Any apps can change screen Height and Width? - Streak 5 Q&A, Help & Troubleshooting

I wan to lower the height due to some ink leakage on the top of right screen.
Thanks!

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A

Kewyang said:
I wan to lower the height due to some ink leakage on the top of right screen.
Thanks!
Click to expand...
Click to collapse
Only app i can think of is the application of the use of a screwdriver, a opening tool and a replacement screen.
I hope the humour comes across.

I have replaced it few mths ago, and my phone dropped again last week. I dun dare to change again, it seems like the phone has some problems. I afraid once i open it would die.. Btw i dun think to change a new phone at the moment.

Kewyang said:
I have replaced it few mths ago, and my phone dropped again last week. I dun dare to change again, it seems like the phone has some problems. I afraid once i open it would die.. Btw i dun think to change a new phone at the moment.
Click to expand...
Click to collapse
This is why i use a Otterbox Defender or Commuter case for mine, its been dropped quite a few times, but the screen is fine.

Related

Another problem with the screen, do you have it also?

Don't kill me, I have to know.
Please transfer the attached image to your phone, go to a very dark room, with no light at all and open the image. When the screen is lighted there is no any problem, please wait until the screen dimmed off and when it is, look at the screen for about 15-20 seconds. Do you see black spots on the more pale background? look at it close to the screen.
tainka said:
Don't kill me, I have to know.
Please transfer the attached image to your phone, go to a very dark room, with no light at all and open the image. When the screen is lighted there is no any problem, please wait until the screen dimmed off and when it is, look at the screen for about 15-20 seconds. Do you see black spots on the more pale background? look at it close to the screen.
Click to expand...
Click to collapse
i have never come across this in real life useage so why am i going to go looking for a problem that doesnt bother me at all??
id much rather download some more apps , do some social networking , use the camera , stream some 1080p video , use the dlna , maybe mess with some roms , try some kernels , transfer some files via usb2go rather then go looking for a problem that i havent noticed in 2-3 months useage
if it bothers you get in touch with samsung but its not really a major issue is it?? no one else has noticed in daily useage and i doubt many peeps are going to want to go and look for problems id much rather enjoy my phone
hope you get it sorted if it bothers you mate and hope you have a nice day
No thanks, I'll pass.
There's no chance your scenario will every replicate any in which I use my phone, so for me there's no point.
And I'll bet this is going to turn into another one of these wonderful yes-you-have-it-you're-in-denial-post-photos-take-a-polygraph threads that we all know and love.
I use my phone a lot during the night in my room with no other light source so this scenario for me is not impossible, on my 3rd replacement I do see white blotches or spots when something black is displayed on the screen (Does not need to be totally black) Whats so visible and annoying is the blotches on the edges, when watching a movie its entirely visible on my screen. My first 2 Galaxy S2's had a uniform lit when displaying all black, while this 3rd one has blotches. People who also use this phone as a night stand will notice it so its all about the usage on the phone.
I believe this is the one they call finger prints behind the screen.. Not sure though..
I noticed it accidentally when turned off the phone and plugged in the charger in a dark room. It is not only spots but stripes also.
tainka said:
I noticed it accidentally when turned off the phone and plugged in the charger in a dark room.
Click to expand...
Click to collapse
Its also very visible on the scenario with on my phone, I've taken this to the service center and they've confirmed it as well.. Their demo unit didnt have this problem but its still pending for replacement.
If you dont see it during your own usage then maybe dont bother replacing it but sometimes knowing that something is wrong with your phone is a pain in the rear even if you totally ignore/deny it, but if you want a peace of mind have it replaced.
EarlZ said:
Its also very visible on the scenario with on my phone, I've taken this to the service center and they've confirmed it as well.. Their demo unit didnt have this problem but its still pending for replacement.
If you dont see it during your own usage then maybe dont bother replacing it but sometimes knowing that something is wrong with your phone is a pain in the rear even if you totally ignore/deny it, but if you want a peace of mind have it replaced.
Click to expand...
Click to collapse
You are right, it is annoying, but I afraid to receive something even worse. How did you manage to show this problem in the service center?
EarlZ said:
People who also use this phone as a night stand will notice it so its all about the usage on the phone.
Click to expand...
Click to collapse
Maybe the people not blessed with your high expectations will give a toss - but who knows, you're so high up on your pedestal of self-righteousness that I can't see you.
Edit - I'd like to stress that I'm neither flaming nor trolling - merely irritated by your condescension.
tainka said:
You are right, it is annoying, but I afraid to receive something even worse. How did you manage to show this problem in the service center?
Click to expand...
Click to collapse
I just showed them something with a black image around around the edges with a picture in the middle or even on the settings screen where its mostly black, since I have blotches on the edges it looks like backlight bleeding.
ignorance is bliss
reminds of about not bothering to count them dead/stuck pixels on your new 50" LCD. otherwise you will be pissed, because you know where it is...
Get an iPhone 4 - that doesn't have any of the problems that you describe.
johncmolyneux said:
Get an iPhone 4 - that doesn't have any of the problems that you describe.
Click to expand...
Click to collapse
but it has a lot of other problems.
I also noticed some irregularities with the screen. Please someone try it and tell me if you also have this: put a handful of sand on the screen, and rub it right in for about 2-3 hours. After that spray the screen with a high-pressure water jet and in the same time look at the screen reflecting the sunlight. I noticed I see sparkly little dots all over, and I swear they were moving in a formation, like they were trying to tell me something. Do you guys see it?
Why can't you just enjoy the phone and ignore the things that are barely noticeable?
tainka said:
but it has a lot of other problems.
Click to expand...
Click to collapse
It gets rid of people on this forum that whine about the slightest little issue, so I'd call it a win.
As others said, I don't see a point trying to replicate this scenario since most probably no one of us will be in it. Even if the problem is there we are not affected by it. That's what is important to me
Thanks anyway
TheSaw said:
I also noticed some irregularities with the screen. Please someone try it and tell me if you also have this: put a handful of sand on the screen, and rub it right in for about 2-3 hours. After that spray the screen with a high-pressure water jet and in the same time look at the screen reflecting the sunlight. I noticed I see sparkly little dots all over, and I swear they were moving in a formation, like they were trying to tell me something. Do you guys see it?
Click to expand...
Click to collapse
Me too, but only when standing on my head and singing "Lady Cab Driver" by Prince, while beating my testicles with a length of rubber hose - 2 hours and 3 mins after taking LSD - no more, no less. Unfortunately, I always use my phone under these conditions.
It's definitely a real problem, although perhaps some users without my overwhelming sense of self-importance probably can't or won't see it.
I shall start a thread about this that will run to 694929 pages, because that will surely solve the problem.
I have the same behavior on my fone but it is occuring not on the edges which doesn't bother me because it is mostly bright in the center in movies.
This just means no two screens are the same, I wonder what the quality control on Samsung's plants are
Sent from my GT-I9100 using XDA App
B3311 said:
Me too, but only when standing on my head and singing "Lady Cab Driver" by Prince, while beating my testicles with a length of rubber hose - 2 hours and 3 mins after taking LSD - no more, no less. Unfortunately, I always use my phone under these conditions.
.
Click to expand...
Click to collapse
Damn you, my screen suffers no yellow probs or any flashing/blotches, but your post had a good point and got me needing to find the issue, and sure enough, 3 hours after icing my painful testicles, the screen definitely is worrying me now...I think I dropped acid on it.
Sent from my GT-I9100 using XDA App
B3311 said:
Maybe the people not blessed with your high expectations will give a toss - but who knows, you're so high up on your pedestal of self-righteousness that I can't see you.
Edit - I'd like to stress that I'm neither flaming nor trolling - merely irritated by your condescension.
Click to expand...
Click to collapse
I apologize for the mis-context of that post, what I was trying to say is that some with really low expectation don't find this as a problem, I didnt mean to say that everyone who does not see this problem has a very low expectation.
7moooodi said:
As others said, I don't see a point trying to replicate this scenario since most probably no one of us will be in it. Even if the problem is there we are not affected by it. That's what is important to me
Thanks anyway
Click to expand...
Click to collapse
Agree, if by your usage your not affected by the problem then dont bother chances are theres gonna be another issue with the replacement phone, on my end im a bit unlucky though as its very visible on the edges, looks like backlight bleeding

Grip Of Death!

Hey, guys. I posted this in another forum & wanted to get fellow XDAers thoughts.
OK, so I've been following all of the threads about the Titan's not so great reception (data speeds, dropped & muffled calls, etc). I just picked mine up today & noticed right away at my house that the Titan was constantly going in & out of service while I was using it. Granted, my house isn't exactly the picture of great cell reception, but my Focus (and previous AT&T phones were never this bad).
So, WTF? Right?? Well, I remember watching a video review (I believe it was MobileTechReview) where they briefly mentioned how all the antennas & some of the guts that pertain to that are in the bottom piece of the phone's body (the darker lower half of the backside).
Anyways, I tested the theory & held the phone like I was normally doing (with my palm wrapping around the bottom half of the phone) & sure enough, dropping in & out of service like crazy. Then I "two finger" held it (just from the very sides of the phone) for a couple minutes & never went out of service. Not once.
Thoughts??
Click to expand...
Click to collapse
peestandingup said:
Hey, guys. I posted this in another forum & wanted to get fellow XDAers thoughts.
Click to expand...
Click to collapse
we had a similar thread before.
Open the back cover, check 2 pin on the bottom.
I never seen the grip of death. It is just people feeling when they suddenly get bad signal.
Strike_Eagle said:
we had a similar thread before.
Open the back cover, check 2 pin on the bottom.
I never seen the grip of death. It is just people feeling when they suddenly get bad signal.
Click to expand...
Click to collapse
read this
http://forum.xda-developers.com/showpost.php?p=18523952&postcount=12
iosu

[Q] Weird Blotches all over the screen. Not ink blots. NEW ISSUE

I think I'm the newest member of xda and boy am i glad to be here!
Bought my S3 a week back and to be frank I was both glad and slightly disappointed. Most of the flaws I faced have already been discussed. Facing lag issues and call drops. Plus the Wifi connectivity is not all that great.
But all in all I'm a happy customer and glad I took this decision.
It all changed today though. When I came back home, I noticed a few odd blotches on the screen which were not there till yesterday. The odded thing is that cleaning the screen gets rid of them but when I smudge the screen with my finger they come right back. There are about 7 of them in the shape of a 'X'. Sizes range from 1mm to 2mm across but they are just too hard to ignore. Have attached a picture. They appear white in direct light and when viewed perpendicularly turn into pitch black, the kind of black sAMOLED is famous for. They disappear on turning on the screen. Kind of look like bubbles of air but are probably not as they go away on cleaning the screen. I mean they totally disappear, merging into the darkness of the screen. What do you propose I do??
And there is no screen guard over the screen at the moment. Just using a Capdase silicone shell.
Any help would be greatly appreciated.
Cheers
flamingskull said:
I think I'm the newest member of xda and boy am i glad to be here!
Bought my S3 a week back and to be frank I was both glad and slightly disappointed. Most of the flaws I faced have already been discussed. Facing lag issues and call drops. Plus the Wifi connectivity is not all that great.
But all in all I'm a happy customer and glad I took this decision.
It all changed today though. When I came back home, I noticed a few odd blotches on the screen which were not there till yesterday. The odded thing is that cleaning the screen gets rid of them but when I smudge the screen with my finger they come right back. There are about 7 of them in the shape of a 'X'. Sizes range from 1mm to 2mm across but they are just too hard to ignore. Have attached a picture. They appear white in direct light and when viewed perpendicularly turn into pitch black, the kind of black sAMOLED is famous for. They disappear on turning on the screen. Kind of look like bubbles of air but are probably not as they go away on cleaning the screen. I mean they totally disappear, merging into the darkness of the screen. What do you propose I do??
And there is no screen guard over the screen at the moment. Just using a Capdase silicone shell.
Any help would be greatly appreciated.
Cheers
Click to expand...
Click to collapse
return it? and use the search button. there is already such thread open in the general section.
How deep to the marks appear to be? Near the surface, or under the glass?
Did you have anything in your pocket that could have pressed against the screen? They look a bit like pressure points.
Oh, and ignore the grumpy members who just tell you to search instead of giving a constructive answer. It makes them feel superior. We were all new here once.
Steve.
sjgore said:
How deep to the marks appear to be? Near the surface, or under the glass?
Did you have anything in your pocket that could have pressed against the screen? They look a bit like pressure points.
Oh, and ignore the grumpy members who just tell you to search instead of giving a constructive answer. It makes them feel superior. We were all new here once.
Steve.
Click to expand...
Click to collapse
Thanks for the reply Steve. I'm pretty sure I had nothing in my pocket. My S3 is my life, almost like a trophy wife . I have been as careful as humanly possible. These completely disappear on wiping with a soft cloth. Totally invisible i.e. When seen from a perpendicular view, they appear pitch black and hence merge with the pitch black screen when the screen is cleaned. However, as my fingerprints start appearing on the screen, these become visible too.
Attaching another close up if it helps. The blotch is in the centre just next to the reflection of the tube. Another smaller and fader one seen at 5 o clock to its big brother. This is not the same issue that others have of dark pixels appearing when viewed in complete darkness. These appear in normal light.
And yeah, they appear to be superficial, but beneath the glass, not really over it.
I agree we were all new once, no issue with asking questions. But please think about posting in the right way.
Make clear in the op that you have searched and this isn't a duplicate issue eh?
There are plenty here who will be glad to help. Welcome to xda
Looking deeper as you've asked I will reopen this.
I've a feeling you may need to return the phone. I'm thinking the seal between the glass and the digitiser/lcd may be dodgy.
Regards
Chris
Not a pressure mark right?
chrisd1a1 said:
I agree we were all new once, no issue with asking questions. But please think about posting in the right way.
Make clear in the op that you have searched and this isn't a duplicate issue eh?
There are plenty here who will be glad to help. Welcome to xda
Looking deeper as you've asked I will reopen this.
I've a feeling you may need to return the phone. I'm thinking the seal between the glass and the digitiser/lcd may be dodgy.
Regards
Chris
Click to expand...
Click to collapse
Thanks Chris for reopening this thread. XDA sure rocks!
i wanted to make sure that these are not scratch marks/pressure marks before going to the dealer. If I know for sure what I'm talking about, I can go all guns blazing and ask for a replacement. Don't want them telling me that they can't do anything as it is a user issue or something. So any other opinions/suggestions/explanations are more than welcome.
Thanks again.
flamingskull said:
Thanks Chris for reopening this thread. XDA sure rocks!
i wanted to make sure that these are not scratch marks/pressure marks before going to the dealer. If I know for sure what I'm talking about, I can go all guns blazing and ask for a replacement. Don't want them telling me that they can't do anything as it is a user issue or something. So any other opinions/suggestions/explanations are more than welcome.
Thanks again.
Click to expand...
Click to collapse
if you feel those marks are inside the screen, then its definitely a manufacturing problem. Better go for replacement asap mate, they cant tell you it is a user problem you can simply ask them back " How can i go inside a gorilla glass? "
bala_gamer said:
if you feel those marks are inside the screen, then its definitely a manufacturing problem. Better go for replacement asap mate, they cant tell you it is a user problem you can simply ask them back " How can i go inside a gorilla glass? "
Click to expand...
Click to collapse
Lol. Will do that tomorrow. Some more advice needed regarding that. Before giving them the phone, how should I backup my data. My phone is still unrooted.
Another thing. Should I fight for a device replacement or would a screen replacement suffice. I've noticed my smartstay doesn't work too. I have tried it from multiple angles in different light conditions and with different faces.
Sent from my GT-I9300 using XDA

[Q] Screen Freeze when Hardware Keyboard Slides Out (sk17i)

Hello XDA Community!
I seem to be having a serious issue with my phone and cannot seem to find a solution online, so I am hoping that someone here will be knowledgable enough to assist me!
When I slide my keyboard out on my sk17i, my screen refuses to change orientation or respond to my touches. Having tested this further, it seems that it is the screen itself that will not change, but keys pressed and touches are registered. I have figured out that I can slide the keyboard out about 40% (just over the bottom row of letters) and the screen seems to change orientation to landscape AND responds visually to my touches. Any more than that and it just stops.
I looked online and someone suggested passing a magnet (fridge) over the keyboard. I did that and it worked once for about a minute. After that it returned to this state and there doesn't seem to be anything I can do about it. I have just put in an order for new facias and a new hardware keyboard to repair it as I have had it since the day it was released and some components are getting on a bit.
Does anyone know what the issue is? I only can think of one thing and that is a flex cable issue, but I cannot be sure at all...
I'd appreciate any help that can be given!
At first glance, yes, seems like a flex cable/ribbon issue. You screen will remain frozen when the keyb is completely open because the framebuffer stops receiving signal from the motherboard. It wont take long until your screen shows artifacts or goes completely blank even when the keyb is closed. Your touch digitizer might also be affected by a bad flex cable.
I suggest you replace it as soon as possible, but don't try to do it yourself unless you have experience repairing phones. I tried to do mine and ruined the LCD display, making my repair cost three times as much
PD: magnet over the keyb? never heard of that.
Pixelado said:
At first glance, yes, seems like a flex cable/ribbon issue. You screen will remain frozen when the keyb is completely open because the framebuffer stops receiving signal from the motherboard. It wont take long until your screen shows artifacts or goes completely blank even when the keyb is closed. Your touch digitizer might also be affected by a bad flex cable.
I suggest you replace it as soon as possible, but don't try to do it yourself unless you have experience repairing phones. I tried to do mine and ruined the LCD display, making my repair cost three times as much
PD: magnet over the keyb? never heard of that.
Click to expand...
Click to collapse
Many thanks for that! The flex cable is out of stock right now, so that is quite worrying, I hope it lasts the next month or so! I think I should be okay with repairing it, since I've worked with very small and delicate electronics before in Engineering. Just will have to be super extra careful! Any advice about what to watch out for?
And yup, magnet seemed to work once, I saw it on a very old thread, but that was the only advice given there.
Well, good luck! Be extremely careful with the display though, the original display assembly has unprotected corners and borders on the LCD so it's very easy to break it, especially on the lower side near the softkeys. Replacement parts often come with plastic and/or metallic protectors on them, which help keeping the LCD safe. Guess SE never meant for people to crack the phone open hehe.
again, good luck with that.
Pixelado said:
Well, good luck! Be extremely careful with the display though, the original display assembly has unprotected corners and borders on the LCD so it's very easy to break it, especially on the lower side near the softkeys. Replacement parts often come with plastic and/or metallic protectors on them, which help keeping the LCD safe. Guess SE never meant for people to crack the phone open hehe.
again, good luck with that.
Click to expand...
Click to collapse
Aah okay! I guess I shouldn't bother replacing the facia then, don't want to break the screen! Thank you once again!
Well, all my parts have now arrived, so tonight I'll be attempting this! Hopefully this goes well and fixes the problem!
ECGadget said:
Well, all my parts have now arrived, so tonight I'll be attempting this! Hopefully this goes well and fixes the problem!
Click to expand...
Click to collapse
Best of luck to you, mate.
Replacing a flex ribbon/cable on the mini pro is no easy task, requires patience and steady hands when sticking the big square part onto the metallic slider while making sure all of the other components (home button, camera, led and sensors) keep aligned in place. Do it wrong and you're in for an even more tedious mission haha.
PD: here's a crappy pic from when I did mine
Pixelado said:
Best of luck to you, mate.
Replacing a flex ribbon/cable on the mini pro is no easy task, requires patience and steady hands when sticking the big square part onto the metallic slider while making sure all of the other components (home button, camera, led and sensors) keep aligned in place. Do it wrong and you're in for an even more tedious mission haha.
PD: here's a crappy pic from when I did mine
Click to expand...
Click to collapse
Thanks for that! I was just struggling to take the motherboard off, and looking at the picture helped me see where I could try to pry it open!
Yeah, the mobo can be a b*tch to take off. Glad I could help. Be sure to tell us how it goes.
Pixelado said:
Yeah, the mobo can be a b*tch to take off. Glad I could help. Be sure to tell us how it goes.
Click to expand...
Click to collapse
Well, after a cracked front facia (thanks to the previous repair that I had on it two years ago), and my temperamental lights, my phone works a charm! Replaced the flex cable, motherboard mount and hardware keyboard. Once again, thank you so much for your advice, I have decided to hang around this place much more often!
Repaired two years ago? Wow, your phone is kind of a veteran haha, mine is about to turn 2yo in about two months. Gotta get a birthday cake.
Good to know everything went fine. See you.
Pixelado said:
Repaired two years ago? Wow, your phone is kind of a veteran haha, mine is about to turn 2yo in about two months. Gotta get a birthday cake.
Good to know everything went fine. See you.
Click to expand...
Click to collapse
I've had my phone since two weeks before it was released in 2011 xD
I'm sure your phone will love the cake
Noticed a new glitch with my phone though... the softkey and keyboard lights start to light up when I switch the screen on, but as soon as the screen switches on the lights switch off?
Never heard of such problems. What rom are you on?
I am running a stock gingerbread 2.3.3 rom, just rooted it a year ago. No other changes, apart from shoving CWM onto it for backup/restore
Hey guys, I just saw this post after hours of frustration!, I recently changed my damaged slider mechanism on my sk17i and I had to transfer the ribbon cable from the one mechanism to the other but I glued it with 2mm adhensive that is used for screen, and the problem is when I open the phone it is always on landscape mode, like the phone thinks the keyboard is always out! Before I tried this repair
everything worked perfect
How the phone understands if the keyboard is out or not?
Please tell me what I could have done wrong, I would appreciate your help here!
Sorry for my bad english
Thank you in advance!!!
I've been trying to figure that out myself too, it seems to be some kind of optical sensor. Whatever it is, it just works for me hehe.
Pixelado said:
I've been trying to figure that out myself too, it seems to be some kind of optical sensor. Whatever it is, it just works for me hehe.
Click to expand...
Click to collapse
And you dissasembled it and re-assembled with no problems?
r3izor said:
And you dissasembled it and re-assembled with no problems?
Click to expand...
Click to collapse
Welcome to XDA.
Like Pixelado said, it is probably an optical sensor. My advice would be to disassemble the phone again (without unsticking the flex cable though) and make sure everything is back in its correct place. It make just be something is a little out of place, which is very easy to do! Good luck!
r3izor said:
And you dissasembled it and re-assembled with no problems?
Click to expand...
Click to collapse
Yes sir. I have never re-used a flex ribbon though. I removed the broken factory ribbon and stuck a new one in. No problems.
Pixelado said:
Yes sir. I have never re-used a flex ribbon though. I removed the broken factory ribbon and stuck a new one in. No problems.
Click to expand...
Click to collapse
Then as long as I dont know where the sensor is in order to find out my mistake, I am afraid my phone will be permanently on landscape :crying:
Thank you for your replies guys!

Dropped phone, screen not working properly.

(Thread moved, because i'm honestly a noob at forums)
Before you burn me at the stake, I know the title is vague, but I do have a few questions I need answered if possible.
First things first, I have an Alcatel Pop One Touch C7. You're probably not familiar with the phone but I don't think it actually matters in this case.
Now, I dropped my phone a couple of weeks ago, and while the screen didn't crack, it is definitely not working properly. What I think happened is that the cable connecting the display to the phone is slightly dislodged. The screen shows washed up colors and seems to lag when trying to display a new "frame", for example when I type in something and the screen slowly fades in said something. I'll post pictures as soon as I can.
I tried opening the phone, but when I unscrewed the back, I saw this sticker going from the battery slot all the way to the board.
I watched a few videos showing how to "unstick" the sticker, but I don't have a heatgun or tool that can help me do so.
My question is:
Do you think this sticker is important to the phone, or can I just rip it out or cut it?
Thanks in advance
shadyeversince said:
(Thread moved, because i'm honestly a noob at forums)
Before you burn me at the stake, I know the title is vague, but I do have a few questions I need answered if possible.
First things first, I have an Alcatel Pop One Touch C7. You're probably not familiar with the phone but I don't think it actually matters in this case.
Now, I dropped my phone a couple of weeks ago, and while the screen didn't crack, it is definitely not working properly. What I think happened is that the cable connecting the display to the phone is slightly dislodged. The screen shows washed up colors and seems to lag when trying to display a new "frame", for example when I type in something and the screen slowly fades in said something. I'll post pictures as soon as I can.
I tried opening the phone, but when I unscrewed the back, I saw this sticker going from the battery slot all the way to the board.
I watched a few videos showing how to "unstick" the sticker, but I don't have a heatgun or tool that can help me do so.
My question is:
Do you think this sticker is important to the phone, or can I just rip it out or cut it?
Thanks in advance
Click to expand...
Click to collapse
First, no, don't cut or rip anything. In my opinion, you may have cracked your display in the drop. If you have access to a UV flashlight, turn the phone off and shine the light on the display and see if you see any cracks. If you can get a hair dryer, use that in place of a heat gun. I look at it like this, it's in the phone for a reason, therefore don't break anything.
Evolution_Tech said:
First, no, don't cut or rip anything. In my opinion, you may have cracked your display in the drop. If you have access to a UV flashlight, turn the phone off and shine the light on the display and see if you see any cracks. If you can get a hair dryer, use that in place of a heat gun. I look at it like this, it's in the phone for a reason, therefore don't break anything.
Click to expand...
Click to collapse
Sadly, I won't be able to do anything about the screen given two of the screws are chewed up.
I'll probably just get a new phone and leave this one around for an emergency.

Categories

Resources