I did this went great !
Bill
http://www.wpcentral.com/force-updating-your-windows-phone-os-build-8107-tutorial
Need another mirror for Forge Update.zip
alphaacres said:
I did this went great !
Bill
http://www.wpcentral.com/force-updating-your-windows-phone-os-build-8107-tutorial
Click to expand...
Click to collapse
Is it interop unlock available since it is not OEM tweaked?
dragon_76 said:
Is it interop unlock available since it is not OEM tweaked?
Click to expand...
Click to collapse
No interop unlock this is a OS update
I have done this repeatedly exactly as directed and I keep getting the unknown error after the successful backup.
Any suggestions?
For whatever reason, when the phone restarts in backup mode, the computer cannot communicate with it, even thought the driver is installed. I had to (upon the phone turning off after being shut down by cab sender) pop the battery out and reinsert it and hold down the vol down button (hence putting it in backup mode myself) and plug the phone in again. This process allowed it to properly communicate with the computer. However, this process, nor the natural way of things yields a successful restore process from successful backup!
vitkon said:
Need another mirror for Forge Update.zip
Click to expand...
Click to collapse
here it is
alphaacres said:
here it is
Click to expand...
Click to collapse
Just forced my AT&T Titan to 8107 from 7740 and now the "Phone" tile doesn't work. I cannot bring up the keypad to make a phone call. Any one else experience this issue?
Backing down to 7740.
rgencarn said:
Just forced my AT&T Titan to 8107 from 7740 and now the "Phone" tile doesn't work. I cannot bring up the keypad to make a phone call. Any one else experience this issue?
Backing down to 7740.
Click to expand...
Click to collapse
I am having the same problem. I had to go back to 7740 until someone figures this issue out
lvhcred said:
I am having the same problem. I had to go back to 7740 until someone figures this issue out
Click to expand...
Click to collapse
Here are the steps. I needed to install the language pack as well as the actual upgrade cab. It does work!
http://www.wpcentral.com/force-updating-your-windows-phone-os-build-8107-tutorial
Don't know if the AT&T Titan supports multiple UI languages but make sure you install ALL language packs for the languages on the phone or it is likely that your next update will fail as it assumes that all of those are present (that's the issue that led to the "walshed" phones when forcing Nodo).
I don't have that issue. But I didn't stop at 7740. I went from 7720-8107. I haven't found any issue nor have I found any changes either. I read that the only differences were in Gmail sync issues and exchange issues.
Sent from my PI39100 using XDA Windows Phone 7 App
0409 English cab is in the zip with other cabs
Moved To General
Please only post development threads in this section
I am getting errors that will not allow me to backup
I am getting the following issue when trying to update - error 80070013
Seems like this is related to this issue - http://forum.xda-developers.com/showthread.php?t=1481445
However that issue only has a solution posted for Zune updates. Since AT&T is screwing us for that, does anyone have ideas for how to bypass this problem with the cab sender?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rgencarn said:
Just forced my AT&T Titan to 8107 from 7740 and now the "Phone" tile doesn't work. I cannot bring up the keypad to make a phone call. Any one else experience this issue?
Backing down to 7740.
Click to expand...
Click to collapse
I had the same issue. You are missing a language file. Looks like some of the Titans have more than English installed. Revert to 7720 and grab the languages cab. Unzip them all to the cab sender folder. Then run the update. No more phone tile issue!
Also, be sure to place the cab sender folder in the root of C drive. Use an elevated command prompt to start "WP7 Update Cab Sender.bat" after starting the UPDATEWP.EXE for your OS version.
disolitude said:
I am getting the following issue when trying to update - error 80070013
Seems like this is related to this issue - http://forum.xda-developers.com/showthread.php?t=1481445
However that issue only has a solution posted for Zune updates. Since AT&T is screwing us for that, does anyone have ideas for how to bypass this problem with the cab sender?
Click to expand...
Click to collapse
To update you have to be on 7720.68.. Your on 7720.03.. You need to download and install the 7720.68 update
I keep getting a "driver needs updated" error. Anyone else see this?
Sent from my PI39100 using XDA Windows Phone 7 App
adam_wingert said:
I keep getting a "driver needs updated" error. Anyone else see this?
Sent from my PI39100 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Are you using the latest Zune? When you phone is connected to Zune (PC) when you do an Update Check from "Windows Update" does it show an optional update for a WP7 driver?
In the past windows update has given the option to update to a newer driver... Not with the titan but you never know
I do have the newest Zune on my PC. I've tried using the windows phone support tool. It goes through rebooting the phone twice before giving me that error. I'll have to try Windows update
I appreciate your response and ill let you know how I make out. Thanks
Sent from my Titan using XDA Windows Phone 7 App
Related
Windows Mobile 6.5.5 Base Rom (Build 23541)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a clean rom of Windows Mobile 6.5.5 (Build 23541) with the default Microsoft user interface and no modifications to sounds, boot screens and such. I have retained a few applications which include
Adobe Reader LE
Arcsoft MMS Client
Flash Lite DLLs
HTC Camera Application
HTC Comm Manager
HTC Wifi Router (Added)
JBlend Java
Microsoft Marketplace, MyPhone and Live Messenger
Office 2010
Remember to set the device locale, time and align the screen post install. If you do not (the first two) Windows Marketplace will not work.
Usual disclaimer: This works for me and is offered with the best of intentions, but I am not responsible for any device damage.
Updated to v2 04/04/10
Fix: Battery Application
Add: Sim Toolkit, ArcSwitch task manager
Password is my username
v2: http://www.zshare.net/download/74602080a143a030/
is that keyboard the default? it looks baaaaaad.
Other than that, thanks for the clean rom. d/ling now.
-double post-
Uppy said:
is that keyboard the default? it looks baaaaaad.
Other than that, thanks for the clean rom. d/ling now.
Click to expand...
Click to collapse
Yup it is the default one, but this is intended as a more 'Microsoft' build rom and it is easy to add another one with a cab file.
I quite like the HTC ez-touch keyboard, my only real issue with it is the hold delay, which is what? 2 seconds? should be 0.5 - 1 second at the most for speed texting, this is something fingerkeyboard rectifies.
But either way, with this clean rom, LOTS of new roms can be made thanks again!
what can I do, to make the same ROM, but only with russian languege?
There is a bug in that rom. When I'm trying to open battery settings there is message: "The file 'powerexe' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.'.
I've done hard reset after flashing - nothing changed.
vekh said:
There is a bug in that rom. When I'm trying to open battery settings there is message: "The file 'powerexe' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.'.
I've done hard reset after flashing - nothing changed.
Click to expand...
Click to collapse
Thanks for pointing that out, looks like I trimmed the packages slightly too hard and missed the power screen. Just trying out a v1.1 of this rom and will post an update later today.
I find out that there is no way to copy contacts from sim card too
vekh said:
I find out that there is no way to copy contacts from sim card too
Click to expand...
Click to collapse
Updated then first post with a new download that fixes that and the battery issue.
fatherjack360 said:
Updated then first post with a new download that fixes that and the battery issue.
Click to expand...
Click to collapse
If everything is fixed now we only need new keyboard.
mirost1 said:
If everything is fixed now we only need new keyboard.
Click to expand...
Click to collapse
Install resco keyboard or smth else and you will be happy
vekh said:
Install resco keyboard or smth else and you will be happy
Click to expand...
Click to collapse
Indeed, if I change the keyboard someone else will get upset about that one
I'm going to flash your ROM as soon as the download will complete... have you a keyboard .cab to suggest? I'm really a rookie and I don't know which are the alternatives for the keyboard!
fatherjack360 are you cut off option to choose USB connection type (Active Sync, Data Storage or Internet Sharing)? Because I can't find that one.
vekh said:
fatherjack360 are you cut off option to choose USB connection type (Active Sync, Data Storage or Internet Sharing)? Because I can't find that one.
Click to expand...
Click to collapse
Yes that is a HTC application not part of Windows itself.
Thanks for upload
gps ephemeris
Hallo, nice rom, thanks indeed for hard work. I noticed a stable, fast ROM. Still I have 2 things to mention.
1. If PIN is enabled, it is very hard to get to PIN menu after reset, only by going to Comm manager and activating plane mode and deactivating it.
2 . and most important, where is the utility to update ephemeris, GPS file support downloaded from internet?
Thanks alot
I love default keyboard based ROM.
But without ArcSwitch task manager will be a perfect clean one.
Anyway,thanks indeed for hardwork
yetran said:
I love default keyboard based ROM.
But without ArcSwitch task manager will be a perfect clean one.
Anyway,thanks indeed for hardwork
Click to expand...
Click to collapse
Without ArcSwitch there would be no task manager capability of any kind, I am not replacing the built-in one (there isn't one, the normal one comes from HTC). I figured this was a fairly critical core thing to have.
As some of you know, MR4 is set to roll out in stages starting today (July 16th) and is said to have many updates. Here is a list: Click
Does anyone know if this maintenance release will fix the "Silent Call" bug?
Looks as if that pdf is incorrect. The way that is describing its 2.1. I think Verizon forgot to update that particular pdf.
MR4 update is not Froyo. It should however fix the silent call bug on the device. I care not anymore as I have root, but it is still indeed going to be 2.1. I don't think the Eris is capable of having Froyo with HTC sense uploaded into the device. It might be too much for it, and that's ASSUMING that VZW will get the update sent out correctly this time.
Shadow
Just root and get KaosFroyo!
I already know it isn't 2.2. I was just asking if it would fix the particular bug I was talking about...
I actually called customer service and they told me it was rolling out on July 16th and my device would get it within 7 days. I didn't think I would get it 10 minutes after getting off the phone with her! I am now on MR4. Only time will tell to see if this "Silent Call" bug is fixed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its kind of impossible for anyone to answer your question since youre the first report of someone receiving the update that Ive read ........ so how would anyone know?
of course the only way someone will know is for a person who likes to come to forums and ask alot of questions about will this do this or this do that to actually capture the link when they do the d/l so that the devs can pick it apart
this way instead of just asking questions that are impossible to answer..... the person might actually provide the information to make receiving an answer possible
just my 2 cents early morning rant
HTC Legion said:
I already know it isn't 2.2. I was just asking if it would fix the particular bug I was talking about...
I actually called customer service and they told me it was rolling out on July 16th and my device would get it within 7 days. I didn't think I would get it 10 minutes after getting off the phone with her! I am now on MR4. Only time will tell to see if this "Silent Call" bug is fixed.
Click to expand...
Click to collapse
If anyone else gets this, please capture your URL.
bftb0 said:
The OTA .zip files which are downloaded from a Google server are not signed the same way as the RUU "rom.zip" files - they use the app .apk manifest signing method. (manifests and certs a la "jarsigner").
If you are interested in looking at the process that HTC/Verizon uses for the OTA updates, you can get the URL for the OTA zip the following way:
Run logcat on the pc and accept the update on the phone
$ adb logcat > logcat_accept.txt
This will sit like this (it continues to log output into the output file) until the phone reboots. At that point, the adb logcat job will terminate, and the name of the zip file will be indicated in the logfile in a message similar to:
W/SystemUpdateHelper( 64): !!! REBOOTING TO INSTALL /cache/desirec-ota-104882.7b1e5cca.zip !!!
Then, take the name of the file and paste it on the end of android.clients.google.com/updates/partner, for instance, for the Eris 1.17.605.1 OTA, the complete url is:
https://android.clients.google.com/updates/partner/desirec-ota-104882.7b1e5cca.zip
Note: because the 2.1 release is so vastly different than the 1.5 release, an OTA (if that's the way VZW/HTC rolls it out) for that will probably be very different than a patch release like this example ... but it would still be very useful for anyone who gets notice of an update to capture the URL using the "logcat" method shown above. There might be "interesting" tools included that could be exploited.
I don't think this will help get an "early OTA" - I'm not sure that hboot/fastboot methods can make use of an "update.zip" with an unrooted phone. Someone can correct me if I am wrong about that.
bftb0
Click to expand...
Click to collapse
Sorry, I didn't know. I just though it would be some information that I missed. I know I'm new here, but you don't have to treat me like I'm an idiot. Jeez. =[
Sent from my Eris using Tapatalk
I was just wondering if anyone who has gotten this has tested the root methods to make sure they still work, or if Verizon has patched them.
Hi guys, if you are like me and didn't receive the new 12072 update yet, it's very easy to force it on your Lumia 800. I did it this morning, and my phone is locked and branded, and everything went well, so here is how to make it.
First, grab the update http://download.windowsupdate.com/msdownload/update/software/dflt/2012/04/oemupdate.cab.pks_98ed59ede38f0bd78d153d984fcb96e119de2ccd.cab. It's a cab archive, so don't extract it, just leave it as it is.
Then download this tool and install the x32 or x64 version according to your configuration.
Now download this one and simply extract it in a folder. Connect your Lumia to Zune and wait for the sync process to end. Close Zune. Put the .cab file in the same folder than the tool called WP7 cab sender, at the root of the file "WP7 Update Cab Sender.bat", it's important.
Launch the batch file "WP7 Update Cab Sender.bat", an msDos window should open, asking you to choose a letter for an option: choose the option of your choice but don't forget to make a backup before installing the new update.
Then you only have to wait for the backup / update to end. Don't close the MS-DOS window before the end of the process. It's done, your phone is now running the new update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well technically its a command prompt and not a "MSDOS" I update mine a few minutes ago. The whole procedure with backup should take about 20 minutes.
Yup. And the Volume bug does indeed seem to have disappeared
Sent from my iPad using Tapatalk
Big Yes,
it seems to fix the volume bug, which was a big issue for me.
For the rest, I don't know; I only have had it for 5 minutes!
Thank u a lot,the bug audio disappear now
Thanks for instructions/link.
Easy update, everything working.
Seems that the audio bug (using the headset during a call) disappeared for me too.
does this mess with the bootloader at all?
can't w8 to try it~~~
Just got the update today, Vodafone, Netherlands.
(Pre-ordered Lumia 800 from Vodafone webstore)
Thank God for this site.. The did the links and instructions from Mobiletechworld.com and the cab sender refused to see the update.
Used the ones in this post and the update went PERFECTLY!
bit lost what .cab file do i need to put in folder ? mine is just creating logs ?
andy1969 said:
bit lost what .cab file do i need to put in folder ? mine is just creating logs ?
Click to expand...
Click to collapse
This one
yep have done that dont get option to update just a message press any key to continue i do and it says reading device then a link to saved log files what am i doing wrong.
andy1969 said:
yep have done that dont get option to update just a message press any key to continue i do and it says reading device then a link to saved log files what am i doing wrong.
Click to expand...
Click to collapse
You must extract the archive called WP7+Update+Cab+Sender.zip.
This will create a folder called the same name: WP7+Update+Cab+Sender.
Place your cab archive inside this folder, just where is located the file called WP7 Update Cab Sender.bat
Run this batch file and select option number one, "S ·(S)end Cabs to device"
The update should then start.
I PRESS S THEN ALL I GET IS BELOW MESSAGES
moving files to log directory
cleaning usless files
done
press any key to continue
so i press s nothing happens get above message again
andy1969 said:
I PRESS S THEN ALL I GET IS BELOW MESSAGES
moving files to log directory
cleaning usless files
done
press any key to continue
so i press s nothing happens get above message again
Click to expand...
Click to collapse
Ok try this: double-clic on the folder called "Tools", then on x64 or x86 according to your configuration. Launch then the file "UpdateWP.exe".
Back in the folder "WP7+Update+Cab+Sender", double-clic on "if needed install this tool", then on "x64" (64 bits) or "x86" (32 bits) according to your config. Finaly, launch "Setup-UpdateWP-x64/x86.exe".
Votre ordinateur est paré pour la mise à jour.
Just did my second cab sender update. Why are operators so slow when it comes to these things? I mean, it's a minor update, isn't it? Thank you.
PS: I had someone call me while listening to music; no longer shock therapy. Everything seems fine now
Thank you for the easy to follow post on how to update.
Having too tried to follow instructions posted elsewhere, and failed, managed to update quickly and easily this time.
does forcing this update wipe all your apps/messages etc?
Updated 20-02-2015
Introduction
This is a Graphic User Interface Toolkit for the OnePlus One.
It will allow you to perform all the basic root actions for the OnePlus One easily.
YOU NEED TO HAVE THE USB DEBUG ON ALL THE TIME
If the program not open, you need to download PowerPacks.dll (link below) and put it in the same folder as the program.
Features:
- Install ADB drivers
- Unlock bootloader (Needed to do all actions)
- Lock bootloader
- Root
- Flash CM11S
- EFS Backup/Restore (1st program to do this in OnePlus One)
- Boot and Flash custom recoveries
- Flash custom kernels
- Auto Update
- Install .apk's
- Backup/ Restore phone
- Record screenshot and movie
Future updates:
- BugFixes
- More options
Note: This program was based on the gui manudroid19.
This program is not JAVA, you need to have installed net framework 4.5 to run it.
Im not responsable if you brick your phone.
I suggest you do the EFS backup soon after making root before any process.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download v1.3: MEGA
Direct Download: Direct Download
PowerPacks.dll: MEGA
Changelog:
CLICK HERE
Donate:
wow this is handy! Thanks a lot for this!!
In v1.0.1 im gonna put new root method. (No wipe the device)
Awesome. I will try this today when i get my device.
If someone found some bug post it please
Today I will receive my OPO, will use it and report.
thanks a lot bro
I wonder why non of these toolkits have UnRoot feature implemented??
Won't Install
I'm getting an error when trying to install. Has anyone been successful?
Mikey said:
I wonder why non of these toolkits have UnRoot feature implemented??
Click to expand...
Click to collapse
To unroot go to SuperSU settings.
IReptheking what are you trying install?
What is the error?
Will this work with Windows 8.1?
jbass350z said:
Will this work with Windows 8.1?
Click to expand...
Click to collapse
I think yes.
Try it
when i try to download the cm 11s rom, it says error occured!
aldaris565 said:
when i try to download the cm 11s rom, it says error occured!
Click to expand...
Click to collapse
Cause you click 2 times in the Download button.
Click only once, wait and will see the bar moving.
The download takes some time to start (depending of your internet).
v1.1 is out!
extream87 said:
To unroot go to SuperSU settings.
IReptheking what are you trying install?
What is the error?
Click to expand...
Click to collapse
Let me reword this........return the phone back to stock.
Mikey said:
Let me reword this........return the phone back to stock.
Click to expand...
Click to collapse
To return the phone back to stock just install CM11S.
v1.1.1 is out!
Comment the thread please.
Tried functions (not their functionality) and worked quite well. I am still waiting for my 1+1, still under processing..
I have one question though, is it possible to allow this utility to flash own files like recovery or kernel without downloading any by referring to our own copies? If not, can that be implemented in any future version?
Newest version still opens and says outdated, and trys to prompt me to download the EXE file again, over, and over, and over. Disconnecting from the internet should fix this problem, but i mean, really, who does that anymore.
--
and when started without internet connected, straight to run time errors from trying to connect to dropbox on start, and having improper try/catch methods for startup.
#vbmasters
jbass350z said:
Will this work with Windows 8.1?
Click to expand...
Click to collapse
does not work on windows 8.1 :crying:
nicesoni_ash said:
Tried functions (not their functionality) and worked quite well. I am still waiting for my 1+1, still under processing..
I have one question though, is it possible to allow this utility to flash own files like recovery or kernel without downloading any by referring to our own copies? If not, can that be implemented in any future version?
Click to expand...
Click to collapse
This is hard to do.
docsparks said:
Newest version still opens and says outdated, and trys to prompt me to download the EXE file again, over, and over, and over. Disconnecting from the internet should fix this problem, but i mean, really, who does that anymore.
--
and when started without internet connected, straight to run time errors from trying to connect to dropbox on start, and having improper try/catch methods for startup.
#vbmasters
Click to expand...
Click to collapse
Try this, when you download the new version, delete the older.
Im not getting this problem here.
jejemc said:
does not work on windows 8.1 :crying:
Click to expand...
Click to collapse
You have tried in compatibility mode? What is the error?
I can't update my system software.. I have downloaded the full update and when I install it, itswitch offs and showing this message... My phone is a chineese variant d816w...is it because of that..Plz help me to find a solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC D816w using Tapatalk
Is your phone modded? Does it have a customer recovery? In order for a device to install a completely stock factory ota update. Your device needs to beat a factory state
akhilsaj said:
I can't update my system software.. I have downloaded the full update and when I install it, itswitch offs and showing this message... My phone is a chineese variant d816w...is it because of that..Plz help me to find a solution.
View attachment 2948852
Sent from my HTC D816w using Tapatalk
Click to expand...
Click to collapse
As the above guy says , you can't install update with a custom recovery . Just change your recovery mode to factory version and try to install it .
It was worked for me for a months before
regards,
AlfasPeralassery
Sent from my GT-S7562 using XDA Premium 4 mobile app
Clearly the picture shows that it is the stock recovery, so I don't understand the last couple of comments about that...
OP: What update were you on? Did you download the system update from the phone? The first poster was right about changes made because changing some things in the system will create this problem on some phones. I would see if there is an RUU from HTC to update via the PC or via SD card (they don't sell that model here so not entirely sure which way they use for that model).
akhilsaj said:
I can't update my system software.. I have downloaded the full update and when I install it, itswitch offs and showing this message... My phone is a chineese variant d816w...is it because of that..Plz help me to find a solution.
View attachment 2948852
Sent from my HTC D816w using Tapatalk
Click to expand...
Click to collapse
Have you tried updating through Kies? Sometimes Kies helps when OTA updates don't work.
TheArc said:
Is your phone modded? Does it have a customer recovery? In order for a device to install a completely stock factory ota update. Your device needs to beat a factory state
Click to expand...
Click to collapse
just as what he said
AppleCultApostate said:
Have you tried updating through Kies? Sometimes Kies helps when OTA updates don't work.
Click to expand...
Click to collapse
He has an HTC, not a Samsung device.
system update
es0tericcha0s said:
He has an HTC, not a Samsung device.
Click to expand...
Click to collapse
i have the factory version only . i haven't modded my phone.. i downloaded update through wi-fi and when it begins to install it reaches half and the phone just boots up normally and i checked the version the update hasn't happened.. the stock version was sense 5.5 and still it is.. How can i update my phone.. what do i need to do....
akhilsaj said:
i have the factory version only . i haven't modded my phone.. i downloaded update through wi-fi and when it begins to install it reaches half and the phone just boots up normally and i checked the version the update hasn't happened.. the stock version was sense 5.5 and still it is.. How can i update my phone.. what do i need to do....
Click to expand...
Click to collapse
Sounds like a corrupted or incomplete download then. Without knowing which version and/or region the phone is from, then no one can be of much further help. It's rare that this happens on phones that have never been modified, but it's not the first time. Typically it is resolved by just running the RUU, but it's quite possible there isn't one yet for that device and update. If you do not know the specifics of the phone, then it is best to set up fastboot http://forum.xda-developers.com/showthread.php?t=2317790 and boot to the bootloader and while connected in Fastboot mode to run the command from a Command Prompt: fastboot getvar all and post the results (leave out the IMEI and serial numbers).
This MIGHT be what you need: http://forum.xda-developers.com/desire-816/general/updates-htc-desire-816wdual-t2850329 - IF it is the correct region for where your phone was originally sold.
General outline for manual OTA install:
Make sure to have the correct CID and MID on your phone. (see: fastboot getvar all output for this info)
Make sure to have the correct Stock ROM version software on your phone.
Make sure to have the stock Recovery installed. (you already have this so skip)
Copy OTA file to SDCARD
Boot to Stock recovery and once at the triangle, press volume up + power to get the blue recovery menu. Then select ‘install from internal memory’ (or something like that) and find the file.
Update should install and your firmware and software should both match the version of the OTA Update.
I have NO idea if the xda link for the OTA is the correct one for your phone, so don't blame me if you don't research to see if it is the one you need and you mess up your phone. Good luck.