Hi, I just started flashing for the first time.
I first did a root using EternityProject EasyRootICS v1.5.
Then I installed recovery Razr ClockWorkMod Touch 5.8.4.5 Black Edition and made a backup.
Then I flashed this rom ([ROM][4.4.4][AOSP][CDMA/GSM][Unofficial] SlimKat)
I did a clean install and after pressing reboot, it stays a blank screen. When I disconnect my USB, I hear the sound of a device disconnecting vice versa meaning my phone is still working??
My previous android was running 4.0.4.
Please help?
cheaterbug said:
Hi, I just started flashing for the first time.
I first did a root using EternityProject EasyRootICS v1.5.
Then I installed recovery Razr ClockWorkMod Touch 5.8.4.5 Black Edition and made a backup.
Then I flashed this rom ([ROM][4.4.4][AOSP][CDMA/GSM][Unofficial] SlimKat)
I did a clean install and after pressing reboot, it stays a blank screen. When I disconnect my USB, I hear the sound of a device disconnecting vice versa meaning my phone is still working??
My previous android was running 4.0.4.
Please help?
Click to expand...
Click to collapse
I've tried holding the power button and volume down button. It manages to restart and I see my motorolo logo, and once it finishes loading, it goes back to blank screen again. My computer registers the device connected as it plays the sound, but the screen is still blank! Any help please?
cheaterbug said:
Hi, I just started flashing for the first time.
I first did a root using EternityProject EasyRootICS v1.5.
Then I installed recovery Razr ClockWorkMod Touch 5.8.4.5 Black Edition and made a backup.
Then I flashed this rom ([ROM][4.4.4][AOSP][CDMA/GSM][Unofficial] SlimKat)
I did a clean install and after pressing reboot, it stays a blank screen. When I disconnect my USB, I hear the sound of a device disconnecting vice versa meaning my phone is still working??
My previous android was running 4.0.4.
Please help?
Click to expand...
Click to collapse
You shouldn't install CWM,you must install Safestrap or BootMenuManager.
I suggest you to go back to stock with RSD Lite and start over.
Sent from my Razr XT910
welder73 said:
You shouldn't install CWM,you must install Safestrap or BootMenuManager.
I suggest you to go back to stock with RSD Lite and start over.
Sent from my Razr XT910
Click to expand...
Click to collapse
OMG Thanks for your reply! I've just looked into RSD Lite and I can't power off my phone... It is actually on, and when i press power and volume down, it restarts it! What do I do to enter RDS Lite?
Ok, I got it by holding power and volume down, and once it blacks out, let go of power button and hold volume up button..
Now onto RDS Lite, it's saying failed flashing process. 1/24 flash cdt.bin_signed -> Phone returned failed
cheaterbug said:
OMG Thanks for your reply! I've just looked into RSD Lite and I can't power off my phone... It is actually on, and when i press power and volume down, it restarts it! What do I do to enter RDS Lite?
Click to expand...
Click to collapse
Shut it down and immediately press vol- vol + and power button.
Then with vol- button scroll to AP Fastboot mode and select it with vol+ button
Sent from my Razr XT910
welder73 said:
Shut it down and immediately press vol- vol + and power button.
Then with vol- button scroll to AP Fastboot mode and select it with vol+ button
Sent from my Razr XT910
Click to expand...
Click to collapse
welder73!! Please don't leave me!!
I have already passed that step... Now RSD Lite is failing for me... Can you help me please? I'll tell you what is happening..
cheaterbug said:
welder73!! Please don't leave me!!
I have already passed that step... Now RSD Lite is failing for me... Can you help me please? I'll tell you what is happening..
Click to expand...
Click to collapse
Which fastboot file you trying to flash? What is your region?
Sent from my Razr XT910
welder73 said:
Which fastboot file you trying to flash? What is your region?
Sent from my Razr XT910
Click to expand...
Click to collapse
They are limiting how many messages I can post, only 1 post every 5 minutes!
My fast boot file I used is Blur_Version.982.124.18.XT910.Fido.en.CA. Is it alright if the phone was bought from Malaysia?
cheaterbug said:
They are limiting how many messages I can post, only 1 post every 5 minutes!
My fast boot file I used is Blur_Version.982.124.18.XT910.Fido.en.CA. Is it alright if the phone was bought from Malaysia?
Click to expand...
Click to collapse
That is JB or ICS?
I don´t for sure what firmware is for your country,I searched a little just now,some people saying that this Android 4.0.4
Blur_Version.673.94.328.XT910.PSHAsiaRetail.en.03 is for Malaysia.
welder73 said:
That is JB or ICS?
I don´t for sure what firmware is for your country,I searched a little just now,some people saying that this Android 4.0.4
Blur_Version.673.94.328.XT910.PSHAsiaRetail.en.03 is for Malaysia.
Click to expand...
Click to collapse
Thanks so much welder. I am downloading Blur_Version.673.94.328.XT910.PSHAsiaRetail.en.03 now. The one I downloaded fails at 6/24... I will try this one. Thank you so much for being with me... I would like to buy you a beer some time.
Related
hello everybody
i had installed the THE ARCTIC - EternityProject rom for the droid razr gsm xt910
and i decided to change the theme, so therefore i rebooted from bootstrap to recovery and simply flashed the theme of ics on it, and now im stuck in loop of the ics intro screen as if its loading and loading and loading.....
im not sure what to do as of this moment the phone is still in a loop. so if somebody can help me that would be great.
thank you very much
my phone has started to heat up pretty bad if somebody can reply i'll be greatful thanks
Hold power button to turn off the phone. Boot into recovery, cwm or what you are using and wipe cache and clear dalvik and see if that helps.
i am now stuck at the sign of a droid with exclamation mark in a triangle...
Hold the power button and both volume buttons. First option should be recovery. Hit the volume up key to select and it should reboot. Atleast my cdma razr does.
that makes it reboot and back to the loop again. argh....how to get to recovery ?
Yeah on my cdma phone the power button and both volume keys work.
it says the phone is locked i think its bricked. but since its working and i can see alot of things and stuff it must be soft bricked. i got into boot menu as well but i dont know what to do from there
any ideas ?>
naifs_br10 said:
it says the phone is locked i think its bricked. but since its working and i can see alot of things and stuff it must be soft bricked. i got into boot menu as well but i dont know what to do from there
any ideas ?>
Click to expand...
Click to collapse
On my phone atleast , if I hold the power and volume down it comes to a screen that says locked. Thats in fastboot mode. If I hold power and both volume keys it brings you to a menu with several different options which says to use keys to toggel up or down.
i can only access the one holding power button down and volume keys up and down
naifs_br10 said:
i can only access the one holding power button down and volume keys up and down
Click to expand...
Click to collapse
This menu you're accessing is blue or white?
Device is locked, all regular razr are. lol
Do you have a cam? Take a pic it will save prescious time.
Sent from my XT910 using Tapatalk 2
white and it says boot menu on top of it with couple of options
naifs_br10 said:
white and it says boot menu on top of it with couple of options
Click to expand...
Click to collapse
Ok.
It's the default ap fastboot from razr, you had to flash artic trhough razr bootstrap, anothet cwm. So..
while in this white screen, press and hold power and vo l+/-
This will drive you to bootmenu
In boot menu pick recovery (vol down)
Then press vol up to entet recovery
Wait for red moto logo, give it 5s and press vol up/down
This will open recovery menu
In that go factory reset and press power button
wait it finish, you should be good to go
If doesn't work you'll have to flash a new rom with rsd lite. Try what I said 1st
Sent from my XT910 using Tapatalk 2
http://www.mobile-telephone.info/?p=691
Look at this video.
Do you see any of the 2 white screens we were talking bout?
AT 2:47 then 3:02 are the 2 different screen we or I was talking about.
---------- Post added at 05:22 PM ---------- Previous post was at 05:15 PM ----------
pedrotorresfilho said:
Ok.
It's the default ap fastboot from razr, you had to flash artic trhough razr bootstrap, anothet cwm. So..
while in this white screen, press and hold power and vo l+/-
This will drive you to bootmenu
In boot menu pick recovery (vol down)
Then press vol up to entet recovery
Wait for red moto logo, give it 5s and press vol up/down
This will open recovery menu
In that go factory reset and press power button
wait it finish, you should be good to go
If doesn't work you'll have to flash a new rom with rsd lite. Try what I said 1st
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Well said.
edit: its not stuck at the blue screen that is usually the one for artic. its looping into booting on that now
thanks guys the phone has rebooted but now once it starts up its rebooting randomly on its own continously once it goes into the welcome screen of android lol.
pedrotorresfilho said:
Ok.
It's the default ap fastboot from razr, you had to flash artic trhough razr bootstrap, anothet cwm. So..
while in this white screen, press and hold power and vo l+/-
This will drive you to bootmenu
In boot menu pick recovery (vol down)
Then press vol up to entet recovery
Wait for red moto logo, give it 5s and press vol up/down
This will open recovery menu
In that go factory reset and press power button
wait it finish, you should be good to go
If doesn't work you'll have to flash a new rom with rsd lite. Try what I said 1st
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
blueis300 said:
http://www.mobile-telephone.info/?p=691
Look at this video.
Do you see any of the 2 white screens we were talking bout?
AT 2:47 then 3:02 are the 2 different screen we or I was talking about.
---------- Post added at 05:22 PM ---------- Previous post was at 05:15 PM ----------
Well said.
Click to expand...
Click to collapse
naifs_br10 said:
thanks guys the phone has rebooted but now once it starts up its rebooting randomly on its own continously once it goes into the welcome screen of android lol.
Click to expand...
Click to collapse
Repeat process but instead factory reset do wipe cache
Nice to rear it works
Thanks
If this don't fix then you will need to flash a new rom with RSD Lite, just make sure you have at least 50% of battery before flashing
Edit: > Do u have a xt910 or a verizon xt912?
Sent from my XT910 using Tapatalk 2
edit: after wiping cache the problem still exists, phone is still rebooting back and forth, ....
thanks alot, now to avoid this my friend, how should i have flashed the ics theme from artic to avoid this kind of thing in the future ?
Did you wipe before or after the theme flash or just install and reboot?
i just rebooted into recovery from bootstrap and flashed the theme and that was it
blueis300 said:
Did you wipe before or after the theme flash or just install and reboot?
Click to expand...
Click to collapse
naifs_br10 said:
i just rebooted into recovery from bootstrap and flashed the theme and that was it
Click to expand...
Click to collapse
How did you installed bootstrap?
Sent from my XT910 using Tapatalk 2
Hello,
I tried to update a friends XT910. He was running 4.0.4. I followed this tutorial. To install Clockwork Recovery, I followed this tutorial. And then, I flashed the rom (and gapps) from this link (Slim Kat). It installed fine, but then when I rebooted, I get the Moto Dual Core logo, it stays for about 30 seconds, and then blank screen. It doesn't automatically restart, it just shuts down.
If I hold down the Volume down + Power button, I get the AP fastboot menu. If I hold down Volume up + Volume down + Power buttons together, I get this green Android guy on the floor, with a red triangle in the middle. If I press the volume keys, it goes into the recovery.
What do I do! How do I get it to work again? Please help!
firefiber said:
Hello,
I tried to update a friends XT910. He was running 4.0.4. I followed this tutorial. To install Clockwork Recovery, I followed this tutorial. And then, I flashed the rom (and gapps) from this link (Slim Kat). It installed fine, but then when I rebooted, I get the Moto Dual Core logo, it stays for about 30 seconds, and then blank screen. It doesn't automatically restart, it just shuts down.
If I hold down the Volume down + Power button, I get the AP fastboot menu. If I hold down Volume up + Volume down + Power buttons together, I get this green Android guy on the floor, with a red triangle in the middle. If I press the volume keys, it goes into the recovery.
What do I do! How do I get it to work again? Please help!
Click to expand...
Click to collapse
When green android with a red triangle appears,press the volume keys and select factory/data reset option.
But you shouldn't instal clockwork,that's old recovery,now you have Safestrap or BootMenuManager.
Sent from my Razr XT910
welder73 said:
When green android with a red triangle appears,press the volume keys and select factory/data reset option.
Sent from my Razr XT910
Click to expand...
Click to collapse
And then what?
firefiber said:
And then what?
Click to expand...
Click to collapse
And then wait for it to finish.
Sent from my Razr XT910
welder73 said:
And then wait for it to finish.
Sent from my Razr XT910
Click to expand...
Click to collapse
Okay, it's done. Now should I reboot? Or should I do aything else?
firefiber said:
Okay, it's done. Now should I reboot? Or should I do aything else?
Click to expand...
Click to collapse
Yes,reboot.
Sent from my Razr XT910
welder73 said:
Yes,reboot.
Sent from my Razr XT910
Click to expand...
Click to collapse
I did that, but it's still the same thing. It boots, shows the Moto Dual Core technology logo, stays for about 30 seconds, and then black screen. It doesn't reboot. It just shuts down.
Anyone?
firefiber said:
I did that, but it's still the same thing. It boots, shows the Moto Dual Core technology logo, stays for about 30 seconds, and then black screen. It doesn't reboot. It just shuts down.
Anyone?
Click to expand...
Click to collapse
Looks like you've bricked it...same as I did few months ago. I suggest flashing stock firmware all over again using RSD Lite, then rooting the device and installing Safestrap recovery. Search my posts here and you'll find detailed instructions on how to do it.
Lincoln357 said:
Looks like you've bricked it...same as I did few months ago. I suggest flashing stock firmware all over again using RSD Lite, then rooting the device and installing Safestrap recovery. Search my posts here and you'll find detailed instructions on how to do it.
Click to expand...
Click to collapse
Okay so what I'm gonna do is:
1. Delete CID: fastboot erase cid
2. Flash stock firmware (does the region matter at all, since I've removed the CID? This list has 4.0.4 but from Brazil, does this matter?
3. Follow this tutorial to root it again
4. Install SafeStrap.
Anything I'm missing?
firefiber said:
Okay so what I'm gonna do is:
1. Delete CID: fastboot erase cid
2. Flash stock firmware (does the region matter at all, since I've removed the CID? This list has 4.0.4 but from Brazil, does this matter?
3. Follow this tutorial to root it again
4. Install SafeStrap.
Anything I'm missing?
Click to expand...
Click to collapse
First of all, you've forgot to hit thanks button
Firmware doesn't matter as long it's for GSM version...I tried several of them and it only booted with taiwanese firmware. These steps seem fine, try it until your battery drains, after that you'll need factory cable to flash it.
see if that helps...RSDLITE restore and then you can root by
(Use this Rooting method only on ICS 4.0.4)
Hi everyone,
I am writing in order to find a helping hint to rescue my Motorola Razr XT910...
I was just trying to install another ROM via BMM, wiped everything, tried to reboot to BMM again because I inserted a SD card...
Now it does not reboot anymore and does not show the BMM boot animation!
It shows the regular, red Motorola logo, and then nothing.. black..
What did I do wrong, or what can I do to revive it??? Is there any windows one click installer/tool/recovery program??
I have been using BMM for a while now and this never happened... I installed many roms but now it seems as if it is broken.
I would be so happy to get some hints. I haven't found some similar posts for this problem.
ejay
ejaybass said:
Hi everyone,
I am writing in order to find a helping hint to rescue my Motorola Razr XT910...
I was just trying to install another ROM via BMM, wiped everything, tried to reboot to BMM again because I inserted a SD card...
Now it does not reboot anymore and does not show the BMM boot animation!
It shows the regular, red Motorola logo, and then nothing.. black..
What did I do wrong, or what can I do to revive it??? Is there any windows one click installer/tool/recovery program??
I have been using BMM for a while now and this never happened... I installed many roms but now it seems as if it is broken.
I would be so happy to get some hints. I haven't found some similar posts for this problem.
ejay
Click to expand...
Click to collapse
there isn't a script tool for the xt910 because there are too many firmwares. The motorola logo means your bootloader is there, the black screen after means there isn't a ROM for it to boot up. It is curious that BMM hijack isn't showing up though. Have you taken the sd card out and tried booting it up again?
Anyways make sure you can get into stock recovery, if so, find the correct firmware for your xt910 (it is region specific.)
reinstall it with RSD lite(make sure you have plenty of battery.) Reroot, Reinstall BMM and restore your backup.
Draxin said:
there isn't a script tool for the xt910 because there are too many firmwares. The motorola logo means your bootloader is there, the black screen after means there isn't a ROM for it to boot up. It is curious that BMM hijack isn't showing up though. Have you taken the sd card out and tried booting it up again?
Anyways make sure you can get into stock recovery, if so, find the correct firmware for your xt910 (it is region specific.)
reinstall it with RSD lite(make sure you have plenty of battery.) Reroot, Reinstall BMM and restore your backup.
Click to expand...
Click to collapse
Thanks for your quick reply!
Right now I cannot get into ANY menu or something, I can press any button I want. After the "logo" it stays black. The phone also might not even be able to be connected to my computer. At least Microsoft Windows doesn't even show a new device when I connect it via USB, regardless if I have the correct drivers...
I dont know what to do... RSD didnt help me either. It wont find the phone...
ejaybass said:
Thanks for your quick reply!
Right now I cannot get into ANY menu or something, I can press any button I want. After the "logo" it stays black. The phone also might not even be able to be connected to my computer. At least Microsoft Windows doesn't even show a new device when I connect it via USB, regardless if I have the correct drivers...
I dont know what to do... RSD didnt help me either. It wont find the phone...
Click to expand...
Click to collapse
What logo?There is no logo in recovery...
Press vol-,vol+ and power button at the same time to get into recovery,select the option AP Fastboot and then you connect it via usb.
Sent from my Razr XT910
welder73 said:
What logo?There is no logo in recovery...
Press vol-,vol+ and power button at the same time to get into recovery,select the option AP Fastboot and then you connect it via usb.
Sent from my Razr XT910
Click to expand...
Click to collapse
Well, whenever you turn on your Razr, there is an initial red Motorola Logo. After that you usually touch the screen to boot into BMM (in case the green boot loader appears).
BUT... (of course I tried the VOL+ Vol- und Power button move) after rebooting it only shows the red Motorola Logo and then nothing but black.
ejaybass said:
Well, whenever you turn on your Razr, there is an initial red Motorola Logo. After that you usually touch the screen to boot into BMM (in case the green boot loader appears).
BUT... (of course I tried the VOL+ Vol- und Power button move) after rebooting it only shows the red Motorola Logo and then nothing but black.
Click to expand...
Click to collapse
I know there is a logo when you turn on the phone normally but you should turn it off and then turn it on with those three buttons,it must boot into recovery...
Sent from my Razr XT910
welder73 said:
I know there is a logo when you turn on the phone normally but you should turn it off and then turn it on with those three buttons,it must boot into recovery...
Sent from my Razr XT910
Click to expand...
Click to collapse
I have been trying this with these three buttons million times now. Until so far it always worked.. but now nothing happens anymore...
ejaybass said:
I have been trying this with these three buttons million times now. Until so far it always worked.. but now nothing happens anymore...
Click to expand...
Click to collapse
How long are you holding them down.. it can take a good twenty-thirty seconds sometimes. Mine is also finicky if I don't press them all down at the exact same time, it wont let me in then either.
If your getting the boot logo it is just really hard to believe you dont have stock recovery... can the device charge? If you hook it to a computer do you get the white led?
While it is Flashing M LOGO.... just keep the VOLUME DOWN AND POWER KEY Pressed...till it Flashes and Shutsdown....and immediately let go the Buttons and Immediately Again press Both the buttons... VOL DOWN+POWER Key
when you get to the FASTBOOT mode
you can follow this video
https://www.youtube.com/watch?v=LA8og7sbtBY
To unbrick your phone...Don't worry... its not broke
hrishi21007 said:
While it is Flashing M LOGO.... just keep the VOLUME DOWN AND POWER KEY Pressed...till it Flashes and Shutsdown....and immediately let go the Buttons and Immediately Again press Both the buttons... VOL DOWN+POWER Key
when you get to the FASTBOOT mode
you can follow this video
To unbrick your phone...Don't worry... its not broke
Click to expand...
Click to collapse
Thanks a lot for your reply! This video gave me hope I will try this as soon as I can...
ejaybass said:
Thanks a lot for your reply! This video gave me hope I will try this as soon as I can...
Click to expand...
Click to collapse
Now I am facing an issue that's really annoying. I can get into recovery (AP Fastboot) if the phone is connected to a power source. As soon as I unplug it, the screen turns black! When I connect the phone to my computer, the LED goes white and I cannot access AP Fastboot....
When no cable is connected to the phone I cannot access any recovery mode.
What is wrong here? Even if I connect the phone to the power source only, it shows the red Motorola logo all the time. It seems as if I cannot turn it off. Is there also a trick how to really turn it off and let the phone charge??
As the title says:
My phone: Motorola Razr Maxx / xt910
I have used 3.65 but i decided to update to 3.73 along since i hopped to CM11 M9 from CM11 M7
This is where my problems started.
I made a new partition, and activated it as "active" one.
I installed CM11 M9 onto it, and google apps after that.
I booted to the new system and setup my apps and everything was fine, then i shut down the phone.
After i re-started the phone today it was stuck on motorola dual core technology logo. (which happens before safestrap).
And i managed to get into bootloader and deleted the CM11 M9 partition and switched back to stock rom as active one.
Then i attempted to re-create the partition and when it was doing the partition, the phone went off (still had 96% battery left).
After starting the phone up again, it's stuck on infinite boot loop, and flashes the green safestrap BIOS for half a second.
Is there any way i can fix my phone?
Try to flash it with RSD Lite, but its loss of data :/
Thank you for answering
archie1988 said:
Try to flash it with RSD Lite, but its loss of data :/
Click to expand...
Click to collapse
That is least of my worries And i got all data backed up pretty well
Is there any step by step tutorial for this?
stefeman said:
Thank you for answering
That is least of my worries And i got all data backed up pretty well
Is there any step by step tutorial for this?
Click to expand...
Click to collapse
Go here: http://forum.xda-developers.com/showthread.php?t=2155576
And scroll to video named undbrick/restore/unroot via rsd lite.
On the first page [emoji6]
archie1988 said:
Go here: http://forum.xda-developers.com/showthread.php?t=2155576
And scroll to video named undbrick/restore/unroot via rsd lite.
On the first page [emoji6]
Click to expand...
Click to collapse
I can't even get to AP Fastboot.. the safestrap flashes upper area and ****s up before that
Enough with this ****.. I'll bring this **** to my ISP and pay something so they null it and re-install stock system..
Lesson of the day.. don't update safestrap lol
stefeman said:
I can't even get to AP Fastboot.. the safestrap flashes upper area and ****s up before that
Click to expand...
Click to collapse
Turn off the phone and while it's off press vol- vol+ and the power button at the same time.
If you do it right,you shouldn't see anything related to SS.
Sent from my Razr XT910
welder73 said:
Turn off the phone and while it's off press vol- vol+ and the power button at the same time.
If you do it right,you shouldn't see anything related to SS.
Sent from my Razr XT910
Click to expand...
Click to collapse
Done that multiple times and the screen just flashes on upper area of the screen and goes off..
I can't even power it on without plugging in a charger first.. If i unplug charger it flashes and goes off..
The battery is close to 96-98%
stefeman said:
Done that multiple times and the screen just flashes on upper area of the screen and goes off..
I can't even power it on without plugging in a charger first.. If i unplug charger it flashes and goes off..
The battery is close to 96-98%
Click to expand...
Click to collapse
What about the led light,is it white?
If it's white then your battery is too low,you must buy or make the factory cable to be able to flash the fastboot with Rsd lite.
Sent from my Razr XT910
welder73 said:
What about the led light,is it white?
If it's white then your battery is too low,you must buy or make the factory cable to be able to flash the fastboot with Rsd lite.
Sent from my Razr XT910
Click to expand...
Click to collapse
Led light is never shown.. =/
Hello.. I'm new to RAZR
I was on stock 4.1.2 and I tried to download and install latest nightly cm12
I read from the wiki that i should install cm12 in safestrap http://wiki.cyanogenmod.org/w/Spyder_Info
I went to the download page of safestrap, but i downloaded the wrong version for my device.
I should've download Safestrap-umts_spyder-v3.75.apk but i downloaded Safestrap-spyder-v3.75.apk instead.
safestrap installed fine. But the rom installation failed and after reboot, I can't get back into safestrap by pressing menu while M logo..
I can't get into fastboot by pressing volume down and power either
Any solution? Thanks in advance
cahsobo said:
Hello.. I'm new to RAZR
I was on stock 4.1.2 and I tried to download and install latest nightly cm12
I read from the wiki that i should install cm12 in safestrap http://wiki.cyanogenmod.org/w/Spyder_Info
I went to the download page of safestrap, but i downloaded the wrong version for my device.
I should've download Safestrap-umts_spyder-v3.75.apk but i downloaded Safestrap-spyder-v3.75.apk instead.
safestrap installed fine. But the rom installation failed and after reboot, I can't get back into safestrap by pressing menu while M logo..
I can't get into fastboot by pressing volume down and power either
Any solution? Thanks in advance
Click to expand...
Click to collapse
When you see the M logo,press and hold power button untill you see a quick flash,like crt effect ( in that way you are sure that the phone is off) and immediately press vol+,vol- and power button at the same time.
Sent from my Razr XT910
welder73 said:
When you see the M logo,press and hold power button untill you see a quick flash,like crt effect ( in that way you are sure that the phone is off) and immediately press vol+,vol- and power button at the same time.
Sent from my Razr XT910
Click to expand...
Click to collapse
Thank you. I can finally access the AP Fastboot mode and flash my phone with RDS lite...