Ok so first off i rooted droid razr 2.3.6 and then i installed cwm recovery and tried to flash cm9 from droidhive.com so then i reboot the system and its stuck at the boot logo and i can turn it off but i have to hold volume down and volume up and power button. I can also boot into android recovery but not cwm recovery. HELP!
Beeyoth said:
Ok so first off i rooted droid razr 2.3.6 and then i installed cwm recovery and tried to flash cm9 from droidhive.com so then i reboot the system and its stuck at the boot logo and i can turn it off but i have to hold volume down and volume up and power button. I can also boot into android recovery but not cwm recovery. HELP!
Click to expand...
Click to collapse
there is another forum which i posted for help check.....my razr is also on the same situation....
Maybe try this?
http://www.droidrzr.com/index.php/t...ootloopbad-flash-using-rsd-lite-and-fastboot/
blueis300 said:
Maybe try this?
http://www.droidrzr.com/index.php/t...ootloopbad-flash-using-rsd-lite-and-fastboot/
Click to expand...
Click to collapse
didnt work
It will work if you had chosen the right package, just choose the original package of you phone, specified your model and region. Find out here
sbf.droid-developers.org
Then boot in AP Fastboot or some other, USB connected, then RSD Lite will show there was a device connected. unzip the package you downloaded, open the XXXXXXXX.xml in RSD Lite and click start.........After a little while, everything back to normal
loachh said:
It will work if you had chosen the right package, just choose the original package of you phone, specified your model and region. Find out here
sbf.droid-developers.org
Then boot in AP Fastboot or some other, USB connected, then RSD Lite will show there was a device connected. unzip the package you downloaded, open the XXXXXXXX.xml in RSD Lite and click start.........After a little while, everything back to normal
Click to expand...
Click to collapse
Thank You! IT WORKED! I give you a thank you
Related
Hello.
I have a Motorola XT531, rooted. I wanted to make a full backup and I installed ClockworkMod ROM Manager. When I expected the phone to reboot into recovery mode, the screen went completely blank.
I took off the battery and put it back. When I press the power button, the phone vibrates but nothing more happens, the screen stays blank. The same happens if I press and hold any of the three h/w buttons (volume +, vol -, camera) when powering on (I don't know exactly which one should enter recovery).
If I connect the phone to the PC thru the USB cable, it's not recognized ("adb devices" shows nothing attached).
So, is it bricked?
Done
I flashed a stock rom image and it's working now.
Help me!!!!!
How did you do?
Explain it, maybe I can repair my xt531
Thanks for your help
carperey said:
How did you do?
Explain it, maybe I can repair my xt531
Thanks for your help
Click to expand...
Click to collapse
I've used RSD Lite to flash a stock SBF file.
There are several tutorials on how to use RSD Lite on these forums.
The SBF file I don't remember exactly where I got it from, it's the Brazil Retail version, and worked fine for me here in Argentina. In this thread there are some links to other SBF files from around the world: http://forum.xda-developers.com/showthread.php?t=1271114
Thanks you... but the RSD does not recognize the xt531:thumbup:
Enviado desde mi LG-C660h usando Tapatalk 2
carperey said:
Thanks you... but the RSD does not recognize the xt531:thumbup:
Click to expand...
Click to collapse
Just in case... Don't forget to extract the .sbf file from the .rar/.zip archive you may have downloaded.
Hello, I am new to this forum.
I will try to explain the best that I can about how I got into this situation.
I was previously running on ICS 4.0.4(don't really know if it is .211 or .214 or something.). I tried to root it using Matt's Droid Razr Utility 1.7. I didn't really know what to do and was stupid enough to follow the video in the help thread(which was for upgrading from GB rather than rooting an ICS). Then I panicked.
I used option 1, followed by option 9, followed by option 3, followed by option 2, and then all four in random orders. Later on, I realized that I had to recover from the .211 file in the sd card after option 1(failure on my part). However, now whenever I try to enter recovery, I get Invalid Flash Mode Boot failure, whereas a normal boot will give me Invalid Flash Mode Flash failure.
I tried to use ADB tools and it didn't work.
Then I tried Utility 1.81. My driver is the same as the one provided, and the cable is the one that came along with the charger and phone.
My phone carrier is Singtel.
Any way out of this? Thanks in advance.
is it possible to enter fastboot ??
if so try to grab an image in development section wich you can place on your phone with RSD lite.
misterx11 said:
is it possible to enter fastboot ??
if so try to grab an image in development section wich you can place on your phone with RSD lite.
Click to expand...
Click to collapse
I can enter fastboot, and only fastboot. Attempting to enter any BP or recovery will result in the failures.
I just downloaded a stock rom for my phone. I'll see how it turns out.
Thank you for your time.
im in a similar situation, my phone is bricked, how do u enter fastboot? and where can i get a rom to use in rsd lite?
rageofshadow said:
I can enter fastboot, and only fastboot. Attempting to enter any BP or recovery will result in the failures.
I just downloaded a stock rom for my phone. I'll see how it turns out.
Thank you for your time.
Click to expand...
Click to collapse
chip0 said:
im in a similar situation, my phone is bricked, how do u enter fastboot? and where can i get a rom to use in rsd lite?
Click to expand...
Click to collapse
Do yall have XT910 or XT912 i.e. GSM or CDMA...
circleofomega said:
Do yall have XT910 or XT912 i.e. GSM or CDMA...
Click to expand...
Click to collapse
Since the thread name is Droid razr i think it is xt912
Go fast boot (power off your phone[if you cant then push and hold vol down+vol up and power button the same time, when you see your display flashed quickly release all buttons and press them again and hold- you should get boot menu and then use vol down to get on AP fastboot and use vol up to select it]).
Then use rsd lite and FXZ files to get your phone running, no need for any kind of wipe after this. Wait until rsd lite says finished.
What fxz files do I use? I've tried like 3 different ones and they always fail
Sent from my DROID RAZR using xda app-developers app
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
not screwed
promoking said:
Hello Guys,
Yesterday I received my ATT LG E970 Phone, I was trying to remove ATT Apps from the phone. So, I did using ..
http://forum.xda-developers.com/showthread.php?t=2006946 >> How to "root" your Optimus G
Then it installed SuperSU on my phone. After that I unstalled an Uninstaller APP from Playstore and uninstalled all ATT as well as some Google Apps.
Now, I did reboot and EveryBAD thing happens from here. I got stuck at LG Logo .. It saying "Security Error". After that I serached on xDA Forum for solution of it. And I found this guide ..
http://forum.xda-developers.com/showthread.php?t=2230994
After reading it I installed LGNPST and connected phone in "DOWNLOAD Mode" and downloaded TeenyBin and did as per his manual. But unfortunately first option didn't worked. So , I used Alternete Tennybin File.
After Rebooting, I got a Google Logo instead of LG.. Don't know and as per instructions I entered in Fast Boot mode. In fast Boot mode some Green Android icon came and I can change the setting using volume + and - button. I eneterd from there in RECOVERY Mode.
After pressing Power in Recovery Mode of Green Android the phone rebooted and It eneterd in "Team Win Recovery Project". I din't know what to do with it. After some searching I did a Factory Reset using Wipe button in "Team Win Recovery Project". and Rebooted but still Noting Happened. Phone restarted with Google Logo and there after nothing comes :S
After that I agin entered in Fast Boot Mode.. using Vol + and Power buttton together and eneterd in Recovery mode and again went to Wipe in "Team Win Recovery Project" and then Advanced and selected all folders and Deleted all. After that I rebooted using "Team Win Recovery Project" but it said NO OS INSTALLED.
I was totally stuck. I don't know what to do. Finally I slept with 8 hrs Messed. I woke up in morning and phone is not even Starting now. When I connect to Charger. Red Light Blinks in power button n then Goes OFF. and I tried connecting it to PC too via USB but again same happens. The PC didn't recognized the Phone. I also Tried in DEVICE Manger, but No use. I can't see any Device there too. :S
Please Help WHAT Should I DO NOW ????
Any help will be really appreciated.
PS : It was ATT Unlocked phone. I don't have any warranty.
Click to expand...
Click to collapse
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
hope he follows up with a thank you.
milindchitale said:
Hi,
dont panic, I went thru exactly the same process right up till the TWRP and wipe. All you need to do is get hold of the stock rooted rom zip from here:
Then copy it onto your sdcard, for which you can connect to the computer using Advanced menu of the TWRP, and load the sdcard, which will connect as USB storage to PC.
Then once file is on sd card, just go back to main TWRP meny and select install option, then select the zip file you just copied.
Let TWRP do its stuff, then do a factory reset / then go into reboot system.
Wish you all the best. Once the ROM has installed, now you can search for the latest TWRP, install it then go on to latest kit kat roms in exactly the same way.
milind
Click to expand...
Click to collapse
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hii,
Finally I reached on TWRP. Can I copy the Stock ROM Zip file in Memory Card and then install memory card on phone. And from Install in TWRP I can go the SD Card location and install it from there? Possible ?
Actually there was no battery on phone that is why the phone was not booting up to TWRP mode. Now I'm in TWRP and downloading Stock ROM. Hope it get fixed soon.
Many Thanks and Regards
promoking said:
Thank you bro for prompt reply. But Now I'm not getting TWRP from morning. When I connect to USB Notification Light Blinks and goes off. I'm unable to charge as well. How to boot up to TWRP. Moreover where to get stock Rooted ROM Zip?
Also I have downloaded this yesterday ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
If this is the Custom Rom for my phone. (ATT LG E970)? Or I have to download some different ROM ?
Well, first thing how to get it to TWRP. I'm unable to get it from Morning :S
Click to expand...
Click to collapse
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
adfurgerson said:
That file is stock firmware inside the zip is a .tot file that can be renamed to .bin and used with lgnpst to bring the phone back to stock. You would need to be able to get into download mode
again. If you do use the g33k3r file you would need to root again then use Freegee app from play store to unlock bootloader and install recovery.
Click to expand...
Click to collapse
Hi,
Now I'm downloading ...
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
I guess this is original ATT LG E970 Firmware. I will copy it into my external Memory Card and then will insert into phone. After that using TWRP I'll be going to use this Zip file and after that factory reset. Am I correct ? Do I need to follow different steps ?
Let me know. Moreover do I need to unlock Phone again? When I received it was already in Unlocked State. So installing the above link firmware will lock it again? Or should I proceed with the link I posted earlier, I mean this ..
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
And Rename File to .bin instead of .tot and Make ZIP it again ?
Please let me know.
PS ; I'm still Downloading The firmware from Ist link.
Regards
milindchitale said:
Get into bootloader by pressing volume up + power key simultaneously. Then press volume down key twice only. Next press power key once.
Rom you downloaded can be verified by search for Stock Rooted rom versio 20j. Hope u get thru ur troubles. Dont forget to press thanks button.
Cheers. Milind
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Hi, I tried these ROMS,
ttp://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip
and downloaded today ..
ttp://downloads.codefi.re/thecubed/lgoptimusg/att/firmware/LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip
Both are not working. ON TWRP it is saying ..
MD5 File NOT FOUND
ZIP File Signature VERIFICATION FAILED
Error in Flashing Zip
Please help?
Edit : I also tried Unticking ZIP File Verification. But still it says .. "Error in Flashing Zip"
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
pottyvick said:
I did this from the forum @carrett started:
Obtain the following files: AutoLGNPST-tSilenzio.zip (available on IRC or googling), and the firmware (http://forum.xda-developers.com/showthread.php?t=2219953). Unzip AutoLGNPST-tSilenzio.zip and follow the instructions in "READ ME FIRST.txt" (mad props to tSilenzio for automating this process).
Click to expand...
Click to collapse
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
promoking said:
Hi ..
I have already downloaded the above firmware yesterday. Moreover I'm unable to enter in Download mode as phone is in Recovery Mode in TWRP.
Click to expand...
Click to collapse
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
pottyvick said:
make sure to download the first file too.... to get to download mode just use twrp's reboot menu... from what i remember it has a reboot to bootloader. From there you can use the volume keys to select Download mode and push the power button to go into it...
Click to expand...
Click to collapse
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
promoking said:
I tried reboot to boot loader but unfortunately it takes me back to Fast Boot mode (in green Andriod screen) :/
I also tried all options of reboot but no use. Either the phone comes in Fast Boot mode or Power off.
Click to expand...
Click to collapse
in fast boot, what happens when you push the volume down button?
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
promoking said:
Moreover I get following details in Fast boot Home Mode :-
FASTBOOT Mode.
Product_Name : mako
Variant : mako 16gb
HW Version - rev10(88)
Bootloader Version - MAKOZ10f
BaseBand Version - NA
Carrier Info - None
Serial No . - XXXXXXX
SIGNING - production
Secure Boot - Enabled
LOCK State - Unlocked
And above it there is green figure. Above it I have options to get into Recovery Mode. Other than that it I don't have any options to go into Download mode or anything else.
Click to expand...
Click to collapse
push the volume buttons, it will change the recovery mode to other options... Push the volume buttons on the handset...
pottyvick said:
in fast boot, what happens when you push the volume down button?
Click to expand...
Click to collapse
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
promoking said:
In fastboot mode when I put Volume - or down button I get options as follows :-
Power Off
Recovery Mode
Restart Bootloader
Start
PS : Sorry for late posting. This forum asks me to WAIT 5 mins, to post next. The moderator need to verify my account. :S
Click to expand...
Click to collapse
sorry, you're right... have you tried to manually get into download mode?
Poweroff phone>connect usb cable to phone (not to computer yet)>hold down (both) volume up/volume down>connect usb to computer (while holding down volume buttons)
pottyvick said:
It gives you only those 4 options? there is no other option>?
Click to expand...
Click to collapse
No Sir, I get only these 4 options above that Green Figure.
promoking said:
No Sir, I get only these 4 options above that Green Figure.
Click to expand...
Click to collapse
I edited my comment sorry...
Hello,
I tried to update a friends XT910. He was running 4.0.4. I followed this tutorial. To install Clockwork Recovery, I followed this tutorial. And then, I flashed the rom (and gapps) from this link (Slim Kat). It installed fine, but then when I rebooted, I get the Moto Dual Core logo, it stays for about 30 seconds, and then blank screen. It doesn't automatically restart, it just shuts down.
If I hold down the Volume down + Power button, I get the AP fastboot menu. If I hold down Volume up + Volume down + Power buttons together, I get this green Android guy on the floor, with a red triangle in the middle. If I press the volume keys, it goes into the recovery.
What do I do! How do I get it to work again? Please help!
firefiber said:
Hello,
I tried to update a friends XT910. He was running 4.0.4. I followed this tutorial. To install Clockwork Recovery, I followed this tutorial. And then, I flashed the rom (and gapps) from this link (Slim Kat). It installed fine, but then when I rebooted, I get the Moto Dual Core logo, it stays for about 30 seconds, and then blank screen. It doesn't automatically restart, it just shuts down.
If I hold down the Volume down + Power button, I get the AP fastboot menu. If I hold down Volume up + Volume down + Power buttons together, I get this green Android guy on the floor, with a red triangle in the middle. If I press the volume keys, it goes into the recovery.
What do I do! How do I get it to work again? Please help!
Click to expand...
Click to collapse
When green android with a red triangle appears,press the volume keys and select factory/data reset option.
But you shouldn't instal clockwork,that's old recovery,now you have Safestrap or BootMenuManager.
Sent from my Razr XT910
welder73 said:
When green android with a red triangle appears,press the volume keys and select factory/data reset option.
Sent from my Razr XT910
Click to expand...
Click to collapse
And then what?
firefiber said:
And then what?
Click to expand...
Click to collapse
And then wait for it to finish.
Sent from my Razr XT910
welder73 said:
And then wait for it to finish.
Sent from my Razr XT910
Click to expand...
Click to collapse
Okay, it's done. Now should I reboot? Or should I do aything else?
firefiber said:
Okay, it's done. Now should I reboot? Or should I do aything else?
Click to expand...
Click to collapse
Yes,reboot.
Sent from my Razr XT910
welder73 said:
Yes,reboot.
Sent from my Razr XT910
Click to expand...
Click to collapse
I did that, but it's still the same thing. It boots, shows the Moto Dual Core technology logo, stays for about 30 seconds, and then black screen. It doesn't reboot. It just shuts down.
Anyone?
firefiber said:
I did that, but it's still the same thing. It boots, shows the Moto Dual Core technology logo, stays for about 30 seconds, and then black screen. It doesn't reboot. It just shuts down.
Anyone?
Click to expand...
Click to collapse
Looks like you've bricked it...same as I did few months ago. I suggest flashing stock firmware all over again using RSD Lite, then rooting the device and installing Safestrap recovery. Search my posts here and you'll find detailed instructions on how to do it.
Lincoln357 said:
Looks like you've bricked it...same as I did few months ago. I suggest flashing stock firmware all over again using RSD Lite, then rooting the device and installing Safestrap recovery. Search my posts here and you'll find detailed instructions on how to do it.
Click to expand...
Click to collapse
Okay so what I'm gonna do is:
1. Delete CID: fastboot erase cid
2. Flash stock firmware (does the region matter at all, since I've removed the CID? This list has 4.0.4 but from Brazil, does this matter?
3. Follow this tutorial to root it again
4. Install SafeStrap.
Anything I'm missing?
firefiber said:
Okay so what I'm gonna do is:
1. Delete CID: fastboot erase cid
2. Flash stock firmware (does the region matter at all, since I've removed the CID? This list has 4.0.4 but from Brazil, does this matter?
3. Follow this tutorial to root it again
4. Install SafeStrap.
Anything I'm missing?
Click to expand...
Click to collapse
First of all, you've forgot to hit thanks button
Firmware doesn't matter as long it's for GSM version...I tried several of them and it only booted with taiwanese firmware. These steps seem fine, try it until your battery drains, after that you'll need factory cable to flash it.
see if that helps...RSDLITE restore and then you can root by
(Use this Rooting method only on ICS 4.0.4)
Hi, I just started flashing for the first time.
I first did a root using EternityProject EasyRootICS v1.5.
Then I installed recovery Razr ClockWorkMod Touch 5.8.4.5 Black Edition and made a backup.
Then I flashed this rom ([ROM][4.4.4][AOSP][CDMA/GSM][Unofficial] SlimKat)
I did a clean install and after pressing reboot, it stays a blank screen. When I disconnect my USB, I hear the sound of a device disconnecting vice versa meaning my phone is still working??
My previous android was running 4.0.4.
Please help?
cheaterbug said:
Hi, I just started flashing for the first time.
I first did a root using EternityProject EasyRootICS v1.5.
Then I installed recovery Razr ClockWorkMod Touch 5.8.4.5 Black Edition and made a backup.
Then I flashed this rom ([ROM][4.4.4][AOSP][CDMA/GSM][Unofficial] SlimKat)
I did a clean install and after pressing reboot, it stays a blank screen. When I disconnect my USB, I hear the sound of a device disconnecting vice versa meaning my phone is still working??
My previous android was running 4.0.4.
Please help?
Click to expand...
Click to collapse
I've tried holding the power button and volume down button. It manages to restart and I see my motorolo logo, and once it finishes loading, it goes back to blank screen again. My computer registers the device connected as it plays the sound, but the screen is still blank! Any help please?
cheaterbug said:
Hi, I just started flashing for the first time.
I first did a root using EternityProject EasyRootICS v1.5.
Then I installed recovery Razr ClockWorkMod Touch 5.8.4.5 Black Edition and made a backup.
Then I flashed this rom ([ROM][4.4.4][AOSP][CDMA/GSM][Unofficial] SlimKat)
I did a clean install and after pressing reboot, it stays a blank screen. When I disconnect my USB, I hear the sound of a device disconnecting vice versa meaning my phone is still working??
My previous android was running 4.0.4.
Please help?
Click to expand...
Click to collapse
You shouldn't install CWM,you must install Safestrap or BootMenuManager.
I suggest you to go back to stock with RSD Lite and start over.
Sent from my Razr XT910
welder73 said:
You shouldn't install CWM,you must install Safestrap or BootMenuManager.
I suggest you to go back to stock with RSD Lite and start over.
Sent from my Razr XT910
Click to expand...
Click to collapse
OMG Thanks for your reply! I've just looked into RSD Lite and I can't power off my phone... It is actually on, and when i press power and volume down, it restarts it! What do I do to enter RDS Lite?
Ok, I got it by holding power and volume down, and once it blacks out, let go of power button and hold volume up button..
Now onto RDS Lite, it's saying failed flashing process. 1/24 flash cdt.bin_signed -> Phone returned failed
cheaterbug said:
OMG Thanks for your reply! I've just looked into RSD Lite and I can't power off my phone... It is actually on, and when i press power and volume down, it restarts it! What do I do to enter RDS Lite?
Click to expand...
Click to collapse
Shut it down and immediately press vol- vol + and power button.
Then with vol- button scroll to AP Fastboot mode and select it with vol+ button
Sent from my Razr XT910
welder73 said:
Shut it down and immediately press vol- vol + and power button.
Then with vol- button scroll to AP Fastboot mode and select it with vol+ button
Sent from my Razr XT910
Click to expand...
Click to collapse
welder73!! Please don't leave me!!
I have already passed that step... Now RSD Lite is failing for me... Can you help me please? I'll tell you what is happening..
cheaterbug said:
welder73!! Please don't leave me!!
I have already passed that step... Now RSD Lite is failing for me... Can you help me please? I'll tell you what is happening..
Click to expand...
Click to collapse
Which fastboot file you trying to flash? What is your region?
Sent from my Razr XT910
welder73 said:
Which fastboot file you trying to flash? What is your region?
Sent from my Razr XT910
Click to expand...
Click to collapse
They are limiting how many messages I can post, only 1 post every 5 minutes!
My fast boot file I used is Blur_Version.982.124.18.XT910.Fido.en.CA. Is it alright if the phone was bought from Malaysia?
cheaterbug said:
They are limiting how many messages I can post, only 1 post every 5 minutes!
My fast boot file I used is Blur_Version.982.124.18.XT910.Fido.en.CA. Is it alright if the phone was bought from Malaysia?
Click to expand...
Click to collapse
That is JB or ICS?
I don´t for sure what firmware is for your country,I searched a little just now,some people saying that this Android 4.0.4
Blur_Version.673.94.328.XT910.PSHAsiaRetail.en.03 is for Malaysia.
welder73 said:
That is JB or ICS?
I don´t for sure what firmware is for your country,I searched a little just now,some people saying that this Android 4.0.4
Blur_Version.673.94.328.XT910.PSHAsiaRetail.en.03 is for Malaysia.
Click to expand...
Click to collapse
Thanks so much welder. I am downloading Blur_Version.673.94.328.XT910.PSHAsiaRetail.en.03 now. The one I downloaded fails at 6/24... I will try this one. Thank you so much for being with me... I would like to buy you a beer some time.