when i flash meanrom 4.6 and then overclock zip, when i boot up up my screen start to have fragments and start's flashing and it restarts, so anyone how what is the problem, im s off with lazy panda.
jarocho151 said:
when i flash meanrom 4.6 and then overclock zip, when i boot up up my screen start to have fragments and start's flashing and it restarts, so anyone how what is the problem, im s off with lazy panda.
Click to expand...
Click to collapse
Its possible that your phone is more sensitive to an overclock than others. Some just don't like it. You should be able to boot into recovery and flash the rom, just wipe cache, dalvik and system. You will still have all your settings but you will be back to the base kernel.
jarocho151 said:
when i flash meanrom 4.6 and then overclock zip, when i boot up up my screen start to have fragments and start's flashing and it restarts, so anyone how what is the problem, im s off with lazy panda.
Click to expand...
Click to collapse
my phone does the same thing when i install that kernel, the lock screen flashes once when booting. but that is the only thing i notice. i dont believe i have seen any artifacts after my phone is booted up.
just reflash the rom if you seem to be having problems and it will put the stock kernel back.
jarocho151 said:
when i flash meanrom 4.6 and then overclock zip, when i boot up up my screen start to have fragments and start's flashing and it restarts, so anyone how what is the problem, im s off with lazy panda.
Click to expand...
Click to collapse
Yea some phones don't play well being OC'ed
i think/believe that in the old base, my phone was able to overclock over 1.8Ghz. Do you think it could be the kernel?
my memory is a bit blurry, had the og and the 3D so its hard to remember. thanks for the response.
jarocho151 said:
i think/believe that in the old base, my phone was able to overclock over 1.8Ghz. Do you think it could be the kernel?
my memory is a bit blurry, had the og and the 3D so its hard to remember. thanks for the response.
Click to expand...
Click to collapse
try to dl it again and check the md5 to make sure they match might just be a bad dl
If it was a bad dl the file integrity would be compromised, it would most likely not work at all.
That kernel just didn't play nice with my phone I tried just about every combo of settings
Same her I think I'm just going to wait it out, I install meanrom 4.7 and overclock still not working, I guess its a miss voltage or something. I hope I could overclock my phone soon.
Fx 8150 overclock to 4.5Ghz
Sent from my EVO using xda premium
I came from stock rom and evilz kernel and had no problem with oc up to 1.9 and everything ran smooth. With MR I can't run any oc. Rom without oc is smooth as silk it just won't accept oc which leads me to believe the oc just doesn't play well with MR on my phone. I can oc, just not with MR! I'm s=off, lazy panda and have tried clean install plus dirty flash all the way from 4.0. It's not that my phone won't oc, it just won't oc with MeanRom! Hmmm, guess I'll just have to wait a while and continue to try with each new update. Even with all that, I'll continue to stay cause this rom IS VERY SMOOTH! Thanks for all your efforts Mike!
Sent from my EVO using XDA
jdonmc1948 said:
I came from stock rom and evilz kernel and had no problem with oc up to 1.9 and everything ran smooth. With MR I can't run any oc. Rom without oc is smooth as silk it just won't accept oc which leads me to believe the oc just doesn't play well with MR on my phone. I can oc, just not with MR! I'm s=off, lazy panda and have tried clean install plus dirty flash all the way from 4.0. It's not that my phone won't oc, it just won't oc with MeanRom! Hmmm, guess I'll just have to wait a while and continue to try with each new update. Even with all that, I'll continue to stay cause this rom IS VERY SMOOTH! Thanks for all your efforts Mike!
Sent from my EVO using XDA
Click to expand...
Click to collapse
I'm on MR v4.4.2 which has the EvilZ kernel I'm OC'd @1.9 with no issues I love it so much I have not updated
I'm getting over 20 hours with 3 hours of screen on
Sent From My POS MoPho
the problem is that it is under-volted too much for some phones, if you can boot up and get to system tuner or some other app and bump up the voltage 25-50mv it should work, it did for me after a week of trying with screen tearing and constant lock-ups and reboots. if i helped hit thanks please!
Thanks, I'll give that a try later this afternoon.
Sent from my EVO using XDA
Ok, jacked the voltage up 25mV and still was a little unstable. Went ahead and raised it 50mV and so far it's holding solid. Will keep you posted. Thanks again!
Sent from my EVO using XDA
Related
What's up everyone?
Just wanting to see if people have been able to overclock past 1.8 successfully. And by that I mean no lag, reboots, and runs faster then 1.2 lol. I remember with the OG Evo that 1.19 was more or less the most you could get out of the phone. I can get to 1.8 on most overclocking kernels, just wondered if anyone got higher. I personally use net's kernel, silverneedle, and I must say it's rather nice.
And no, this isn't supposed to be an overclocking vs. not overclocking type of thread (sorry trolls :]). People are going to overclock because it's fun.
Bamba1260 said:
What's up everyone?
Just wanting to see if people have been able to overclock past 1.8 successfully. And by that I mean no lag, reboots, and runs faster then 1.2 lol. I remember with the OG Evo that 1.19 was more or less the most you could get out of the phone. I can get to 1.8 on most overclocking kernels, just wondered if anyone got higher. I personally use net's kernel, silverneedle, and I must say it's rather nice.
And no, this isn't supposed to be an overclocking vs. not overclocking type of thread (sorry trolls :]). People are going to overclock because it's fun.
Click to expand...
Click to collapse
I've messed around some, I can get 1.83 stable for daily use. My phone will reboot 100% of the time using CF bench at that speed, but never with any other app.
Sent from my PG86100 using Tapatalk
2050 here buzzing by
Sent from my PG86100 using XDA App
That's awesome! Rom/kernal, if I may?
havent tried more than 1.7, running 1.5 now, for what i use the phone for i have no need to go any higher really.
2k4mach said:
havent tried more than 1.7, running 1.5 now, for what i use the phone for i have no need to go any higher really.
Click to expand...
Click to collapse
Same here, I run at 1.5 all day.
mine rebooted at 1.8 with rcmix
Bamba1260 said:
That's awesome! Rom/kernal, if I may?
Click to expand...
Click to collapse
Synergy,rcmix 2.0
Was on mag's rom with same
Sent from my PG86100 using XDA App
Do you use the same kernel that Your ROM provides or do you branch off and use another?
I use the AnthraX kernel with CleanROM 1.7.5 and my rezound flies
http://forum.xda-developers.com/showthread.php?t=1506892
If you're running the latest ICS leaks, it's the one that came with it or SebastianFM's overclock kernel, really nothing else out there since the source code hasn't been released for ICS kernels yet.
mjones73 said:
If you're running the latest ICS leaks, it's the one that came with it or SebastianFM's overclock kernel, really nothing else out there since the source code hasn't been released for ICS kernels yet.
Click to expand...
Click to collapse
Ah never knew the kernal codes weren't released
Sent from my ADR6425LVW using xda premium
My setup is in my sig.
im still on GB and i run that bamf cubed kernel, seems very stable.
anthrax kernel on cr 1.75 gb as well. GREAT combo for emulation and overall app compatibility btw
I tried anthrax for a while but my system reset or boot looped at least once every 24 hours.
That doesn't work for me. I flashed to incredikernel 6 the day it was released and it has been 100% totally stable ever since. My system will basically run indefinitely without a reboot at this point.
Whenever I flash a new ROM or kernel, the first thing I do is run stability test v2.3 all night on it. If it's still running after that, I know it's good to go.
I had been running Incredikernel 6, and it was super stable.
I'm on Incredikernel 3-1 right now, its still really stable. I had a couple bootloops, but that was from playing with the voltages Backed off on the voltages a bit, its all good now.
Sent from my ADR6425LVW using XDA
jmorton10 said:
I tried anthrax for a while but my system reset or boot looped at least once every 24 hours.
That doesn't work for me. I flashed to incredikernel 6 the day it was released and it has been 100% totally stable ever since. My system will basically run indefinitely without a reboot at this point.
Whenever I flash a new ROM or kernel, the first thing I do is run stability test v2.3 all night on it. If it's still running after that, I know it's good to go.
Click to expand...
Click to collapse
I've never had 1 reboot or bootloop with AnthraX.
I am running the 3.0.16 kernel from Sebastian so far with no problems. Prior to that, I was using the stock HTC kernel from the leak before the last supposedly "official" leak..
a.mcdear said:
I am running the 3.0.16 kernel from Sebastian so far with no problems. Prior to that, I was using the stock HTC kernel from the leak before the last supposedly "official" leak..
Click to expand...
Click to collapse
I'm currently on that kernel aswell
Sent from my ADR6425LVW using xda premium
dogredwing1 said:
I've never had 1 reboot or bootloop with AnthraX.
Click to expand...
Click to collapse
How long have you run without rebooting??
The problems I had with anthrax seemed to be exactly the same as about half the posters in the thread on it.
I was checking every day for a while to see if it was updated, but it has been over a month with no updates & I think it's been abandoned at this point.
jmorton10 said:
How long have you run without rebooting??
The problems I had with anthrax seemed to be exactly the same as about half the posters in the thread on it.
I was checking every day for a while to see if it was updated, but it has been over a month with no updates & I think it's been abandoned at this point.
Click to expand...
Click to collapse
I ran it about a week without rebooting. The dev account has been disabled you can check infectedrom.com for more info about anthrax kernel
*updated to 0.4*
-Added Roaming fix that does not break 3D.
-Thats all folks!
*updated to 0.3* once again, eh not much but here...
-Added Reboot to recovery option.
-Reduced overall footprint sized and cleaned up some apks.
-Optimized a couple framework jars.
-Eh thats enough for now.
*updated to 0.2* eh not much but here...
-Cleaned up ramdisk.
-Removed MMS compression.
-Up'd MMS limit.
-Removed some unused scripts.
-Removed ADB icon.
-Removed GPS icons. (still shows when connected to sats)
-Cleaned up/removed some other unused files.
-Added Flashlight.
-Probably more that i am forgetting.
No need to wipe if coming from 0.1, 0.2, or 0.3 although a wipe to cache and dalvic wont hurt.
Based off leaked vm rom. Yall should know what to do by now, if not dont flash this.
*NO YOU DO NOT NEED THE UPDATED FIRMWARE TO RUN THIS ROM*
Not much has been changed, removed some bloat, added working vvm, and made the rom work
EDIT: Phone will Reboot once on first install. Dont be scurred!
http://d-h.st/Ff4
-deck
Aww yeah, Beats!
kushdeck said:
Based off leaked vm rom. Yall should know what to do by now, if not dont flash this.
http://d-h.st/k5U
-deck
Click to expand...
Click to collapse
features??? differences from other builds?
ikr, u said it all
YOU THE MAN
Sent from my PG86100 using xda premium
Aww ****...
Lemme hit your ass with some thanks right off the jump.
You make any changes?
Oh yeah!
Sent from my PG86100 using Tapatalk 2
missed ya kush
will try out this rom in a bit
Do i just gui the kernel.then flash rom?
Can I flash this on hboot 1.5 s-on ?
Sent from my PG86100 using xda premium
iDannyPR said:
Can I flash this on hboot 1.5 s-on ?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Yes, you can. No need to flash firmware update.
Now deck's on the ICS side, development keeps growing fast
Inviato dal mio PG86100 utilizzando Tapatalk
Works great
Working very fast and stable so far. Usually I can't stand sense roms but ICS Sense is very stock-like and I think I can actually live with this for a while! Today was a good day!
I would jump ship to a true AOSP ICS rom with working camera in a heartbeat though
edit: face unlock is awesome!!!
I'm HBOOT 1.4 S-OFF now after spending all day downgrading it, flashed freezas firmware update before flashing this as well. Wasn't sure if all of it was necessary or not, but decided it was for the best to take 1.5 S-ON out of the equation. Recovery is CWM-5.0.2
The very first time I booted it, it almost seemed to hot reboot once. I was afraid I was stuck in a bootloop. Turns out it was fine.
Rom is running smooth and pulling high 2600's in Quadrant. Looks like it can do better after enabling the second CPU which I haven't done yet.
As soon as a Sense 4.0 or Non-Sense ICS is available(stable), I'll probably jump though.
isnt the leak 3.6 not 4.03?
kaos420 said:
isnt the leak 3.6 not 4.03?
Click to expand...
Click to collapse
Sense 3.6 over Android 4.0.3.
Sent from my PG86100 using Tapatalk 2
spanky34 said:
I'm HBOOT 1.4 S-OFF now after spending all day downgrading it, flashed freezas firmware update before flashing this as well. Wasn't sure if all of it was necessary or not, but decided it was for the best to take 1.5 S-ON out of the equation. Recovery is CWM-5.0.2
The very first time I booted it, it almost seemed to hot reboot once. I was afraid I was stuck in a bootloop. Turns out it was fine.
Rom is running smooth and pulling high 2600's in Quadrant. Looks like it can do better after enabling the second CPU which I haven't done yet.
As soon as a Sense 4.0 or Non-Sense ICS is available(stable), I'll probably jump though.
Click to expand...
Click to collapse
You didn't need to flash firmware. fyi
like the features and runs good but volume is way to low after having xloud
hope we can get this louder and im staying then....
metalmenance said:
like the features and runs good but volume is way to low after having xloud
hope we can get this louder and im staying then....
Click to expand...
Click to collapse
Use qpst to raise the max volume level, theirs a tutorial in development. I did it and its simple. My 3d is louder than my og EVO was, both speakers.
Edit.... Here ya go http://forum.xda-developers.com/showthread.php?t=1147436
Oh yea. Loving all the sense ics choices downloading now.
Sent from my PG86100 using XDA
Hello, I've been having difficulty installing any JB roms on my Photon. I've tried to install both CNA and AOKP Jelly bean roms, and they both hang on the bootanimation, and make my Photon feel really hot. I was able to get a CM9 rom to install, and it turned on in about a minute and worked perfectly. Am I missing a step or something that's preventing JB from working?
Ke0n said:
Hello, I've been having difficulty installing any JB roms on my Photon. I've tried to install both CNA and AOKP Jelly bean roms, and they both hang on the bootanimation, and make my Photon feel really hot. I was able to get a CM9 rom to install, and it turned on in about a minute and worked perfectly. Am I missing a step or something that's preventing JB from working?
Click to expand...
Click to collapse
You didn't wipe before flashing?
Sent from my MB855 using xda app-developers app
I'm having the same exact issue. I've tried MIUI, AOKP and Paranoid Android and all 3 just hang on the boot animation till I end up battery pulling and starting over.. I do a full wipe and also do cache and dalvick. I've just resorted to installing HybridGBv20 unlocked and it booted right up but aosp is a no go. I know on my evo there was an issue with sdcard partitioning but I don't think that has ever been discussed whenever I'm reading directions for these roms. I also don't have an sdcard just using internal. Thank for any help. Really wanna try one of these aosp roms out . Thank you in advance!
Ke0n said:
Hello, I've been having difficulty installing any JB roms on my Photon. I've tried to install both CNA and AOKP Jelly bean roms, and they both hang on the bootanimation, and make my Photon feel really hot. I was able to get a CM9 rom to install, and it turned on in about a minute and worked perfectly. Am I missing a step or something that's preventing JB from working?
Click to expand...
Click to collapse
Drop the processor to 1ghz. Sounds like maybe yours can't handle being overclocked.
Sent from my MB853 using XDA
I've seen no option in aroma or anywhere where you can adjust speeds. Where you doin that at?
xsisbest said:
I've seen no option in aroma or anywhere where you can adjust speeds. Where you doin that at?
Click to expand...
Click to collapse
In the ROM. Install cm9. Drop the speed. Flash cm10 over it. You gotta play around to find a solution my friend. Do things that seem dumb like dirty flashing.
Sent from my MB853 using XDA
My experience with dirty flashes has always been nightmares but ill give it a go I guess. I would assume most if those Roms come with stock voltages. I'm also using Tue default kernel but did try jokers 1.3 and 1.4. I'll give it a shot I guess. The wife is liking the current tom but I would love to see aosp on it.
sent from my EVO 4g LTE minus the LTE
xsisbest said:
My experience with dirty flashes has always been nightmares but ill give it a go I guess. I would assume most if those Roms come with stock voltages. I'm also using Tue default kernel but did try jokers 1.3 and 1.4. I'll give it a shot I guess. The wife is liking the current tom but I would love to see aosp on it.
sent from my EVO 4g LTE minus the LTE
Click to expand...
Click to collapse
i've seen a few who have had this problem. some devices just can't handle the 1.3ghz. so it's possibly that. dirty flashing will maybe give you the answer when you drop to 1ghz. hope you get it going!
Thanks, ill definitely post back my results. Might wait till the weekend to try though.
sent from my EVO 4g LTE minus the LTE
I am flashing it atm and was wondering if any of you people tried with cm10 ROMs. P.S. sorry if this is in the wrong section.
ROM: CM10 Nightlies & Flapps ICS
Kernel: Hotcakez v3.0 1.83ghz OC
Recovery: TWRP2
Give Thanks To Help full Post
Most likely everyone has. Great kernel, great governors
Sent from my SAMSUNG-SGH-I717 using xda premium
How's the stability on it? Have you experienced any RR in a day or two on cm10? Just wondering
ROM: CM10 Nightlies & Flapps ICS
Kernel: Stock. & Hotcakez 1.8ghz OC
Recovery: TWRP2
Give Thanks To Help full Post
i think flappjaxx (sorry if misspelled) is the best JB action you can get at the moment. Ive tried just about every rom/ kernel out there. His latest is just awesome. 2 days and 19 hours I have been running his rom and kernel. I have it overclocked to 1.83 and used his gpu overclock tool . The thing just flies!! Awesome battery life and not a single reboot yet. I have no reason to switch to anything else at the moment.
joverclock said:
i think flappjaxx (sorry if misspelled) is the best JB action you can get at the moment. Ive tried just about every rom/ kernel out there. His latest is just awesome. 2 days and 19 hours I have been running his rom and kernel. I have it overclocked to 1.83 and used his gpu overclock tool . The thing just flies!! Awesome battery life and not a single reboot yet. I have no reason to switch to anything else at the moment.
Click to expand...
Click to collapse
Correct...
FJ has great skills, and is always generous beyond his means...
Donate much, donate often, to "all" of our generous developers.
And while I have called out FJ here, I in no way want to give the impression that I don't appreciate all of the great work here, from developers, to every day users...
Thank you !!....g
I have to agree... not a single random reboot since I loaded his 3.0 kernel and the 1/7 nightly.... I think his latest CM comitts and tweaks have fixed the CM bug that's been a PITA for everyone!
Great work FJ and welcome back to XDA!
bhaskell said:
I have to agree... not a single random reboot since I loaded his 3.0 kernel and the 1/7 nightly.... I think his latest CM comitts and tweaks have fixed the CM bug that's been a PITA for everyone!
Great work FJ and welcome back to XDA!
Click to expand...
Click to collapse
I loaded the JB kernel and have been getting screen freezes after about a minute of use and i have to force reboot. Any help?
joverclock said:
i think flappjaxx (sorry if misspelled) is the best JB action you can get at the moment. Ive tried just about every rom/ kernel out there. His latest is just awesome. 2 days and 19 hours I have been running his rom and kernel. I have it overclocked to 1.83 and used his gpu overclock tool . The thing just flies!! Awesome battery life and not a single reboot yet. I have no reason to switch to anything else at the moment.
Click to expand...
Click to collapse
Give Thanks!
Rom: Flapps ICS ROM
Kernel: Flapps kernel OC 1.8Ghz
Recovery: TWRP2
Why have cm10 night lies stopped at 1-07-13?
Not seeing "any" issues here at all...
Verify your download again, and full wipe/flash again if needed.....the kernel is as stable as any kernel I've used to date....g
bhaskell said:
I have to agree... not a single random reboot since I loaded his 3.0 kernel and the 1/7 nightly.... I think his latest CM comitts and tweaks have fixed the CM bug that's been a PITA for everyone!
Great work FJ and welcome back to XDA!
Click to expand...
Click to collapse
Agreed ...
This kernel is "ROCK" solid, and does not feel anything like a stock device. It finally feels like it should ....fast and smooth ...g
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
Used on Jamie's pa ROM and nightlies and I love this kernel rarely get reboots now and has the real butter feel. I don't even need to oc, using 01/14 nightly and xposed app for per app dpi. If u r still having issues do a clean install and wipe internal storage. Be sure to back up or internal 1st please
ZacksBuilds said:
I loaded the JB kernel and have been getting screen freezes after about a minute of use and i have to force reboot. Any help?
Click to expand...
Click to collapse
Running 1/14/2013 and I get the same issue. The older 2.3.5 kernel has no trouble.
Also, while the kernels bench great and feel smooth, I've noticed audio pops with the headphone jack that don't show up with the stock CM10. Probably just some sort of IO priority issue somewhere but unfortunately a problem for me.
ChronoReverse said:
Running 1/14/2013 and I get the same issue. The older 2.3.5 kernel has no trouble.
Also, while the kernels bench great and feel smooth, I've noticed audio pops with the headphone jack that don't show up with the stock CM10. Probably just some sort of IO priority issue somewhere but unfortunately a problem for me.
Click to expand...
Click to collapse
I got several random reboots and freezes per day on every combination of JB ROM and kernel.....except the 3.0 redux kernel. been running fro several days now with no reboots or freezes.
Ditto on the 3.0 redux.......2 days solid now on CM latest nightly....
It's perfect...g
This may sound dumb, but where exactly do I OC the GPU? I'm still using SetCPU and I heard it doesn't work that well on JB. What do you guys use for profiles, undervolting, etc?
Kraize said:
This may sound dumb, but where exactly do I OC the GPU? I'm still using SetCPU and I heard it doesn't work that well on JB. What do you guys use for profiles, undervolting, etc?
Click to expand...
Click to collapse
GPU is already oc'd by default. Nothing to do but enjoy.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app