Which kernel do you use? - HTC Rezound

Do you use the same kernel that Your ROM provides or do you branch off and use another?

I use the AnthraX kernel with CleanROM 1.7.5 and my rezound flies
http://forum.xda-developers.com/showthread.php?t=1506892

If you're running the latest ICS leaks, it's the one that came with it or SebastianFM's overclock kernel, really nothing else out there since the source code hasn't been released for ICS kernels yet.

mjones73 said:
If you're running the latest ICS leaks, it's the one that came with it or SebastianFM's overclock kernel, really nothing else out there since the source code hasn't been released for ICS kernels yet.
Click to expand...
Click to collapse
Ah never knew the kernal codes weren't released
Sent from my ADR6425LVW using xda premium

My setup is in my sig.

im still on GB and i run that bamf cubed kernel, seems very stable.

anthrax kernel on cr 1.75 gb as well. GREAT combo for emulation and overall app compatibility btw

I tried anthrax for a while but my system reset or boot looped at least once every 24 hours.
That doesn't work for me. I flashed to incredikernel 6 the day it was released and it has been 100% totally stable ever since. My system will basically run indefinitely without a reboot at this point.
Whenever I flash a new ROM or kernel, the first thing I do is run stability test v2.3 all night on it. If it's still running after that, I know it's good to go.

I had been running Incredikernel 6, and it was super stable.
I'm on Incredikernel 3-1 right now, its still really stable. I had a couple bootloops, but that was from playing with the voltages Backed off on the voltages a bit, its all good now.
Sent from my ADR6425LVW using XDA

jmorton10 said:
I tried anthrax for a while but my system reset or boot looped at least once every 24 hours.
That doesn't work for me. I flashed to incredikernel 6 the day it was released and it has been 100% totally stable ever since. My system will basically run indefinitely without a reboot at this point.
Whenever I flash a new ROM or kernel, the first thing I do is run stability test v2.3 all night on it. If it's still running after that, I know it's good to go.
Click to expand...
Click to collapse
I've never had 1 reboot or bootloop with AnthraX.

I am running the 3.0.16 kernel from Sebastian so far with no problems. Prior to that, I was using the stock HTC kernel from the leak before the last supposedly "official" leak..

a.mcdear said:
I am running the 3.0.16 kernel from Sebastian so far with no problems. Prior to that, I was using the stock HTC kernel from the leak before the last supposedly "official" leak..
Click to expand...
Click to collapse
I'm currently on that kernel aswell
Sent from my ADR6425LVW using xda premium

dogredwing1 said:
I've never had 1 reboot or bootloop with AnthraX.
Click to expand...
Click to collapse
How long have you run without rebooting??
The problems I had with anthrax seemed to be exactly the same as about half the posters in the thread on it.
I was checking every day for a while to see if it was updated, but it has been over a month with no updates & I think it's been abandoned at this point.

jmorton10 said:
How long have you run without rebooting??
The problems I had with anthrax seemed to be exactly the same as about half the posters in the thread on it.
I was checking every day for a while to see if it was updated, but it has been over a month with no updates & I think it's been abandoned at this point.
Click to expand...
Click to collapse
I ran it about a week without rebooting. The dev account has been disabled you can check infectedrom.com for more info about anthrax kernel

Related

S-off and wanting to return to GB firmware?

has anyone done this yet? i want to stay on ICS, but ever since the ICS firmware that i got when it first leaked, the battery has gone to ****. i see some people getting crazy battery life still on GB firmware but running ICS roms, so i'm wondering, where can i go to get the GB firmware back? if i were to flash that RUU or whatever (with s-off), then restore my nandroid from right now, would that restore my ICS firmware, or would that be good?
jayochs said:
has anyone done this yet? i want to stay on ICS, but ever since the ICS firmware that i got when it first leaked, the battery has gone to ****. i see some people getting crazy battery life still on GB firmware but running ICS roms, so i'm wondering, where can i go to get the GB firmware back? if i were to flash that RUU or whatever (with s-off), then restore my nandroid from right now, would that restore my ICS firmware, or would that be good?
Click to expand...
Click to collapse
im doing it and i absolutely love it and you can still enjoy ics roms and sense 4 roms and have crazy battery.
to go back just backup and run the gb ruu and install the rom of your choice.
http://www.filefactory.com/f/c2e320ee1d5c7886/
as for your nandroid question i honestly have no clue. youd have to ask someone whos more familiar with recoveries and how nandroid works
thanks dude! so you're running ics right now, and on gb firmware? what kind of battery life are yo getting?
Sent from my ADR6425LVW using XDA App
Personally, I did the same , but didn't notice appreciably better battery life. Then again, I never really complained to begin with. I recently did flash back to the newest ICS leak so I could quit having to flash patches . I only have 3g though, and use wifi at home so your use will definately vary than mine .
jayochs said:
thanks dude! so you're running ics right now, and on gb firmware? what kind of battery life are yo getting?
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Well this week im trying out clean rom gb. Last few weeks I was on the pokemon rom.
I get an easy 14 hr day with 3-4 hrs screen time and close to 5 if I'm lucky.. But you gotta take into account a few things if you want this kind of life:
1. I have debloated and desensed very extremely
2. I don't EVER use task killers. More harm than good
3. On incredikernel and have uc/uv
4. I use watchdog and autostart manager to watch my cpu usage.
If I didn't do this stuff my screen time would only be around 3hrs which is still great but I just like to push it
Sent from my ADR6425LVW using XDA
wait, how do you use a custom kernel on ics??? I thought all we had was the stock kernels because we don't have the source?
Sent from my ADR6425LVW using XDA App
jayochs said:
wait, how do you use a custom kernel on ics??? I thought all we had was the stock kernels because we don't have the source?
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
There's a couple of custom kernels, but they're basically the same as stock with little tweaks.
I Am Marino said:
There's a couple of custom kernels, but they're basically the same as stock with little tweaks.
Click to expand...
Click to collapse
so then i doubt running those would help any?
Not really. If your running an ics rom stick with stock kernel. I have a custom one because I'm running gb clean rom
Sent from my ADR6425LVW using XDA

ok, what ROM are you on right now, and why?

just like the title says my friends, what ROM and why? likes? dislikes?
Thank you!
Clean Rom 4.5
S-On
Because I'm stupid at HTC phone modding and it seemed easy as hell to put on my phone
the complete 3.14 leak, only rooted it and froze all the bloatware.
it's fast, it's stable, and I get the same, if not better battery life than the stock GB I was on previously.
Currently at 53% battery at 10.5 hours on battery with 50 minutes of screen-on time.
I am s-off.
thatsricci said:
the complete 3.14 leak, only rooted it and froze all the bloatware.
it's fast, it's stable, and I get the same, if not better battery life than the stock GB I was on previously.
Currently at 53% battery at 10.5 hours on battery with 50 minutes of screen-on time.
I am s-off.
Click to expand...
Click to collapse
Are you using 4g or 3g?
Team PkmN - Venasaur Rom v3.1.0
Cause it's got the best Rezound devs working together on it and I've had no problems with any of Joelz's ROMs on any device I've run
Argent36 said:
Team PkmN - Venasaur Rom v3.1.0
Cause it's got the best Rezound devs working together on it and I've had no problems with any of Joelz's ROMs on any device I've run
Click to expand...
Click to collapse
any idea if the nwe 3.2 version with the RIL fix is better? i was not very happy initially with that rom. was slow to me anyway. but i LOVE sense4.0.
CleanROM DE ... closest thing available to AOSP. The thing I really wished I had while on AOSP on the EVO 4G was the Sense camera and phone. This has it!
Chingy 3.6 Rom.
It's smooth as hell and I've never felt smoother. But I do like messing around with pokemon rom, I was on 3.1.
It was pretty cool.
Sent from my ADR6425LVW using xda premium
pkmon bc it works well and quick settings mainly
Cleanrom 4.5 standard. I've ran many other roms as well and they are all very good. I like the stock look and feel with some minor adjustments which cleanrom provides.
Rez Rom s4 v.2.4. Running great
Sent from my ADR6425LVW using Tapatalk 2
blestsol said:
Chingy 3.6 Rom.
It's smooth as hell and I've never felt smoother. But I do like messing around with pokemon rom, I was on 3.1.
It was pretty cool.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Same here, same reasons.
Sent from my ADR6425LVW using Tapatalk 2
blestsol said:
Chingy 3.6 Rom.
It's smooth as hell and I've never felt smoother. But I do like messing around with pokemon rom, I was on 3.1.
It was pretty cool.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
I'm also on chingys ineffibilis. Great rom, I tried a few others but this rom work best for me. I used his gb rom also
I'm on clean rom gb but I've been switching between ics roms and gb roms while staying on the gb firmware
Sent from my ADR6425LVW using XDA
I also just installed Ineffabilis Deus 1.0 this morning and I'm liking it. I was a fan of the Ineffabilis GB roms also.
Rezrom 2.4, because I wanted an ICS ROM with Sense 4.0 and it looked to be the most stable. First time unlocking/rooting/flashing and I managed not to brick it
I was tired of waiting for the OTA, and that didn't even have Sense 4.0 so as far as I'm concerned right now this software is better than anything the Rezound will ever get officially.
Scott's stock rooted ICS leak (3.14)
Updated firmware just to see how it works and have s-off.
Running this ROM solely to see how close it is to "right" - usually run Scott's CR 4.x
Sent from my ADR6425LVW using Tapatalk 2
Pkmon Rom
Need to flash latest but it's hard to when yesterday I got a full24 hours out of a single charge
Sent from my ADR6425LVW using xda premium
I'm using my own ROM based off the initial ICS 4.0.1 leak.
I'm using this particular leak because it's an early build, so HTC hasn't made as many significant changes to ICS yet... it has a lot less "Sense" in it, and plays nicer with more true AOSP files, and requires little work to fix most of the annoying bugs. I've added in my own ramdisk, init.d support, SebastianFM's OC kernel, a lot of the usual optimizations (zipalign on boot, sdcard tweeks, etc), and its great! I am trying to get that 100% AOSP look, however I still have the stupid Sense call screens to figure out..
Clean Rom 4.5 because it works and it's pretty fast. I'd like to try a Sense 4 Rom, but I need Bluetooth so until that's stable I just can't do it. Not for any length of time anyway. Looking forward to AOSP and maybe MIUI (fond memories on my Inc) or at least kernels for better batt life.
Sent from my Incredib... er... Rezound

[Q] Evil kernel making my screen flash

when i flash meanrom 4.6 and then overclock zip, when i boot up up my screen start to have fragments and start's flashing and it restarts, so anyone how what is the problem, im s off with lazy panda.
jarocho151 said:
when i flash meanrom 4.6 and then overclock zip, when i boot up up my screen start to have fragments and start's flashing and it restarts, so anyone how what is the problem, im s off with lazy panda.
Click to expand...
Click to collapse
Its possible that your phone is more sensitive to an overclock than others. Some just don't like it. You should be able to boot into recovery and flash the rom, just wipe cache, dalvik and system. You will still have all your settings but you will be back to the base kernel.
jarocho151 said:
when i flash meanrom 4.6 and then overclock zip, when i boot up up my screen start to have fragments and start's flashing and it restarts, so anyone how what is the problem, im s off with lazy panda.
Click to expand...
Click to collapse
my phone does the same thing when i install that kernel, the lock screen flashes once when booting. but that is the only thing i notice. i dont believe i have seen any artifacts after my phone is booted up.
just reflash the rom if you seem to be having problems and it will put the stock kernel back.
jarocho151 said:
when i flash meanrom 4.6 and then overclock zip, when i boot up up my screen start to have fragments and start's flashing and it restarts, so anyone how what is the problem, im s off with lazy panda.
Click to expand...
Click to collapse
Yea some phones don't play well being OC'ed
i think/believe that in the old base, my phone was able to overclock over 1.8Ghz. Do you think it could be the kernel?
my memory is a bit blurry, had the og and the 3D so its hard to remember. thanks for the response.
jarocho151 said:
i think/believe that in the old base, my phone was able to overclock over 1.8Ghz. Do you think it could be the kernel?
my memory is a bit blurry, had the og and the 3D so its hard to remember. thanks for the response.
Click to expand...
Click to collapse
try to dl it again and check the md5 to make sure they match might just be a bad dl
If it was a bad dl the file integrity would be compromised, it would most likely not work at all.
That kernel just didn't play nice with my phone I tried just about every combo of settings
Same her I think I'm just going to wait it out, I install meanrom 4.7 and overclock still not working, I guess its a miss voltage or something. I hope I could overclock my phone soon.
Fx 8150 overclock to 4.5Ghz
Sent from my EVO using xda premium
I came from stock rom and evilz kernel and had no problem with oc up to 1.9 and everything ran smooth. With MR I can't run any oc. Rom without oc is smooth as silk it just won't accept oc which leads me to believe the oc just doesn't play well with MR on my phone. I can oc, just not with MR! I'm s=off, lazy panda and have tried clean install plus dirty flash all the way from 4.0. It's not that my phone won't oc, it just won't oc with MeanRom! Hmmm, guess I'll just have to wait a while and continue to try with each new update. Even with all that, I'll continue to stay cause this rom IS VERY SMOOTH! Thanks for all your efforts Mike!
Sent from my EVO using XDA
jdonmc1948 said:
I came from stock rom and evilz kernel and had no problem with oc up to 1.9 and everything ran smooth. With MR I can't run any oc. Rom without oc is smooth as silk it just won't accept oc which leads me to believe the oc just doesn't play well with MR on my phone. I can oc, just not with MR! I'm s=off, lazy panda and have tried clean install plus dirty flash all the way from 4.0. It's not that my phone won't oc, it just won't oc with MeanRom! Hmmm, guess I'll just have to wait a while and continue to try with each new update. Even with all that, I'll continue to stay cause this rom IS VERY SMOOTH! Thanks for all your efforts Mike!
Sent from my EVO using XDA
Click to expand...
Click to collapse
I'm on MR v4.4.2 which has the EvilZ kernel I'm OC'd @1.9 with no issues I love it so much I have not updated
I'm getting over 20 hours with 3 hours of screen on
Sent From My POS MoPho
the problem is that it is under-volted too much for some phones, if you can boot up and get to system tuner or some other app and bump up the voltage 25-50mv it should work, it did for me after a week of trying with screen tearing and constant lock-ups and reboots. if i helped hit thanks please!
Thanks, I'll give that a try later this afternoon.
Sent from my EVO using XDA
Ok, jacked the voltage up 25mV and still was a little unstable. Went ahead and raised it 50mV and so far it's holding solid. Will keep you posted. Thanks again!
Sent from my EVO using XDA

Hotcakes 3.0 kernel. Thoughts?

I am flashing it atm and was wondering if any of you people tried with cm10 ROMs. P.S. sorry if this is in the wrong section.
ROM: CM10 Nightlies & Flapps ICS
Kernel: Hotcakez v3.0 1.83ghz OC
Recovery: TWRP2
Give Thanks To Help full Post
Most likely everyone has. Great kernel, great governors
Sent from my SAMSUNG-SGH-I717 using xda premium
How's the stability on it? Have you experienced any RR in a day or two on cm10? Just wondering
ROM: CM10 Nightlies & Flapps ICS
Kernel: Stock. & Hotcakez 1.8ghz OC
Recovery: TWRP2
Give Thanks To Help full Post
i think flappjaxx (sorry if misspelled) is the best JB action you can get at the moment. Ive tried just about every rom/ kernel out there. His latest is just awesome. 2 days and 19 hours I have been running his rom and kernel. I have it overclocked to 1.83 and used his gpu overclock tool . The thing just flies!! Awesome battery life and not a single reboot yet. I have no reason to switch to anything else at the moment.
joverclock said:
i think flappjaxx (sorry if misspelled) is the best JB action you can get at the moment. Ive tried just about every rom/ kernel out there. His latest is just awesome. 2 days and 19 hours I have been running his rom and kernel. I have it overclocked to 1.83 and used his gpu overclock tool . The thing just flies!! Awesome battery life and not a single reboot yet. I have no reason to switch to anything else at the moment.
Click to expand...
Click to collapse
Correct...
FJ has great skills, and is always generous beyond his means...
Donate much, donate often, to "all" of our generous developers.
And while I have called out FJ here, I in no way want to give the impression that I don't appreciate all of the great work here, from developers, to every day users...
Thank you !!....g
I have to agree... not a single random reboot since I loaded his 3.0 kernel and the 1/7 nightly.... I think his latest CM comitts and tweaks have fixed the CM bug that's been a PITA for everyone!
Great work FJ and welcome back to XDA!
bhaskell said:
I have to agree... not a single random reboot since I loaded his 3.0 kernel and the 1/7 nightly.... I think his latest CM comitts and tweaks have fixed the CM bug that's been a PITA for everyone!
Great work FJ and welcome back to XDA!
Click to expand...
Click to collapse
I loaded the JB kernel and have been getting screen freezes after about a minute of use and i have to force reboot. Any help?
joverclock said:
i think flappjaxx (sorry if misspelled) is the best JB action you can get at the moment. Ive tried just about every rom/ kernel out there. His latest is just awesome. 2 days and 19 hours I have been running his rom and kernel. I have it overclocked to 1.83 and used his gpu overclock tool . The thing just flies!! Awesome battery life and not a single reboot yet. I have no reason to switch to anything else at the moment.
Click to expand...
Click to collapse
Give Thanks!
Rom: Flapps ICS ROM
Kernel: Flapps kernel OC 1.8Ghz
Recovery: TWRP2
Why have cm10 night lies stopped at 1-07-13?
Not seeing "any" issues here at all...
Verify your download again, and full wipe/flash again if needed.....the kernel is as stable as any kernel I've used to date....g
bhaskell said:
I have to agree... not a single random reboot since I loaded his 3.0 kernel and the 1/7 nightly.... I think his latest CM comitts and tweaks have fixed the CM bug that's been a PITA for everyone!
Great work FJ and welcome back to XDA!
Click to expand...
Click to collapse
Agreed ...
This kernel is "ROCK" solid, and does not feel anything like a stock device. It finally feels like it should ....fast and smooth ...g
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
Used on Jamie's pa ROM and nightlies and I love this kernel rarely get reboots now and has the real butter feel. I don't even need to oc, using 01/14 nightly and xposed app for per app dpi. If u r still having issues do a clean install and wipe internal storage. Be sure to back up or internal 1st please
ZacksBuilds said:
I loaded the JB kernel and have been getting screen freezes after about a minute of use and i have to force reboot. Any help?
Click to expand...
Click to collapse
Running 1/14/2013 and I get the same issue. The older 2.3.5 kernel has no trouble.
Also, while the kernels bench great and feel smooth, I've noticed audio pops with the headphone jack that don't show up with the stock CM10. Probably just some sort of IO priority issue somewhere but unfortunately a problem for me.
ChronoReverse said:
Running 1/14/2013 and I get the same issue. The older 2.3.5 kernel has no trouble.
Also, while the kernels bench great and feel smooth, I've noticed audio pops with the headphone jack that don't show up with the stock CM10. Probably just some sort of IO priority issue somewhere but unfortunately a problem for me.
Click to expand...
Click to collapse
I got several random reboots and freezes per day on every combination of JB ROM and kernel.....except the 3.0 redux kernel. been running fro several days now with no reboots or freezes.
Ditto on the 3.0 redux.......2 days solid now on CM latest nightly....
It's perfect...g
This may sound dumb, but where exactly do I OC the GPU? I'm still using SetCPU and I heard it doesn't work that well on JB. What do you guys use for profiles, undervolting, etc?
Kraize said:
This may sound dumb, but where exactly do I OC the GPU? I'm still using SetCPU and I heard it doesn't work that well on JB. What do you guys use for profiles, undervolting, etc?
Click to expand...
Click to collapse
GPU is already oc'd by default. Nothing to do but enjoy.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

[Q] Which ROM are you using currently as your daily?

There a few good choices out right now, I'm curious to hear what rom Rezound users are using as their daily? Which rom are you using, for how long, what problems are you experiencing or have experienced and your current settings that are making your phone run so smooth?
We also have Beanstalk, XenonHD, Infection, PAC-Man, Tron, Rage, 10.1 & 10.2. I'm currently on LiquidSmooth, been on it for the past few weeks and it seems this could be the one, I'm tired of changing from rom to rom due to bugs.
Hopefully this thread can share others stories and opinions which can help in choosing a solid daily rom to use.
Ecliptic rez v9 for a few months now. No problems at all.
Very happy.
Sent from my Nexus 7 using xda app-developers app
I am running an XA revision model. S-on. Clean flashed Infection and funky kernel (flashing updates as they come) with HTC dumlock TWRP (temp s-off).
I have two batteries (laza two battery and charger combo), so I switch them out frequently as to not have one wear faster than the other. I swap about one or two times a day (essentially rebooting my phone two times a day).
I have had no issues with this ROM. Been running 2.9.1 since release.
Sent from my Infected Rezound using xda app-developers app
I have tried all of those mentioned in the poll, and am now back on Infection with Funky 3.8. 384 min 1512 max and row scheduler, I have experienced no problems or re-boots now for two weeks.
Bryon
I've used Infection, Tron and a few sense roms, but currently I'm running Beanstalk, which is my favorite so far. Stable and fast.
Although the first 4.3 rom showed up! We'll have to keep our eyes on those.
Sent from my ADR6425LVW using xda premium
I'm running ecliptic this week...
I've been getting a lot of reboots on Liquid Smooth. I don't know what's going on as it was going fine for a while now. But like I said, now my phone get extremely hot, reboots a lot and my biggest concern is the screen tear. My phone will flicker sometimes and it looks looks like streaks going down my phone screen. Maybe I should try a new kernel?
Sent from my ADR6425LVW using Tapatalk 2
Using liquid smooth with latest funkybean. ROM runs smooth and perfect
Been running it since the early builds and will probably never switch again
Sent from my ADR6425LVW using xda app-developers app
Been using micomods stock rooted with bloatware removed and funkykernel.
Sent from my ADR6425LVW using xda app-developers app
@synisterwolf runs every rom at once!!!!
Me. Stock cm10.2
Flyhalf205 said:
@synisterwolf runs every rom at once!!!!
Me. Stock cm10.2
Click to expand...
Click to collapse
SHHH.
I usually run PAC, and am currently on izzaeroth's build of it, has been extremely stable for me. I've been running it for over a week, which is a pretty long time for me, but I've had no SoD's, no bootloops, no problems.
I've flashed most of the roms up here, and I always go back to PAC for the options. No offense to Neo, but his roms are the only ones that give me bootloops, so I've kinda been avoiding them lately.
I had been running Infection flawlessly (Built in kernel at 384Mhz minimum clock, default overclock built into ROM) until my contract ran out, then I switched my personal phone from a Rezound to a GSM unlocked phone on Net10 (HTC Aria right now, but a SGS2 Skyrocket is en route as I type). I would highly recommend it as a daily driver and good tweaker ROM.
My work Rezound is just out of warranty, and after running almost every major build here, I will likely be unlocking and switching to Liquid Smooth on that one, but that is just because I know it is rock solid stable and I want something different for a change, my employer doesn't care... Nothing wrong with Infection at all though, I would highly recommend it.
AOKP (Unofficial) - Vanilla Rom + Hiro Kernel.
zourn said:
I usually run PAC, and am currently on izzaeroth's build of it, has been extremely stable for me. I've been running it for over a week, which is a pretty long time for me, but I've had no SoD's, no bootloops, no problems.
I've flashed most of the roms up here, and I always go back to PAC for the options. No offense to Neo, but his roms are the only ones that give me bootloops, so I've kinda been avoiding them lately.
Click to expand...
Click to collapse
PAC v23 different than izzaeroth's build? Can you link it please?
lamborg said:
PAC v23 different than izzaeroth's build? Can you link it please?
Click to expand...
Click to collapse
It's just a newer build than the last one released by shrike as far as I can tell, it has been a little while since shrike did a build. It's buried in the PAC thread, link to post.

Categories

Resources