Just wanted to know good voltages for my phone. Currently running synergy nightly 2.3.4 with ziggys latest kernel. And I have also been swing around that people use incredicontrol to increase their charge rate, how does that work do they increase the voltage or lower it? Thanks for reading
Sent from my ADR6400L using XDA App
Personally I have mine set at all speeds under by 50, anything lower than that freezes my phone. But i'm also not using synergy, i'm using liquid 3.0, which is asop and not using ziggy's kernel.
I'm running mine on all -100mv Also on ltb 2.6. I'm clueless as to the charge rate
Sent from my HTC ThunderBolt using XDA Premium App
deno24 said:
I'm running mine on all -100mv Also on ltb 2.6. I'm clueless as to the charge rate
Sent from my HTC ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
what are your CPU/governer settings?
Those of you that are on a different kernel, what is your setup? Im currently running mine at conservative. Im coming from an atrix 4g and our kernel options were very limited and we could only use interactive and powersave. Our sgs2 has so many options, I would like to see what and how everyone else's setup is working for them. Thanks guys!
Sent from my SGH-I777 using xda premium
http://forum.xda-developers.com/showthread.php?t=1321136&page=3
Sent from my GT-I9100 using XDA App
I have been wondering this for a while now and I was thinking if there is a way how far is safe.
If it is possible then what values would allow me to still have good battery life but also an over locked CPU
Sent from my XT910
I had it running at 1300mhz for awhile with no ill effects....but i was undervolted as well.
Sent from my DROID RAZR using xda premium
What program did you use to overclock and undervolt.
If you can remember what your volt values were it would be a great help ;D
Sent from my XT910
Wow, sorry i haven't been on in a while lol...over at r3ds forums there's a script you can run on your computer that will install overclocking support on your phone.
Sent from my DROID RAZR using xda premium
Okay everyone, I have completed a set of 10 custom profiles, each with a specific battery/performance setup.
There are 3 folders in the ZIP file, Fallback, HigherVolt, and NormalVolt. Fallback contains a default profile that you can flash in case something goes wrong.
In the other two folders, there will be 5 profiles each, SBatt (Super Battery), BattSave (Battery Saver), Balanced (Balanced Battery), HPerf (High Performance), and SHPerf (Super High Performance).
Super Battery has its CPU set to 200/1400, GPU set to 108/440. - System lags a bit, not too bad once the CPU/GPU turns up.
---MAXIMUM OF 3 ONLINE CORES
Battery Saver has its CPU set to 200/1600, GPU set to 108/533. - Miniscule lag.
Balanced has its CPU set to 200/1800, GPU set to 160/600. - Normal feeling system.
High Performance has its CPU set to 200/1800, GPU set to 160/733. - Only rare lag.
Super High Performance has its CPU set to 500/1800, GPU set to 350/800. - WHAT LAG?
The HigherVolt folder includes higher voltage settings for those who cannot run my low volt profiles.
MY 'NORMAL' VOLTAGE SETTINGS ARE VERY LOW, SO BE CAREFUL WITH THEM.
Instructions for Installation
Flash whatever profile you want.
Reboot.
Problems
-Tell me if there are problems (my first time making flashable ZIP files).
View attachment 1679636
Feel free to ask for a different profile, it doesn't take too long for me to create them. Ask questions via PM or comment, whichever you prefer.
Reserved...
Reserved this too..
They all flash just fine. Thanks for talking your time out to make the zips. I turned the voltages down slightly lower and I love it. Battery life is great and so is performance.
Doin' big thangs from my Note Deuce
This is just for perseus correct?
Sent from my SCH-I605 using Tapatalk 2
gammaxgoblin said:
This is just for perseus correct?
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
It's for the Stweaks app. I don't know if any other kernels run that app or can
Doin' big thangs from my Note Deuce
gammaxgoblin said:
This is just for perseus correct?
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Only kernel that has STweaks on the Note 2. That I know of.
Sent from my SCH-I605 using xda premium
Using your High Performance profile from the Higher Volt folder.
runs great and flashed well in clockwork.
Which one gives good battery life and performance?
nidhish91 said:
Which one gives good battery life and performance?
Click to expand...
Click to collapse
Any above Battery Save, up until Super High.
I use high performance on a daily basis. Get around 8-10 hours of screen on time.
Sent from my SCH-I605 using xda premium
ChaoticWeaponry said:
Any above Battery Save, up until Super High.
I use high performance on a daily basis. Get around 8-10 hours of screen on time.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
On wifi all day I'm assuming
Doin' big thangs from my Note Deuce
techgov8 said:
On wifi all day I'm assuming
Doin' big thangs from my Note Deuce
Click to expand...
Click to collapse
Yessir. Moderate usage.
Sent from my SCH-I605 using xda premium
ChaoticWeaponry said:
Yessir. Moderate usage.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Yea I'm getting 5 hours of screen time on 4G all day and getting about 21-25 hours. Luckily I'm in a great 4G area so it doesn't have to search for a signal all the time.
Doin' big thangs from my Note Deuce
Bootloop on super high performance and high performance
Sent from my SCH-I605 using xda app-developers app
riotdog7 said:
Bootloop on super high performance and high performance
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Are you using the high voltage? I tested all of my zips.
Sent from my SCH-I605 using xda premium
ChaoticWeaponry said:
Are you using the high voltage? I tested all of my zips.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Yep
Sent from my SCH-I605 using xda app-developers app
riotdog7 said:
Yep
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Hmmm. Try clearing dalvik/cache? Maybe your phone hates low voltages??
Sent from my SCH-I605 using xda premium
My result with Super high performance
Sent from my SCH-I605 using Tapatalk 2
cyberma007 said:
My result with Super high performance
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Sounds about right. Performance governor will bump that to around 19500-20000
Sent from my SCH-I605 using xda premium
ChaoticWeaponry said:
Sounds about right. Performance governor will bump that to around 19500-20000
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
And I think the Force GPU rendering adds a couple of points too.
I want to know how high other peoples devices can oc.
I can stabily run mine with 1200mhz normal oc plus20% live oc giveing me 1440mhz and runs stable just bumping up voltages for a few steps
Sent from my SGH-T959 using xda app-developers app
Back in the miui gb roms with the platypus kernel. I was stable @1500 & could benchmark @1600. Never had any luck or patience messing with the voltage.
Sent from my Nexus 4 using Tapatalk 2
Same here on cm7. But now I can't go above 1.44ghz without it locking up and rebooting
Sent from my SGH-T959 using xda app-developers app