje
Click to expand...
Click to collapse
I flash the stock rom and it works great, son i flash the Resurrection and the same problem!!! almost cry!!
any ideas?
Related
Could someone possibly help with a small problem... I cant seem to get the home button to work anymore instead i have to press to the right similar to how the new Nexus works. I would prefer pressing the button but cant see any settings for it. Hope this description is reasonably clear
Thanks
sr
Did you flash something right before this started happening?
if it was after a flash.... try reinstalling from your back up.... could be a bad flash or an incompatible rom?
BobPowers said:
if it was after a flash.... try reinstalling from your back up.... could be a bad flash or an incompatible rom?
Click to expand...
Click to collapse
That's my guess, and what I'm trying to determine with my above question. If he did flash something, I'm guessing he flashed an I777 ROM to his I9100, or he actually has an I777, and flashed an I9100 ROM.
Right...
Yep, i flashed the Resurrection Remix ics v1.1 PRO[XXLPE] rom but as I was getting a few problems I flashed the Turkbey V5 back. I was getting the same problem with Resurrection Remix as well as some fc ?
Thanks
sr
steve16 said:
Yep, i flashed the Resurrection Remix ics v1.1 PRO[XXLPE] rom but as I was getting a few problems I flashed the Turkbey V5 back. I was getting the same problem with Resurrection Remix as well as some fc ?
Thanks
sr
Click to expand...
Click to collapse
Usual answer is factory reset, see if that helps. If not, re-flash your ROM. If that doesn't help, re-flash back to stock.
Did you follow the steps for installing RR 1.1 fully, wipe dalvic, apply after boot fixes etc? There is a good walkthrough somewhere on this forum, check it out.
I made a more detailed walkthrough for Remix (in my sig) but v1.2 will be out any moment which will be more "n00b" proof with less steps. I'd wait for it, if you are considering to try it again.
Here it was this one I meant...
http://forum.xda-developers.com/showthread.php?t=1587495
Hello SGS2 users! Has anyone experienced this problem before?
I was originally running VK 5.1.2 without a problem then I flashed RR 2.5.3; didn't really like the theme then I came across PFittech ROM GTX which I thought "Wow!".
After flashing, I noticed that when the screen went off and locked, it won't wake and I need to pull battery and reboot.
As you may know that is extremely inconvenient so I flashed stock rom and went back to VK 5.1.2 but this hasn't stopped the problem
I have done all the wipes (cache, dalvik, factory/data and format system!
SwannyBhoy said:
Hello SGS2 users! Has anyone experienced this problem before?
I was originally running VK 5.1.2 without a problem then I flashed RR 2.5.3; didn't really like the theme then I came across PFittech ROM GTX which I thought "Wow!".
After flashing, I noticed that when the screen went off and locked, it won't wake and I need to pull battery and reboot.
As you may know that is extremely inconvenient so I flashed stock rom and went back to VK 5.1.2 but this hasn't stopped the problem
I have done all the wipes (cache, dalvik, factory/data and format system!
Click to expand...
Click to collapse
Ur having SOD, sleep of death... when ur phone enters deepsleep it wont get up.
this is frequently related with UV, or poor bus freq.
u should flash a kernel cleaner like this one http://forum.xda-developers.com/showthread.php?t=1363738
or any other. then u have to flash a new kernal.
Thanks mate! Will try this now
Still there
Firstly, I flashed stock firmware, then I flashed cf-root. Went into recovery and done a full wipe and flashed the script.
I done another wipe then installed VK Rom (I have never had a problem with this) and left the phone for 30 secs on screen off and it came back.
What should I do next?
Should I check all settings for CPU and GPU? Revert them to standard? I don't touch those settings as I don't have a great knowledge of changing volts and clock speeds.
Maybe you could let it on stock (unrooted) and see if it happens again...
Sent from my SGS2-I9100 powered by a SensatioN(al) 3.5 ROM
You can just wipe data, dalvic and cache and try salmanrom its the best I promise, you will never go back to another aokp rom!
Sent from my GT-I9100 using xda app-developers app
gigeaky said:
Maybe you could let it on stock (unrooted) and see if it happens again...
Sent from my SGS2-I9100 powered by a SensatioN(al) 3.5 ROM
Click to expand...
Click to collapse
Maybe u should try this, seems a good idea, just to be sure that nothing is wrong with ur phone.
I m using rootbox rom with fluxi and with a moderate uv never had any problem
Sent from my GT-I9100 using xda premium
I flashed the stock LPB firmware and used it for a full day and I never experience any SoD. Tried a few custom roms and still having the error.
Although there may seem there is nothing wrong with the phone, I have never had a problem with any roms I use. All the roms I am trying are previous downloads that have worked successfully so I doubt there is any corruption.
I won't be giving up and I will be trying everything and anything... the now I am going to try Gingerbread based roms and see if I still get the error. If anyone else has any more ideas please tell me.
SwannyBhoy said:
I flashed the stock LPB firmware and used it for a full day and I never experience any SoD. Tried a few custom roms and still having the error.
Although there may seem there is nothing wrong with the phone, I have never had a problem with any roms I use. All the roms I am trying are previous downloads that have worked successfully so I doubt there is any corruption.
I won't be giving up and I will be trying everything and anything... the now I am going to try Gingerbread based roms and see if I still get the error. If anyone else has any more ideas please tell me.
Click to expand...
Click to collapse
Can i suggest u to use rootbox ics?? Is almost flawless and i thinkbu wont have any problem
If u still getting sod u could try giving a little more voltage to ur cpu or bus...if u use fluxi with this rom is very easy to do that
Sent from my GT-I9100 using xda premium
Im a first time root user i flashed RR 2.5.3 with fluxi kernel over my stock ics its running very smoth and had no problem so far
You might need to check your cpu frequency i read her that if it was set to less than 200Mhz you might have the sleep of death issue
Can i suggest u to use rootbox ics?? Is almost flawless and i thinkbu wont have any problem
If u still getting sod u could try giving a little more voltage to ur cpu or bus...if u use fluxi with this rom is very easy to do that
Click to expand...
Click to collapse
Flashed it and crashed when i opened xxTweak after reboot wouldn't boot past the triangle. Can't get into recovery only Download mode with Jig
Im a first time root user i flashed RR 2.5.3 with fluxi kernel over my stock ics its running very smoth and had no problem so far
You might need to check your cpu frequency i read her that if it was set to less than 200Mhz you might have the sleep of death issue
Click to expand...
Click to collapse
I have tried RR 2.5.3 and had no problems in the past but now it is also giving me the SoD. Only on stock firmware I don't get it and I don't touch the cpu freq but I will take a look on the clock freqs.
SwannyBhoy said:
Flashed it and crashed when i opened xxTweak after reboot wouldn't boot past the triangle. Can't get into recovery only Download mode with Jig
I have tried RR 2.5.3 and had no problems in the past but now it is also giving me the SoD. Only on stock firmware I don't get it and I don't touch the cpu freq but I will take a look on the clock freqs.
Click to expand...
Click to collapse
Thats is pretty wierd...had u made a full wipe installation??? No one had any issue like that
Sent from my GT-I9100 using xda premium
I always do a full wipe but today I've seen something unusual.
Kernel Panic Upload Mode came up when the phone was off?
I am flashing back to GB and see if any SoD appear.
Mate, there is something wierd with ur phone...
There sure is.. I am running KI3 GB with CF Root and not received any SoD. Seems to be only on custom roms?
Good news! I fixed it!
What I did:
First of all, I had an extended battery and I swapped it for the old battery (Because of case with stand it won't fit)
Flashed stock GB (XXKI3)
Flashed CF-Root KI3
Full Wipe (Cache, Factory/Data, Dalvik, Battery stats)
Format System
Flashed Kernel Cleaner
Flashed VK 5.1.2
Flashed Siyah 3.3.2
So after doing all this, the SoD has gone. So it must be a problem with Fluxi on my device.
I may be wrong but after doing this the problem stopped and I am happy again
So thank you to you all who tried to help!
I have the same problem, except my SOD also has high battery drain even though the phone is pretty much useless. Very annoying when you are relying on the alarm clock. Did you also notice high battery drain?
I found it happened on Thebyani 4.3, not on 4.4, and now it happened on 4.5. Im hoping the kernel cleaner and the latest Siyah kernel will fix it. Any kernels you guys recommend if it still happens?
SwannyBhoy said:
Good news! I fixed it!
What I did:
First of all, I had an extended battery and I swapped it for the old battery (Because of case with stand it won't fit)
Flashed stock GB (XXKI3)
Flashed CF-Root KI3
Full Wipe (Cache, Factory/Data, Dalvik, Battery stats)
Format System
Flashed Kernel Cleaner
Flashed VK 5.1.2
Flashed Siyah 3.3.2
So after doing all this, the SoD has gone. So it must be a problem with Fluxi on my device.
I may be wrong but after doing this the problem stopped and I am happy again
So thank you to you all who tried to help!
Click to expand...
Click to collapse
well gr8 then mate!
Q: could u ever tryed giving some more voltage to cpu in fluxi?
I had a high battery drain already abd i bought a new extended battery. I am charging the device the now and it has heated but i took it off and turn it off to cool. I am going to recalibrate the battey
Try doing what I did to see if it helps.
Flash a stock unrooted firmare and see if you still get SoD
Ive been using my phone since i posted and not had one SoD.
Do you mess with your freqs? Try keeping them to basic
Sent from my GT-I9100 using xda premium
pelpa87 said:
well gr8 then mate!
Q: could u ever tryed giving some more voltage to cpu in fluxi?
Click to expand...
Click to collapse
I never ever touch the voltage. I'll stick to what i know to keep me safe
Sent from my GT-I9100 using xda premium
hi guys,
today i download the long awaited turkbey team rom v1. i did everything i read in the install instructions, so the rom did not start.
i format/clean everything, and flash again, but nothing, the only thing i see is the samsung logo ...
i flash a samsung stock rom, format/clean, flash again but nothing ...
what went wrong ??
can anybody help me please ?
thank you
austriacus said:
hi guys,
today i download the long awaited turkbey team rom v1. i did everything i read in the install instructions, so the rom did not start.
i format/clean everything, and flash again, but nothing, the only thing i see is the samsung logo ...
i flash a samsung stock rom, format/clean, flash again but nothing ...
what went wrong ??
can anybody help me please ?
thank you
Click to expand...
Click to collapse
What model do you have? international or P/G/M etc etc etc etc??
Have you tried other kernel?
Have you tried wiping/factory reset after flashing rom?
Have you checked roms thread for other people with same issue?
TheATHEiST said:
What model do you have? international or P/G/M etc etc etc etc??
Have you tried other kernel?
Have you tried wiping/factory reset after flashing rom?
Have you checked roms thread for other people with same issue?
Click to expand...
Click to collapse
my samsung is a GT - I9100 ...
before i flash the turkbey, i used rainbox v8.1 with jeboo kernel.
i flash the turkbey, see that nothing happens on start, wipe facory reset and flash again, ...
some guys had troubles too, but it seems they run the rom after flashing a second time.
now i am back on samsung stock ...
it works now
i flash a stock rom again, and change the stock kernel agains philz kernel and not like before, jeboo.
imho, rainbox rom looks nicer to me, and it runs smoother here.
in the settings menu, some text is not translated, shown in ?? turkish or so
and i miss the multi colored buttons in the status/notification bar, looks really great.
but turkbey is also a very nice rom !
thx for help
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Wipe phone flash stock rom and test and or read the rom thread .
rromao1 said:
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Click to expand...
Click to collapse
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
JJEgan said:
Wipe phone flash stock rom and test and or read the rom thread .
Click to expand...
Click to collapse
I did that and temperature stays ok
sriram231092 said:
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
Click to expand...
Click to collapse
did that as well but same happens.
funny enough I had version 5 for some time and worked fine.
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
cooza said:
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
Click to expand...
Click to collapse
there is no cutom kernel for the leaked f/w buddy
sriram231092 said:
there is no cutom kernel for the leaked f/w buddy
Click to expand...
Click to collapse
Yeah I just saw that. My bad. I guess he could always reflash the rom kernel incase its corrupt.
reinstalled rom after complete wipe and it´s working fine.
thanks
Hello I need your help about installing gustavos kernel to my galaxy S2. I flash resurrection rom which is awesome and I also want to change my kernel. But when i try to flash it, I stuck at boot screen. I try also kernel wipe before flashing but it is still same. Can anybody help me please??
Thanks indeed...
ottoasd said:
Hello I need your help about installing gustavos kernel to my galaxy S2. I flash resurrection rom which is awesome and I also want to change my kernel. But when i try to flash it, I stuck at boot screen. I try also kernel wipe before flashing but it is still same. Can anybody help me please??
Thanks indeed...
Click to expand...
Click to collapse
I am using RR as well and as far as I saw in ROM's topic, many users have faced problems with custom kernels. Especially Dorimanx versions. I only once tried Gustavo and installed it without any problem. Just flashed it in CWM and that was all. I can say that make a full wipe, install RR first and then Gustavo. That should be OK.
But after a few days with Gustavo, I returned back to the original kernel of RR. Because it is stable and no major problems. So my advice is use the ROM with it's own original kernel.
Maybe the flash wasn't clean.. Try Kernel wipe script.
banjara said:
Maybe the flash wasn't clean.. Try Kernel wipe script.
Click to expand...
Click to collapse
sertahn said:
I am using RR as well and as far as I saw in ROM's topic, many users have faced problems with custom kernels. Especially Dorimanx versions. I only once tried Gustavo and installed it without any problem. Just flashed it in CWM and that was all. I can say that make a full wipe, install RR first and then Gustavo. That should be OK.
But after a few days with Gustavo, I returned back to the original kernel of RR. Because it is stable and no major problems. So my advice is use the ROM with it's own original kernel.
Click to expand...
Click to collapse
I already try kernel wipe script but the result is same. Generally i flash with full wipe ı dont know where i make a mistake. Maybe i should wait for stable kernel)
I have flashed Gustavo's 26/3 kernel many times before but recently the same kernel file gave me status 7 error.
Try downloading your kernel file again. Maybe the file has gone corrupt.