Hi Guys,
Random problem I have been having for a couple of weeks, after first turning on my tablet the screen will go black, the screen is still on but the backlight is out.
To get it back I press the power button twice but it gets annoying.
Anyone had this?
Cheers
Chris
Try 97% or 98% or 99% brightness not 100%.
Let us know if it works.
Related
I've noticed lately that after I end a call or lock my phone and then go to use it again the screen will stay black, HOWEVER I can see the lights between the hard keys light up and the actual screen LCD come on but stay black.
Has anyone else experienced this? Sometimes it will come back by itself and other times I will have to take the battery out to restart it
yes and quite offen actually, it happend on the first day i got the phone.
Happens to me if the up time is 30+ hours. Usually I just press the home key and it comes back around.
Sent from my X10i using XDA App
Details of my panic situation below.
The phone is still awake and I can feel haptic feedback and hear sounds, but the screen is just blank. Did a number of battery pull but still nothing. Finally after awhile of battery pulling and letting it sit for a few seconds off, I powered on the device and I could see some sort of grey tint on the screen where I was met with a very vague but still visible boot animations. After about 3 seconds, it improves and I pushed slightly on the screen and noticed it helped, so I pushed on it further to help it out and it just turned back to normal everything turned out fine. What could be the problem with it?
what could be the problem? I never dropped it or anything so any suggestions as to why this happened and if it'll happen again?
Hi there
I have used this tablet without bigger problems for months. a few days ago I've turned it on and after a few minutes using it the device froze completely. then the screen turned black after a few seconds, power led off. I've tried to reset it by pressing power button long and nothing happens, display black, led off.
Everytime I plug it in, the power led turns on, but nothing else happens.
Today I've opened the device and found out the batteries are at 2.8V. I've then charged them with my Lipo charger (had to desolder it, charge and then resolder). Still nothing works. And if there's no battery connected the exact same happens like with the batteries in place: nothing exept green led turns on.
So, why did this happen and how can it be fixed?
Thanks
same thing happened
hi,
exactly the same thing happened to me. Did you manage to solve the problem?
I also tried to empty the batteries and then to re-start, no success. The LED will light for a couple of minutes then turns off, but nothing else happens afterwards, the screen remains black all the time.
Resetting the device also doesn't work, the screen won't turn on, not even in the recovery mode.
I would appreciate any help on this issue.
ori
still dead
Nope, unfortunately I could never fix it so it's just laying around collecting dust as a expensive paperweight...
This problem started happening two weeks ago and it's quite annoying. Running Android 5.11 Archidroid with the latest Archikernel version on my phone.
The problem is that my Galaxy S3 seems to freeze when the screen turns off. If the screen is turned off for maybe half an hour or more, pressing the power button will not wake the device. In an attempt to figure out if it's a broken power button, I set the home and volume buttons in the settings menu as keys that will turn on the screen, but that doesn't work either. The only way to fix the issue is to hold the power button to restart the device and doing that every couple of hours gets really annoying. Trying to turn on the screen literally does nothing, as if the phone is turned off.
When the phone is not charging, the interval between the freezes seems to be much longer. The phone will work perfectly for a couple of hours without the above mentioned problem but when on a charger it quickly screws up.
Now, I don't believe my device turns off during this "process". I've turned on the LED for charging and whenever I'd get the screen freezing problem I'd unplug the charger and the LED wouldn't go away, it'd still light up as if the phone is connected to the charger, which it isn't.
Anyone have any idea on what the problem is? I've never experienced this before and it started happening all of a sudden.
How low is the kernel clockspeed running in sleep mode?. Should be at 200mhz at the very minimum!.
Beamed in by telepathy.
If this does not happen on a stock ROM, it would be a problem with the ROM and the phone.
I have been using my Amazfit Stratos for more than 2 years without any problem. Just recently (days ago) I woke up and checked my watch (wearing it while sleeping)... the display was blank.. when I try to turn it on or press a button.. it lights but with blank/black display. I remember that the battery was not low before I slept that night.
there was no wall that I could possibly hit while I sleep and I did not have any issues or problems on the watch before I slept that night.
Heart rate is not reading, as if its dead.. except that whenever I press a button (long press) it tries to light up with blank display.. then turn off again. It does not restart or shutdown when I long press the turn on/off button.
I tried to reset/hard reset the watch but I can't the screen is always blank (but it lit/light).
What I am planning to do now is try to have it drain, and charge it then turn if ON after.. thinking that my watch needs a reboot since it was a long time since its last reboot.
Anyone experience the same thing? Did you able to fix the issue? How?
If not, then I have to buy the newer model then
Thanks!
Hey, I had the same issue except, it happened when I exited ultra mode. Have you found any way to fix it? Did waiting for it to die then charging it and turning it on work?
Yeah, I did wait till my battery comes empty.. then I recharged it. It started like normal again.
It seems it got stucked or hanged and the buttons are not responsive with no display. I am using it now like nothing happens.
ejsalipahmad said:
Yeah, I did wait till my battery comes empty.. then I recharged it. It started like normal again.
It seems it got stucked or hanged and the buttons are not responsive with no display. I am using it now like nothing happens.
Click to expand...
Click to collapse
yeah i was able to fix it with plugging it in then the screen started working. That's a really weird bug
ejsalipahmad said:
Yeah, I did wait till my battery comes empty.. then I recharged it. It started like normal again.
It seems it got stucked or hanged and the buttons are not responsive with no display. I am using it now like nothing happens.
Click to expand...
Click to collapse
How long you wait unting battery empty