Related
Hi all,
I opened my brand new SGS2, put in the battery and plugged in the charger to the phone and started charging. First i was confused (coming from a nokia) because there was no indication of charging.
The indication appeared some 10 minutes later in the form of a flashing battery icon that disappeared after some time.
Now it has been a couple of hours and the battery icon is gone and nothing happens when i press the power button - i.e my brand new Samsung Galaxy S2 is not even starting!!
Can anyone tell me what the problem is and how to fix it? Does it just need a good long charge? Frankly, im quite terrified after having sunk in a lot of money for this phone.
(i hope my phone (or battery) is not a lemon and i'm just being a mega-noob )
Please, please, please help!!!
Thanks in advance
There're surely something not working correctly.
Don't know if it's the phone itself, the battery or the charger.
Try removing the battery and putting it back again and check it is placed correctly as well as the cable, charger and wall plug.
Normally the big battery icon should appear few seconds after you plug the phone into the charger.
Sent from my SHW-M110S using Tapatalk
gabrielex said:
There're surely something not working correctly.
Don't know if it's the phone itself, the battery or the charger.
Try removing the battery and putting it back again and check it is placed correctly as well as the cable, charger and wall plug.
Normally the big battery icon should appear few seconds after you plug the phone into the charger.
Sent from my SHW-M110S using Tapatalk
Click to expand...
Click to collapse
removed the battery thrice and tried - nothing happened. Battery, charger and wall-plug - everything proper.
I did see the icon, but now its gone and the phone is not starting.
My only hope is to keep it on charge overnight and hope for a miracle by tomorrow :|
Guess will take the phone to the service center tomorrow. Nightmare this is
Thanks anyways, man
metalrake said:
Hi all,
I opened my brand new SGS2, put in the battery and plugged in the charger to the phone and started charging. First i was confused (coming from a nokia) because there was no indication of charging.
The indication appeared some 10 minutes later in the form of a flashing battery icon that disappeared after some time.
Now it has been a couple of hours and the battery icon is gone and nothing happens when i press the power button - i.e my brand new Samsung Galaxy S2 is not even starting!!
Can anyone tell me what the problem is and how to fix it? Does it just need a good long charge? Frankly, im quite terrified after having sunk in a lot of money for this phone.
(i hope my phone (or battery) is not a lemon and i'm just being a mega-noob )
Please, please, please help!!!
Thanks in advance
Click to expand...
Click to collapse
Carry it back where you bought it from, after all you just bought it
achillies400 said:
Carry it back where you bought it from, after all you just bought it
Click to expand...
Click to collapse
I know that is something stupid to say but have you tried charging another phone with the same charger, or check if you have power in your wall?
Sent from my GT-I9100 using xda premium
Just wondering. Did you long press the power button when trying to boot the phone? A quick tap on the power button won't boot it. You have to hold it for just a second or two to register.
donalgodon said:
Just wondering. Did you long press the power button when trying to boot the phone? A quick tap on the power button won't boot it. You have to hold it for just a second or two to register.
Click to expand...
Click to collapse
This. When I got mine I just gave the power button a quick press as this worked fine on my Nexus One, but the S2 seems to need a long press to boot.
may be a software probs !!! try flashing with anyother ROm !
To see the battery charging icon you should press home button on the bottom.
To power on you should press power button on the right for about 3 seconds.
Sent from my GT-I9100
Mine is a ***** to turn on with charger plugged in.
Try taking charger out. Then hold power till you see logo. Only a few seconds.
Sent from my GT-I9100 using XDA App
will have to do that only, i guess
Turn the phone off and remove the battery for about a minute and then try.
Hollow.Droid said:
This. When I got mine I just gave the power button a quick press as this worked fine on my Nexus One, but the S2 seems to need a long press to boot.
Click to expand...
Click to collapse
i did it for 3 seconds, then 5 seconds and 10 seconds too. Nothing. Yesterday it was showing the flashing battery icon for quite some time. I went to sleep thinking, finally it is charging but then when i woke up it is dead.
I read somewhere that the battery charging icon is actually discharging the phone?
Dont fiddle with it anymore. Just exchange it from where you bought it.
Yeah, with charger plugged mine usually decides it likes to stay asleep then powering up.
And w/o anything attached I usually have to "beg" (=hold power button) for like 10 to 15 seconds sometimes until I see the bootsplashlogo.
Nothing that's bothering me, one just have to know it takes a while.
HellcatDroid said:
Yeah, with charger plugged mine usually decides it likes to stay asleep then powering up.
And w/o anything attached I usually have to "beg" (=hold power button) for like 10 to 15 seconds sometimes until I see the bootsplashlogo.
Nothing that's bothering me, one just have to know it takes a while.
Click to expand...
Click to collapse
finally got it to start - don't know what all i did - i think removing the battery and putting it back on did it
thanks all you guys!
Hi Everyone,
About 20 mins ago, my Touchpad running CM7 Alpha 2 suddenley stopped responding (the touchscreen that is), so i held down the power button to turn it off.
However, it wont turn back on! I have tried Home + Power + Vol Up for more than 30 seconds about 3 times and nothing. I am charging atm and nothing on screen. I have also tried holding the power button for about 10 seconds. Nothing!
Any suggestions?
mouseym~
Home + Power button for around 20 seconds should bring it back to life.
Sent from my HP Touchpad using xda premium
gaz31 said:
Home + Power button for around 20 seconds should bring it back to life.
Sent from my HP Touchpad using xda premium
Click to expand...
Click to collapse
Hmm, that sort of worked, i got the glowing HP symbol and it turned off again, repeating does the same thing too!
Thanks,
mouseym~
mouseym said:
Hmm, that sort of worked, i got the glowing HP symbol and it turned off again, repeating does the same thing too!
Thanks,
mouseym~
Click to expand...
Click to collapse
Sounds like your moboot has some problems when you forced shutdown it, try go to the webos recovery statue (the statue when you install CM7 into your TP), connect TP to your PC and reinstall moboot, or the whole CM7 if that doesn't work.
Good luck
mouseym said:
Hi Everyone,
About 20 mins ago, my Touchpad running CM7 Alpha 2 suddenley stopped responding (the touchscreen that is), so i held down the power button to turn it off.
However, it wont turn back on! I have tried Home + Power + Vol Up for more than 30 seconds about 3 times and nothing. I am charging atm and nothing on screen. I have also tried holding the power button for about 10 seconds. Nothing!
Any suggestions?
mouseym~
Click to expand...
Click to collapse
Same problem! Did you find a solution yet? I'm trying to figure out how to follow tigerdavid's advice.
Ok follow-up on this - I can't even get the TP to be recognized by my computer. What now?
How long did you leave it plugged in i had to leave mine plugged in for a couple of hours into the wall outlet before it would show the batter charging icon then turned on shortly after that
Sent from my SGH-I997 using xda premium
hi，when your tp is in the off statue，try holding both the power and the volume up botton， and then you can see a usb icon on your screen, that is the webos recovery mode.
Sent from my LT15i using xda premium
---------- Post added at 10:02 PM ---------- Previous post was at 09:44 PM ----------
Mhaddy said:
Ok follow-up on this - I can't even get the TP to be recognized by my computer. What now?
Click to expand...
Click to collapse
When you are in the webos recovery statue, the one I said in the last post (there is a usb icon on the screen), you can connect it to the computer, and neglect windows' response as it cannot recognize it, because it is actually a false warning. Then try following the steps for installing CM7.
had the same problem yesterday. just held power+home til it said to release the buttons.(previously i released as soon as the hp globe came up and it turned back off) hope this helps
When all else fails try this:
Hold power, Volume Down, and Home until the HP logo appears. May take up to 30 seconds or longer. Release all three buttons and the Touchpad should then boot. Worked for me the one and only time I've had to use it.
I charged Touchpad's battery full and turned it off about a month ago. Now I tried to turn it back on, nothing happens.
I plugged in usb charger, button under display started blinking. After 10mins, tried to turn it on, display turned on and it said attach own charger to get best results... blaablaa.. and then turned back off
Now it has been on own charger over an hour, in the beginning button blinked again for a while. Now it's all black and nothing happens. Tried power, pwr+front btn, pwr+vol up, pwr+front btn+vol down. Nothing.
Maybe I just haven't given enough light treatment?? I'm getting worried..
edit: overnight at charger, no change... battery dead? This sucks.
veepee78 said:
I charged Touchpad's battery full and turned it off about a month ago. Now I tried to turn it back on, nothing happens.
I plugged in usb charger, button under display started blinking. After 10mins, tried to turn it on, display turned on and it said attach own charger to get best results... blaablaa.. and then turned back off
Now it has been on own charger over an hour, in the beginning button blinked again for a while. Now it's all black and nothing happens. Tried power, pwr+front btn, pwr+vol up, pwr+front btn+vol down. Nothing.
Maybe I just haven't given enough light treatment?? I'm getting worried..
edit: overnight at charger, no change... battery dead? This sucks.
Click to expand...
Click to collapse
Bummer. I don't think it's good to let a Li-Ion battery fully discharge. I've had bluetooth headsets and older spare laptop batteries die because they were sitting in a drawer for months. It sounds like this is what may have happened to your Touchpad. You should have left it plugged in somewhere!
UCLAKoolman said:
Bummer. I don't think it's good to let a Li-Ion battery fully discharge. I've had bluetooth headsets and older spare laptop batteries die because they were sitting in a drawer for months. It sounds like this is what may have happened to your Touchpad. You should have left it plugged in somewhere!
Click to expand...
Click to collapse
Yeah, that's what seems to have happened. I just dont digest the idea that it died in 3 to 4 weeks. In standby, yes, but in off state.. if this happened after months, but we are talking only few weeks.
Any idea where to get a spare battery? Ebay show zero results.
Swyped from sgs2
It isn't likely its the battery, probably some kind of internal failure, but even if the battery is stone cold dead you should still be able to plug it in and run it that way.
You can change another microusb cable to re-charge again, b'cas the original cable quality is not good. Led blinking shows that battery is in low capacity, TP will bootup after charging to minimum battery voltage.
HP Back in life..
Got it working...
I let it be a week without any trying. Then plugged it's own charger on and the home started blinking again and after a while battery image came up! So it was in some sort of hang situation and needed to drain the battery again.
I did that also first time but at that time it just stopped blinking home and did nothing after that.
Now few hours later it's turned on and charging, 45%..
veepee78 said:
Got it working...
I let it be a week without any trying. Then plugged it's own charger on and the home started blinking again and after a while battery image came up! So it was in some sort of hang situation and needed to drain the battery again.
I did that also first time but at that time it just stopped blinking home and did nothing after that.
Now few hours later it's turned on and charging, 45%..
Click to expand...
Click to collapse
Thanks for reporting back on your situation!
Need some advice please
Any Flyer member who can advice me please?
Buyed a WIFI Flyer 16Gb Gingerbread stock no rooted turned on and suddenly turned off and got stuck in black screen (with some light in the back) vol down + power, nothing.
battery has 100% charge, but red led turned on and off ocasionally.
Any advice how to revive it would be greatly apreciated!
Thanks in advance,
Soft reset - Hold down power button only. Keep holding until tablet resets. You should know when this happens. You can't bring it up in bootloader/recovery (down vol. + power), until it's first actually turned off.
Does your PC recognize a device being plugged in when you connect
Sent from my HTC Flyer P510e using xda premium
.
Thanks for your replies:
It didnt work pressing only vol dow for a while, or presing only power button, it never rests.
Just behind power button a green mini led is turned on now all the time, probs started when removed back to insert sd card.
Tooked off to make some tests but now still nothing...
If connecting to PC nothing happens...not detected...no asking for install drivers
Any other advice?
Thanks in advance!
orb3000 said:
Thanks for your replies:
It didnt work pressing only vol dow for a while, or presing only power button, it never rests... probs started when removed back to insert sd card.
If connecting to PC nothing happens...not detected...no asking for install drivers
Any other advice?
Thanks in advance!
Click to expand...
Click to collapse
Take off back cover... Remove SD card... Try to reset again, power btn only, hold down 20 to 30 secs., don't use volume btn.
Nothing happens
i would suggest trying to globatron's attention. if anyone on this board would know what to do it would likely be him
orb3000 said:
Nothing happens
Click to expand...
Click to collapse
I would agree with mcord11758... Still...
orb3000 said:
battery has 100% charge, but red led turned on and off occasionally.
Click to expand...
Click to collapse
A red led isn't going to show with a 100% power condition. Later you wrote...
orb3000 said:
It didn't work pressing only vol down for a while, or pressing only power button, it never rests. Just behind power button a green mini led is turned on now all the time...
Click to expand...
Click to collapse
(doesn't make sense to me) A green led can't show unless the tablet is plugged into a power source and the battery actually is 100%...
If yours is a stock unit with a stock rom (and isn't defective), I would suspect a low battery condition that can't reset/reboot for lack of power...
Suggest you plug it into the wall and try the reset procedure again, and if still a failure, (maybe you can get some help from globatron or) call HTC.
...and then again, as I've read in other threads (that you've also seen), maybe all that's needed is a battery disconnect & reconnect. - Hope you get those pics, and if so... make it a last course of action, as you'll have no warranty if you do it.
Thanks.
Update:
I left computer connected to Flyer all night, and the day after it was turned off, then unplugged from PC and plugged it again, PC recognized the tablet and after that I ran the stock RUU, now it´s stuck on the process as it has been more than 20 minutes and progress bar in computer is at 100% with the following legend:
sending..........
updating the Rom image on your android phone
It is stuck there, how much should I wait? or if you recommend to do something else?
Thanks in advance for all your help.
UPDATE: RUU failed, says I have the wrong image, finished, exited and rebooted normally!
Now working, but I´m afraid to open the cover to insert my sd as the last time it was when it was turned off
Orb,
That sounds like it when into DL mode. On the flyer once you get out of DL mode it's normally fine after that. It seems to be random, mine did it once or twice, leedroid has seen it as have a few others.
After it boots again it goes back to normal.
Hi mate,
Thanks for your reply.
Very strange behavior. After all above mentioned I was able to use is perfect, even updated to OTA Honeycomb all went ok, installed some apps, etc.
Then decided it was time to test again to remove the cover and install my sd card, just in the minute I touched the back , not even finished of removing, and Flyer went screen off, now again I can´t turn it on. Could be a short circuit or something?
I will leave it connected to wall charger for the night and hopefully tomorrw will be able to turn it on again....
I swear never again to remove the back cover
PS: I checked battery level before all this and it was in 77%, now red led on power button is on...
globatron said:
Orb,
That sounds like it when into DL mode. On the flyer once you get out of DL mode it's normally fine after that. It seems to be random, mine did it once or twice, leedroid has seen it as have a few others.
After it boots again it goes back to normal.
Click to expand...
Click to collapse
orb3000 said:
Hi mate,
Thanks for your reply.
Very strange behavior. After all above mentioned I was able to use is perfect, even updated to OTA Honeycomb all went ok, installed some apps, etc.
Then decided it was time to test again to remove the cover and install my sd card, just in the minute I touched the back , not even finished of removing, and Flyer went screen off, now again I can´t turn it on. Could be a short circuit or something?
I will leave it connected to wall charger for the night and hopefully tomorrw will be able to turn it on again....
I swear never again to remove the back cover
PS: I checked battery level before all this and it was in 77%, now red led on power button is on...
Click to expand...
Click to collapse
That's weird, if it's not too much could you try and get a logcat (adb logcat) when its screen goes off while opening the cover. That should help us establish whether this is a HW problem(unique perhaps bad mainboard) or software problem (me,globatron,Lee, etc. experienced)
I can also confirm that it happened to me too couple of months back, but after soft reset it rebooted fine, but the backcover issue is new.
Sent from my HTC Flyer P510e using XDA Premium HD app
hello
Im orbs friend, my htc flyer still having the prob, everytime i touch the cover or pusih it by accident it goes back.
What I do is leaving it charging for awhile and press power button and vol down at the same time for around 30 sec for a couple of times and then it re start. Im guessing its not a software problem i dont find an explanation i even updated it to 2.3.4.
Last night i fell asleep and my phone died all the way, and now when i plug it in all i get is a lg logo then it goes away and then a dark lit up screen. ive let it charge for awhile now and i still get nothing, i cant get into cwm either.. the phone is unlocked and rooted and im running the base rom. Any help would be greatly appreciated.
Happened to me... leave it on the charger at least 3 hours and check it. The battery completely drains when you unplug the charger if you charged with the phone off. gl
Edit: If it still won't work, turn phone on and plug in charger.
Sent from my LG-E970 using xda premium
Pony Express said:
Happened to me... leave it on the charger at least 3 hours and check it. The battery completely drains when you unplug the charger if you charged with the phone off. gl
Edit: If it still won't work, turn phone on and plug in charger.
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
This happened to me too. I completely drained the battery and it kept going into a loop (black screen, LG logo, battery screen). I left it plugged in and off and let it boot up.
FYI
This has happened to several people. I have confirmed through testing, even exchanging my phone 2 days ago that this is an issue created when unlocking the bootloader. Rooting does not cause it. Once the bootloader is unlocked, you can not get around this by re-locking the bootloader.
The workaround is simple. Either leave your phone on while it is charging or if you charge with phone off, unplug your charger and hit the power button- you will still see the charge animation running- this is what causes the battery to drain. All you have to do is power up the phone at least to boot then it is ok to turn off. You can confirm it worked by touching the power button again and not see the charge animation. Hope this helps.
Wow thanks so much for the reply and help! I've got it working now and I guess I'll just avoid it by not letting it die lol
Sent from my LG-E970 using xda app-developers app
well...
If you let it die all the way, its not a big deal. Plug it in, hold down the volume down button and the power button for 15 seconds, then it will work fine.
Threads like this makes this forum so great. Another potential problem to be avoided when using the phone.
Sent from my Nexus 7 using xda premium
I could use some help guys, if this thread isn't too old. I've searched high and low to the answer here and nothing is working. I've tried download mode, fastboot, recovery, reset, holding power down, plugging it in and unplugging it. I've pulled the plate off of the battery, tried LGNPST, drivers, etc. No go on anything.
The phone is still dead, and will not turn on. The best I've gotten is a solid red light after holding the power button for 15-20 seconds. Then after about 3-5 seconds it resumes flashing (alternating between the red light and the key buttons). If I continue holding the power button down it will repeat this, showing solid red and then reverting to flashing.
I can not get the screen to display anything, not even the charging animation, and none of my computers will even recognize the device. I've been messing with it all day and I'm stuck. If anyone can help me, at all, please do. I hate going to Sprint. Anything but that, please.
thistimearound said:
I could use some help guys, if this thread isn't too old. I've searched high and low to the answer here and nothing is working. I've tried download mode, fastboot, recovery, reset, holding power down, plugging it in and unplugging it. I've pulled the plate off of the battery, tried LGNPST, drivers, etc. No go on anything.
The phone is still dead, and will not turn on. The best I've gotten is a solid red light after holding the power button for 15-20 seconds. Then after about 3-5 seconds it resumes flashing (alternating between the red light and the key buttons). If I continue holding the power button down it will repeat this, showing solid red and then reverting to flashing.
I can not get the screen to display anything, not even the charging animation, and none of my computers will even recognize the device. I've been messing with it all day and I'm stuck. If anyone can help me, at all, please do. I hate going to Sprint. Anything but that, please.
Click to expand...
Click to collapse
Dude i had the same isse like your did, so i search everywhere and endup here. I'd try many think like you said, when holding volume+ and power there nothing heapen but volume down and power, or just hold the power buton there red light of front led is flashed, and ... is realy dead.
I can't go to any sevice central, coz my friend bring this telus P973 for me from another contry, and im living at the mountian lol. So im about to take it to nake and try to reset by reputing the batery. Devil beside me, i have 2 extra LG Lu6200 but 1 got broken the touch system, the other been death after i take a shower, Optimus G is using small sim and i'hv cuted it, there no other phone i can use that sim for tomorow, my girlfriend sending me some monney tomorow, and i have to meet my new boss and taking a new job that's make me traveling alot, and i don't have a laptop.
Don't know what to say when looking at the black cold silent phone i used to like most....
Some body, please help!
I went to restart my TS and now it won't switch back on at all.... nothing happening and no response... I have left it on charge and it gets slightly warm but nothing happens?? Any ideas??
death_entry said:
I went to restart my TS and now it won't switch back on at all.... nothing happening and no response... I have left it on charge and it gets slightly warm but nothing happens?? Any ideas??
Click to expand...
Click to collapse
You tried holding the power button down for more than 2 seconds?
I don't think that will help. The watch arrives set in quickboot mode and it can crash in that mode and not restart right. Might be the problem here, or his display backlight might have failed. Or his power button might have failed.
Anyway, try a battery pull. A full restart after a real shutdown via battery pull will probably recover the watch to where you can go in and disable quickboot.
Instructions are in other threads.
Sent from my Nexus 5 using Tapatalk
Yeh I tried holding down every button etc for looong time... Today it's actually it's started working again clever tactics I tried....
Stop playing it with it for a day (Vital part this!)
Plug it into computer for 15mins
Hold power down.... it came on Woop
death_entry said:
Yeh I tried holding down every button etc for looong time... Today it's actually it's started working again clever tactics I tried....
Stop playing it with it for a day (Vital part this!)
Plug it into computer for 15mins
Hold power down.... it came on Woop
Click to expand...
Click to collapse
One thing that people need to be aware of--after doing a Cache and Dalvik wipe in TWRP Recovery--the phone can 'seem' like it's stuck in Boot mode--BUT, it's just taking it's time to re-align all the apps, software etc... and I mean at least 10 minutes of looking at a stationary Boot screen--it worried me first time.
Well, mines gone too. It was fully charged. I was listening to music, turned off the app, put watch on standby and when I went to check the time the thing won't turn back on. Tried connecting it to the charger but no response. I'm going to open it up and see if that works. I know I'll loose my warranty for this (doubt I have one as I got mine through Expansys.jp), If it doesn't work then I can confirm that swett, and not much of it will break your truesmart.